1956 Ford Club Ignition and Tune-Up Products

Essential 1956 Ford Club Ignition and Tune-Up Products

Accel – 8Mm Super Stock Spiral Uni Bk (Part No.5040K)

8Mm Super Stock Spiral Uni Bk

from

$91.99
The traditional ACCEL combination of yellow wire and red spark plug boots has been added to these SuperStock Spiral Core 5000 Series wire sets, which feature color-matched wire and spark plug boots in blue, black, and red. With only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The results is higher performance through improved efficiency, quicker throttle response, and reduced emissions. This 8mm wire’s double silicone construction is rated to 550 degrees F. The high-gloss wire jacket resists moisture, chemicals, and heat extremes for longer life and great looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark plug terminals provide excellent long life, electrical conductivity, and corrosion resistance. Both universal and custom-fit applications are available for early and late model cars and trucks.

Product Features:
  • 500 Ohms/ft Of Resistance
  • 550 F Rated Silicone Jacket
  • Stainless Steel Plug Terminals
  • High RFI Suppression For Street And Strip Use
  • Universal And Import Coverage
  • High-strength Fiberglass Braid Construction
  • Pre And Post HEI Vehicles
  • 8mm High Gloss Silicone Jacket
See More

Carquest Premium – Spark Plug Wire Set: 9 Wires, Increased performance, Designed for direct fit (Part No.35-8307)

Spark Plug Wire Set: 9 Wires, Increased performance, Designed for direct fit

from

$35.99
Product Features:
  • SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
  • Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
  • 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
  • EPDM inner insulation stops power-robbing voltage leaks.
  • With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
  • Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
  • Excellent interference suppression and consistent performance
  • Easy lock terminals for more convenient installation.
  • Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
  • Broad coverage available for most vehicles on the road today
  • Include grease pack to ensure easy installation and removal
See More

Driveworks – Distributor Rotor (Part No.23050)

Distributor Rotor

from

$4.05
Driveworks offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.

Product Features:
  • Direct-fit OE replacement ensures ease of installation
  • Designed to meet OE performance
  • As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
  • As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
See More

Carquest Premium – Distributor Rotor (Part No.DAA1002)

Distributor Rotor

from

$4.29
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

PerTronix – Ignitor for Ford 8 Cylinder Engines – Increased Power & Fuel Economy (Part No.1281)

Ignitor for Ford 8 Cylinder Engines - Increased Power & Fuel Economy

from

$117.99
For over thirty years, the Ignitor has proven itself in applications ranging from race cars to tractors. The Ignitor replaces breaker points and troublesome factory electronic ignitions with a dependable, self contained and maintenance free electronic ign

Product Features:
  • PerTronix 1281 Ignitor Ford 8 cyl
  • Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
See More

PerTronix – 1261 Ignitor Ford 6 cyl (Part No.1261)

1261 Ignitor Ford 6 cyl

from

$124.99
For over thirty years, the Ignitor has proven itself in applications ranging from race cars to tractors. The Ignitor replaces breaker points and troublesome factory electronic ignitions with a dependable, self contained and maintenance free electronic ign

Product Features:
  • PerTronix 1261 Ignitor Ford 6 cyl
  • Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
See More

Accel – Universal Fit 300+ Race Spark Plug Wire Set (Part No.7040)

Universal Fit 300+ Race Spark Plug Wire Set

from

$176.99
The oversized 8.8mm wire features a double silicone construction rated at over 600 F and 60kV. High gloss black silicone wire jacket not only looks great, but resists heat extremes, petrochemicals, ozone and moisture better than so-called blended materials for greater durability and longer life. High-density, high-temperature silicone insulation provides greater dielectric strength and eliminates arcing and the effects of corona better than typical OE style rubber materials. All-Kevlar stranded inner core and fiberglass braiding add greater pull strength and terminal retention. Stainless steel and brass terminals provide unsurpassed electrical conductivity and excellent corrosion resistance compared to terminals made of common or plated metals.

Product Features:
  • 150 Ohms/ft Of Resistance
  • 600 F Rated Silicone Jacket
  • Stainless Steel Plug Terminals
  • Custom-fit Universal And Import Coverage
  • Pre And Post HEI Vehicles
  • Spiral-Wound Copper/Nickel Alloy
See More

Accel – 8Mm Super Stock Copper Uni (Part No.4038B)

8Mm Super Stock Copper Uni

from

$72.99
These ACCEL Super Stock wire sets are a true performance upgrade replacement for OE types. Efficient delivery of spark energy for a good price. Silicone boots with zinc-plated steel terminals.

Product Features:
  • Tinned copper core allows virtually no resistance
  • Great for points and magneto
  • 450 Degree Wire Temperature Rating
  • Meets Or Exceeds OE Boot Temperature Rating
See More

Carquest Premium – Spark Plug Wire Set: 7 Wires, Increased performance, Designed for direct fit (Part No.35-6188)

Spark Plug Wire Set: 7 Wires, Increased performance, Designed for direct fit

from

$35.99
Product Features:
  • SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
  • Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
  • 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
  • EPDM inner insulation stops power-robbing voltage leaks.
  • With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
  • Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
  • Excellent interference suppression and consistent performance
  • Easy lock terminals for more convenient installation.
  • Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
  • Broad coverage available for most vehicles on the road today
  • Include grease pack to ensure easy installation and removal
See More

Carquest Premium – Spark Plug Wire Set: 9 Wires, Increased performance, Designed for direct fit (Part No.35-8194)

Spark Plug Wire Set: 9 Wires, Increased performance, Designed for direct fit

from

$35.99
Product Features:
  • SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
  • Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
  • 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
  • EPDM inner insulation stops power-robbing voltage leaks.
  • With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
  • Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
  • Excellent interference suppression and consistent performance
  • Easy lock terminals for more convenient installation.
  • Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
  • Broad coverage available for most vehicles on the road today
  • Include grease pack to ensure easy installation and removal
See More

MSD Ignition – Cap/Rotor Kit; Street Fire; Ford V8; Socket (Part No.5506)

Cap/Rotor Kit; Street Fire; Ford V8; Socket

from

$48.49
All of the Street Fire components are spec’d by MSD engineers and designed to provide performance for the price. The quality of each part is backed up with a one year warranty!

Product Features:
  • Supplied w/Heavy Duty Rotor
  • Low Resistance Terminals
  • Full Power Output At High RPM
  • Perfect For Budget Minded Enthusiasts
See More

Carquest – Distributor Cap (Part No.C154)

Distributor Cap

from

$16.05
BWD SELECT replacement parts are designed, specified and manufactured with one goal in mind – to make them the very best. We use the finest materials and improve on OE specifications whenever possible. The result is maximum performance and longevity.

Product Features:
  • Distributor cap uses glass-filled polyester resin with dielectric strength as high as 630 volts per mil, for optimum performance.
  • Distributor cap has aluminum terminals to match OE performance.
  • The BWD SELECT® exceed the original performance. The benefit is greater customer confidence.
  • BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

Motorcraft – Spark Plug (BSF82CA) (Part No.SP-431-A)

Spark Plug (BSF82CA)

from

$4.79
Motorcraft Spark Plugs are original equipment on Ford Motor Company vehicles engineered to meet strict Ford engineering standards to provide original equipment performance and reliability. Delivering performance, reliability and confidence, Motorcraft spa

Product Features:
  • Motorcraft spark plugs are matched to specific engines to provide enhanced durability, eliminate misfires, reduce fuel consumption and optimize emissions.
  • Backed by Motorcraft’s Service Parts Warranty
  • Exact fit for Ford, Lincoln and Mercury vehicles
  • Resistant to oxidation and arc erosion.
  • Multi-rib insulator protects against misfire.
  • Service intervals of up to 100,000 miles.
  • Motorcraft Spark Plugs are designed with high quality materials to provide reliable performance for almost any application.
  • Motorcraft Spark Plugs are what was in the vehicle when it was manufactured
  • Motorcraft ignition components help prevent false check engine lights.
See More

Champion – Copper Plus Small Engine Spark Plug Dependable Performance, OE Replacement RH10C (Part No.854)

Copper Plus Small Engine Spark Plug Dependable Performance, OE Replacement RH10C

from

$2.29
Dependable performance. This Champion® spark plug features a copper core electrode that provides increased conductivity and heat control for good overall wear.

Product Features:
  • Copper Plus – Dependable Performance and Durability
  • OE type replacement plug
  • Resists fouling
  • Copper core center electrode allows for accurate control of heat range for longer life
  • Superior corrosion resistance
  • Built to ISO and SAE standards for proven performance
See More

Mallory – Malry Unilite Dist.: 49-53 Flathead Ford (Part No.3727501)

Malry Unilite Dist.: 49-53 Flathead Ford

from

$499.99
The industry standard with adjustable mechanical advance curve. Triggered by photo-optic infrared LED system. Improved combustion efficiency and economy, increased spark plug life and cold weather starting, and maintenance free operation.

Product Features:
  • Improved Combustion And Economy
  • Increased Spark Plug Life
  • Improved Cold Weather Starting
  • Maintenance Free Operation
  • Accurate Spark Timing
  • Self-Lubricating Bushings
  • Years Of Trouble-Free Service
See More

MSD Ignition – Distributor; Ford Y Block; Ready-to-Run (Part No.8383)

Distributor; Ford Y Block; Ready-to-Run

from

$774.99
MSD is excited to offer two ready-to-run distributors for two classic Ford engines. These distributors are the answer to weak breaker points or rebuilt aftermarket models. Inside the billet housing there is a high-output ignition module. When the maintenance-free magnetic pick-up signals the module to fire, up to 7.5 amps is sent to the coil where a powerful spark is created. This improved spark output results in quick starts, snappy throttle response and terrific drivability. The distributors are equipped with a vacuum advance canister for cruising economy. Plus, there is a mechanical advance assembly that is mounted on top of the distributor shaft making it easy to adjust the advance to meet your needs. Another great feature of the ready-to-run distributors is their simple installation. All you need to do is connect three wires and you’ll be cruising.

Product Features:
  • Now includes built-in Rev Limiter
  • No CARB Exemption Order Number
  • Does not require an MSD Ignition Control
  • Built-in module produces a 7.5 amp single spark through high rpm
  • Vacuum advance canister for improved economy (can be locked out)
  • CNC machined billet aluminum housing and billet aluminum base
  • Housing Is 5/8 in. Smaller In Diameter Than Stock Ford Distr.
See More

PerTronix – 12823 Magnet Sleeve (only) for 1282 Ignitor Kit (Part No.12823)

12823 Magnet Sleeve (only) for 1282 Ignitor Kit

from

$51.99
For over thirty years, the Ignitor has proven itself in applications ranging from race cars to tractors. The Ignitor replaces breaker points and troublesome factory electronic ignitions with a dependable, self contained and maintenance free electronic ign

Product Features:
  • PerTronix 12823 Magnet Sleeve (only) for 1282 Ignitor Kit
  • Replacement Parts (only) for Ignitor and Ignitor II Kits
See More

Carquest Premium – Distributor Vacuum Advance (Part No.VBC1035)

Distributor Vacuum Advance

from

$46.99
The distributor is just one piece of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:
  • All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
See More

Carquest Premium – Distributor Vacuum Advance (Part No.VBC1039)

Distributor Vacuum Advance

from

$36.99
CARQUEST premium engine management products provide the right automatic transmission speed sensor for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions. Designed to meet OE quali

Product Features:
  • Lifecycle tested to meet or exceed OE specifications
  • Direct OE replacement
  • High strength thermoplastic is resistant to shock, temperature and chemicals. Also protects internal components from moisture and contaminants.
  • Global coverage for import and/or domestic applications.
See More

Dorman – Help – Spark Plug Non-Foulers – 18mm Tapered Seat (Part No.42002)

Spark Plug Non-Foulers - 18mm Tapered Seat

from

$9.99
This spark plug non fouler is designed for easy installation on specified vehicles to protect spark plugs from fouling and damage. It is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this spark plug non fouler is designed for easy installation to protect spark plugs from fouling and damage on specified vehicles
  • Ideal solution – this non-fouler preserves spark plug life and is a reliable replacement for an original non-fouler that has failed due to corrosion
  • Durable construction – made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – Ignition Condenser (Part No.GAA1037)

Ignition Condenser

from

$11.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Driveworks – Contact Set (Points) (Part No.12002)

Contact Set (Points)

from

$8.05
Driveworks® offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.

Product Features:
  • Direct-fit OE replacement ensures ease of installation
  • Designed to meet OE performance
  • As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
  • As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
See More

Carquest Premium – Ignition Coil: Meets or Exceeds OE Specifications, 1 Count (Part No.EBC1414)

Ignition Coil: Meets or Exceeds OE Specifications, 1 Count

from

$41.49
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Built by IATF 16949 certified manufacturers for consistent durability
  • Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
  • Segmented secondary bobbins to distribute high voltage and prevent shorting
  • Extensive design validation testing to ensure long-lasting reliability
  • 100% end-of-line tested to ensure proper performance
  • Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
See More

Carquest Premium – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.EBC1715)

Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece

from

$41.49
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
  • 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
  • Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure confidence and product reliability, every time.
See More

ACDelco – Ignition Coil (Part No.U505)

Ignition Coil

from

$78.99
An ACDelco Professional, premium aftermarket Ignition Coil is a high quality replacement for many vehicles on the road today. It increases electrical system voltage to help ignite the air/fuel mixture as the starting and charging system starts the engine, maintains the battery’s charge, and provides power to the electrical accessories while the engine is running. An ACDelco Professional Ignition Coil uses pure copper windings to improve durability and provides higher resistance to internal shorts and dielectric breakdown. Because the number and shape of the laminations determine the output characteristics of an ignition coil, ACDelco ensures that the silicone steel plates surrounding the ignition coil correctly match the original part size and number. Since steel laminations work best when they are new, shiny, and clean, ACDelco laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed. This premium aftermarket replacement ignition coil is manufactured to meet your expectations for fit, form, and function.

Product Features:
  • High quality coated windings to improve durability and provide protection against internal shorts and dielectric breakdown
  • Silicone steel plates surrounding the ignition coil correctly match the original part size and number exactly
  • Laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

Accel – 7Mm Super Stock Copper Uni (Part No.3008)

7Mm Super Stock Copper Uni

from

$53.09
ACCEL’s SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.

Product Features:
  • 7mm Yellow Silicone Jacket
  • Street-driven Applications
  • Copper Core
  • Orange Spark Plug Boots
  • Pre HEI Vehicles
  • Universal Wire Set
See More

Accel – Universal Fit Super Stock 8mm Suppression; Spark Plug Wire Set (Part No.4040R)

Universal Fit Super Stock 8mm Suppression; Spark Plug Wire Set

from

$65.99
These ACCEL wire sets are a true performance upgrade replacement for OE types. Efficient delivery of spark energy for a good price. Silicone boots with black wire contain zinc-plated steel terminals. Noise suppression core. Set contains 8 plug wires with coil lead.

Product Features:
  • 7mm And 8mm High Gloss Silicone Jacket
  • 450° F Rated Silicone Jacket
  • Stainless Steel Plug Terminals
  • RFI Suppression For Street Driven Applications
  • Custom-fit Universal And Import Coverage
  • High-strength Fiberglass Braid Construction
  • Pre And Post HEI Vehicles
See More

PerTronix – 808415 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 115 Degree Red (Part No.808415)

808415 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 115 Degree Red

from

$81.99
8mm Custom fit MAGx2 wires are available for many popular applications equipped with Flame-Thrower or original GM HEI distributors. Our custom wire sets have factory terminated ends for a superior connection and perfect fit, without cuttting, crimping and

Product Features:
  • PerTronix 808415 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 115 Degree Red
  • Two current paths for reliability and redundancy. -Primary path: Spiral wound stainless steel alloy.-Secondary path: Carbon impregnated fiberglass center core.
See More

1956 Ford Club Ignition and Tune-Up Products

You count on your 1956 Ford Club to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Ignition and Tune-Up Products. With 55 Ignition and Tune-Up Products ranging in price from $1.29 to $774.99, you’re sure to find everything you need for your 1956 Ford Club.

Brands matter. If you want to shop a specific Ignition and Tune-Up Products brand, we stock 13 different brands like NGK, Autolite, and Accel. 1956 Ford Club Ignition and Tune-Up Products start as low as $1.29!

One of the best ways to find top quality OEM or aftermarket Ignition and Tune-Up Products is by asking professionals. Short of that, you can shop with confidence thanks to our 309 extensive product reviews on 1956 Ford Club Ignition and Tune-Up Products. Some of the top-rated Ignition and Tune-Up Products products we carry are Ignition Coil with 4.5 stars and 8Mm Super Stock Spiral Uni Bu with 3.9 stars.

Did we mention you can order your Ignition and Tune-Up Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Ignition and Tune-Up Products inventory for your 1956 Ford Club below to get started!

Top-Rated Ignition and Tune-Up Products Brands For Your 1956 Ford Club

Trusted Ignition and Tune-Up Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1956 Ford Club running right for years to come. In our inventory you’ll find brands like NGK, Autolite, Accel, and even more.

Popular Carquest Ignition and Tune-Up Products

You’ll find popular Carquest brand products across Ignition Coils and Boots. All are waiting to get your 1956 Ford Club back on the road. Some of the top-rated Carquest products in these categories are:
Ignition Coil
from $39.05
(3)
Ignition Coil
Ignition Coils

FAQs for 1956 Ford Club Ignition and Tune-Up Products

What are the most purchased Ignition and Tune-Up Products for the 1956 Ford Club?

Out of 55 Ignition and Tune-Up Products for the 1956 Ford Club, the most popular in our inventory are:
Spark Plug Non-Foulers - 18mm Tapered Seat
from $9.99
(8)
Spark Plug Non-Foulers – 18mm Tapered Seat
Spark Plug Non-Foulers

What are the top-rated 1956 Ford Club Ignition and Tune-Up Products?

Top-rated Ignition and Tune-Up Products for your 1956 Ford Club based on customer reviews/ratings are:
Ignition Coil
from $35.05
(17)
Ignition Coil
“I used this on my 1950 ford tractor.”
8Mm Super Stock Spiral Uni Bu
from $89.99
(9)
8Mm Super Stock Spiral Uni Bu
“NA”
8Mm Super Stock Spiral Uni Bk
from $91.99
(5)
8Mm Super Stock Spiral Uni Bk
“I’m very happy with my 8mm spiral wires from Accel. Installed in a 94 deville 4.9 and it looks like a factory install other than the labeled wires. My”