1957 Chevrolet Corvette Drivetrains
More 1957 Chevrolet Corvette Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1957 Chevrolet Corvette, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1957 Chevrolet Corvette Drivetrains
National – Bearings (Part No.LM603014)
from
$20.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – 57-62 Corvette Axle Kit, Left Hand & Right Hand, 17Spline (Part No.21638)
from
$677.99
57-62 Corvette axle kit, left hand & Right hand, 17spline.
Product Features:
See More
Product Features:
- 17 spline
- Fits 1957-1962 Corvette
- Includes two axles
Yukon Gear – Standard Open Cross Pin Shaft For GM 8.2" And 55P (Part No.33407)
from
$88.99
Standard Open cross pin shaft for GM 8.2″ and 55P.
Product Features:
See More
Product Features:
- Cross pin shaft
- Fits GM 8.2″ and 1955-1964 passenger car
ARP Auto Racing – For Use With General Motors, 0.800" Head L, 3/8" – 24 Thread Size, Chrome Moly (Part No.230-3001)
from
$40.49
The tremendous shock loads generated at launch by most any drag racing vehicle equipped with todays sticky tire compounds or the acceleration and deceleration of oval track cars put considerable strain on the ring gear. For this reason, the fastener experts at ARP have developed the Pro Series ring gear bolts. They are forged from premium grade 8740 chrome moly steel and are heat treated to a nominal rating of 200,000 PSI tensile strength. Specially hardened, precision ground washers are included where required. Available to fit most any ring gear setup ranging from popular 9 Inch Ford GM 10 and 12 bolt rear ends to the beefy strange differentials found in top fuel and funny car applications.
Product Features:
See More
Product Features:
- Forged From Premium Grade 8740 Chrome Moly Steel
- Heat Treated
- Nominally Rated At 200,000 Psi Tensile Strength
- Specially Hardened, Precision Ground Washers
- 3/8″-24 RH Thread Size
- 0.8″ Underhead Length
- 200,000 PSI
USA Standard Gear – Bearing Kit For ’55-’64 GM Car & Truck (Part No.58048)
from
$208.99
This kit uses Koyo bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush. USA Standard Gear does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set.
Product Features:
See More
Product Features:
- Fits 1955-1964 GM passenger car and truck
- Uses Koyo bearings and races
- Included are carrier bearings and races, pinion bearings and races, pinion seal, pinion nut, crush sleeve, marking compound and brush.
Motive Gear – Differential Pinion Shim Kit (Part No.1114)
Yukon Gear – Replacement Carrier Shim Kit For Dana 44HD (Part No.55016)
National – Shaft Repair Sleeve (Part No.99139)
from
$39.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Valvoline – VAL EP ATF 6/1 QT (Part No.899179)
from
$14.99
VAL EP ATF 6/1 QT
National – Shaft Repair Sleeve (Part No.99170)
from
$41.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Yukon Gear – Pinion Seal For ’55-’64 Chevy 55P (Part No.30133)
from
$19.99
Pinion seal for ’55-’64 Chevy 55P.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Pinion seal
- Fits 1955-1964 GM passenger car and truck
National – Shaft Repair Sleeve (Part No.99187)
from
$41.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Yukon Gear – 3/8" Ring Gear Bolt Washer For GM 12 Bolt Car & Truck, 8.2 Bop & More (Part No.33347)
from
$4.99
3/8″ ring gear bolt washer for GM 12 bolt car & truck, 8.2 BOP & more.
Product Features:
See More
Product Features:
- Ring gear bolt washer for GM 12 bolt car and truck, 1955-1964 passenger car, 1963-1979 Corvette and 8.2″ Buick, Oldsmobile and Pontiac
Motive Gear – Differential Gear Install Kit (Part No.D44IK)
Yukon Gear – Yoke For GM 55P And 55T With A 1310 U/Joint Size (Part No.41089)
from
$312.99
Yukon yoke for GM 55P and 55T with a 1310 U/joint size. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring. This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits 1955-1964 GM passenger car and truck
- 17 spline
- 1310 u-joint size
- Outside snap ring design
- 3.219″ snap ring span
- 1.062″ cap diameter
- Strap style
Yukon Gear – 1310 Lifetime U/Joint (Part No.42003)
from
$57.99
1310 Yukon Lifetime U/joint. 1.718″ snap ring span, 1.062″ cap diameter. Inside snap ring.
See More
National – Bearings (Part No.HM88510)
from
$14.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Dana 30 & Dana 44 Power Lok Bolt, Left Hand, & 8.75" Chrysler & 55P (Part No.33234)
from
$21.99
Dana 30 & Dana 44 Power Lok bolt, left hand, & 8.75″ Chrysler & 55P.
Product Features:
See More
Product Features:
- Power Lok case bolt for Dana Spicer 30, Dana Spicer 44, Chrysler 8.75″ and 1955-1964 GM passenger car
- Left hand thread
Yukon Gear – Replacement Side Yoke Seal For 80-87 Dana 44-HD Ica Vett (Part No.30275)
from
$16.99
Replacement side yoke seal for 80-87 Dana 44-HD ICA VETT (2.26″ OD).Yukon Mighty seal.
Product Features:
See More
Product Features:
- Stub axle seal
- Fits 1980-1987 Corvette
- 2.26″ O.D.
Yukon Gear – Dana 44-HD (HD Design Only ) Tracloc Clutch Set (Part No.16150)
from
$159.99
Dana 44-HD (HD design ONLY ) TracLoc clutch set.
Product Features:
See More
Product Features:
- Clutch kit
- Fits Dana Spicer 44HD Trac Loc positraction
Yukon Gear – Replacement Shim Kit For Dana 30, Front & Rear, Also D36Ica & Dana 44Ica (Part No.55023)
from
$78.99
Replacement shim kit for Dana 30, front & rear, also D36ICA & Dana 44ICA.
Product Features:
See More
Product Features:
- Complete shim kit for Dana Spicer 30 front and rear, also Dana Spicer 36
Yukon Gear – Dana 44 Pinion Gear Thrust Washer (Part No.33281)
from
$4.99
Dana 44, GM55P & 8.2″ GM pinion gear Thrust washer.
Product Features:
See More
Product Features:
- Pinion gear thrust washer for Dana Spicer 44, GM 8.2″ and 1955-1964 GM passenger car
Yukon Gear – Pinion Install Kit For Dana 44 -HD Ica Differential For Corvette Or Viper (Part No.13029)
from
$217.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.
Product Features:
See More
Product Features:
- Fits Dana Spicer 44HD in Corvette and Viper
- Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.
Yukon Gear – Side Gear Thrust Washer For GM 8.2" & 55P (Part No.33529)
from
$10.99
Product Features:
See More
- Side gear thrust washer for GM 8.2″ and 1955-1964 GM passenger car
- Fits standard open differentials only
National – Bearings (Part No.NP908986)
from
$62.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Powertrax – Lock Right Locker (Part No.1940-LR)
from
$441.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles. Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction. Powertrax® = Extreme Traction Systems!
See More
Yukon Gear – Bearing Race Driver (Part No.56014)
from
$188.99
Bearing race driver. No return.
Product Features:
See More
Product Features:
- Bearing race driver
- Fits HM88510 race
- All steel construction
Yukon Gear – Standard Open Spider Gear Kit For ’55 To ’64 GM Chevy 55P With 17 Spline Axles (Part No.16046)
from
$269.99
Yukon standard open spider gear kit for ’55 to ’64 GM Chevy 55P with 17 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Spider gear kit
- Fits 1955-1964 GM passenger car open differential
- Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
Popular 1957 Chevrolet Corvette Drivetrains Categories
1957 Chevrolet Corvette Drivetrains
You count on your 1957 Chevrolet Corvette to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 78 Drivetrains ranging in price from $1.49 to $883.99, you’re sure to find everything you need for your 1957 Chevrolet Corvette.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 15 different brands like Moog, DriveWorks, and Spicer. 1957 Chevrolet Corvette Drivetrains start as low as $1.49!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 410 extensive product reviews on 1957 Chevrolet Corvette Drivetrains. Some of the top-rated Drivetrains products we carry are Universal Joint U-Bolt Kit with 5.0 stars and Shaft Repair Sleeve with 5.0 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1957 Chevrolet Corvette below to get started!
Top-Rated Drivetrains Brands For Your 1957 Chevrolet Corvette
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1957 Chevrolet Corvette running right for years to come. In our inventory you’ll find brands like Moog, DriveWorks, Spicer, and even more.
Popular Felpro Drivetrains
You’ll find popular Felpro brand products across Differentials. All are waiting to get your 1957 Chevrolet Corvette back on the road. Some of the top-rated Felpro products in these categories are:
Top-Rated MOOG Driveline Products Drivetrains
If MOOG Driveline Products are what you’re looking for, our inventory holds plenty. We stock MOOG Driveline Products brand Drivetrains for your 1957 Chevrolet Corvette, and some of our most reviewed MOOG Driveline Products parts include:
FAQs for 1957 Chevrolet Corvette Drivetrains
What are the most purchased Drivetrains for the 1957 Chevrolet Corvette?
Out of 78 Drivetrains for the 1957 Chevrolet Corvette, the most popular in our inventory are:
What are the top-rated 1957 Chevrolet Corvette Drivetrains?
Top-rated Drivetrains for your 1957 Chevrolet Corvette based on customer reviews/ratings are:
from
$9.99
(4)
Universal Joint U-Bolt Kit
“I used these to replace the factory originals that had over 80K miles on a 1964 Chevelle Malibu. I had a strange click in the differential area and s”
from
$41.99
(1)
Shaft Repair Sleeve
“Fixed my Ford F-150 4.2. Fit well and installation tool seated the sleeve exactly where it needed to be. Super easy to use and covered the grooved s”
from
$160.99
(1)
Differential Bearing Kit – Timken
“great quality, price and delivery. couldn’t ask for more.”
