1956 Ford F-250 Distributors
More 1956 Ford F-250 Distributors
Find your specific 1956 Ford F-250 original or aftermarket Distributors below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1956 Ford F-250 Distributors
Carquest – Distributor Cap (Part No.C194)
from
$19.05
BWD SELECT replacement parts are designed, specified and manufactured with one goal in mind – to make them the very best. We use the finest materials and improve on OE specifications whenever possible. The result is maximum performance and longevity.
Product Features:
See More
Product Features:
- Each anti-lock speed sensor uses OE connectors and terminals ensuring an accurate water-tight connection to the engine wire harness
- Grommets and wire clips are included on the harness ensuring proper mounting and routing within the car chassis for a cost effective repair solution
- High-quality glass reinforced plastic resin provides both high temperature and environmental protection resistance
- Each direct replacement wire harness comes with a protective sleeve preventing wires from chafing and creating short circuits
- All ABS sensors are 100% tested for proper fit, form and function
Carquest Premium – Distributor Cap (Part No.CAC1087)
from
$21.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Distributor Cap and Rotor Kit (Part No.CAC1796)
from
$13.49
Distributor Cap and Rotor Kit
PerTronix – D4001 Flame-Thrower HEI Distributor Cap and Rotor Kit Red (Part No.D4001)
from
$42.99
Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provi
Product Features:
See More
Product Features:
- PerTronix D4001 Flame-Thrower HEI Distributor Cap and Rotor Kit Red
- Made from hi-performance 60 KV rated alkyd molding compound.
Motorcraft – Original Equipment (O.E.) Housing Assembly – Distributor Terminal (Part No.DH-411B)
from
$23.79
The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles.
Product Features:
See More
Product Features:
- Motorcraft and Ford Parts are used throughout Ford vehicles in a variety of applications that help ensure the proper build quality, integrity and long-lasting performance of every Ford car or truck.
- Motorcraft and Ford Parts are manufactured from first-quality materials – chosen specifically for maximum performance and application suitability.
- As with all Motorcraft and Ford Parts, any innovations or improvements developed since the vehicle’s manufacture are included in these after market replacement parts, ensuring the most current technology and performance.
PerTronix – D600700 Cap Black and Rotor 8 cylinder Flame-Thrower Billet Distributor (Part No.D600700)
from
$41.99
Replacement distributor cap and rotor for Flame-Thrower billet and cast distributors. High dielectric strength cap with male or female brass terminals with premium rotor with brass contact.
Product Features:
See More
Product Features:
- PerTronix D600700 Cap Black and Rotor 8 cylinder Flame-Thrower Billet Distributor
- Replacement distributor cap and rotor for Flame-Thrower billet and cast distributors
MSD Ignition – Cap/Rotor Kit; Street Fire; Ford V8; Socket (Part No.5506)
from
$48.49
All of the Street Fire components are spec’d by MSD engineers and designed to provide performance for the price. The quality of each part is backed up with a one year warranty!
Product Features:
See More
Product Features:
- Supplied w/Heavy Duty Rotor
- Low Resistance Terminals
- Full Power Output At High RPM
- Perfect For Budget Minded Enthusiasts
Carquest – Distributor Cap Adapter (Part No.C194A)
from
$18.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- Solid brass terminals (where available) make better connections and greater resistance to electrical pitting and corrosion
- RFI resistors where specified to eliminate radio static and potential ECU-damaging spikes
- Capitalizing on decades of research and development, our distributor caps and rotors contain unmatched quality yielding superior performance
- BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
PerTronix – D650711 Cap Male Red 8 cylinder Flame-Thrower Billet Distributor (Part No.D650711)
from
$51.99
Replacement distributor cap for Flame-Thrower distributors. High dielectric strength cap with male or female brass terminals.
Product Features:
See More
Product Features:
- PerTronix D650711 Cap Male Red 8 cylinder Flame-Thrower Billet Distributor
- Replacement distributor cap for Flame-Thrower distributors.
MSD Ignition – Rotor; Ford V8; Cap-A-Dapt (Part No.8407)
from
$15.79
MSD Ignition is a company built on Customer Satisfaction and Service. That is why all of MSD products go through regimented test procedures before they are ever packaged and shipped. MSD stands behind its products for one full year after purchase
Product Features:
See More
Product Features:
- Resist Carbon Tracking
- Low Resistance Brass
- Max Voltage Transfer
- Molded From Insulated Material
Carquest Premium – Distributor Rotor (Part No.DAA1112)
from
$20.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Distributor Rotor (Part No.DAA1009)
from
$12.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Distributor Rotor (Part No.DAA1002)
from
$4.29
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest – Distributor Rotor (Part No.D198)
from
$9.99
BWD SELECT designs, specifies, and manufactures replacement parts with one goal in mind-make them the very best. To maximize performance and longevity, we use the finest materials and improve on OE specifications, whenever possible.
Product Features:
See More
Product Features:
- High-quality direct replacement electrical connector allows you to replace only the damaged connector instead of the entire harness for a cost-effective repair
- The terminal is manufactured with high grade materials such as copper alloy, brass, and phosphor bronze. The housing is fabricated using polyamide resins. All of the materials together provide the connectors with prolonged life and superior performance.
- All electrical connectors are 100% tested for proper mechanical and electrical fit, form and function
- Offering thousands of high-quality pigtails & sockets for nearly every electrical job
Driveworks – Distributor Rotor (Part No.23050)
from
$4.05
Driveworks offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.
Product Features:
See More
Product Features:
- Direct-fit OE replacement ensures ease of installation
- Designed to meet OE performance
- As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
- As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
Carquest Premium – Distributor Rotor (Part No.DAA1094)
from
$11.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
MSD Ignition – Rotor; MSD Ford Distributors PN 8455; PN 8456 (Part No.8070)
from
$11.99
This replacement rotor is injection molded from high voltage isolation material with heavy duty construction. The rotor fits MSD Ford distributors PN 8455, 8456.
Product Features:
See More
Product Features:
- Resist carbon tracking
- Max Voltage Transfer
- Molded From Insulated Material
- Fits MSD PN[8455/8456]
- Fits MSD part numbers 8455 and 8456
Motorcraft – Original Equipment (O.E.) Rotor Assembly (Part No.DR-380A)
from
$8.99
The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles.
Product Features:
See More
Product Features:
- Motorcraft and Ford Parts are used throughout Ford vehicles in a variety of applications that help ensure the proper build quality, integrity and long-lasting performance of every Ford car or truck.
- Motorcraft and Ford Parts are manufactured from first-quality materials – chosen specifically for maximum performance and application suitability.
- As with all Motorcraft and Ford Parts, any innovations or improvements developed since the vehicle’s manufacture are included in these after market replacement parts, ensuring the most current technology and performance.
Carquest Premium – Distributor T2899A: 100% New, With Cap and Rotor (Part No.T2899A)
from
$103.99
Carquest Premium distributors are built to meet or exceed the original equipment (OE) specifications for each application. Our distributors are built by a manufacturer that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each distributor is supplied with the cap, rotor and any seals needed for installation. Carquest Premium distributors are 100% new and undergo extensive validation testing to ensure long-lasting ignition performance and reliability.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- 100% new unit with no core charges
- Precision machined shafts result in high speed accuracy and help prevent bearing failures
- Every distributor is tested to ensure reliable and long-lasting performance
- O-rings or gaskets included where applicable
- Precision Engineered ignition modules and plugs ensure proper performance plus precise connection.
- Precision machined and ground shafts assure high speed accuracy and prevent bearing failures.
- Original Equipment Equivalent high voltage ignition coils.
- 100% New Components and fasteners eliminate premature failures.
MSD Ignition – Ford 351C-460 Performance Distributor with Vacuum Advance (Part No.8350)
from
$569.99
MSD’s Ready-to-Run Ford distributors are the perfect upgrade for bulky Duraspark systems or ancient breaker point models. All you need to do is drop it in the engine, connect three wires and fire the engine. Each distributor features an ignition module that produces a powerful inductive spark to improve combustion of the fuel mixture resulting in quick starts, smooth idle and increased performance. The billet aluminum housings of these distributors are 5/8 In. smaller in diameter to accommodate induction setups and tight engine compartments. A maintenance-free magnetic pick-up is responsible for triggering the high voltage sparks while a sealed ball bearing guides an oversized shaft. Beneath the bolt down cap and MSD race rotor you’ll find MSD’s accurate mechanical advance assembly. Different advance springs and stop bushings are supplied so you can easily tune a curve to match your needs. Plus, there is a vacuum advance canister to increase economy on long drives.
Product Features:
See More
Product Features:
- Simple And Clean Installation w/Only Three Wires To Connect
- Built-in module produces a 7.5 amp single spark through high rpm
- Easy-to-adjust mech. advance w/supplied springs and stop bushings
- Vacuum advance canister for improved economy (can be locked out)
- CNC machined billet aluminum housing and billet aluminum base
- Housing Is 5/8 in. Smaller In Diameter Than Stock Ford Distr.
- Maintenance-free magnetic pickup and precision reluctor
- Polished steel shaft is guided by a sealed ball bearing
PerTronix – Flame-Thrower Electronic Distributor Billet (Part No.D130710)
from
$397.99
Plug n’ Play billet distributors are designed for maximum ignition performance at a price you can afford. Our distributors ship with Ignitor II technology modules. Replace your outdated points, electronic distributor or bulky HEIs with this performance
Product Features:
See More
Product Features:
- PerTronix D130710 Flame-Thrower Electronic Distributor Billet Ford Small Block Plug and Play with Ignitor II Technology Vacuum Advance Black Male Cap
- Precision CNC machined 6061-T6 billet aluminum housings are lightweight yet offer maximum strength.
PerTronix – Flame-Thrower Electronic Distributor Billet (Part No.D130711)
from
$397.99
Plug n’ Play billet distributors are designed for maximum ignition performance at a price you can afford. Our distributors ship with Ignitor II technology modules. Replace your outdated points, electronic distributor or bulky HEIs with this performance
Product Features:
See More
Product Features:
- PerTronix D130711 Flame-Thrower Electronic Distributor Billet Ford Small Block Plug and Play with Ignitor II Technology Vacuum Advance Red Male Cap
- Precision CNC machined 6061-T6 billet aluminum housings are lightweight yet offer maximum strength.
MSD Ignition – Distributor; Ford V8; 302 (Part No.8582)
from
$438.99
MSD Pro-Billet Distributors are the finest performance and racing distributors available. Every feature has been engineered to endure the rigors of high performance and racing engines. Whether cruising the streets or racing stock cars, dragsters, boats or trucks, MSD has a distributor for it. MSD uses state-of-the-art, Computer Numerical Controlled (CNC) mills and lathes to machine each housing. After a long series of precise cuts and movements, the billet is formed into a flawless distributor housing that is accurate to within 0.001″. The flex-free housings are lightweight, have no porosity or weak areas and look great on polished, show quality engines.
Product Features:
See More
Product Features:
- CNC machined billet aluminum housing and DuPont Rynite base
- Supplied w/Cap-A-Dapt and rotor (accepts MSD socket style caps)
- Must Be Used w/An MSD Ignition Control
- Mech. advance assem. can be locked out for crank trigger systems
- Nylon pads ensure smooth operation of the advance weights
- Advance weight pins are staked and tig welded to the plate
- Advance plate and weights are fine blanked from chrome moly steel
- QPQ coated for friction reduction
PerTronix – Flame-Thrower Electronic Distributor Billet (Part No.D130801)
from
$379.99
Plug n’ Play billet distributors are designed for maximum ignition performance at a price you can afford. Our distributors ship with Ignitor II technology modules. Replace your outdated points, electronic distributor or bulky HEIs with this performance
Product Features:
See More
Product Features:
- PerTronix D130801 Flame-Thrower Electronic Distributor Billet Ford Small Block Plug and Play with Ignitor II Technology Non Vacuum Advance Red Cap
- Precision CNC machined 6061-T6 billet aluminum housings are lightweight yet offer maximum strength.
Carquest Premium – Distributor T2669: 100% New, With Cap and Rotor (Part No.T2669)
from
$91.99
Carquest Premium distributors are built to meet or exceed the original equipment (OE) specifications for each application. Our distributors are built by a manufacturer that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each distributor is supplied with the cap, rotor and any seals needed for installation. Carquest Premium distributors are 100% new and undergo extensive validation testing to ensure long-lasting ignition performance and reliability.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- 100% new unit with no core charges
- Precision machined shafts result in high speed accuracy and help prevent bearing failures
- Every distributor is tested to ensure reliable and long-lasting performance
- O-rings or gaskets included where applicable
- Precision Engineered ignition modules and plugs ensure proper performance plus precise connection.
- Precision machined and ground shafts assure high speed accuracy and prevent bearing failures.
- Original Equipment Equivalent high voltage ignition coils.
- 100% New Components and fasteners eliminate premature failures.
MSD Ignition – Distributor; Ford TFI; 351W (Part No.8453)
from
$593.99
When you start making serious power with your EFI Ford, the stock distributor shaft is one of the weak links of the engine. These Pro-Billet models answer the need for an affordable replacement in a strong and great looking package. Each distributor starts as a solid billet that is secured into a state of the art computer numerical control (CNC) machine where it is transformed into a precision housing. Inside each housing there is a sealed ball bearing at the top of the shaft. This design is responsible for accurately guiding the oversized polished steel shaft throughout the entire RPM range of your engine. The shaft is also quip-coated for friction reduction and corrosion resistance. The Pro-Billet distributors use a stock-style trigger pick-up to accept factory connectors. For installation, you simply remove the stock distributor and bolt the Pro-Billet MSD in place! Each model is supplied with a special gear to work with the?factory camshafts.
Product Features:
See More
Product Features:
- Drop in billet replacement for late model Ford TFI 5.8L dist.
- Supplied w/steel gear to work w/factory roller camshafts
- Factory style ignition module connector accepts factory wiring
- CNC machined billet aluminum housing and billet aluminum base
- QPQ coated polished steel shaft; guided by sealed ball bearings
- Supplied w/Late Model Distributor Cap And Rotor
- Legal to install in all 50 states
MSD Ignition – Distributor; Ford 351W; with Edelbrock Victor Jr (Part No.85805)
from
$483.99
MSD Pro-Billet Distributors are the finest performance and racing distributors available. Every feature has been engineered to endure the rigors of high performance and racing engines. Whether cruising the streets or racing stock cars, dragsters, boats or trucks, MSD has a distributor for it. MSD uses state-of-the-art, Computer Numerical Controlled (CNC) mills and lathes to machine each housing. After a long series of precise cuts and movements, the billet is formed into a flawless distributor housing that is accurate to within 0.001″. The flex-free housings are lightweight, have no porosity or weak areas and look great on polished, show quality engines.
Product Features:
See More
Product Features:
- Same features as PN[8584]
- Use w/Edelbrock Victor Jr. man. for add. clearance at water neck
- No CARB Exemption Order Number
- Maintenance-free magnetic pickup and precision reluctor create stable trigger signals throughout the RPM range
- Polished steel shaft is QPQ coated and guided by two sealed ball bearings
- Advance weight pins are staked and tig welded to the plate
- Supplied with cap-a-dapt and rotor (accepts MSD socket style caps)
- Must be used with an MSD Ignition control
Mallory – Malry Unilite Dist.: 68-95 351C-460 Ford (Part No.3756701)
from
$538.99
The industry standard with adjustable mechanical advance curve. Triggered by photo-optic infrared LED system. Improved combustion efficiency and economy, increased spark plug life and cold weather starting, and maintenance free operation.
Product Features:
See More
Product Features:
- Improved Combustion And Economy
- Increased Spark Plug Life
- Improved Cold Weather Starting
- Maintenance Free Operation
- Accurate Spark Timing
- Self-Lubricating Bushings
- Years Of Trouble-Free Service
Popular 1956 Ford F-250 Distributors Categories
1956 Ford F-250 Distributors
Maybe you’re in the middle of a full rebuild of that 1956 Ford F-250. Maybe you just need a couple of Distributors. Either way, Advance Auto Parts has 5 different Distributors in our inventory ranging from $12.99 to $702.99. That means you can find the exact parts or products you need to keep that 1956 Ford F-250 running smoothly.
Distributors are only as good as their brand. We stock 3 different brands to make sure you have plenty of trusted parts to choose from for your 1956 Ford F-250. Carquest Premium, Carquest, and MSD Ignition are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Distributors for your 1956 Ford F-250, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Distributors to keep your 1956 Ford F-250 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Distributors Brands To Make Your 1956 Ford F-250 Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1956 Ford F-250 demands trusted brand parts and products to keep it running. Many trusted brands of Distributors make up Advance Auto Parts’ inventory, and all are ready to help make your F-250 the best it can be. Be sure to browse some of our top Distributors brands and parts.
FAQs for 1956 Ford F-250 Distributors
What are the most purchased Distributors for the 1956 Ford F-250?
Out of 5 Distributors for the 1956 Ford F-250, the most popular in our inventory are:
