1955 Studebaker E12 Belts and Hoses
Find Your Specific 1955 Studebaker E12 Belts and Hoses
Below you will find various in-demand Studebaker Belts and Hoses, components and accessories for your 1955 E12. Advance Auto Parts has popular E12 parts like Engine Cooling Hoses Radiator Hoses and more. You’ll also find aftermarket and OEM Belts and Hoses for other E12 model years including
1956 and more. Select a category of 1955 Studebaker E12 Belts and Hoses below and start saving instantly.
Popular 1955 Studebaker E12 Belts and Hoses Categories
Essential Belts and Hoses for 1955 Studebaker E12s
Gates – Vulco-Flex II Flexible Coolant Hose (Part No.25251)
from
$30.99
Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.
Product Features:
See More
Product Features:
- Improved sealing surface for greater leak resistance
- High flexibility for easy installation
- Maximum vehicle coverage with minimal inventory
- Resistant to heat, oil and ozone
- Rated for SAE 20R5 Class D-2 performance
- Temperature range: up to +257 Degrees F (+125 Degrees C)
- Note: Gates recommends replacing clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transport applications.
Gates – Premium Molded Coolant Hose (Part No.21256)
from
$46.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
Product Features:
See More
Product Features:
- Specifically-engineered materials resist collapse under vacuum
- Designed to resist electrochemical degradation, the main cause of casing failure
- Pre-shaped to fit and ensure a perfect seal
- EPDM tube; reinforced with knitted synthetic fibers; EPDM lid resistant to heat, ozone, and chemical refrigerants
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Warning: Do not use for fuel or oil transfer applications
Gates – Green Stripe Heavy-Duty Vulco-Flex Coolant Hose (Part No.26504)
from
$34.49
Heavy-duty flexible hose designed to replace straight or curved coolant hoses. The benefit is maximum coverage with minimum inventory. Hose inside diameter remains constant from end to end. No convolutions inside hose so tube is smooth, allowing free coolant flow. Approved for marine applications.
Product Features:
See More
Product Features:
- Designed to resist electrochemical degradation, the main cause of pipe failure
- The steel wire spiral allows them to adopt multiple shapes without bending or crushing
- EPDM tube and neoprene lid for extended lifespan
- The polyester fabric reinforcement takes the form of vulcanization without unnecessary stress on the connections.
- Resistant to heat, oil and ozone
- Meets SAE 20R5 Type EC Class D-2 specifications
- Temperature range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transport applications.
- Caution: Do not use for fuel or oil transfer applications.
Upgrade your 1955 Studebaker E12 with Top-Quality Belts and Hoses
When it comes to maintaining or upgrading your 1955 Studebaker E12, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Studebaker or enhancing its overall performance, Belts and Hoses are key to keeping your E12 functioning at its best. At Advance Auto Parts, we offer a wide selection of 3 Belts and Hoses for the 1955 Studebaker E12, designed to meet your needs without breaking the bank.
From
Engine Cooling Hose
replacements to
Radiator Hoses
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 1955 Studebaker E12 at great prices.
Our Belts and Hoses inventory for this model
ranges from just $30.99 to $46.99, with
an average price of $37.49.
Our 3 Belts and Hoses in stock come from trusted brands, so you’re sure to find the right part for your 1955 Studebaker E12 without overspending.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals
and more to make sure your 1955 Studebaker E12 is always ready to roll. We’re committed to providing you with everything you need to keep your E12 in top shape, all in one place.
Start shopping confidently below for your 1955 Studebaker E12!
Best-Selling Engine Cooling Hoses for 1955 Studebaker E12s
Enhance the driving experience in your Studebaker with 1 quality Engine Cooling Hose components, starting at $30.99.
Gates – Vulco-Flex II Flexible Coolant Hose (Part No.25251)
from
$30.99
Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.
Product Features:
See More
Product Features:
- Improved sealing surface for greater leak resistance
- High flexibility for easy installation
- Maximum vehicle coverage with minimal inventory
- Resistant to heat, oil and ozone
- Rated for SAE 20R5 Class D-2 performance
- Temperature range: up to +257 Degrees F (+125 Degrees C)
- Note: Gates recommends replacing clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transport applications.
Most Popular 1955 Studebaker E12 Radiator Hoses
Customize your Studebaker with 2 Radiator Hoses products
like Coolant Hoses, all
priced under $46.99.
Gates – Premium Molded Coolant Hose (Part No.21256)
from
$46.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
Product Features:
See More
Product Features:
- Specifically-engineered materials resist collapse under vacuum
- Designed to resist electrochemical degradation, the main cause of casing failure
- Pre-shaped to fit and ensure a perfect seal
- EPDM tube; reinforced with knitted synthetic fibers; EPDM lid resistant to heat, ozone, and chemical refrigerants
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Warning: Do not use for fuel or oil transfer applications
Gates – Green Stripe Heavy-Duty Vulco-Flex Coolant Hose (Part No.26504)
from
$34.49
Heavy-duty flexible hose designed to replace straight or curved coolant hoses. The benefit is maximum coverage with minimum inventory. Hose inside diameter remains constant from end to end. No convolutions inside hose so tube is smooth, allowing free coolant flow. Approved for marine applications.
Product Features:
See More
Product Features:
- Designed to resist electrochemical degradation, the main cause of pipe failure
- The steel wire spiral allows them to adopt multiple shapes without bending or crushing
- EPDM tube and neoprene lid for extended lifespan
- The polyester fabric reinforcement takes the form of vulcanization without unnecessary stress on the connections.
- Resistant to heat, oil and ozone
- Meets SAE 20R5 Type EC Class D-2 specifications
- Temperature range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transport applications.
- Caution: Do not use for fuel or oil transfer applications.
FAQs for 1955 Studebaker E12 Belts and Hoses
Which Belts and Hoses are best-sellers for 1955 Studebaker E12s?
Out of 3 Belts and Hoses that fit 1955 Studebaker E12s, the following parts are the top sellers:
- Vulco-Flex II Flexible Coolant Hose (10505046) – $30.99
- Green Stripe Heavy-Duty Vulco-Flex Coolant Hose (10504944) – $34.49
- Premium Molded Coolant Hose (10512349) – $46.99
What’s the price range for 1955 Studebaker E12 Belts and Hoses?
Belts and Hose prices for the 1955 Studebaker E12 start at $30.99 and go up to $46.99 for the most premium parts.
What’s the average price of a Belts and Hose for a 1955 Studebaker E12?
The average price for Belts and Hoses for the 1955 Studebaker E12 is $37.49. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.
What are the cheapest Belts and Hoses for my 1955 Studebaker E12?
The cheapest 1955 Studebaker E12 Belts and Hoses we carry in stock are:
- Vulco-Flex II Flexible Coolant Hose (10505046) – $30.99
- Green Stripe Heavy-Duty Vulco-Flex Coolant Hose (10504944) – $34.49
- Premium Molded Coolant Hose (10512349) – $46.99
What types of Belts and Hoses do you sell for my 1955 Studebaker E12?
As of 3/1/26, these are some of the most in-demand types of Belts and Hoses for a 1955 Studebaker E12:
Can I get help with 1955 Studebaker E12 Belts and Hose orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Studebaker Belts and Hoses and more.
What is your return policy for Studebaker E12 Belts and Hoses?
Advance Auto Parts keeps returns simple. For new Studebaker E12 Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
