1957 Chevrolet Two-Ten Series Engine Parts
More 1957 Chevrolet Two-Ten Series Engine Parts Categories
If you’re looking for an original Engine Parts replacement for a 1957 Chevrolet Two-Ten Series, you can search through our selection below. You’ll also find aftermarket and OEM Engine Parts to meet your needs.
Essential 1957 Chevrolet Two-Ten Series Engine Parts
Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 10058)
from
$20.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- RIGHT TYPE — Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
- QUALITY MATERIALS — Each valve stem seal features materials based on the specific application for your vehicle repair
- ENGINEERING EXPERTISE — Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
- INSTALLATION AID — Installation tool included to protect inner lip of seal from damage during seal installation
- COVERAGE — Available for domestic and foreign nameplate vehicles
Sealed Power – Engine Piston Ring Set (Part No.E-240X 40)
from
$56.99
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Unsurpassed quality that you can trust
- Uses leading edge materials
- State-of-the-art manufacturing
- Exacting tolerances
- Meets or exceeds OEM specifications
Spartan – Engine Long Block; Chev 283 60-67 Engine (Part No.DC46)
from
$2073.99
Remanufactured Engines are fully disassembled; heads, blocks, cranks & cams are machined & wear parts are replaced. Each engine is individually tested after assembly to assure compression, oil pressure and water jacket integrity.
Product Features:
See More
Product Features:
- Each engine we remanufacture is essentially reverse engineered – in part to discover original factory deficiencies. If possible, our seasoned R&D personnel & QC experts make improvements. Why shouldn’t our engine last longer than your first?
- Engines come with installation gasket set & oil pump unless noted otherwise. If we have important installation information it will be included on tags or in the paperwork packaged with your engine.
- Engines are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
- Each engine is remanufactured with quality OE level components not “white” box generic parts that may or may not satisfy your needs and expectations. When you use the best you get the best results and satisfaction.
Mr. Gasket – Cam Button Spacer (Part No.1180)
from
$15.99
Mr. Gasket cam buttons are an absolute necessity for roller cam conversions and useful to maintain accuracy in any cam installation. Cam buttons keep the camshaft from moving in and out and causing erratic timing. A camshaft button, or camshaft thrust bumper installs into the hole in the front end of the camshaft and prevents camshaft walk in roller camshaft applications. Flat tappet cams are ground with a small angle in the lobes that puts a side load on the camshaft. Without this a camshaft has a natural tendency to move or walk, out of the block when rotating. Roller cam lobes can’t be ground that way so engines originally equipped that way usually use a retainer plate to secure them. The camshaft button serves the same purpose, but it does so by contacting the timing cover to prevent movement. If you have an engine already converted, a worn or missing cam thrust bumper will result in too much end play, resulting in erratic timing and should be checked.
Product Features:
See More
Product Features:
- Mandatory to prevent cam walk in roller cam conversions
- Helps maintain accurate timing
- Made from aluminum
Cloyes Gear – Engine Timing Gear Set (Part No.2516S)
from
$61.99
Timing Gear Set includes all components for a quick and efficient replacement
Product Features:
See More
Product Features:
- Utilizes the latest in design and technology to offer complete chain sets
- CAD designed and manufactured using premium materials
- Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
- Meet or exceed OEM performance requirements, ensuring a quiet and maintenance-free experience
- Refer to our online catalog for detailed application-specific information
- Set Includes: Camshaft Gear, Crankshaft Gear.
Edelbrock – Complete Sure Seat Valve Spring Kit for Chevy 262-400 V8 1957-95 (Part No.5794)
from
$151.99
Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks are black oxide coated. Non-rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.
Product Features:
See More
Product Features:
- Complete Kit: Includes Retainers And Locks
- Springs Made of Highest Quality Spring Wire
- Springs Precision Wound To Close Tolerances
- Includes Superior Quality Steel Retainers
- Includes 7 deg. Heat-Treated Valve Stem Locks
- Retainers and Locks Black Oxide Coated
- Non-Rotator Style: Dyno Tested and Street Proven
- Great Match to Edelbrock Camshaft Kit
Spectre – Dipstick; Oil Pan (Part No.4255)
from
$12.99
Spectre’s Chevrolet dipstick is designed to fit 1955 – 1979 265 – 400 short block engines. The housing and handle are triple chrome-plated steel, and the dipstick features a gold iridite finish for clear accurate oil level readings. This dipstick is made to meet OEM specifications for form, fit and function and feature an adjustable bracket for easy installation.
Product Features:
See More
Product Features:
- Fits 1955 – 1979 Chevy short block engine
- Designed to meet OEM specifications
- Gold iridite dipstick
- Chrome plated housing and handle
- Dipstick is easy to read for accurate oil level readings
Mr. Gasket – Engine Oil Pan (Part No.9425)
from
$108.99
This Mr. Gasket Oil Pan comes natural unfinished steel and includes the drain plug, washers & bolts. Original equipment style with stock depth and capacity. Oil pan gasket, dipstick and tube sold separately.
Product Features:
See More
Product Features:
- Small Block Chevy 283-350 1955-’79
- Drivers Side Dipstick
- OEM Style – Stock Depth & Capacity
Cloyes Performance – Engine Timing Cover (Part No.9-221B)
from
$47.99
Machined Aluminum Center Plate; Threaded for Rollerized Cam Button; Grooved for O-Ring Seal; Meets or exceeds OEM performance requirements; Cloyes utilizes the latest in design and material technology, ensuring quiet and maintenance-free experience.
Product Features:
See More
Product Features:
- Machined Aluminum Center Plate
- Threaded for Rollerized Cam Button
- Grooved for O-Ring Seal
- Meets or exceeds OEM performance requirements
- Cloyes utilizes the latest in design and material technology, ensuring quiet and maintenance-free experience.
ARP Auto Racing – 1.75"Oal Stud, 0.8"D Adjuster Third, 3/8"-24, 7/16"-14, 0.7"D Screw-In, Set Of 16 (Part No.134-7101)
from
$59.99
If you have ever installed a rocker stud into a cylinder head and watched it wobble as it screwed in, you knew from the beginning that the rocker geometry was going to be inconsistent all over the place. ARP rocker studs are concentric within 0.005 T.I.R. thread pitch to thread pitch. They run in straight and true. Lengths are exact designed to provide positive seating every time. An extra large radius base offers greater resistance to flex. Available in both High Performance and Pro Series models. To be used with ARP patented Perma Loc(TM) adjusters.
Product Features:
See More
Product Features:
- Made Of 8740 Chrome Moly Forgings
- Heat Treated To 180,000 PSI
- Excellent For Elapsed Time Bracket Racing, Limited Rule Oval Track Competition And Street Use
- Lengths Are Exact Designed To Provide Positive Seating Every Time
- Set of 16
- .800″ Adjuster Thread Length
- 3/8-24 Shank Diameter and Thread
- 3/8″ Typical Small Block Application
Cloyes Performance – High Performance Timing Chain (Part No.9-130)
from
$71.99
High Performance 3/8″ Pitch Double Roller Replacement True Roller Chain. 0.250 in. Roller Diameter. Heat Treated and Processed Links to Maximize Ultimate Breaking Strength while Remaining Ductile for Toughness. Prestressed to Increase Fatigue Life.
Product Features:
See More
Product Features:
- A timing chain synchronizes the rotation of the crankshaft and camshaft(s), ensuring proper timing of the engines valve events for each cylinder.
- Our chains are engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
- From stock replacement to high performance, Cloyes has the most complete timing chain catalog
- Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
- Cloyes recommends the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced as these components play a vital role in system stability and accurate timing
- Refer to our online catalog for detailed application-specific information
- Keep your engines valvetrain in perfect time with Cloyes, the world leader in timing drive systems
Sealed Power – Engine Rocker Arm Kit (Part No.R-826)
from
$3.49
Sealed Power parts provide innovative designs, use leading-edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Complete rocker arm assembly
- 1 Arm
- 1 Ball
- 1 Nut
- Utilizes ISO & QS certified manufacturing
Edelbrock – SuprChrg (Part No.1551)
from
$3552.99
SuprChrg
Mr. Gasket – Special Cam Bolt (Part No.944G)
from
$12.99
These Mr. Gasket cam bolt kits feature specially hardened bolts to keep the cam button secure so the cam won’t walk out of place. Can also be used as original equipment replacement. Includes three 5/16 inch-18 x 3/4 inch Long Grade 5 Bolts with Black Oxide Finish.
Product Features:
See More
Product Features:
- Black oxide coated Grade 5 steel
- Includes flat washers to secure Mr. Gasket cam buttons 1180, 1181 and 1183
- Can be used as OE replacement
Melling Select Performnce – High Performance Cast Iron Standard Billet Gear Anti-Cavitation Racing Oil Pump (Part No.10990C)
from
$249.99
Melling high performance oil pumps provide dependable performance every time in every application under the toughest RPM conditions. The Melling high performance cast iron oil pump series features a doweled housing and cover, extended drive and idler shaf
Product Features:
See More
Product Features:
- 25% Higher volume anti-cavitation high performance upgrade of the M-99HVS
- CNC machined phosphate coated cast iron housing and cover
- Cover has extended idler shafts for additional support at high RPM’s
- Standard billet steel spur gears
- Manufactured with anti-cavitation grooves to prevent cavitation at low RPM’s
- Adjustable pressure relief valve
- Includes lower pressure spring; not installed
- Includes chrome moly steel intermediate drive shaft with steel guide
- Uses 3/4 inch diameter press-fit screen
- For racing applications only
- Warning: Using this pump will reduce oil pressure at idle
Sealed Power – Engine Crankshaft Main Bearing Set (Part No.960M 30)
from
$80.99
Sealed Power« Vintage components provide coverage for applications over 35 years old, restoring classics with like new performance. Leading edge materials, ISO & QS certified manufacturing ensures performance and longevity for treasured engine rebuilds.
Product Features:
See More
Product Features:
- Steel-backed bronze alloy lining with overplate
- Popular for fatigue resistance & strength – provides conformability required for older applications
- State-of-the-art manufacturing
- Exacting tolerances
- Meets or exceeds OEM specifications
ARP Auto Racing – For Use With Chevy Small Block With Standard 2 Piece Cork Gasket (Part No.234-1802)
from
$37.49
The engineers at ARP spent quite a bit of time developing these highly effective, unique oil pan studs. They are designed to make it as easy as possible to install a pan and seal it properly. You will note that the studs have a radiused bullet nose that serves to locate the pan rails, then allow the nuts to be easily installed without the worry of cross threading. For those who prefer bolts, ARP got you covered, too. Both are available in black oxide finished chrome moly steel or rust proof stainless steel. Also, you may choose between conventional hex style or the space saving 12 point nuts. The stud kits come complete with a special locking flanged nut, while the bolt kits come with washers.
Product Features:
See More
Product Features:
- Designed To Make It As Easy As Possible To Install A Pan And Seal It Properly
- Bolt Kits Come With Washers
- Stud Kits Come Complete With A Special Locking
- Easily Installed Without The Worry Of Cross-Threading
Sealed Power – Engine Connecting Rod Bearing (Part No.2020CP)
from
$7.29
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Steel-backed bronze alloy lining with overplate
- Popular for fatigue resistance & strength
- Provides conformability required for older apps
- Our standard material is comparable to competitors performance bearing
- Note – This material offers less resistance to wear & corrosion than other materials.
- Utilizes ISO & QS certified manufacturing
Felpro – Cylinder Head Gasket Set (Part No.HS 7733 PT-2)
from
$35.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Head sets contain gaskets and seals necessary for a valve grind or head reconditioning job
- Application specific design to ensure a perfect fit and premium seal
- Premium quality parts you can trust
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Contains all the parts needed to complete the repair unless otherwise noted
Edelbrock – Performer RPM 410 Top End Kit for 1957-86 Small-Block Chevy 350 Engines (Part No.2098)
from
$3990.99Product Features:
- Matched Parts Available Under One Part Number
- All In One Box Convenience
- Make Things Easier In Parts Selection
- Includes Almost Everything You Need
Spectre – Valve Cover (Part No.5321)
from
$8.99
Spectre’s Valve Cover Spreader Bar Kits are designed to improve the seal between your valve cover and cylinder head. Constructed from high quality heavy gauge steel, the spreader bars help to evenly distribute clamping pressure, preventing leaks. Featuring a triple chrome-plated finish, this kit is designed to fit Chevrolet 265-400 Small Block engines.
Product Features:
See More
Product Features:
- Designed for Chevrolet 265-400 Small Block engines
- Features a triple chrome-plated finish
- Constructed from heavy gauge steel
- Engineered to improve valve cover seal
Felpro – OIL PAN GASKET SET (Part No.OS 34509 T)
from
$46.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- STRONG AND DURABLE — Features molded rubber over a rigid carrier for durability, precise alignment and fit
- SUPERIOR SEAL — Proprietary molded rubber design helps to eliminate leak paths, especially in problem corner areas
- EASIER TO INSTALL — One-piece construction is easier to install than multi-piece assemblies and helps reduce potential for installation errors
- INSTALLATION AID — SnapUps aid in holding the gasket in place for easy installation and allow for quick bolt tightening
- PREVENTS OVERTIGHTENING — Torque limiters help eliminate overtightening and gasket splitting and extruding
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Dorman – Steel Cup Expansion Plug 2-1/64 In. SC, Height 0.250 (sold by each) (Part No.555-046)
from
$3.49
This engine camshaft plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine camshaft plug matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Melling – Stock Replacement Oil Pump Shaft Guide (Part No.M-55005)
from
$2.99
Several Melling oil pump applications require the use of an oil pump shaft guide. Melling provides high quality shaft guides for specific pump applications. An oil pump shaft guide is necessary to connect the oil pump drive shaft to the intermediate drive shaft. Melling recommends installing a new oil pump shaft guide when it is needed.
Product Features:
See More
Product Features:
- Manufactured from high quality nylon for consistent durable wear
- Precision engineered for optimum fit and function
- Designed for long-life and worry-free performance
- Meets or exceeds original equipment specifications
Sealed Power – Engine Valve Spring Retainer Keeper (Part No.VK-115)
from
$0.43
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Unsurpassed quality that you can trust
- Uses leading edge materials
- State-of-the-art manufacturing
- Exacting tolerances
- Meets or exceeds OEM specifications
Felpro – Engine Timing Cover Repair Sleeve (Part No.16202)
from
$11.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Engine$aver Hardware cost-saving application
- Repairs worn sealing surfaces to assure a leak free repair
- Meets or exceeds all original equipment specifications
- Engineered and manufactured specifically for repair applications
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Validated for fit, form, and function
Cloyes Gear – Engine Timing Camshaft Sprocket (Part No.S288)
from
$17.99
Along with the timing chain, tensioners, and guides, sprockets are an integral component within the timing system. Timing gears and sprockets are available as part of complete timing kits as well as for individual purchase and installation
Product Features:
See More
Product Features:
- Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
- Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
- CAD designed and manufactured using premium materials
- Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
- Refer to our online catalog for detailed application-specific information
Dorman – Help – Oil Pump Bushing (Part No.90460)
from
$4.99
This engine oil pump bushing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine oil pump bushing matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Popular 1957 Chevrolet Two-Ten Series Engine Parts Categories
1957 Chevrolet Two-Ten Series Engine Parts
You count on your 1957 Chevrolet Two-Ten Series to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Engine Parts. With 300 Engine Parts ranging in price from $0.43 to $4,883.99, you’re sure to find everything you need for your 1957 Chevrolet Two-Ten Series.
Brands matter. If you want to shop a specific Engine Parts brand, we stock 18 different brands like Sealed Power, Felpro, and Mr. Gasket. 1957 Chevrolet Two-Ten Series Engine Parts start as low as $0.43!
One of the best ways to find top quality OEM or aftermarket Engine Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 1,568 extensive product reviews on 1957 Chevrolet Two-Ten Series Engine Parts. Some of the top-rated Engine Parts products we carry are OIL PAN GASKET SET with 4.8 stars and Multi Purpose Seal with 4.7 stars.
Did we mention you can order your Engine Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Engine Parts inventory for your 1957 Chevrolet Two-Ten Series below to get started!
Top-Rated Engine Parts Brands For Your 1957 Chevrolet Two-Ten Series
Trusted Engine Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1957 Chevrolet Two-Ten Series running right for years to come. In our inventory you’ll find brands like Sealed Power, Felpro, Mr. Gasket, and even more.
Popular Melling Engine Parts
You’ll find popular Melling brand products across Oil Pumps. All are waiting to get your 1957 Chevrolet Two-Ten Series back on the road. Some of the top-rated Melling products in these categories are:
Top-Rated Felpro Engine Parts
If Felpro are what you’re looking for, our inventory holds plenty. We stock Felpro brand Engine Parts for your 1957 Chevrolet Two-Ten Series, and some of our most reviewed Felpro parts include:
FAQs for 1957 Chevrolet Two-Ten Series Engine Parts
What are the most purchased Engine Parts for the 1957 Chevrolet Two-Ten Series?
Out of 300 Engine Parts for the 1957 Chevrolet Two-Ten Series, the most popular in our inventory are:
What are the top-rated 1957 Chevrolet Two-Ten Series Engine Parts?
Top-rated Engine Parts for your 1957 Chevrolet Two-Ten Series based on customer reviews/ratings are:
from
$13.29
(12)
Ultra Seal: Harmonic Balancer Bolt/Washer Kit
“What can I say about this? Oh yeah, it’s a harmonic balancer bolt. Remove the old one, replace the new, clean, shiny one.
Perfect fit.”
