1957 Chevrolet Corvette Fuel and Emissions Systems
Find Your Specific 1957 Chevrolet Corvette Fuel and Emissions Systems
Below you will find various in-demand Chevrolet Fuel and Emissions Systems, components and accessories for your 1957 Corvette. Advance Auto Parts has popular Corvette parts like Fuel Pumps, Gas Caps, Fuel Tanks and more. You’ll also find aftermarket and OEM Fuel and Emissions Systems for other Corvette model years including
2015,
2016,
2017,
2018,
2019,
2020,
2021,
2022,
2023 and more. Select a category of 1957 Chevrolet Corvette Fuel and Emissions Systems below and start saving instantly.
Popular 1957 Chevrolet Corvette Fuel and Emissions Systems Categories
Essential Fuel and Emissions Systems for 1957 Chevrolet Corvettes
Edelbrock – Pro-Flo 4 EFI 4150-Style Kit No. 35780 For Chevy Small-Block with Vortec/E-Tec Heads (Part No.35780)
from
$2500.99
The Edelbrock Pro-Flo 4 EFI Kit No. 35780 for Small-Block Chevy engines with Vortec/E-Tec cylinder heads is a fully sequential multi-port injection system designed with a fuel injector strategically positioned in each runner of the intake manifold to deliver the best fuel atomization and most even distribution to each cylinder. This system features the high-performance Victor-style single-plane intake manifold that comes preassembled with high-flow injectors, fuel rails and 4150-flange throttle body. All supporting sensors are included along with wire harnesses and ECU. The Victor manifold is designed with a larger cross-sectional area in the plenum and larger runners for high-horsepower and/or large cubic-inch applications. The manifold is also 0.75 inch taller than the standard LS3 version to promote smoother airflow into the rectangular-port heads. This kit uses 29 lb/hr injectors and is rated for 450 horsepower at 58 PSI of fuel pressure. Calibration of the Pro-Flo 4 is a simple process with a Setup Wizard providing guidance through the E-Tuner application’s initial programming. Once provided with basic information such as type of engine, cubic inches, firing order, and cam profile, the E-Tuner App then selects the most appropriate base calibration. Once the base calibration is set, the self-learning E-Tuner App takes over to continually maximize the fuel map for your specific engine configuration, even compensating for changes in altitude and weather. The E-Tuner App provides more advanced tuning options that allow precise control over cold starts and acceleration while retaining the simplicity that Pro-Flo systems are known for. The exclusive Edelbrock E-Tuner 4 app is Free and Available for Android and IOS based smart phone or tablet.
Product Features:
See More
Product Features:
- High-performance Victor-style single-plane intake manifold that comes preassembled with high-flow injectors, fuel rails and 4150-flange throttle body.
- All supporting sensors are included along with wire harnesses and ECU.
- The Victor manifold is designed with a larger cross-sectional area in the plenum and larger runners for high-horsepower and/or large cubic-inch applications.
- The manifold is also 0.75 inch taller than the standard LS3 version to promote smoother airflow into the rectangular-port heads.
- This kit uses 29 lb/hr injectors and is rated for 450 horsepower at 58 PSI of fuel pressure.
- Calibration of the Pro-Flo 4 is a simple process with a Setup Wizard providing guidance through the E-Tuner application’s initial programming.
- Once provided with basic information such as type of engine, cubic inches, firing order, and cam profile, the E-Tuner App then selects the most appropriate base calibration.
- Once the base calibration is set, the self-learning E-Tuner App takes over to continually maximize the fuel map for your specific engine configuration, even compensating for changes in altitude and weather.
- The E-Tuner App provides more advanced tuning options that allow precise control over cold starts and acceleration while retaining the simplicity that Pro-Flo systems are known for.
- The exclusive Edelbrock E-Tuner 4 app is Free and Available for Android and IOS based smart phone or tablet.
Edelbrock – Pro-Flo 4 EFI XT-Style Kit No. 35790 For 1986 & Earlier Chevy Small-Block (Part No.35790)
from
$2754.99
The Edelbrock Pro-Flo 4 XT EFI Kit No. 35790 for 1986 & Earlier Small-Block Chevy engines has the latest technology and features. The EFI system comes complete with a Pro-Flo XT intake manifold and 29 Lb./Hr injectors capable of 450 HP with 58 p.s.i. fuel pressure. Also included is a plug and play single connection distributor designed to work specifically with Pro-Flo 4 and a made in the USA fully terminated high-quality harness with clearly labeled connections for a hassle-free installation. The new Pro-Flo 4 EFI systems feature an all-new ECU with a faster processor, water proof design and is half the depth of the previous ECU. It also has an upgraded Bluetooth chip that is faster, more reliable and will not drop connection. We’ve added more features for the advanced tuner giving you control over air-fuel ratios, ignition curve, idle speed, acceleration fuel, coolant fans, Rev limiter while retaining the simplicity Pro-Flo is known for. The key to the system is our exclusive E-Tuner 4 app with dyno developed base calibrations. The E-Tuner 4 app uses a Bluetooth wireless connection to communicate with the ECU’s self-learning capability to continually adjust the calibration to get the maximize performance. E-Tuner 4 features a simple and easy to use setup wizard to help you get started as well as multiple dash displays so you can monitor your engines vitals. The exclusive Edelbrock E-Tuner 4 app is Free and Available for Android and IOS based smart phone or tablet.
See More
Dorman – Metal Fuel Tank (Part No.575-080)
from
$537.99
This replacement fuel tank is precision-engineered to match the fit and function of the original fuel tank on specified vehicles.
Product Features:
See More
Product Features:
- Reliable replacement – this fuel tank directly replaces the original fuel tank on specified vehicle years, makes and models
- Durable construction – this fuel tank is made from the same rugged materials as the original part for dependable service
- Quality assured – this part has been validated to ensure a quality fit and long service life
- Trustworthy design – backed by team of product specialists in the United States
Holley – FUEL TANKS (Part No.19-152)
from
$1193.00
FUEL TANKS
Holley – High-Flow Mechanical Fuel Pump for Street Performance (Part No.12-834)
from
$141.99
Mechanical fuel pump made from heavy duty construction for continuous high RPM operation. Fuel body casting can be rotated to accommodate various plumbing situations. Fuel pressure regulator is not required.
Product Features:
See More
Product Features:
- Street Performance
- Flows 80 gph Free Flow
- Shutoff Pressure Pre-Set 7.5 PSI
- Fuel Pressure Regulator Is Not Required
- Heavy Duty Construction For Continuous High rpm Operation
- Fuel Body Casting Can Be Rotated For Plumbing Situations
- Inlet And Outlet Tapped For 1/4 in. NPT
- Inlet/Outlet Tapped For .25 in. NPT
Delphi – Electric Fuel Pump: Grommet, Insulating Sleeve, Isolator, Pump Retainer (Part No.FE0110)
from
$129.99
Delphi is a Tier 1 supplier to the majority of global vehicle manufacturers and has been a manufacturer of dependable fuel pumps and fuel delivery parts for over 80 years. With over 30 OE-proprietary innovations and 150 patents in fuel technologies, Delphi is regarded as a market leader in North American fuel management with sales coverage at over 95%. Learn more about our expert-led training programs and tech hotline at 1-877-463-3574. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.
Product Features:
See More
Product Features:
- Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
- Delphi pumps are designed to operate under extreme temperatures with quick engine starts
- Improved pump performance as a result of Delphi’s innovative design and durability
- Restores fast pressure performance and system integrity, translating to better pumping through less energy
- Part is validated, tested and matched to the right vehicle application
- Lower amperage draws less load on vehicle’s electrical system
- Always be sure to check and clean fuel tank to avoid unnecessary returns
- Always replace the fuel strainer when doing a fuel pump repair
GM Genuine Parts – Multi-Port Fuel Injector Rail (Part No.217-1619)
from
$249.99
GM Genuine Parts Fuel Injector Rails are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
Edelbrock – Fuel Injection Fuel Rail #3627, -6 AN Black Anodized For Chevrolet Small-Block (Part No.3627)
from
$222.99
All Edelbrock fuel rails are machined from high quality extruded aluminum. Each kit includes fuel rails, stands and mounting hardware. Fuel fittings, crossover line and regulator not included. 3627 Small-Block Chevy fuel rail kit is for use with Pro-Flo X
Product Features:
See More
Product Features:
- Black AnodizedFinish
- High Capacity Fuel Rails
- For Use W/ Pro-Flo XT Manifold #7137
- -6 AN Inlet / Outlet
- Made In The USA
Felpro – Fuel Pump Mounting Gasket (Part No.6579)
from
$3.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Includes all parts needed to complete the repair
Spectre – Sbc Fuel Mounting Plate With Bolts (Part No.42493)
from
$13.99
This Spectre Fuel Pump Mounting Plate for short block Chevrolet engines comes with a gasket, four bolts and four washers. It is used to mount mechanical fuel pumps. It is also triple chrome plated.
Product Features:
See More
Product Features:
- Small block Chevrolet, use for mounting mechanical fuel pumps
- Includes mounting plate gasket
- Includes chrome mounting bolts with washers
- Triple chrome plated
ARP Auto Racing – For Use With Chevy, Hex Style Head Type, Polished, Stainless Steel, With Washers (Part No.430-1602)
from
$13.99
Make sure that mechanical fuel pumps stay properly aligned by using ARP durable black oxide finished chrome moly or rust proof stainless bolts(both materials are rated at 170,000 PSI and considerably stronger than Grade 8 hardware). Your choice of either conventional hex heads or 12 point head. Washers are included.
Product Features:
See More
Product Features:
- Nominally Rated At 170,000 PSI Tensile Strength
- Properly Aligned
- Conventional Hex Heads
- Rust-Proof Stainless Bolts
- 170,000 PSI
Holley – FUEL TANKS (Part No.19-449)
from
$1430.00
FUEL TANKS
Edelbrock – EGR Valve Adapter #1476 For Intake Manifold #3701 And #3706 (Part No.1476)
ARP Auto Racing – Chrome Moly (Part No.134-8701)
from
$28.99
Stock fuel pump pushrods leave a lot to be desired. In fact, they have been known to break at the most inopportune time. To provide you with required reliability and improved performance, ARP has developed these sophisticated and durable pushrods. they are made from premium grade aerospace chrome moly and center less ground to precise diameter. A hollow core serves to reduce the reciprocating mass, which requires less energy to operate. The less drag on the motor, the more power available to you
Product Features:
See More
Product Features:
- Made From Premium Grade Aerospace Chrome Moly
- Center Less Ground To Precise Diameter
- Hollow Core Serves To Reduce The Reciprocating Mass, Which Requires Less Energy To Operate
- Provide With Required Reliability And Improved Performance
Dorman – Help – Fuel Pump Push Rod (Part No.03875)
from
$15.49
Our Fuel Pump Push Rod is constructed from high-quality materials for a long service life. Replacement helps restore the fuel pump to proper operation so that your vehicle runs smoothly.
Product Features:
See More
Product Features:
- Direct replacement – this fuel pump push rod is designed to match the fit and function of the original rod on specified vehicles
- Ideal solution – this rod is a reliable replacement for an original part that has failed
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Edelbrock – Mechanical Fuel Pump Block-Off Plates for Big-Block Chevy (Part No.4020)
from
$36.99
Edelbrock part #4020 is a mechanical fuel pump block off plate for small-block Chevy applications. It is a billet aluminum part with counter sunk bolt holes.
Product Features:
See More
Product Features:
- Black Anodized Finish
- Billet Aluminum Material
- Mounting Hardware Included
- Includes 1.5 mm Gasket
- For Small-Block Chevy
Mr. Gasket – Fuel Pump Block-Off Plate (Part No.1516)
from
$14.49
Precision cut to cover stock fuel pump opening when converting to an electric fuel pump. Gasket included.
Product Features:
See More
Product Features:
- Chrome Plated Steel
- Comes With Gasket
- Easy Installation
Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17511)
from
$19.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Passes all state and federal emissions tests
- Independently tested for emission control
- Protects your fuel from theft and vandalism
- Reduces air pollution with proper sealing and venting
- Reduces air pollution with proper sealing and venting
- Manufactured from durable, long-life materials
Carquest Premium – Locking Fuel Tank Cap (Part No.10523)
from
$23.99
Product Features:
See More
- Protects your fuel from theft and vandalism
- Passes all state and federal emissions tests
- Manufactured from durable, long-life materials
- Reduces air pollution with proper sealing and venting
- Reduces air pollution with proper sealing and venting
- Independently tested for emission control
Carquest Premium – Locking Fuel Tank Cap (Part No.10511)
from
$27.49
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Protects your fuel from theft and vandalism
- Passes all state and federal emissions tests
- Manufactured from durable, long-life materials
- Reduces air pollution with proper sealing and venting
- Independently tested for emission control
Carquest Premium – Fuel Cap: Round, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10837)
from
$14.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Passes all state and federal emissions tests
- Manufactured from durable, long-life materials
- Reduces air pollution with proper sealing and venting
- Independently tested for emission control
Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17518)
from
$18.79
Product Features:
See More
- Passes all state and federal emissions tests
- Independently tested for emission control
- Protects your fuel from theft and vandalism
- Reduces air pollution with proper sealing and venting
- Reduces air pollution with proper sealing and venting
- Manufactured from durable, long-life materials
Delphi – Fuel Tank Lock Ring (Part No.FA10009)
from
$28.99
Delphi is a Tier 1 supplier to the majority of global vehicle manufacturers and has been a manufacturer of dependable fuel pumps and fuel delivery parts for over 80 years. With over 30 OE-proprietary innovations and 150 patents in fuel technologies, Delphi is regarded as a market leader in North American fuel management with sales coverage at over 95%. Learn more about our expert-led training programs and tech hotline at 1-877-463-3574. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.
Product Features:
See More
Product Features:
- Delphi lock rings are designed to meet or exceed the performance of the original unit
- Made out of steel to endure harsh conditions
- Each lock ring is application specific to ensure the fuel system is locked in and seals properly
- Always consider replacing the lock ring as a part of fuel pump service
Carquest Premium – Fuel Tank Lock Ring LO1582927 (Part No.LO1582927)
from
$12.99
Carquest Premium offers a complete line of fuel tank lock rings covering a wide variety of North American vehicle applications. Carquest Premium fuel tank lock rings are engineered to meet or exceed all OEM specifications. Carquest Premium fuel tank lock rings are precision stamped and are treated with a rust proof finish to ensure durability and strength.
Product Features:
See More
Product Features:
- Engineered to meet or exceed all OEM specifications
- Precision stamped and are treated with a rust proof finish to ensure durability and strength
Dorman – Fuel Pump Lock Ring (Part No.579-040)
from
$5.79
This fuel tank sending unit lock ring is designed to help restore the connection between the fuel pump, module and/or sending unit and the fuel tank on specified vehicles. It is engineered to match the performance of the original equipment lock ring when the factory ring has failed or is damaged. Manufactured to precise specifications for specified vehicles, it is made with durable materials for reliable performance and long life.
Product Features:
See More
Product Features:
- Direct replacement – this fuel tank sending unit lock ring is designed to help restore the connection between the fuel pump, module and/or sending unit and the fuel tank on specified vehicles
- Ideal solution – engineered to match the performance of the original equipment lock ring when the factory ring has failed or is damaged
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Carquest – Fuel Tank Lock Ring (Part No.579-054)
from
$22.99
Recommended for replacement whenever the sending unit is serviced, this fuel tank sending unit lock ring securely retains the fuel pump assembly to the lock. Made of durable materials for reliable service.
Product Features:
See More
Product Features:
- Direct replacement – this fuel tank sending unit lock ring is made to match the fit and performance of the original ring on specific vehicle applications
- Recommended for replacement whenever the sending unit is serviced, this fuel tank sending unit lock ring securely retains the fuel pump assembly to the lock
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Upgrade your 1957 Chevrolet Corvette with Top-Quality Fuel and Emissions Systems
When it comes to maintaining or upgrading your 1957 Chevrolet Corvette, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Fuel and Emissions Systems are key to keeping your Corvette functioning at its best. At Advance Auto Parts, we offer a wide selection of 27 Fuel and Emissions Systems for the 1957 Chevrolet Corvette, designed to meet your needs without breaking the bank.
From
Fuel Pump
replacements to
Gas Caps
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Fuel and Emissions Systems for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Fuel and Emissions Systems for your 1957 Chevrolet Corvette at great prices.
Our Fuel and Emissions Systems inventory for this model
ranges from just $3.99 to $2,780.99, with
an average price of $608.33.
Our 27 Fuel and Emissions Systems in stock come from 9 trusted brands, so you’re sure to find the right part for your 1957 Chevrolet Corvette without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1957 Chevrolet Corvette, we stock popular OEM and aftermarket Fuel and Emissions Systems from top names
like Felpro, Dorman, Spectre, and more.
Felpro Fuel and Emissions Systems
start at just $3.99 and boast an impressive 4.6 stars average rating from customers.
Dorman and Spectre also bring quality to the table, with Fuel and Emissions Systems available starting at $13.99, and at an average 4.2 stars rating.
With 90 customer reviews and counting, our 1957 Chevrolet Corvette Fuel and Emissions Systems have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Fuel and Emissions System upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1957 Chevrolet Corvette is always ready to roll. We’re committed to providing you with everything you need to keep your Corvette in top shape, all in one place.
Start shopping confidently below for your 1957 Chevrolet Corvette!
Best-Selling Fuel Pumps for 1957 Chevrolet Corvettes
Enhance the driving experience in your Chevrolet with 15 quality Fuel Pump components, starting at $3.99.
Felpro – Fuel Pump Mounting Gasket (Part No.6579)
from
$3.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Includes all parts needed to complete the repair
Dorman – Help – Fuel Pump Push Rod (Part No.03875)
from
$15.49
Our Fuel Pump Push Rod is constructed from high-quality materials for a long service life. Replacement helps restore the fuel pump to proper operation so that your vehicle runs smoothly.
Product Features:
See More
Product Features:
- Direct replacement – this fuel pump push rod is designed to match the fit and function of the original rod on specified vehicles
- Ideal solution – this rod is a reliable replacement for an original part that has failed
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Spectre – Sbc Fuel Mounting Plate With Bolts (Part No.42493)
from
$13.99
This Spectre Fuel Pump Mounting Plate for short block Chevrolet engines comes with a gasket, four bolts and four washers. It is used to mount mechanical fuel pumps. It is also triple chrome plated.
Product Features:
See More
Product Features:
- Small block Chevrolet, use for mounting mechanical fuel pumps
- Includes mounting plate gasket
- Includes chrome mounting bolts with washers
- Triple chrome plated
Holley – High-Flow Mechanical Fuel Pump for Street Performance (Part No.12-834)
from
$141.99
Mechanical fuel pump made from heavy duty construction for continuous high RPM operation. Fuel body casting can be rotated to accommodate various plumbing situations. Fuel pressure regulator is not required.
Product Features:
See More
Product Features:
- Street Performance
- Flows 80 gph Free Flow
- Shutoff Pressure Pre-Set 7.5 PSI
- Fuel Pressure Regulator Is Not Required
- Heavy Duty Construction For Continuous High rpm Operation
- Fuel Body Casting Can Be Rotated For Plumbing Situations
- Inlet And Outlet Tapped For 1/4 in. NPT
- Inlet/Outlet Tapped For .25 in. NPT
Edelbrock – Performer RPM Series fuel pump for SBC and W Series Chevy (Part No.1721)
from
$177.99Product Features:
- Unique Valve Design
- Improves Flow Quantity/Quality
- Supports Engines Up To 550 HP
- Hi-Vol 0.375 in. NPT Inlet/Outlet
- Produces 6 psi
- Gasoline Or Mixed Fuels Only
ARP Auto Racing – For Use With Chevy, Hex Style Head Type, Polished, Stainless Steel, With Washers (Part No.430-1602)
from
$13.99
Make sure that mechanical fuel pumps stay properly aligned by using ARP durable black oxide finished chrome moly or rust proof stainless bolts(both materials are rated at 170,000 PSI and considerably stronger than Grade 8 hardware). Your choice of either conventional hex heads or 12 point head. Washers are included.
Product Features:
See More
Product Features:
- Nominally Rated At 170,000 PSI Tensile Strength
- Properly Aligned
- Conventional Hex Heads
- Rust-Proof Stainless Bolts
- 170,000 PSI
Holley – FUEL TANKS (Part No.19-449)
from
$1430.00
FUEL TANKS
Holley – Keith Dorton Series; VoluMax Race Series Fuel Pump (Part No.12-327-20)
from
$231.99
Keith Dorton Series VoluMax race series fuel pump made from heavy duty construction for continuous high RPM operation. Redesigned high flow valves always ensure adequate fuel delivery. Fuel pressure regulator is required. Fuel body casting can be rotated
Product Features:
See More
Product Features:
- High Output Fuel Flow
- Flows 170 gph Free Flow
- Shutoff Pressure Pre-Set At 8 PSI
- Fuel Pressure Regulator Required Recommend P/N 12-704
- Heavy Duty Construction For Continuous High rpm Operation
- Redesigned High Flow Valves Ensure Adequate Fuel Delivery
- Fuel Body Casting Can Be Rotated For Plumbing Situations
- 3/4in.-16 Inlet And Outlet Ports
Edelbrock – Victor Series fuel pump is for SBC and W Series Chevrolet (Part No.1711)
from
$183.99
High volume 0.5 inch NPT inlet and outlet. Large alcohol-proof diaphragm. Aircraft-type Allen bolts. Produces 10 psi. For gasoline only. Finest quality material. Beautifully detailed. Use with fuel pressure regulator PN(8190).
Product Features:
See More
Product Features:
- Hi-Vol 0.5 in. NPT Inlet/Outlet
- Large Alcohol-Proof Diaphragm
- Aircraft-Type Allen Bolts
- Produces 10 psi
- For Gasoline Only
- Finest Quality Material
- Beautifully Detailed
- Use w/Fuel Pressure Regulator PN[8190]
Top Street Performance – Chevy Small Block V8 (262-400) Six-Valve 130 GPH 12-16 PSI Mechanical Fuel Pump (Part No.JM1037C)
from
$99.99
TSP Mechanical Fuel Pumps are for those who want to upgrade their fuel pump without losing that classic look. Our pumps are cast from lightweight aluminum and given a beautiful, high-quality chrome finish. They?ve been designed to flow at an improved rate over stock. All of our pumps feature an adjustable rotating plate for a custom-fit to your engine bay and have been given heavy duty rubber seals for optimum leak protection.
Product Features:
See More
Product Features:
- Free Flow: 130 GPH
- Pressure: 12-16 PSI
- Housing Material: Aluminum
- Inlet and Outlet: 1/2 in NPT Female
Top Street Performance – Chevy Small Block V8 (262-400) Six-Valve 110 GPH 7.5 PSI Mechanical Fuel Pump (Part No.JM1015C)
from
$99.99
TSP Mechanical Fuel Pumps are for those who want to upgrade their fuel pump without losing that classic look. Our pumps are cast from lightweight aluminum and given a beautiful, high-quality chrome finish. They?ve been designed to flow at an improved rate over stock. All of our pumps feature an adjustable rotating plate for a custom-fit to your engine bay and have been given heavy duty rubber seals for optimum leak protection.
Product Features:
See More
Product Features:
- Free Flow: 110 GPH
- Pressure: 7.5 PSI
- Housing Material: Aluminum
- Inlet and Outlet: 3/8 in NPT Female
Top Street Performance – Chevy Small Block V8 (262-400) Two-Valve 80 GPH 8 PSI Mechanical Fuel Pump (Part No.JM1003C)
from
$53.99
TSP Mechanical Fuel Pumps are for those who want to upgrade their fuel pump without losing that classic look. Our pumps are cast from lightweight aluminum and given a beautiful, high-quality chrome finish. They?ve been designed to flow at an improved rate over stock. All of our pumps feature an adjustable rotating plate for a custom-fit to your engine bay and have been given heavy duty rubber seals for optimum leak protection.
Product Features:
See More
Product Features:
- Free Flow: 80 GPH
- Pressure: 6 PSI
- Housing Material: Aluminum
- Inlet and Outlet: 1/4 in NPT Female
Top Street Performance – Black Chevy Small Block V8 (262-400) Two-Valve 80 GPH 8 PSI Mechanical Fuel Pump (Part No.JM1003BK)
from
$53.99
TSP Mechanical Fuel Pumps are for those who want to upgrade their fuel pump without losing that classic look. Our pumps are cast from lightweight aluminum and given a beautiful, high-quality chrome finish. They?ve been designed to flow at an improved rate over stock. All of our pumps feature an adjustable rotating plate for a custom-fit to your engine bay and have been given heavy duty rubber seals for optimum leak protection.
Product Features:
See More
Product Features:
- Free Flow: 80 GPH
- Pressure: 6 PSI
- Housing Material: Aluminum
- Inlet and Outlet: 1/4 in NPT Female
Edelbrock – Mechanical Fuel Pump Block-Off Plates for Big-Block Chevy (Part No.4020)
from
$36.99
Edelbrock part #4020 is a mechanical fuel pump block off plate for small-block Chevy applications. It is a billet aluminum part with counter sunk bolt holes.
Product Features:
See More
Product Features:
- Black Anodized Finish
- Billet Aluminum Material
- Mounting Hardware Included
- Includes 1.5 mm Gasket
- For Small-Block Chevy
ARP Auto Racing – Chrome Moly (Part No.134-8701)
from
$28.99
Stock fuel pump pushrods leave a lot to be desired. In fact, they have been known to break at the most inopportune time. To provide you with required reliability and improved performance, ARP has developed these sophisticated and durable pushrods. they are made from premium grade aerospace chrome moly and center less ground to precise diameter. A hollow core serves to reduce the reciprocating mass, which requires less energy to operate. The less drag on the motor, the more power available to you
Product Features:
See More
Product Features:
- Made From Premium Grade Aerospace Chrome Moly
- Center Less Ground To Precise Diameter
- Hollow Core Serves To Reduce The Reciprocating Mass, Which Requires Less Energy To Operate
- Provide With Required Reliability And Improved Performance
Most Popular 1957 Chevrolet Corvette Gas Caps
Customize your Chevrolet with 2 Gas Caps products
like Gas Caps, all
priced under $28.99.
Carquest Premium – Non-Locking Fuel Tank Cap (Part No.10640)
from
$10.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Passes all state and federal emissions tests
- Passes all state and federal emissions tests
- Manufactured from durable, long-life materials
- Reduces air pollution with proper sealing and venting
- Independently tested for emission control
Carquest Premium – Locking Fuel Tank Cap (Part No.10491)
from
$28.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Protects your fuel from theft and vandalism
- Passes all state and federal emissions tests
- Manufactured from durable, long-life materials
- Reduces air pollution with proper sealing and venting
- Reduces air pollution with proper sealing and venting
- Independently tested for emission control
Top Picks for 1957 Chevrolet Corvette Fuel Tanks
Upgrade Chevrolet Corvettes with top-quality Fuel Tanks parts, including 3 OEM and aftermarket selections for your 1957 model.
Spectra Premium – Fuel Tank (Part No.GM45B)
from
$380.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tanks meet or exceed the performance of the original equipment they replace.
Product Features:
See More
Product Features:
- Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
- Lock ring included with each tank to reduce installation time and to ensure a complete repair
- Made with corrosion resistant, OE approved, Ni Terne steel for durability
- Unit is leak tested after production to ensure product in free from fuel and / or evaporative leaks
- Each new fuel tank is road tested to ensure real world performance and to verify that each design meets our high standards for quality
- Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
- Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
- Packaged with double-layered foam wrap and heavy-gauge corrugated board to ensure product quality at installation
Spectra Premium – Fuel Tank (Part No.GM45A)
from
$297.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tanks meet or exceed the performance of the original equipment they replace.
Product Features:
See More
Product Features:
- Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
- Lock ring included with each tank to reduce installation time and to ensure a complete repair
- Made with corrosion resistant, OE approved, Ni Terne steel for durability
- Unit is leak tested after production to ensure product in free from fuel and / or evaporative leaks
- Each new fuel tank is road tested to ensure real world performance and to verify that each design meets our high standards for quality
- Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
- Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
- Packaged with double-layered foam wrap and heavy-gauge corrugated board to ensure product quality at installation
Dorman – Fuel Pump Lock Ring (Part No.579-040)
from
$5.79
This fuel tank sending unit lock ring is designed to help restore the connection between the fuel pump, module and/or sending unit and the fuel tank on specified vehicles. It is engineered to match the performance of the original equipment lock ring when the factory ring has failed or is damaged. Manufactured to precise specifications for specified vehicles, it is made with durable materials for reliable performance and long life.
Product Features:
See More
Product Features:
- Direct replacement – this fuel tank sending unit lock ring is designed to help restore the connection between the fuel pump, module and/or sending unit and the fuel tank on specified vehicles
- Ideal solution – engineered to match the performance of the original equipment lock ring when the factory ring has failed or is damaged
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
In-Demand Fuel Injectors for 1957 Chevrolet Corvettes
Select from 5 premium Fuel Injectors parts for your 1957 Chevrolet Corvette, with prices ranging from $2,375.99 to $2,780.99.
Edelbrock – Pro-Flo 4 EFI XT-Style Kit No. 35810 For 1986 & Earlier Chevy Small-Block (Part No.35810)
from
$2780.99
The Edelbrock Pro-Flo 4 XT EFI Kit No. 35810 for 1986 & Earlier Small-Block Chevy engines has the latest technology and features. The EFI system comes complete with a satin finish Pro-Flo XT intake manifold and 35 Lb./Hr injectors capable of 550 HP with 58 p.s.i. fuel pressure. Also included is a plug and play single connection distributor designed to work specifically with Pro-Flo 4 and a made in the USA high-quality harness with clearly labeled connections for a hassle-free installation. The new Pro-Flo 4 EFI systems feature an all-new ECU with a faster processor, a water proof design and is half the depth of the previous ECU. It also has an upgraded Bluetooth chip that is faster, more reliable and will not drop connection. We’ve added more features for the advanced tuner giving you control over air-fuel ratios, ignition curve, idle speed, acceleration fuel, coolant fans, Rev limiter while retaining the simplicity Pro-Flo is known for. The key to the system is our exclusive E-Tuner 4 app with dyno developed base calibrations. The E-Tuner 4 app uses a Bluetooth wireless connection to communicate with the ECU’s self-learning capability to continually adjust the calibration to get the maximize performance. E-Tuner 4 features a simple and easy to use setup wizard to help you get started as well as multiple dash displays so you can monitor your engines vitals. The exclusive Edelbrock E-Tuner 4 app is Free and Available for Android and IOS based smart phone or tablet.
See More
Edelbrock – Pro-Flo 4 EFI XT-Style Kit No. 35790 For 1986 & Earlier Chevy Small-Block (Part No.35790)
from
$2754.99
The Edelbrock Pro-Flo 4 XT EFI Kit No. 35790 for 1986 & Earlier Small-Block Chevy engines has the latest technology and features. The EFI system comes complete with a Pro-Flo XT intake manifold and 29 Lb./Hr injectors capable of 450 HP with 58 p.s.i. fuel pressure. Also included is a plug and play single connection distributor designed to work specifically with Pro-Flo 4 and a made in the USA fully terminated high-quality harness with clearly labeled connections for a hassle-free installation. The new Pro-Flo 4 EFI systems feature an all-new ECU with a faster processor, water proof design and is half the depth of the previous ECU. It also has an upgraded Bluetooth chip that is faster, more reliable and will not drop connection. We’ve added more features for the advanced tuner giving you control over air-fuel ratios, ignition curve, idle speed, acceleration fuel, coolant fans, Rev limiter while retaining the simplicity Pro-Flo is known for. The key to the system is our exclusive E-Tuner 4 app with dyno developed base calibrations. The E-Tuner 4 app uses a Bluetooth wireless connection to communicate with the ECU’s self-learning capability to continually adjust the calibration to get the maximize performance. E-Tuner 4 features a simple and easy to use setup wizard to help you get started as well as multiple dash displays so you can monitor your engines vitals. The exclusive Edelbrock E-Tuner 4 app is Free and Available for Android and IOS based smart phone or tablet.
See More
Edelbrock – Pro-Flo 4 EFI System for 1986 & Earlier Small-Block Chevy Engines (Part No.35690)
from
$2483.99
The Edelbrock Pro-Flo 4 EFI Kit No. 35690 for 1986-earlier small-block Chevy engines is a fully sequential multi-port injection system designed with a fuel injector positioned in each runner of the intake manifold to deliver the best fuel atomization and most even distribution to each cylinder. This system features the high-performance Super Victor single-plane intake manifold that comes preassembled with high-flow injectors, fuel rails and 4150-flange throttle body. All supporting sensors are included along with wire harnesses and ECU. The Super Victor SBC manifold is designed with a larger cross-sectional area in the plenum and large runners for high-horsepower and/or large cubic-inch applications. This kit uses 42 lb/hr injectors and is rated for 675 horsepower at 58 PSI of fuel pressure.The exclusive Edelbrock E-Tuner 4 app is Free and Available for Android and IOS based smart phone or tablet.
See More
Edelbrock – Pro-Flo 4 EFI System for 1986 & Earlier Small-Block Chevy Engines (Part No.35770)
from
$2404.99
The Edelbrock Pro-Flo 4 EFI Kit No. 35770 for 1986 & Earlier Small-Block Chevy engines is equipped with the latest technology and features. The EFI system comes complete with a traditional 4150-Style satin finish single plane intake manifold and 35 Lb/Hr injectors capable of 550 HP with 58 p.s.i. fuel pressure. Also included is a plug and play single connection distributor designed to work specifically with Pro-Flo 4 and a made in the USA high-quality harness with clearly labeled connections to ensure a hassle-free installation. The new Pro-Flo 4 EFI systems feature an all-new ECU with a faster processor, a water proof design and measures half the depth of the previous ECU. It also has an upgraded Bluetooth chip that is faster, more reliable and will not drop connection. We’ve added more features for the advanced tuner giving you control over air-fuel ratios, ignition curve, idle speed, acceleration fuel, coolant fans, Rev limiter while retaining the simplicity Pro-Flo is known for. The key to the system is our exclusive E-Tuner 4 app with dyno developed base calibrations. The E-Tuner 4 app uses a Bluetooth wireless connection to communicate with the ECU’s self-learning capability to continually adjust the calibration to get the maximize performance. E-Tuner 4 features a simple and easy to use setup wizard to help you get started as well as multiple dash displays so you can monitor your engines vitals.The exclusive Edelbrock E-Tuner 4 app is Free and Available for Android and IOS based smart phone or tablet.
See More
Edelbrock – Pro Flo 4 Fuel Injection Kit Sequential Port Sbc 1986 & Earlier 450 Hp 29 Lbhr Injectors (Part No.35760)
from
$2375.99
The Edelbrock Pro-Flo 4 EFI Kit No. 35760 for 1986 & Earlier Small-Block Chevy engines is equipped with the latest technology and features. The EFI system comes complete with a traditional 4150-Style satin finish single plane intake manifold and 29 Lb/Hr injectors capable of 450 HP with 58 p.s.i. fuel pressure. Also included is a plug and play single connection distributor designed to work specifically with Pro-Flo 4 and a made in the USA high-quality harness with clearly labeled connections to ensure a hassle-free installation. The new Pro-Flo 4 EFI systems feature an all-new ECU with a faster processor, a water proof design and measures half the depth of the previous ECU. It also has an upgraded Bluetooth chip that is faster, more reliable and will not drop connection. We’ve added more features for the advanced tuner giving you control over air-fuel ratios, ignition curve, idle speed, acceleration fuel, coolant fans, Rev limiter while retaining the simplicity Pro-Flo is known for. The key to the system is our exclusive E-Tuner 4 app with dyno developed base calibrations. The E-Tuner 4 app uses a Bluetooth wireless connection to communicate with the ECU’s self-learning capability to continually adjust the calibration to get the maximize performance. E-Tuner 4 features a simple and easy to use setup wizard to help you get started as well as multiple dash displays so you can monitor your engines vitals. The exclusive Edelbrock E-Tuner 4 app is Free and Available for Android and IOS based smart phone or tablet.
See More
Most Sold 1957 Chevrolet Corvette Exhaust Gas Recirculation (EGR) Parts
Explore our best-selling Chevrolet parts for the 1957 Corvette among 1 OEM and aftermarket options starting from $88.99.
Edelbrock – EGR Valve Adapter #1476 For Intake Manifold #3701 And #3706 (Part No.1476)
Top-Rated Fuel and Emissions Systems Brands For Your 1957 Chevrolet Corvette
Shop for the best-rated brands offering Fuel and Emissions Systems and other products for your 1957 Chevrolet Corvettes. Below you’ll find some of our best rated Fuel and Emissions Systems from Felpro, Dorman, and Spectre, and more. Fuel and Emissions Systems from these brands that fit a 1957 Corvette start at just $3.99 and are rated as high as 4.6 stars. OEM and aftermarket Fuel and Emissions Systems don’t get more top quality, durable, and affordable than from the brands below.
Popular Felpro 1957 Chevrolet Corvette Fuel and Emissions Systems
When it comes to maintaining or upgrading your 1957 Chevrolet Corvette, using quality Fuel and Emissions Systems is essential to ensure durability and a perfect fit. Felpro ticks all of those boxes. We offer a wide selection of Felpro Fuel and Emissions Systems, specifically designed for the 1957 Chevrolet Corvette. With over 1 Felpro brand Fuel and Emissions Systems in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $3.99. Plus, with over 26 customer reviews and an average rating of 4.6 stars, you can trust that our Felpro Fuel and Emissions Systems will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
Popular Dorman 1957 Chevrolet Corvette Fuel and Emissions Systems
Dorman auto parts is one of the highest quality Fuel and Emissions System brands in the market. Any 1957 Chevrolet Corvette owner should feel confident when installing genuine Dorman parts in their vehicle. To ensure the best fit and performance for your 1957 Corvette, Advance Auto Parts carries a full inventory of 1 Dorman Fuel and Emissions Systems. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these Dorman Fuel and Emissions Systems range up to $15.49, plus, with more than 1 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Fuel and Emissions Systems below will deliver on both quality and value.
FAQs for 1957 Chevrolet Corvette Fuel and Emissions Systems
Which Fuel and Emissions Systems are best-sellers for 1957 Chevrolet Corvettes?
Out of 27 Fuel and Emissions Systems that fit 1957 Chevrolet Corvettes, the following parts are the top sellers:
- High-Flow Mechanical Fuel Pump for Street Performance (17120636) – $141.99
- Non-Locking Fuel Tank Cap (18481485) – $10.99
- Locking Fuel Tank Cap (18481448) – $28.99
What’s the price range for 1957 Chevrolet Corvette Fuel and Emissions Systems?
Fuel and Emissions System prices for the 1957 Chevrolet Corvette start at $3.99 and go up to $2,780.99 for the most premium parts.
What’s the average price of a Fuel and Emissions System for a 1957 Chevrolet Corvette?
The average price for Fuel and Emissions Systems for the 1957 Chevrolet Corvette is $608.33. Keep in mind the variety of part types within our Fuel and Emissions System category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Fuel and Emissions Systems for other Chevrolet Corvette model years?
What are the cheapest Fuel and Emissions Systems for my 1957 Chevrolet Corvette?
The cheapest 1957 Chevrolet Corvette Fuel and Emissions Systems we carry in stock are:
- Fuel Pump Mounting Gasket (5183804) – $3.99
- Fuel Pump Lock Ring (10904575) – $5.79
- Non-Locking Fuel Tank Cap (18481485) – $10.99
- Sbc Fuel Mounting Plate With Bolts (22905345) – $13.99
- For Use With Chevy, Hex Style Head Type, Polished, Stainless Steel, With Washers (11530006) – $13.99
What are the top-rated Fuel and Emissions Systems that fit the 1957 Chevrolet Corvette?
Out of 90 reviews by customers, our 1957 Chevrolet Corvette Fuel and Emissions Systems have an average customer rating of . These are some of the highest-rated Fuel and Emissions System types for the 1957 Chevrolet Corvette and their top-rated products:
- Gas Caps
- Non-Locking Fuel Tank Cap (18481485) – $10.99
What types of Fuel and Emissions Systems do you sell for my 1957 Chevrolet Corvette?
As of 3/1/26, these are some of the most in-demand types of Fuel and Emissions Systems for a 1957 Chevrolet Corvette:
Can I get help with 1957 Chevrolet Corvette Fuel and Emissions System orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Fuel and Emissions Systems and more.
What is your return policy for Chevrolet Corvette Fuel and Emissions Systems?
Advance Auto Parts keeps returns simple. For new Chevrolet Corvette Fuel and Emissions Systems and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
