1956 Studebaker E12 Belts and Hoses

Find Your Specific 1956 Studebaker E12 Belts and Hoses

Below you will find various in-demand Studebaker Belts and Hoses, components and accessories for your 1956 E12. Advance Auto Parts has popular E12 parts like Serpentine and V Belts Radiator Hoses and more. You’ll also find aftermarket and OEM Belts and Hoses for other E12 model years including 1955 and more. Select a category of 1956 Studebaker E12 Belts and Hoses below and start saving instantly.
Please Select your Vehicle to See Exact Fit Parts

Essential Belts and Hoses for 1956 Studebaker E12s

Gates – Automotive XL High Capacity V-Belt (Part No.7590)

Automotive XL High Capacity V-Belt

from

$19.99
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:
  • The fiber-reinforced rubber support adds flexibility along the belt and provides greater lateral stability on the pulley.
  • Ground to ensure precise dimensional control of the top width and side wall for proper fit to the pulley.
  • Thermoactive traction ropes for maintenance-free performance when properly installed and tensioned
  • Resistant to oil, heat, ozone, weathering and aging for a longer belt life.
  • Meets or exceeds SAE J636C specifications
See More
View Product

Gates – Premium Molded Coolant Hose (Part No.21256)

Premium Molded Coolant Hose

from

$46.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Designed to resist electrochemical degradation, the main cause of casing failure
  • Pre-shaped to fit and ensure a perfect seal
  • EPDM tube; reinforced with knitted synthetic fibers; EPDM lid resistant to heat, ozone, and chemical refrigerants
  • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Warning: Do not use for fuel or oil transfer applications
See More
View Product

Gates – Green Stripe Heavy-Duty Vulco-Flex Coolant Hose (Part No.26504)

Green Stripe Heavy-Duty Vulco-Flex Coolant Hose

from

$34.49
Heavy-duty flexible hose designed to replace straight or curved coolant hoses. The benefit is maximum coverage with minimum inventory. Hose inside diameter remains constant from end to end. No convolutions inside hose so tube is smooth, allowing free coolant flow. Approved for marine applications.

Product Features:
  • Designed to resist electrochemical degradation, the main cause of pipe failure
  • The steel wire spiral allows them to adopt multiple shapes without bending or crushing
  • EPDM tube and neoprene lid for extended lifespan
  • The polyester fabric reinforcement takes the form of vulcanization without unnecessary stress on the connections.
  • Resistant to heat, oil and ozone
  • Meets SAE 20R5 Type EC Class D-2 specifications
  • Temperature range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Caution: Do not use for fuel or oil transport applications.
  • Caution: Do not use for fuel or oil transfer applications.
See More
View Product

Upgrade your 1956 Studebaker E12 with Top-Quality Belts and Hoses

When it comes to maintaining or upgrading your 1956 Studebaker E12, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Studebaker or enhancing its overall performance, Belts and Hoses are key to keeping your E12 functioning at its best. At Advance Auto Parts, we offer a wide selection of 3 Belts and Hoses for the 1956 Studebaker E12, designed to meet your needs without breaking the bank. From Serpentine and V Belt replacements to Radiator Hoses upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 1956 Studebaker E12 at great prices. Our Belts and Hoses inventory for this model ranges from just $19.99 to $46.99, with an average price of $33.82. Our 3 Belts and Hoses in stock come from trusted brands, so you’re sure to find the right part for your 1956 Studebaker E12 without overspending.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Fluids and Chemicals, Alternators and Starters and more to make sure your 1956 Studebaker E12 is always ready to roll. We’re committed to providing you with everything you need to keep your E12 in top shape, all in one place. Start shopping confidently below for your 1956 Studebaker E12!

Best-Selling Serpentine and V Belts for 1956 Studebaker E12s

Enhance the driving experience in your Studebaker with 1 quality Serpentine and V Belt components, starting at $19.99.
show more show less

Gates – Automotive XL High Capacity V-Belt (Part No.7590)

Automotive XL High Capacity V-Belt

from

$19.99
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:
  • The fiber-reinforced rubber support adds flexibility along the belt and provides greater lateral stability on the pulley.
  • Ground to ensure precise dimensional control of the top width and side wall for proper fit to the pulley.
  • Thermoactive traction ropes for maintenance-free performance when properly installed and tensioned
  • Resistant to oil, heat, ozone, weathering and aging for a longer belt life.
  • Meets or exceeds SAE J636C specifications
See More
View Product

Most Popular 1956 Studebaker E12 Radiator Hoses

Customize your Studebaker with 2 Radiator Hoses products like Coolant Hoses, all priced under $46.99.
show more show less

Gates – Premium Molded Coolant Hose (Part No.21256)

Premium Molded Coolant Hose

from

$46.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Designed to resist electrochemical degradation, the main cause of casing failure
  • Pre-shaped to fit and ensure a perfect seal
  • EPDM tube; reinforced with knitted synthetic fibers; EPDM lid resistant to heat, ozone, and chemical refrigerants
  • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Warning: Do not use for fuel or oil transfer applications
See More
View Product

Gates – Green Stripe Heavy-Duty Vulco-Flex Coolant Hose (Part No.26504)

Green Stripe Heavy-Duty Vulco-Flex Coolant Hose

from

$34.49
Heavy-duty flexible hose designed to replace straight or curved coolant hoses. The benefit is maximum coverage with minimum inventory. Hose inside diameter remains constant from end to end. No convolutions inside hose so tube is smooth, allowing free coolant flow. Approved for marine applications.

Product Features:
  • Designed to resist electrochemical degradation, the main cause of pipe failure
  • The steel wire spiral allows them to adopt multiple shapes without bending or crushing
  • EPDM tube and neoprene lid for extended lifespan
  • The polyester fabric reinforcement takes the form of vulcanization without unnecessary stress on the connections.
  • Resistant to heat, oil and ozone
  • Meets SAE 20R5 Type EC Class D-2 specifications
  • Temperature range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Caution: Do not use for fuel or oil transport applications.
  • Caution: Do not use for fuel or oil transfer applications.
See More
View Product

FAQs for 1956 Studebaker E12 Belts and Hoses

Which Belts and Hoses are best-sellers for 1956 Studebaker E12s?

Out of 3 Belts and Hoses that fit 1956 Studebaker E12s, the following parts are the top sellers:

What’s the price range for 1956 Studebaker E12 Belts and Hoses?

Belts and Hose prices for the 1956 Studebaker E12 start at $19.99 and go up to $46.99 for the most premium parts.

What’s the average price of a Belts and Hose for a 1956 Studebaker E12?

The average price for Belts and Hoses for the 1956 Studebaker E12 is $33.82. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.

What are the cheapest Belts and Hoses for my 1956 Studebaker E12?

The cheapest 1956 Studebaker E12 Belts and Hoses we carry in stock are:

What types of Belts and Hoses do you sell for my 1956 Studebaker E12?

As of 3/1/26, these are some of the most in-demand types of Belts and Hoses for a 1956 Studebaker E12:

Can I get help with 1956 Studebaker E12 Belts and Hose orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Studebaker Belts and Hoses and more.

What is your return policy for Studebaker E12 Belts and Hoses?

Advance Auto Parts keeps returns simple. For new Studebaker E12 Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.