1956 Chrysler Town & Country Fuel and Emissions Systems
More 1956 Chrysler Town & Country Fuel and Emissions Systems Categories
If you’re looking for an original Fuel and Emissions Systems replacement for a 1956 Chrysler Town & Country, you can search through our selection below. You’ll also find aftermarket and OEM Fuel and Emissions Systems to meet your needs.
Essential 1956 Chrysler Town & Country Fuel and Emissions Systems
Delphi – Electric Fuel Pump: With Blade Terminals, Hose Clamps, Inlet Adapter, Insulating Sleeve, Seals (Part No.FE0516)
from
$101.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
Product Features:
See More
Product Features:
- Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
- Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
- Improved pump performance as a result of Delphi’s innovative design and durability
- Restores fast pressure performance and system integrity, translating to better pumping through less energy
- Part is validated, tested and matched to the right vehicle application
- Lower amperage draws less load on vehicle’s electrical system
- Always be sure to check and clean fuel tank to avoid unnecessary returns
- Always replace the fuel strainer when doing a fuel pump repair
Mr. Gasket – Electric Fuel Pump (Part No.12S)
from
$64.99
Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flows 35 GPH (gallons per hours at 4-7 PSI (pounds per square inch). Universal design for most domestic 4, 6, & 8-cylinder carburetor applications.
Product Features:
See More
Product Features:
- Solid-state Worry Free Electronics
- Internal Pressure Regulating
- Universal Design Allows For Easy Installation
- No DiaphraGMs Or Mechanical Parts To Wear Out
- They Make An Excellent Fuel Transfer or Booster Pump
- Not designed for use on aircraft of any type.
- Hose Barbs Fit 5/16″ Fuel Hose
- Self-priming, 2 wire design
- Eliminates vapor lock and flooding
Carquest Premium – Fuel Pump Module Assembly M212891: Fuel Pump, Sending Unit and Strainer (Part No.M212891)
from
$117.99
Carquest Premium fuel pump modules and assemblies are built to meet or exceed Original Equipment (OE) specifications for fit, form and function. We have invested in industry-leading quality improvements like upgraded turbine impellers and 100% carbon commutators to deliver greater reliability. Carquest Premium fuel pump modules are supplied with the pump strainer and gaskets or seals when required for the application. Carquest Premium fuel pump modules are engineered with superior quality components to provide the longest life and reliable performance.
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications for fit, form and function
- 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
- OE upgraded turbine impellers greatly reduce fuel pulsation
- All fuel pumps are 100% performance tested
- Includes installation gaskets or seals where applicable
Spectra Premium – Fuel Module (Part No.SP7172M)
from
$170.99
CARQUEST fuel pump modules offer OEM or better performance from an Original Equipment Supplier. The latest advancements in fuel delivery technology are built-in to every CARQUEST Fuel Pump to deliver greater reliability.
Product Features:
See More
Product Features:
- Every single pump is 100% tested throughout the entire manufacturing process for worry free, out-of-the-box performance
- Triple barb hose fitting provides superior, long-lasting seal
- Superior return porting for optimum fuel flow
- Enhanced pump to flange harness design provides worry-free electrical performance
- Ceramic sender card and float arm that utilizes vehicle-specific geometry to ensure accurate fuel gauge readings for each and every application
- Gradient density, dual zone filtration designed for better contamination resistance
Carquest Premium – Fuel Pump Module Assembly: Fuel Pump, Sending Unit and Strainer (Part No.M260329)
from
$194.99
Carquest Premium fuel pump modules and assemblies are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. We have invested in industry-leading quality improvements like upgraded turbine impellers and 100% carbon commutators to deliver greater reliability. Carquest Premium fuel pump modules are supplied with the pump strainer and gaskets or seals when required for the application. Carquest Premium fuel pump modules are engineered with superior quality components to provide the longest life and reliable performance.
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications for fit, form and function
- 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
- OE upgraded turbine impellers greatly reduce fuel pulsation
- All fuel pumps are 100% performance tested
- Includes installation gaskets or seals where applicable
Delphi – Electric Fuel Pump: With Blade Terminals, Hose Clamps, Inlet Adapter, Insulating Sleeve, Seals (Part No.FE0514)
from
$147.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
Product Features:
See More
Product Features:
- Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
- Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
- Improved pump performance as a result of Delphi’s innovative design and durability
- Restores fast pressure performance and system integrity, translating to better pumping through less energy
- Part is validated, tested and matched to the right vehicle application
- Lower amperage draws less load on vehicle’s electrical system
- Always be sure to check and clean fuel tank to avoid unnecessary returns
- Always replace the fuel strainer when doing a fuel pump repair
Delphi – Fuel Pump Module Assembly: With Float Arm, Seal (Part No.FG0483)
from
$189.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
Product Features:
See More
Product Features:
- Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
- Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
- Lower amperage draws less load on vehicle’s electrical system
- Part is validated, tested and matched to the right vehicle application
- Always be sure to check and clean fuel tank to avoid unnecessary returns
- Lower failure rates due to its innovative design and durability
KAI – Fuel Pump Module Assembly (Part No.FMD010083)
from
$59.99
New Platinum Pro Fuel Pump Module
Product Features:
See More
Product Features:
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Delphi – Fuel Pump Module Assembly: With Float Arm, Seal (Part No.FG0195)
from
$213.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
Product Features:
See More
Product Features:
- Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
- Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
- Lower amperage draws less load on vehicle’s electrical system
- Part is validated, tested and matched to the right vehicle application
- Always be sure to check and clean fuel tank to avoid unnecessary returns
- Lower failure rates due to its innovative design and durability
VDO – Electric Fuel Pump Assembly (Part No.E30011324494VDO)
from
$369.44
The VDO Electric Fuel Pump Assembly meets or exceeds the OE specifications for fit, durability and performance.
Product Features:
See More
Product Features:
- OE-Equivalent electric fuel pump
- Direct fit for easy installation
- OE connections and fittings
- Highly efficient turbine design
- Designed for quieter operation
Delphi – Fuel Pump and Strainer Set: With Seal, Clamps, Terminals, Sleeve, Gasket, Check Valves, Hard Tubes (Part No.FE0285)
from
$118.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
Product Features:
See More
Product Features:
- Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
- Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
- Improved pump performance as a result of Delphi’s innovative design and durability
- Restores fast pressure performance and system integrity, translating to better pumping through less energy
- Part is validated, tested and matched to the right vehicle application
- When servicing the fuel system, always check the fuel filter for possible replacement
- Always be sure to check and clean fuel tank to avoid unnecessary returns
- Always replace the fuel strainer when doing a fuel pump repair
Carquest Premium – Fuel Pump Module Assembly: Fuel Pump, Sending Unit and Strainer (Part No.M260334)
from
$155.99
Carquest Premium fuel pump modules and assemblies are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. We have invested in industry-leading quality improvements like upgraded turbine impellers and 100% carbon commutators to deliver greater reliability. Carquest Premium fuel pump modules are supplied with the pump strainer and gaskets or seals when required for the application. Carquest Premium fuel pump modules are engineered with superior quality components to provide the longest life and reliable performance.
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications for fit, form and function
- 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
- OE upgraded turbine impellers greatly reduce fuel pulsation
- All fuel pumps are 100% performance tested
- Includes installation gaskets or seals where applicable
Carquest Premium – Mechanical Fuel Pump 1496437: Includes Gasket (Part No.1496437)
from
$30.99
Carquest Premium mechanical fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Every mechanical fuel pump is 100% tested throughout the entire manufacturing process for worry-free performance. Carquest Premium mechanical fuel pumps include the installation gaskets needed for each application. Carquest Premium mechanical fuel pumps are engineered with superior quality components to provide the longest life and reliable performance
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications for fit, form and function
- Special heat-treated rocker arms and case-hardened pins to ensure lasting performance
- All fuel pumps are 100% performance tested
- Includes installation gaskets or seals where applicable
Delphi – Fuel Pump Module Assembly: With Float Arm, Seals (Part No.FG0425)
from
$235.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
Product Features:
See More
Product Features:
- Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
- Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
- Lower amperage draws less load on vehicle’s electrical system
- Part is validated, tested and matched to the right vehicle application
- Always be sure to check and clean fuel tank to avoid unnecessary returns
- Lower failure rates due to its innovative design and durability
Felpro – Fuel Pump Mounting Gasket (Part No.6579)
from
$2.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Popular 1956 Chrysler Town & Country Fuel and Emissions Systems Categories
1956 Chrysler Town & Country Fuel and Emissions Systems
You count on your 1956 Chrysler Town & Country to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Fuel and Emissions Systems. With 2 Fuel and Emissions Systems ranging in price from $2.99 to $64.99, you’re sure to find everything you need for your 1956 Chrysler Town & Country.
Brands matter. If you want to shop a specific Fuel and Emissions Systems brand, we stock 2 different brands like Felpro and Mr. Gasket. 1956 Chrysler Town & Country Fuel and Emissions Systems start as low as $2.99!
One of the best ways to find top quality OEM or aftermarket Fuel and Emissions Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 126 extensive product reviews on 1956 Chrysler Town & Country Fuel and Emissions Systems.
Did we mention you can order your Fuel and Emissions Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Fuel and Emissions Systems inventory for your 1956 Chrysler Town & Country below to get started!
Top-Rated Fuel and Emissions Systems Brands For Your 1956 Chrysler Town & Country
Trusted Fuel and Emissions Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1956 Chrysler Town & Country running right for years to come. In our inventory you’ll find brands like Felpro Mr. Gasket, and even more.
Popular Felpro Fuel and Emissions Systems
You’ll find popular Felpro brand products across Fuel Pumps. All are waiting to get your 1956 Chrysler Town & Country back on the road. Some of the top-rated Felpro products in these categories are:
Top-Rated Fuel and Emissions Systems
If are what you’re looking for, our inventory holds plenty. We stock brand Fuel and Emissions Systems for your 1956 Chrysler Town & Country, and some of our most reviewed parts include:
