1956 Ford F-100 Pickup Ignition and Tune-Up Products

Below you will find various in-demand Ford Ignition and Tune-Up Products, components and accessories for your 1956 F-100 Pickup. Advance Auto Parts has popular F-100 Pickup parts like Ignition Coils and Boots, Ignition Boots, Spark Plugs and more. You’ll also find aftermarket and OEM Ignition and Tune-Up Products for other F-100 Pickup model years including 1972, 1973, 1974, 1975, 1976, 1980, 1981, 1982, 1983 and more. Select a category of 1956 Ford F-100 Pickup Ignition and Tune-Up Products below and start saving instantly.

Popular 1956 Ford F-100 Pickup Ignition and Tune-Up Products Categories

Spark Plug Wire Set Cut To Fits

Ignition Coil Boots

Standard Spark Plug Wires

Optional Spark Plug Wires

Ignition Conversion Kits

Distributor Cap Kits

Distributor Rotor Buttons

Ignition Starter Switches

Spark Plug Non-Foulers

Points and Condensers and Kits

Essential Ignition and Tune-Up Products for 1956 Ford F-100 Pickups

from

$135.99

The original Ignitor module is ideal for restorations. Ignitor Module Kits are extremely easy to install and fit into your original distributor to maintain your stock look. No additional ignition box is required keeping a clean look under the hood. Ignitors are available for most distributors that came with mechanical breaker points and will cover AUTOMOTIVE, MARINE, INDUSTRIAL and AGRICULTURE applications.

Product Features:

Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
2:1 improvement over “points” in current fall time for increased coil output.
Rotating cobalt magnets trigger a Hall Effect integrated circuit; no points to burn; no moving parts to wear out.
Epoxy molding makes our module impervious to dirt, oil, grease and moisture.
Stable timing; no need for any adjustments.
Pair with a Flame Thrower Canister Coil for optimal performance
Legal in all 50 states and Canada (C.A.R.B. E.O. No. D-57-22)

from

$99.99

Put an end to high maintenance point ignition systems by utilizing a specialized electronic circuitry and an infrared signal. Stabilizes ignition timing from 1 to 10,000 RPM. Improves performance and fuel efficiency, easy to install with hand tools, reduces maintenance. It is built with the latest thermal clad based surface mount construction for maximum dependability and long life.

Product Features:

Most Accurate Ignition Timing System
Improves Performance And Fuel Economy
Easy To Install With Simple Hand Tools
Reduced Maintenance
Eliminates Changing Points

from

$22.99

Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Ignition Switch allows for reliable control of the vehicle’s electrical systems and engine start-up, enhancing convenience and ensuring consistent performance during operation. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:

Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

from

$23.05

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
Copper alloy conductors ensure superior electrical conductivity with low resistive losses
Our parts are 100% tested to verify both mechanical and electrical switching performance
Robust design and high grade materials meet the stringent demands of today’s service professional
BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$825.99

Early flathead racers and cruisers alike will be excited to see these front mount flathead distributors! These distributors are built around a CNC-machined billet aluminum housing for precise tolerances. The distributor is topped off with our own crab cap with spark plug style terminals for improved wire connections. Just under the cap and Rynite race rotor is MSD’s adjustable mechanical advance. This assembly features chromoly construction with Tig-welded weight pins to secure the precision fine blanked weights. MSD supplies different advance springs and stop bushings so you can dial-in an advance curve to meet your flathead’s specs. Just under the advance is MSD’s race-proven magnetic pick-up. This pickup, combined with a reluctor, produces accurate trigger signals that are responsible for firing the MSD Ignition control. Bring your flathead up to date with MSD Performance.

Product Features:

Designed for 1949-1953 8-BA Ford Flathead engines
No CARB Exemption Order Number
Does not require an MSD Ignition Control
Accepts Cap-A-Dapts
Supplied w/HEI style dist. cap/rotor/gear/roll pin/setup spacer
Nylon pads ensure smooth operation of the advance weights
Advance weight pins are staked and tig welded to the plate
Mech. advance assem. can be locked out for crank trigger systems

from

$799.99

MSD’s Ready-to-Run marine distributors are the perfect upgrade for boats that are relying on worn-out breaker points or weak ignition systems. These new distributors feature a powerful ignition module built into the billet aluminum housing. This module produces a stout inductive spark that will improve combustion of the fuel mixture for better drivability. Beneath the durable bolt-down, injection-molded cap, a maintenance-free magnetic pick-up produces accurate trigger signals while an oversized shaft is guided by a sealed ball bearing. An easy-to-adjust mechanical advance allows you to custom tailor a timing curve to match your application. The Ready-to-Run distributors are a breeze to install. Simply drop it in the engine and connect three wires and you’re Ready-to-Run across the lake! Supplied with a cap, rotor, gear and Weathertight wiring harness.

Product Features:

Only three wires to connect for a simple installation
High output module produces quick starts/smooth idle/performance
Accurate/maintenance-free magnetic pick-up never needs adjustment
Easy-to-adjust mech. advance w/supplied springs and stop bushings
No MSD Ignition control required
Equipped with flame arrestor holes machined into their billet aluminum housings
All units equipped with weather tight wiring harness

from

$47.99

Product Features:

SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
EPDM inner insulation stops power-robbing voltage leaks.
With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
Excellent interference suppression and consistent performance
Easy lock terminals for more convenient installation.
Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
Broad coverage available for most vehicles on the road today
Include grease pack to ensure easy installation and removal

from

$35.99

CARQUEST Premium Spark Plug Wire Sets are engineered to restore ignition wire reliability and performance. They are designed to meet or exceed OE design requirements, performance, fit, form and function of the OE wire. Stainless steel magnetic winding del

Product Features:

SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
EPDM inner insulation stops power-robbing voltage leaks.
With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
Excellent interference suppression and consistent performance
Easy lock terminals for more convenient installation.
Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
Broad coverage available for most vehicles on the road today
Include grease pack to ensure easy installation and removal

from

$15.99

The Ignition Contact Set is used in older vehicle applications to ground the ignition coil primary circuit and create the high secondary voltage required in the ignition process. Connected to the contact set is a condenser designed to absorb the high voltage spike created when the contact set opens.

Product Features:

Application matched component to ensure the system can be returned to like new condition.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$9.99

An Ignition Capacitor is a device that will absorb excessive voltage spikes in electrical systems. The typical location or use for a capacitor is inside a distributor tied into a point ignition system. The ignition capacitor may also be called a radio capacitor or condenser used in electrical devices which may be susceptible to voltage spikes.

Product Features:

Application matched component to ensure the system can be returned to like new condition.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$10.99

This spark plug non fouler is designed for easy installation on specified vehicles to protect spark plugs from fouling and damage. It is engineered for durability and reliable performance.

Product Features:

Direct replacement – this spark plug non fouler is designed for easy installation to protect spark plugs from fouling and damage on specified vehicles
Ideal solution – this non-fouler preserves spark plug life and is a reliable replacement for an original non-fouler that has failed due to corrosion
Durable construction – made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$40.99

Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provides cooler operating temperatures.

Product Features:

Made from hi-performance 60 KV rated alkyd molding compound.
Cap and rotor kits include nylon rotor hold-down screws.
Flame-Thrower dust covers provide a larger air gap around the coil.

from

$29.99

The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$140.99

Set includes terminals for engines with early type (socket) and late type (HEI spark plug top) distributor caps. 90 degree boots and terminals factory installed on one end.

Product Features:

Extra Long 8.5mm Wires So You Can Cut To Your Designed Length
Incl. both socket-style and spark plug-style boots and terminals
Includes Mini-Stripper-Crimper For Factory Style Crimps
Size Includes: [2]48/50/56 in./[3] 32 in. Wires/Boots/Terminals
Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately

from

$79.99

The street fire spark plug wires feature a low resistance conductor that’s wrapped in a sleek and durable black sleeve. The terminals are covered in black boots that protect the conductor from engine heat to ensure spark delivery.

Product Features:

Helically wound conductor suppresses electro and radio noise
Kevlar core combination for great strength and durability
Heavy Duty Terminals For Secure Connection
8mm silicone and synthetic jacket resists heat and abrasion
500 Ohms/ft. Resistance For Improved Spark Delivery And Power
Silicone Boots Protect Against High Exhaust Temps

from

$35.99

Product Features:

SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
EPDM inner insulation stops power-robbing voltage leaks.
With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
Excellent interference suppression and consistent performance
Easy lock terminals for more convenient installation.
Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
Broad coverage available for most vehicles on the road today
Include grease pack to ensure easy installation and removal

from

$140.99

Routing spark plug wires is an art form. It takes patience and time to route your wires away from the headers, through separators and to the distributor cap. Some wire sets fit perfect, but a lot of people want to build their own so they can route them exactly how they see fit. Our Universal spark plug wire sets come with the spark plug terminal and boot installed with the other end open. Distributor cap boots and terminals are included so you can cut the wire to the desired length, then install the terminal with the supplied Mini-Stripper-Crimper. It’s a little more work, but in the end it will be worth it.

Product Features:

Extra Long 8.5mm Wires So You Can Cut To Your Designed Length
Distributor Cap – Boots and Terminals Included
Incl. Mini-Stripper-Crimper

from

$6.99

The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine¿s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$12.99

BWD SELECT designs, specifies, and manufactures replacement parts with one goal in mind-make them the very best. To maximize performance and longevity, we use the finest materials and improve on OE specifications, whenever possible.

Product Features:

High-quality direct replacement electrical connector allows you to replace only the damaged connector instead of the entire harness for a cost-effective repair
The terminal is manufactured with high grade materials such as copper alloy, brass, and phosphor bronze. The housing is fabricated using polyamide resins. All of the materials together provide the connectors with prolonged life and superior performance.
All electrical connectors are 100% tested for proper mechanical and electrical fit, form and function
Offering thousands of high-quality pigtails & sockets for nearly every electrical job

from

$99.99

The traditional ACCEL combination of yellow wire and red spark plug boots has been added to these SuperStock Spiral Core 5000 Series wire sets, which feature color-matched wire and spark plug boots in blue, black, and red. With only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The results is higher performance through improved efficiency, quicker throttle response, and reduced emissions. This 8mm wire’s double silicone construction is rated to 550 degrees F. The high-gloss wire jacket resists moisture, chemicals, and heat extremes for longer life and great looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark plug terminals provide excellent long life, electrical conductivity, and corrosion resistance. Both universal and custom-fit applications are available for early and late model cars and trucks.

Product Features:

500 Ohms/ft Of Resistance
550 F Rated Silicone Jacket
Stainless Steel Plug Terminals
High RFI Suppression For Street And Strip Use
Universal And Import Coverage
High-strength Fiberglass Braid Construction
Pre And Post HEI Vehicles
8mm High Gloss Silicone Jacket

from

$71.99

ACCEL’s SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.

Product Features:

7mm And 8mm High Gloss Silicone Jacket
450 F Rated Silicone Jacket
Stainless Steel Plug Terminals
RFI Suppression For Street Driven Applications
Custom-fit Universal And Import Coverage
High-strength Fiberglass Braid Construction
Pre And Post HEI Vehicles

from

$84.99

Engineered with optimized low resistance, high turns ratio windings around an M36 high silicone magnetic steel E-core for higher energy and voltage outputs. Results in quicker starts, improved idle quality, and crisper throttle response. Compatible with late model Ford EEC-IV computer controlled ignition system equipped with a TFI distributor. Direct OEM replacement. Can also be used with an ACCEL, Mallory, Crane, Holley or MSD capacitive discharge ignition system. Special high temperature epoxy resists shock and vibration, while increasing thermal conductivity. Brass coil wire contact increases energy efficiency and resists corrosion better than aluminum. High dielectric strength ACCEL Yellow over-molded housing.

Product Features:

Direct Plug In Replacement Direct OE Fit
Advanced Bobbin Technology
Standard Motor Products SMP Fd-478
MSD 5527
Standard Motor Products SMP Fd-478
MSD 5527
Resists Shock And Vibration
Resists Corrosion

from

$79.99

Excellent high performance coil for vehicles that have been converted from points to a breakerless electronic distributor or electronic ignition system, where a canister type oil filled can coil is preferred. Designed with optimized low resistance, high turns ratio windings to work specifically with ACCEL 41, 51, 52, 61 & 71000 Series breakerless electronic replacement distributors. Engineered for higher energy output resulting in quicker starting, improved throttle response and more high RPM power. Special crimped and soldered internal connections ensure positive contacts. High performance tan Alkyd tower provides “”flashover”” protection to primary terminals. Available in “”ACCEL Yellow”” or Chrome Plated can.

Product Features:

Engineered for higher energy output
Improved throttle responce
More high RPM power
Chrome Plated

from

$7.29

Platinum Spark Plug (ASF32P) offers enhanced durability and reliability, making it the ideal choice for maintaining peak performance in Ford, Lincoln, and Mercury vehicles. Engineered to meet strict Ford standards, these spark plugs are crafted with a platinum center electrode tip and nickel ground electrode tip for superior resistance to oxidation and arc erosion. The tapered seat design ensures an exact fit, while the multi-rib insulator protects against misfires, optimizing emissions and reducing fuel consumption. With service intervals of up to 100,000 miles, these spark plugs deliver long-lasting reliability and help prevent false check engine lights. Backed by Motorcraft’s Service Parts Warranty, they are designed with high-quality materials to provide dependable performance across a wide range of domestic and import cars and trucks. Motorcraft Spark Plugs are the original equipment your vehicle was manufactured with, ensuring confidence and reliability for every drive.

Product Features:

Motorcraft spark plugs are matched to specific engines to provide enhanced durability, eliminate misfires, reduce fuel consumption and optimize emissions.
Backed by Motorcraft’s Service Parts Warranty
Exact fit for Ford, Lincoln and Mercury vehicles
Resistant to oxidation and arc erosion.
Multi-rib insulator protects against misfire.
Service intervals of up to 100,000 miles.
Motorcraft Spark Plugs are designed with high quality materials to provide reliable performance for almost any application.
Motorcraft Spark Plugs are what was in the vehicle when it was manufactured
Motorcraft ignition components help prevent false check engine lights.

from

$3.99

ACDelco Professional Conventional Spark Plugs are designed for reliability and efficient performance, and are a high quality replacement for many vehicles on the road today. Their high-quality copper cores and outstanding suppression characteristics deliver reliable performance. They are also available for Marine applications. These premium aftermarket replacement spark plugs are manufactured to meet your expectations for fit, form, and function.

Product Features:

Black Onyx coating helps reduce corrosion
Copper core provides great heat transfer and helps maximize plug durability
Ribbed suppressor seal extends resistance and helps prevent spark ‘flash over’ and misfires
Nickel-chrome alloy sheathing helps prevent corrosion on center electrode
Available for use in Marine applications

from

$79.99

Helically wound conductor suppresses electro and radio noise
Kevlar core combination for great strength and durability
Heavy Duty Terminals For Secure Connection
8mm silicone and synthetic jacket resists heat and abrasion
500 Ohms/ft. Resistance For Improved Spark Delivery And Power
Silicone Boots Protect Against High Exhaust Temps

from

$112.99

These ACCEL wire sets are custom tailored for true street and strip performance use. Features oversize 8.8 mm ultra performance wires and spark plug boots, 550 degrees Fahrenheit double silicone construction with fiberglass braid. Spiral wound steel core conductor.

Product Features:

8.8mm Graphite Suppression
Silicone Spark Plug Boots
550 Degree Double Silicone Construction
Fiberglass Braid
Carbon/Graphite Core
Magnetic Suppression
Fiberglass/Kevlar Core
500 Ohms Resistance

from

$78.99

Helically wound conductor suppresses electro and radio noise
Kevlar core combination for great strength and durability
Heavy Duty Terminals For Secure Connection
8mm silicone and synthetic jacket resists heat and abrasion
500 Ohms/ft. Resistance For Improved Spark Delivery And Power
Silicone Boots Protect Against High Exhaust Temps

Upgrade your 1956 Ford F-100 Pickup with Top-Quality Ignition and Tune-Up Products

When it comes to maintaining or upgrading your 1956 Ford F-100 Pickup, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Ignition and Tune-Up Products are key to keeping your F-100 Pickup functioning at its best. At Advance Auto Parts, we offer a wide selection of 29 Ignition and Tune-Up Products for the 1956 Ford F-100 Pickup, designed to meet your needs without breaking the bank. From Ignition Coils and Boot replacements to Ignition Boots upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Ignition and Tune-Up Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Ignition and Tune-Up Products for your 1956 Ford F-100 Pickup at great prices. Our Ignition and Tune-Up Products inventory for this model ranges from just $2.49 to $749.99, with an average price of $88.37. Our 29 Ignition and Tune-Up Products in stock come from 9 trusted brands, so you’re sure to find the right part for your 1956 Ford F-100 Pickup without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1956 Ford F-100 Pickup, we stock popular OEM and aftermarket Ignition and Tune-Up Products from top names like Mallory, Autolite, Carquest, and more. Mallory Ignition and Tune-Up Products start at just $133.99 and boast an impressive 4.9 stars average rating from customers. Autolite and Carquest also bring quality to the table, with Ignition and Tune-Up Products available starting at $4.29, and at an average 4.6 stars rating. With 60 customer reviews and counting, our 1956 Ford F-100 Pickup Ignition and Tune-Up Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Ignition and Tune-Up Product upgrades. Explore related part types like Oil and Lubricants, Fluids and Chemicals and more to make sure your 1956 Ford F-100 Pickup is always ready to roll. We’re committed to providing you with everything you need to keep your F-100 Pickup in top shape, all in one place. Start shopping confidently below for your 1956 Ford F-100 Pickup!

Best-Selling Ignition Coils and Boots for 1956 Ford F-100 Pickups

Enhance the driving experience in your Ford with 6 quality Ignition Coils and Boot components, starting at $35.99.

show more show less

from

$39.99

Product Features:

SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
EPDM inner insulation stops power-robbing voltage leaks.
With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
Excellent interference suppression and consistent performance
Easy lock terminals for more convenient installation.
Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
Broad coverage available for most vehicles on the road today
Include grease pack to ensure easy installation and removal

from

$43.99

Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Built by IATF 16949 certified manufacturers for consistent durability
Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
Segmented secondary bobbins to distribute high voltage and prevent shorting
Extensive design validation testing to ensure long-lasting reliability
100% end-of-line tested to ensure proper performance
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$41.49

Carquest ignition coils meet original equipment (OE) fit, form and function and are built to ensure reliable starting and performance. Carquest ignition coils are tested to ensure proper spark and perfect fit for each application. These ignition coils are an affordable repair choice to restore the vehicle’s ignition system performance. Carquest ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Long service life and durable performance
High dielectric strength for reliability
Corrosion-resistant connections
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
High reliability
Long service life

from

$79.99

An ACDelco Professional, premium aftermarket Ignition Coil is a high quality replacement for many vehicles on the road today. It increases electrical system voltage to help ignite the air/fuel mixture as the starting and charging system starts the engine, maintains the battery’s charge, and provides power to the electrical accessories while the engine is running. An ACDelco Professional Ignition Coil uses pure copper windings to improve durability and provides higher resistance to internal shorts and dielectric breakdown. Because the number and shape of the laminations determine the output characteristics of an ignition coil, ACDelco ensures that the silicone steel plates surrounding the ignition coil correctly match the original part size and number. Since steel laminations work best when they are new, shiny, and clean, ACDelco laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed. This premium aftermarket replacement ignition coil is manufactured to meet your expectations for fit, form, and function.

Product Features:

High quality coated windings to improve durability and provide protection against internal shorts and dielectric breakdown
Silicone steel plates surrounding the ignition coil correctly match the original part size and number exactly
Laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed
Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$35.99

Product Features:

SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
EPDM inner insulation stops power-robbing voltage leaks.
With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
Excellent interference suppression and consistent performance
Easy lock terminals for more convenient installation.
Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
Broad coverage available for most vehicles on the road today
Include grease pack to ensure easy installation and removal

from

$46.99

Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure confidence and product reliability, every time.

Most Popular 1956 Ford F-100 Pickup Ignition Boots

Customize your Ford with 1 Ignition Boots products like Spark Plug Boots, all priced under $71.99.

show more show less

from

$71.99

These ACCEL wire sets are a true performance upgrade replacement for OE types. Efficient delivery of spark energy for a good price. Silicone boots with black wire contain zinc-plated steel terminals. Noise suppression core. Set contains 8 plug wires with coil lead.

Product Features:

7mm And 8mm High Gloss Silicone Jacket
450° F Rated Silicone Jacket
Stainless Steel Plug Terminals
RFI Suppression For Street Driven Applications
Custom-fit Universal And Import Coverage
High-strength Fiberglass Braid Construction
Pre And Post HEI Vehicles

Top Picks for 1956 Ford F-100 Pickup Spark Plugs

Upgrade Ford F-100 Pickups with top-quality Spark Plugs parts, including 6 OEM and aftermarket selections for your 1956 model.

show more show less

from

$4.29

Autolite Copper spark plugs are designed to deliver reliable performance, ensuring quick starts and the power your vehicle demands. Featuring a copper core center electrode, these spark plugs excel in thermal control and resist fouling, while the high nickel alloy center and ground electrodes provide extended life. The high alumina multi-rib ceramic insulator enhances thermal conductivity and insulation, offering increased strength and durability. With a nickel-plated shell, these spark plugs resist corrosion for long-lasting performance. Engineered for optimal fuel economy, they help improve mileage while delivering smooth and responsive acceleration. Compliant with Original Equipment Service (OES) design Standards, they ensure dependable operation and a secure fit with their tapered seat type. The long projection center electrode and nickel tip materials further enhance their efficiency and reliability, making them a valuable addition to your vehicle’s ignition system.

Product Features:

The copper core center electrode aids in thermal control and improves resistance to fouling.
Its specially engineered high nickel alloy center and ground electrode provides extended life.
The high alumina multi-rib ceramic insulator provides thermal conductivity and superior insulation for increased strength.
Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended periods.
Good Fuel Economy: Designed to optimize fuel consumption, these spark plugs help you achieve better mileage.
Smooth Acceleration: Experience smoother and more responsive acceleration with Autolite Copper Core spark plugs.
OES Design Compliance: These spark plugs meet or exceed Original Equipment Service (OES) design requirements, ensuring reliable performance.
Tapered Seat Type: Featuring a tapered seat type, these spark plugs provide a secure fit and optimal performance.

from

$10.99

Direct replacement – this spark plug non fouler is designed for easy installation to protect spark plugs from fouling and damage on specified vehicles
Ideal solution – this non-fouler preserves spark plug life and is a reliable replacement for an original non-fouler that has failed due to corrosion
Durable construction – made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$71.99

7mm And 8mm High Gloss Silicone Jacket
450 F Rated Silicone Jacket
Stainless Steel Plug Terminals
RFI Suppression For Street Driven Applications
Custom-fit Universal And Import Coverage
High-strength Fiberglass Braid Construction
Pre And Post HEI Vehicles

from

$4.99

Autolite Platinum spark plugs are crafted for exceptional performance and durability, making them ideal for older engine applications. Featuring a platinum center electrode firing tip, these spark plugs ensure quicker firing, smoother starts, and enhanced acceleration while boosting fuel efficiency. The platinum firing tip resists gap erosion, extending the service life, while the high alumina ceramic insulator provides superior thermal conductivity and insulation for added strength. A multi-rib insulator prevents flash-over, and the nickel-plated shell offers corrosion resistance for long-lasting reliability. Designed with a tapered seat type, these spark plugs enhance performance and durability, ensuring a consistent and powerful spark. With a long projection center electrode and a performance-grade design, Autolite Platinum spark plugs deliver reliable ignition and optimal engine efficiency, making them a valuable upgrade for maintaining peak engine performance.

Product Features:

Engineered with a platinum firing tip that prevents gap erosion for longer service life.
Its high alumina ceramic insulator provides thermal conductivity and superior insulation for increased strength.
The multi-rib insulator prevents flash-over.
Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended life.
Tapered Seat Type: Enhances performance and durability for a longer-lasting spark plug.

from

$3.99

ACDelco Gold (Professional) Conventional Spark Plugs are a high quality alternative to Original Equipment (OE) parts. These Conventional Spark Plugs are designed for reliability and efficient performance, and are the high quality replacements for many vehicles on the road today. Their high-quality copper cores and outstanding suppression characteristics deliver reliable performance. They are also available for Marine applications. These premium aftermarket replacement spark plugs are manufactured to meet your expectations for fit, form, and function. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional.

Product Features:

Black Onyx coating helps reduce corrosion
Copper core provides great heat transfer and helps maximize plug durability
Ribbed suppressor seal extends resistance and helps prevent spark ‘flash over’ and misfires
Nickel-chrome alloy sheathing helps prevent corrosion on center electrode
Available for use in Marine applications
Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
Premium aftermarket replacement part
Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models

from

$2.49

Copper Plus Spark Plug RF14YC delivers dependable performance and durability, making it a reliable choice for your vehicle’s ignition system. Featuring a copper core center electrode, it ensures precise heat control and enhanced conductivity, promoting longer life and consistent wear. The patented TinTac and ULTRASEAL coated shell provide superior corrosion resistance, safeguarding the plug against harsh conditions. Additionally, the SAC-9 semiconductor resistor effectively suppresses EMI and RFI, ensuring smooth engine operation without interference. Built to ISO and SAE Standards, this spark plug guarantees proven performance and compatibility with a wide range of vehicles. Whether you’re seeking improved ignition efficiency or extended durability, this spark plug offers exceptional value and reliability for your automotive needs.

Product Features:

Copper Plus – Dependable Performance.
Copper core center electrode allows for accurate control of heat range for longer life
Patented TinTac and ULTRASEAL coated shell for maximum corrosion resistance
Patented SAC-9 semiconductor resistor for maximum EMI & RFI suppression
Built to ISO and SAE standards for proven performance

In-Demand Ignition Wires for 1956 Ford F-100 Pickups

Select from 3 premium Ignition Wires parts for your 1956 Ford F-100 Pickup, with prices ranging from $71.99 to $153.99.

show more show less

from

$153.99

Features at a glance, low 300 Ohm resistance spiral core delivers high energy output for maximum spark at the plug. Great RFI suppression meets the demands of today’s on-board electronics, such as electronic ignition, sound systems, and computer controls. 8MM ozone-resistant red silicone jacket repels water, oil, grease, and fuel, and withstands temperatures up to 500 degrees. Fits V8, universal wire kit: includes 45 degree spark plug boots, female socket (standard) distributor boots and terminals.

Product Features:

Most Advanced Wire By Mallory
RFI Suppression
High Temperature Silicone Jacket
Withstands Over 500+F
Come In Ready To Use Kits
Extra Long Kits

from

$133.99

Most Advanced Wire By Mallory
RFI Suppression
High Temperature Silicone Jacket
Withstands Over 500+F
Come In Ready To Use Kits
Extra Long Kits

from

$71.99

7mm And 8mm High Gloss Silicone Jacket
450° F Rated Silicone Jacket
Stainless Steel Plug Terminals
RFI Suppression For Street Driven Applications
Custom-fit Universal And Import Coverage
High-strength Fiberglass Braid Construction

Most Sold 1956 Ford F-100 Pickup Distributors

Explore our best-selling Ford parts for the 1956 F-100 Pickup among 5 OEM and aftermarket options starting from $13.99.

show more show less

from

$14.79

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$13.99

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$18.79

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$21.99

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$749.99

The Pro-Billet Y-Block Distributor is built around a CNC-machined billet aluminum housing that is fit with a sealed ball bearing guide for stability and endurance. From timing accuracy, a maintenance-free magnetic pickup reliably triggers the MSD Ignition Control.

Product Features:

Vacuum advance canister for improved economy (can be locked out)
CNC machined billet aluminum housing and billet aluminum base
Maintenance-free magnetic pickup and precision reluctor
Creates stable trigger signals throughout the rpm range
QPQ coated polished steel shaft; guided by sealed ball bearings
Advance plate and weights are fine blanked from chrome moly steel
QPQ coated for friction reduction
Mech. advance assem. can be locked out for crank trigger systems
Advance weight pins are staked and tig welded to the plate
Nylon pads ensure smooth operation of the advance weights
Requires an MSD ignition control
May hit firewall seam on 57-59 full size cars.

Top-Rated Ignition and Tune-Up Products Brands For Your 1956 Ford F-100 Pickup

Shop for the best-rated brands offering Ignition and Tune-Up Products and other products for your 1956 Ford F-100 Pickups. Below you’ll find some of our best rated Ignition and Tune-Up Products from Mallory, Autolite, and Carquest, and more. Ignition and Tune-Up Products from these brands that fit a 1956 F-100 Pickup start at just $4.29 and are rated as high as 4.9 stars. OEM and aftermarket Ignition and Tune-Up Products don’t get more top quality, durable, and affordable than from the brands below.

Popular Mallory 1956 Ford F-100 Pickup Ignition and Tune-Up Products

When it comes to maintaining or upgrading your 1956 Ford F-100 Pickup, using quality Ignition and Tune-Up Products is essential to ensure durability and a perfect fit. Mallory ticks all of those boxes. We offer a wide selection of Mallory Ignition and Tune-Up Products, specifically designed for the 1956 Ford F-100 Pickup. With over 2 Mallory brand Ignition and Tune-Up Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $133.99, with an average price of just $143.99. Plus, with over 3 customer reviews and an average rating of 4.9 stars, you can trust that our Mallory Ignition and Tune-Up Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $153.99

(2)

Mallory Prosidewinder 135F Univ/Wire Set

“Very high quality product for my show car. My car is a 1940 Ford Tudor Deluxe with a 1942 style ‘crab’ distributor. It still has the original engine t”

from $133.99

(1)

Mallory Prosidewinder 90F Univ. Wire Set

“Good quality wires with low impedence. The Advance listing says to get part 669 if you have male terminal distributor cap. This is not needed – the ”

Popular Autolite 1956 Ford F-100 Pickup Ignition and Tune-Up Products

Autolite auto parts is one of the highest quality Ignition and Tune-Up Product brands in the market. Any 1956 Ford F-100 Pickup owner should feel confident when installing genuine Autolite parts in their vehicle. To ensure the best fit and performance for your 1956 F-100 Pickup, Advance Auto Parts carries a full inventory of 1 Autolite Ignition and Tune-Up Products. Plus you will be keeping your Ford in peak condition while saving money because prices on these Autolite Ignition and Tune-Up Products range up to $4.29, plus, with more than 4 customer reviews and an impressive 4.6 stars average rating, you can be confident the Fram Ignition and Tune-Up Products below will deliver on both quality and value.

from $4.29

(4)

Copper Resistor Spark Plug: Quick Starts & Enhanced Durability

“Really helped”

FAQs for 1956 Ford F-100 Pickup Ignition and Tune-Up Products

Which Ignition and Tune-Up Products are best-sellers for 1956 Ford F-100 Pickups?

Out of 29 Ignition and Tune-Up Products that fit 1956 Ford F-100 Pickups, the following parts are the top sellers:

Copper Resistor Spark Plug: Quick Starts & Enhanced Durability (5390141) – $4.29
Ignition Coil: Meets or Exceeds OE Specifications, 1 Count (12351959) – $43.99
Ignition Coil: Meets OE Specifications, 1 Count (12352139) – $41.49

What’s the price range for 1956 Ford F-100 Pickup Ignition and Tune-Up Products?

Ignition and Tune-Up Product prices for the 1956 Ford F-100 Pickup start at $2.49 and go up to $749.99 for the most premium parts.

What’s the average price of a Ignition and Tune-Up Product for a 1956 Ford F-100 Pickup?

The average price for Ignition and Tune-Up Products for the 1956 Ford F-100 Pickup is $88.37. Keep in mind the variety of part types within our Ignition and Tune-Up Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Ignition and Tune-Up Products for other Ford F-100 Pickup model years?

Yes, we currently carry Ignition and Tune-Up Products for 26 model years of Ford F-100 Pickups between 1953 and 1983. Ignition and Tune-Up Products are bought most frequently for the following model years: 1983, 1982, 1981, 1980, 1976, 1975, 1974, 1973, and 1972.

What are the cheapest Ignition and Tune-Up Products for my 1956 Ford F-100 Pickup?

The cheapest 1956 Ford F-100 Pickup Ignition and Tune-Up Products we carry in stock are:

Copper Plus Spark Plug (RF14YC): Dependable Performance & Durability (89011699) – $2.49
Copper Core Spark Plug: Reliable Performance & Durability (5391423) – $3.99
Copper Resistor Spark Plug: Quick Starts & Enhanced Durability (5390141) – $4.29
Platinum Spark Plug: Enhanced Durability & Improved Performance (5393833) – $4.99
Spark Plug Non-Foulers – 18mm Tapered Seat (5014964) – $10.99

What are the top-rated Ignition and Tune-Up Products that fit the 1956 Ford F-100 Pickup?

Out of 60 reviews by customers, our 1956 Ford F-100 Pickup Ignition and Tune-Up Products have an average customer rating of . These are some of the highest-rated Ignition and Tune-Up Product types for the 1956 Ford F-100 Pickup and their top-rated products:

Ignition Coils and Boots
- Spark Plug Wire Set: 7 Wires, Increased performance, Designed for direct fit (19250137) – $39.99
Spark Plugs
- Spark Plug Wire Set: 7 Wires, Increased performance, Designed for direct fit (19250137) – $39.99

What types of Ignition and Tune-Up Products do you sell for my 1956 Ford F-100 Pickup?

As of 11/2/25, these are some of the most in-demand types of Ignition and Tune-Up Products for a 1956 Ford F-100 Pickup:

Can I get help with 1956 Ford F-100 Pickup Ignition and Tune-Up Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Ignition and Tune-Up Products and more.

What is your return policy for Ford F-100 Pickup Ignition and Tune-Up Products?

Advance Auto Parts keeps returns simple. For new Ford F-100 Pickup Ignition and Tune-Up Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1956 Ford F-100 Pickup Ignition and Tune-Up Products

PerTronix – 1261 Ignitor Ford 6 cyl (Part No.1261)

Accel – Module:Eliminator Replacement (Part No.2005)

Carquest Premium – Ignition Switch (Part No.CSC1393)

Carquest – Ignition Switch (Part No.CS120)

MSD Ignition – Distributor; Flathead Ford; Ready-to-Run; 49-53 (Part No.8573)

MSD Ignition – Distributor; Marine; Ford 351-460; Ready-to-Run (Part No.83506)

Carquest Premium – Spark Plug Wire Set: 9 Wires, Increased performance, Designed for direct fit (Part No.35-6165)

Carquest Premium – Spark Plug Wire Set (Part No.35-8195)

Carquest Premium – Ignition Contact Set (Part No.AKA1001)

Carquest Premium – Ignition Condenser (Part No.GAA1251)

Dorman – Help – Spark Plug Non-Foulers – 18mm Tapered Seat (Part No.42002)

PerTronix – D4150 Flame-Thrower Distributor Cap HEI/EST Black (Part No.D4150)

Carquest Premium – Distributor Cap (Part No.CAC1061)

MSD Ignition – Wire Set; Super Conductor; 8-cyl. Multi-Angle Plug; Socket/HEI (Part No.31199)

MSD Ignition – Wire Set; Street Fire; Ford 351C-460; Socket (Part No.5542)

Carquest Premium – Spark Plug Wire Set: 9 Wires, Increased performance, Designed for direct fit (Part No.35-8193)

MSD Ignition – Wire Set; Super Conductor; 8-cyl. 90f Plug/90f Plug (Part No.31229)

Carquest – Distributor Rotor (Part No.23A1017)

Carquest – Distributor Rotor (Part No.D166)

Accel – 8Mm Super Stock Spiral Uni Bk (Part No.5040K)

Accel – 8Mm Super Stock Graphite Uni (Part No.4040B)

Accel – Ford 1984-98 Eec-Iv Supercoil (Part No.140012)

Accel – Super Stock Elect Coil Chrome (Part No.8145C)

Motorcraft – Platinum Spark Plug (ASF32P): Enhanced Durability & Reliability (Part No.SP-501)

ACDelco – Copper Core Spark Plug: Reliable Performance & Durability (Part No.C45L)

MSD Ignition – Wire Set; Street Fire; Ford 289-302; Socket (Part No.5543)

Accel – Custom Fit Spark Plug Wire Set (Part No.8854)

MSD Ignition – Wire Set; Street Fire; Multi-Angle plug; HEI; Universal (Part No.5550)

Carquest Premium – Spark Plug Wire Set: 7 Wires, Increased performance, Designed for direct fit (Part No.35-6188)

Carquest Premium – Ignition Coil: Meets or Exceeds OE Specifications, 1 Count (Part No.EBC1414)

Carquest – Ignition Coil: Meets OE Specifications, 1 Count (Part No.26C1041)

ACDelco – Ignition Coil (Part No.U505)

Carquest Premium – Spark Plug Wire Set: 9 Wires, Increased performance, Designed for direct fit (Part No.35-8193)

Carquest Premium – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.EBC1715)

Accel – Universal Fit Super Stock 8mm Suppression; Spark Plug Wire Set (Part No.4040R)

Autolite – Copper Resistor Spark Plug: Quick Starts & Enhanced Durability (Part No.46)

Dorman – Help – Spark Plug Non-Foulers – 18mm Tapered Seat (Part No.42002)

Accel – 8Mm Super Stock Graphite Uni (Part No.4040B)

Autolite – Platinum Spark Plug: Enhanced Durability & Improved Performance (Part No.AP46)

ACDelco – Copper Core Spark Plug: Reliable Performance & Durability (Part No.R85TS)

Champion – Copper Plus Spark Plug (RF14YC): Dependable Performance & Durability (Part No.21)

Mallory – Mallory Prosidewinder 135F Univ/Wire Set (Part No.947)

Mallory – Mallory Prosidewinder 90F Univ. Wire Set (Part No.937)

Accel – Universal Fit Super Stock 8mm Suppression; Spark Plug Wire Set (Part No.4040K)

Carquest Premium – Distributor Cap (Part No.CAC1066)

Carquest Premium – Distributor Rotor (Part No.DAA1009)

Carquest – Distributor Cap (Part No.24C1029)

Carquest Premium – Distributor Cap (Part No.CAC1087)

MSD Ignition – Distributor; Pro Billet; Ford Y-Block (Part No.83831)