1956 Chevrolet Two-Ten Series Valve Cover and Cylinder Heads

Essential 1956 Chevrolet Two-Ten Series Valve Cover and Cylinder Heads

ARP Auto Racing – For Use With 2004 And Later Gen Iii/ Ls Series Small Block, 200000Psi Tensile (Part No.134-3610)

For Use With 2004 And Later Gen Iii/ Ls Series Small Block, 200000Psi Tensile

from

$155.99
All Pro Series bolts are cold forged to ensure molecular integrity, heat treated prior to thread rolling and machining, and are rated at 200,000 PSI tensile strength. ARP Pro Series head bolt kits are application specific, designed for use with typically competition only components. These fasteners deliver superior strength and meet the ARP zero defect zero failure quality standard. Hardened and parallel ground washers are included with each kit to ensure even load distribution and accurate torque readings. All Pro Series head bolts have a reduced wrenching hex or 12 point head and wide area flange to eliminate the need for valve train removal for cylinder head retorquing and permits the use of larger diameter valve springs. Most applications have undercut short bolts that can help eliminate head gasket failures through providing more stretch to compensate for the additional compression of gaskets.

Product Features:
  • Pro Series Bolts Are Cold Forged To Ensure Molecular Integrity, Heat Treated Prior To Thread Rolling And Machining
  • Nominally Rated At 200,000 Psi Tensile Strength
  • These Fasteners Deliver Superior Strength And Meet The ARP Zero Defect Zero Failure Quality Standard
  • Bolts Have A Reduced Wrenching Hex Or 12 Point Head And Wide Area Flange To Eliminate The Need For Valve Train Removal For Cylinder Head Retorquing And Permits The Use Of Larger Diameter Valve Springs
See More

Mr. Gasket – Chrome Valve Cover Wing Bolts (Part No.9824)

Chrome Valve Cover Wing Bolts

from

$15.99
Chrome-plated for beauty and durability, wing bolts make valve cover removal fast & easy. They are precision-engineered and feature extra-long threads to accommodate Mr. Gasket re-usable valve cover gasket & custom valve covers.

Product Features:
  • Fits Chevy V8
  • Standard Y Top 1/4 In-20 X 5/8 in L
  • Chrome Plated Steel
  • Overall Length: 4.64″
  • Installed Length: 4.00″
  • Pack of 4
See More

Sealed Power – Engine Valve Lifter (Part No.HT-817)

Engine Valve Lifter

from

$13.99
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:
  • Unsurpassed quality that you can trust
  • Uses leading edge materials
  • State-of-the-art manufacturing
  • Exacting tolerances
  • Meets or exceeds OEM specifications
See More

Dorman – Rubber Expansion Plug 1-1/2 In. – Size Range 1-1/2 In. – 1-5/8 In. (sold by each) (Part No.570-009)

Rubber Expansion Plug 1-1/2 In. - Size Range 1-1/2 In. - 1-5/8 In. (sold by each)

from

$8.49
This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Edelbrock – Valve Seat for S/B Chevy heads with 1.60" Valves (Part No.9710)

Valve Seat for S/B Chevy heads with 1.60" Valves

from

$18.99
Product Features:
  • Valve Seats
  • Performer Series
  • 50-State Street Legal
See More

Edelbrock – Small-Block Chevy E-Series Cylinder Head E-210 Flat Tappet Camshaft (Part No.5085)

Small-Block Chevy E-Series Cylinder Head E-210 Flat Tappet Camshaft

from

$1575.99
The Edelbrock #5085 E-210 Cylinder heads are designed for use with 1955-1986 Small-Block Chevy applications. The Edelbrock E-Series cylinder heads are a step up in affordable performance from our E-Street line. They feature larger runners for increased ai

Product Features:
  • Complete Pair For Hydraulic Flat Tappet
  • 64cc Combustion Chamber Volume
  • 210cc Intake/75cc Exhaust Runner Volume
  • 2.08 in. Intake/1.6 in. Exhaust Valve Diameter
  • 0.562 in. Deck Thickness
See More

ARP Auto Racing – ARP Cylinder Head Stud Kit (Part No.234-4301)

ARP Cylinder Head Stud Kit

from

$316.99
ARP only uses premium grade 8740 alloy and a proprietary ARP2000 alloy that are rated for superior to “aircraft” quality alloy steels. Secondly, each stud is placed vertically into special racks and precisely heat-treated to 200,000 psi for the 8740 material and 220,000 psi for the ARP2000 material. This procedure ensures complete heat penetration and the results are far superior to those lesser quality studs from other manufacturers who just dump pieces in a basket and hope for the best. 

Product Features:
  • 1/2″ 12-Point, 3/16″ Allen Socket Size(s)
  • 8740 Chromoly
  • Black Oxide
  • Small Block Chevy
  • Sold As A Kit
See More

Edelbrock – Hold-Down Tab Kits for Small-Block Chevy (Qty 4) (Part No.4404)

Hold-Down Tab Kits for Small-Block Chevy (Qty 4)

from

$20.99
Product Features:
  • Not For Center Bolt Covers
  • Steel Material
  • For Small-Block Chevy
  • Chrome Finish
  • Set of 4
See More

Sealed Power – Push Rod (Part No.RP-3212R 100)

Push Rod

from

$9.49
Speed-Pro delivers the power you need and the value and quality that you deserve. Whether you are running at the track, chasing trophies on the strip, or just cruising down the road, count on Speed-Pro to provide the best value in HP engine components

Product Features:
  • Professional racing rods
  • 1-Piece forged end rods
  • Hardened for guide plate compatibility
  • Centerless ground to guarantee concentricity
  • Black oxide coated for corrosion protection
  • Part numbers are laser etched on each pushrod for positive ID
See More

Sealed Power – Engine Push Rod (Part No.RP-3093)

Engine Push Rod

from

$2.99
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:
  • State-of-the-art manufacturing
  • Exceptional material quality
  • Exacting tolerances
  • Heat treated tips
  • Stock or mild modified replacement
  • Made in USA
See More

Mr. Gasket – Valve Cover (Part No.9800)

Valve Cover

from

$64.19
Made of chrome plated steel. Smooth top with original equipment height and internal baffle. Features one breather/oil filler cap opening per valve cover. Hardware and gaskets sold separately.

Product Features:
  • Fits 1960-1986 Chevy 262-400 Small Block
  • OEM height, short-style covers
  • Chrome plated steel construction
  • Perimeter style bolt pattern
  • Features 1 breather/oil fill cap opening per valve cover
  • Sold as a pair
See More

Felpro – Cylinder Head Gasket Set (Part No.HS 7733 PT-2)

Cylinder Head Gasket Set

from

$35.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Head sets contain gaskets and seals necessary for a valve grind or head reconditioning job
  • Application specific design to ensure a perfect fit and premium seal
  • Premium quality parts you can trust
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Contains all the parts needed to complete the repair unless otherwise noted
See More

Felpro – Cylinder Head Gasket Set (Part No.HS 7619 B-1)

Cylinder Head Gasket Set

from

$34.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Engineered and manufactured specifically for the repair environment
  • Contains all the parts needed to complete the repair unless otherwise noted
See More

Sealed Power – Engine Valve Spring Retainer Keeper (Part No.VK-115)

Engine Valve Spring Retainer Keeper

from

$0.43
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:
  • Unsurpassed quality that you can trust
  • Uses leading edge materials
  • State-of-the-art manufacturing
  • Exacting tolerances
  • Meets or exceeds OEM specifications
See More

Sealed Power – Engine Rocker Arm Ball (Part No.MR-1783)

Engine Rocker Arm Ball

from

$0.65
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
See More

Mr. Gasket – Cylinder Head Dowel Pins (Part No.4375)

Cylinder Head Dowel Pins

from

$14.99
Dowel pins are precision machined and case hardened for accurate head alignment. Two per set. 5/16 inch x 5/8 inch

Product Features:
  • Precision Machined
  • Case Hardened
  • Give Accurate Alignment
  • 2 Per Set
See More

Mr. Gasket – Ultra Seal: Competition Screw-In Rocker Arm Studs (Part No.1075)

Ultra Seal: Competition Screw-In Rocker Arm Studs

from

$94.99
Mr. Gasket competition screw-in rocker arm studs are manufactured from heat treated black oxide coated Grade 8 steel. Ideal for high performance street and race applications.

Product Features:
  • Black Oxide Coated Grade 8 Steel
  • Kit Contains 16 Studs
  • Easy To Install
  • Heat Treated Steel
  • Prevents Stud Flexing
  • Black Plated Finish
See More

ARP Auto Racing – ARP Rocker Arm Stud Kit (Part No.234-7201)

ARP Rocker Arm Stud Kit

from

$99.99
ARP rocker studs are concentric within .005″, extra-large radius base offers greater resistance to flex. Note: To be used ONLY with ARP’s patented Perma-Loc adjusters. Made of 8740 chrome moly forgings and heat-treated to 180,000 PSI. Tip ground flush for optimum adjuster seating.

Product Features:
  • 7/16″-14 Thread Size(s)
  • .700″ Thread Length
  • 8740 Chromoly
  • 1.75″ Effective Stud Length
  • Set of 16
  • .800″ Adjuster Thread Depth
  • 3/8″-24 Shank Diameter and Thread
  • 3/8″ Typical Small Block Application
  • Black Oxide
See More

ARP Auto Racing – 1.75"Oal Stud, 0.8"D Adjuster Third, 3/8"-24, 7/16"-14, 0.7"D Screw-In, Set Of 16 (Part No.134-7101)

1.75"Oal Stud, 0.8"D Adjuster Third, 3/8"-24, 7/16"-14, 0.7"D Screw-In, Set Of 16

from

$59.99
If you have ever installed a rocker stud into a cylinder head and watched it wobble as it screwed in, you knew from the beginning that the rocker geometry was going to be inconsistent all over the place. ARP rocker studs are concentric within 0.005 T.I.R. thread pitch to thread pitch. They run in straight and true. Lengths are exact designed to provide positive seating every time. An extra large radius base offers greater resistance to flex. Available in both High Performance and Pro Series models. To be used with ARP patented Perma Loc(TM) adjusters.

Product Features:
  • Made Of 8740 Chrome Moly Forgings
  • Heat Treated To 180,000 PSI
  • Excellent For Elapsed Time Bracket Racing, Limited Rule Oval Track Competition And Street Use
  • Lengths Are Exact Designed To Provide Positive Seating Every Time
  • Set of 16
  • .800″ Adjuster Thread Length
  • 3/8-24 Shank Diameter and Thread
  • 3/8″ Typical Small Block Application
See More

Sealed Power – Engine Rocker Arm Kit (Part No.R-826)

Engine Rocker Arm Kit

from

$3.49
Sealed Power parts provide innovative designs, use leading-edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:
  • Complete rocker arm assembly
  • 1 Arm
  • 1 Ball
  • 1 Nut
  • Utilizes ISO & QS certified manufacturing
See More

Felpro – Cylinder Head Gasket: Composite, Without Head Bolts (Part No.7733 PT-2)

Cylinder Head Gasket: Composite, Without Head Bolts

from

$34.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • PROPRIETARY COATING — Nonstick anti-friction coating seals small surface scratches and imperfections
  • SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
  • NO RETORQUE DESIGN — Steel core helps eliminate the need for retorquing head bolts
  • STRONG AND DURABLE — Features graphite or reinforced fiber facing material and steel armor for strength and durability
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
See More

Mr. Gasket – Head Gasket (Part No.1134G)

Head Gasket

from

$60.29
Mr. Gasket Ultra-Seal Head Gaskets are a five layer (graphite core/perforated steel outer layers) composite construction. The graphite core has excellent thermoconductivity (transfers heat) away from hot spots in head preventing gasket burn-out. They provide excellent stability, compressibility and high temperature endurance. A high temperature silicone coating ensures sealing of engine fluids. Compatible with cast iron or aluminum heads, they will not brinell (indent) aluminum cylinder heads. Suitable for high performance street, drag race and oval track use. Sold individually.brbrGasket bore 4.100 inch, Compressed thickness 0.028 inch

Product Features:
  • Five layer (graphite core/perforated steel outer layers) composite construction
  • Graphite core is excellent transfering heat away from hot spots in head preventing gasket burn-out.
  • Provides excellent stability, compressibility and high temperature endurance
  • Coated with high temperature silicone to ensure sealing of engine fluids
  • Will not brinell (indent) aluminum cylinder heads
  • For high performance street, drag race and oval track use
See More

Mr. Gasket – Mls Head Gasket (Part No.3130G)

Mls Head Gasket

from

$111.99
Our unique Multi-Layered steel head gasket embossment formation process optimizes the embossment radius, reduces stress points, enhances gasket conformability, and provides uniform clamp load distribution. This all results in superior surface contact between block and cylinder head. All head gasket layers/spacers go through an additional process to significantly reduce forming induced stress. Advantages are reduced brittleness in material, increased flexibility and deformation retention. This stabilizes the gasket, resulting in reduced cylinder bore distortion and improved combustion seal fro the extreme cylinder pressures found in high compression, supercharged and turbocharged applications. A proprietary polymer coating ensures the micro-seal of engine coolant and oil fluids.brbrA typical MLS head gasket requires a smoother (30Ra) surface finish than composite head gaskets. Mr. Gasket’s proprietary polymer coating will seal a surface finish twice as rough (60Ra) as a typical MLS head gasket. For high performance street, drag race and oval track use.

Product Features:
  • Gasket bore – 4.060″ Thickness – .040″
  • Manufactured from 3-layer premium grade stainless steel and state of the art laser cutting
  • Optimized sealing embossments seals extreme cylinder pressure
  • Provides excellent stability and reduces cylinder bore distortion.
  • Proprietary polymer coating ensures the micro seal of engine coolant and oil fluids.
  • Ideal for supercharged, turbocharged, nitrous oxide and extreme compression ratio engines
  • For high-performance street, drag race and oval track use
See More

Felpro – Cylinder Head Gasket: Composite, Without Head Bolts (Part No.501 SD)

Cylinder Head Gasket: Composite, Without Head Bolts

from

$41.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR THE TOUGHEST CONDITIONS — Engineered for hardworking vehicles that operate in severe conditions
  • STRONG AND DURABLE — Severe duty steel core gaskets designed slightly thicker to accommodate for machined surfaces
  • PREMIUM MATERIALS — High-grade stainless armor enhances strength and corrosion resistance while proprietary coatings enhance sealing and anti-stick properties
  • SUPERIOR SEAL — Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
See More

Sealed Power – Engine Rocker Arm Nut (Part No.MR-1751)

Engine Rocker Arm Nut

from

$0.95
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
See More

1956 Chevrolet Two-Ten Series Valve Cover and Cylinder Heads

Maybe you’re in the middle of a full rebuild of that 1956 Chevrolet Two-Ten Series. Maybe you just need a couple of Valve Cover and Cylinder Heads. Either way, Advance Auto Parts has 42 different Valve Cover and Cylinder Heads in our inventory ranging from $0.43 to $1,575.99. That means you can find the exact parts or products you need to keep that 1956 Chevrolet Two-Ten Series running smoothly.

Valve Cover and Cylinder Heads are only as good as their brand. We stock 7 different brands to make sure you have plenty of trusted parts to choose from for your 1956 Chevrolet Two-Ten Series. Sealed Power, Felpro, and Mr. Gasket are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Valve Cover and Cylinder Heads for your 1956 Chevrolet Two-Ten Series, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 192 reviews in this category, some of the top rated parts include Chrome Valve Cover Wing Bolts with 4.4 stars and Engine Rocker Arm Kit with 3.8 stars.

So if you’re in the market for aftermarket Valve Cover and Cylinder Heads to keep your 1956 Chevrolet Two-Ten Series rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Valve Cover and Cylinder Heads Brands To Make Your 1956 Chevrolet Two-Ten Series Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1956 Chevrolet Two-Ten Series demands trusted brand parts and products to keep it running. Many trusted brands of Valve Cover and Cylinder Heads make up Advance Auto Parts’ inventory, and all are ready to help make your Two-Ten Series the best it can be. Be sure to browse some of our top Valve Cover and Cylinder Heads brands and parts.

Top 1956 Chevrolet Two-Ten Series Valve Cover and Cylinder Heads from Felpro

Felpro products are another trusted brand when it comes to Valve Cover and Cylinder Heads for your 1956 Chevrolet Two-Ten Series. Popular Felpro parts include:
Engine Cylinder Head Bolt Set
from $31.99
(38)
Engine Cylinder Head Bolt Set
Cylinder Head Bolt Sets
Cylinder Head Gasket: Composite, Without Head Bolts
from $34.99
(12)
Cylinder Head Gasket: Composite, Without Head Bolts
Cylinder Head Gaskets

FAQs for 1956 Chevrolet Two-Ten Series Valve Cover and Cylinder Heads

What are the most purchased Valve Cover and Cylinder Heads for the 1956 Chevrolet Two-Ten Series?

Out of 42 Valve Cover and Cylinder Heads for the 1956 Chevrolet Two-Ten Series, the most popular in our inventory are:
Engine Valve Lifter
from $13.99
(15)
Engine Valve Lifter
Engine Valve Lifters
Engine Push Rod
from $2.99
(5)
Engine Push Rod
Push Rods
Engine Rocker Arm Nut
from $0.95
(4)
Engine Rocker Arm Nut
Rocker Arm Nuts

What are the top-rated 1956 Chevrolet Two-Ten Series Valve Cover and Cylinder Heads?

Top-rated Valve Cover and Cylinder Heads for your 1956 Chevrolet Two-Ten Series based on customer reviews/ratings are:
Chrome Valve Cover Wing Bolts
from $15.99
(9)
Chrome Valve Cover Wing Bolts
“good”
Engine Rocker Arm Kit
from $3.49
(6)
Engine Rocker Arm Kit
“The rocker was what i needed and was hard to find. You guys helped out well and were right in the neighborhood thanks”
Engine Valve Spring Retainer Keeper
from $0.43
(2)
Engine Valve Spring Retainer Keeper
“I would purchase again”