1955 Lincoln Capri Ignition and Tune-Up Products
Find Your Specific 1955 Lincoln Capri Ignition and Tune-Up Products
Below you will find various in-demand Lincoln Ignition and Tune-Up Products, components and accessories for your 1955 Capri. Advance Auto Parts has popular Capri parts like Ignition Kits, Spark Plugs, Ignition Wires and more. You’ll also find aftermarket and OEM Ignition and Tune-Up Products for other Capri model years including
1952,
1953,
1954,
1956,
1957,
1958,
1959 and more. Select a category of 1955 Lincoln Capri Ignition and Tune-Up Products below and start saving instantly.
Popular 1955 Lincoln Capri Ignition and Tune-Up Products Categories
Essential Ignition and Tune-Up Products for 1955 Lincoln Capris
Carquest Premium – Ignition Coil (Part No.EBC1521)
from
$31.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Built by IATF 16949 certified manufacturers for consistent durability
- Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
- Segmented secondary bobbins to distribute high voltage and prevent shorting
- 100% end-of-line tested to ensure proper performance
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
Edelbrock – Ignition Coil No. 22739 12V Cannister Style, 1.4 Ohm Primary Resistance (Part No.22739)
from
$46.99
Edelbrock Ignition Coil No. 22739 is a universal 12-volt cannister-style coil designed as a high-quality direct bolt-on replacement for OEM ignition coils. This advanced coil has a primary resistance of 1.4 ohms with an output of 42,000 volts. Internally, each Edelbrock Coil features heavy-duty primary and secondary windings for higher energy and greater spark that can help to provide quicker starts with improved idle quality. With a durable oil-filled housing, Edelbrock Coils are resistant to heat, shock and vibration with an effective operating range of 0 to 6,500 RPM.
Product Features:
See More
Product Features:
- output of 42000V
Mallory – Universal Street Performance Ignition Coil (Part No.29219)
from
$83.99
Universal, 12-volt coil features an oil-filled design and arc resistant alkyd top for superior performance, insulation and cooling. The internal design of this coil eliminates the need for a separate ballast resistor. This coil is specifically designed to deliver optimum performance when used with: Mallory UNILITE or magnetic breaker less ignitions Mallory HYFIRE IV electronic ignition controls, and Mallory electronic ignition conversion kits.
Product Features:
See More
Product Features:
- 12 Volt Coil
- Oil-Filled Design
- Arch Resistant Alkyd Top
- Designed To Deliver Optimum Performance
PerTronix – 808415 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 115 Degree Red (Part No.808415)
from
$88.99
Most modern electronic ignition systems require suppression style wires to preserve sensitive components. Flame-Thrower 8mm Custom fit MAGx2 wires provide enhanced RFI suppression and dual current paths for more power delivered to the spark plug. Our custom wire sets have factory terminated ends for a superior connection and perfect fit, without cutting, crimping and splicing.
Product Features:
See More
Product Features:
- Two current paths for reliability and redundancy. -Primary path: Spiral wound stainless steel alloy.-Secondary path: Carbon impregnated fiberglass center core.
- Low 500 ohm per foot resistance.
- 8mm Silicone jacket to resist high temperatures, moisture, oil and chemicals.
- EPDM (Ethylene Propylene Diene Methylene) inner insulation for superior heat resistance and prevention of arcing and voltage leaks.
- Fiberglass reinforcing braid for added strength and flexibility.
Mallory – Mallory Prosidewinder 90F Univ. Wire Set (Part No.937)
from
$133.99
Features at a glance, low 300 Ohm resistance spiral core delivers high energy output for maximum spark at the plug. Great RFI suppression meets the demands of today’s on-board electronics, such as electronic ignition, sound systems, and computer controls. 8MM ozone-resistant red silicone jacket repels water, oil, grease, and fuel, and withstands temperatures up to 500 degrees. Fits V8, universal wire kit: includes 45 degree spark plug boots, female socket (standard) distributor boots and terminals.
Product Features:
See More
Product Features:
- Most Advanced Wire By Mallory
- RFI Suppression
- High Temperature Silicone Jacket
- Withstands Over 500+F
- Come In Ready To Use Kits
- Extra Long Kits
Mallory – Mallory Prosidewinder 135F Univ/Wire Set (Part No.947)
from
$153.99
Features at a glance, low 300 Ohm resistance spiral core delivers high energy output for maximum spark at the plug. Great RFI suppression meets the demands of today’s on-board electronics, such as electronic ignition, sound systems, and computer controls. 8MM ozone-resistant red silicone jacket repels water, oil, grease, and fuel, and withstands temperatures up to 500 degrees. Fits V8, universal wire kit: includes 45 degree spark plug boots, female socket (standard) distributor boots and terminals.
Product Features:
See More
Product Features:
- Most Advanced Wire By Mallory
- RFI Suppression
- High Temperature Silicone Jacket
- Withstands Over 500+F
- Come In Ready To Use Kits
- Extra Long Kits
ACDelco – Copper Core Spark Plug: Reliable Performance & Durability (Part No.R85TS)
from
$3.99
ACDelco Gold (Professional) Conventional Spark Plugs are a high quality alternative to Original Equipment (OE) parts. These Conventional Spark Plugs are designed for reliability and efficient performance, and are the high quality replacements for many vehicles on the road today. Their high-quality copper cores and outstanding suppression characteristics deliver reliable performance. They are also available for Marine applications. These premium aftermarket replacement spark plugs are manufactured to meet your expectations for fit, form, and function. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional.
Product Features:
See More
Product Features:
- Black Onyx coating helps reduce corrosion
- Copper core provides great heat transfer and helps maximize plug durability
- Ribbed suppressor seal extends resistance and helps prevent spark ‘flash over’ and misfires
- Nickel-chrome alloy sheathing helps prevent corrosion on center electrode
- Available for use in Marine applications
- Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
- Premium aftermarket replacement part
- Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
Motorcraft – Standard Spark Plug: Excellent Heat Dissipation & Durability (Part No.SP-431)
from
$2.79
The Standard Spark Plug by Motorcraft is the same high-quality part installed when your engine first rolled off the assembly line, ensuring a perfect fit and optimal performance. Designed with a 30,000-mile service interval, it features a copper core electrode and a nickel chromium alloy side electrode, providing exceptional heat dissipation and long-lasting durability. The built-in resistor minimizes radio frequency interference (RFI) while reducing electrode erosion, ensuring consistent performance over time. Its copper-glass seal securely bonds the insulator and terminal post center electrode, delivering the full required voltage at the spark gap while maintaining a gas-tight seal. With a tapered seat type for precise installation, this spark plug is engineered to meet the high standards set by Ford Motor Company, making it a reliable choice for maintaining your vehicle’s performance.
Product Features:
See More
Product Features:
- Same part installed when the engine rolled off the assembly line
- 30,000-mile service interval
- Copper core electrode and nickel chromium alloy side electrode for excellent heat dissipation and durability.
- Resistor reduces radio frequency interference (RFI) and electrode erosion
- Copper-glass seal bonds insulator and terminal post center electrode together to ensure full required voltage at spark gap and a gas-tight seal
NGK – Iridium IX Spark Plug (WR5IX): Extreme Ignitability & Durability (Part No.7510)
from
$12.49
NGK Iridium IX spark plugs are specifically designed for the performance enthusiast. Iridium IX provides outstanding acceleration, high fuel efficiency and durability. NGK Iridium IX plugs offer extreme ignitability and exceptional anti-fouling. Tapered cut ground electrode provides improved starting, idling and throttle response. The Iridium fine wire center electrode’s durability is six times harder than platinum. Iridium alloy’s extremely high melting point is perfect for today’s engines. For even greater performance consider upgrading to an NGK Ruthenium HX plug.
Product Features:
See More
Product Features:
- SINGLE IRIDIUM TIP: Fine wire 0.6 millimeter iridium tip center electrode ensures high durability and a consistently stable spark
- IRIDIUM ALLOY CENTER ELECTRODE: Iridium’s density (6x that of platinum) and extremely high melting point is perfect for modern high efficiency engines
- TAPERED CUT GROUND ELECTRODE: Reduced quenching design produces outstanding ignitability, improved acceleration, fuel efficiency and durability
- SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
- TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
- RECOMMENDED USAGE: Modified or high performance applications, or as an upgrade to OE nickel alloy spark plugs
- Outstanding Acceleration and High Fuel Efficiency: NGK Iridium IX spark plugs are engineered to deliver superior acceleration and enhance fuel efficiency, making them ideal for performance enthusiasts.
- Extreme Ignitability and Anti-Fouling: These spark plugs offer exceptional ignitability and anti-fouling properties, ensuring reliable performance and longevity.
Dorman – Help – Spark Plug Non-Foulers – 18mm Tapered Seat (Part No.42002)
from
$10.99
This spark plug non fouler is designed for easy installation on specified vehicles to protect spark plugs from fouling and damage. It is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spark plug non fouler is designed for easy installation to protect spark plugs from fouling and damage on specified vehicles
- Ideal solution – this non-fouler preserves spark plug life and is a reliable replacement for an original non-fouler that has failed due to corrosion
- Durable construction – made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Driveworks – Contact Set (Points) (Part No.12002)
from
$8.05
Driveworks offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.
Product Features:
See More
Product Features:
- Direct-fit OE replacement ensures ease of installation
- Designed to meet OE performance
- As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
- As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
Carquest Premium – Ignition Condenser (Part No.GAA1251)
from
$9.99
An Ignition Capacitor is a device that will absorb excessive voltage spikes in electrical systems. The typical location or use for a capacitor is inside a distributor tied into a point ignition system. The ignition capacitor may also be called a radio capacitor or condenser used in electrical devices which may be susceptible to voltage spikes.
Product Features:
See More
Product Features:
- Application matched component to ensure the system can be returned to like new condition.
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Accel – Contact Set Hp 32 Oz (Part No.110228)
from
$52.99
Heavy duty points sets are quipped with extra think contack arms to prevent flexing at high RPMS. Large radiused tungsten contants provide crisp circuit breaking for peak coil output. High strength phenolic rubbing blocks provide superior durability when used with heavy duty spring tension.
Product Features:
See More
Product Features:
- Extra Thick Contact Arms
- Large Radius Tungsten Contacts
- High Strength Phenolic Rubbing Blocks
- Prevents Points Float
- Moisture-Proof Buna-N Condenser
Carquest Premium – Ignition Conversion Kit (Part No.CBA1062)
from
$204.99
The Ignition Conversion Kit allows point type ignition systems to be converted to an electronic ignition type system. These universal kits are designed to fit directly into the current distributor with little modification required.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the manufacturer.
PerTronix – Ignitor for Ford 8 Cylinder Engines – Increased Power & Fuel Economy (Part No.1281)
from
$125.99
For over thirty years, the Ignitor has proven itself in applications ranging from race cars to tractors. The Ignitor replaces breaker points and troublesome factory electronic ignitions with a dependable, self contained and maintenance free electronic ignition.
Product Features:
See More
Product Features:
- PerTronix 1281 Ignitor Ford 8 cyl
- Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
PerTronix – 1282 Ignitor Ford 1954-56 8 cyl (Part No.1282)
from
$151.99
The original Ignitor module is ideal for restorations. Ignitor Module Kits are extremely easy to install and fit into your original distributor to maintain your stock look. No additional ignition box is required keeping a clean look under the hood. Ignitors are available for most distributors that came with mechanical breaker points and will cover AUTOMOTIVE, MARINE, INDUSTRIAL and AGRICULTURE applications.
Product Features:
See More
Product Features:
- Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
- 2:1 improvement over “points” in current fall time for increased coil output.
- Rotating cobalt magnets trigger a Hall Effect integrated circuit; no points to burn; no moving parts to wear out.
- Epoxy molding makes our module impervious to dirt, oil, grease and moisture.
- Stable timing; no need for any adjustments.
- Pair with a Flame Thrower Canister Coil for optimal performance
- Legal in all 50 states and Canada (C.A.R.B. E.O. No. D-57-22)
PerTronix – 12823 Magnet Sleeve (only) for 1282 Ignitor Kit (Part No.12823)
from
$55.99
For over thirty years, the Ignitor has proven itself in applications ranging from race cars to tractors. The Ignitor replaces breaker points and troublesome factory electronic ignitions.
Product Features:
See More
Product Features:
- PerTronix 12823 Magnet Sleeve (only) for 1282 Ignitor Kit
- Replacement Parts (only) for Ignitor and Ignitor II Kits
Carquest Premium – Distributor Cap (Part No.CAC1056)
from
$16.99
The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.
Product Features:
See More
Product Features:
- All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
- Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
- Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
- Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.
Carquest – Distributor Cap (Part No.24C1021)
from
$13.99
The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine¿s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.
Product Features:
See More
Product Features:
- All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
- Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
- Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
- Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.
MSD Ignition – Cap/Rotor Kit; Street Fire; Ford V8; Socket (Part No.5506)
from
$52.99
All of the Street Fire components are spec’d by MSD engineers and designed to provide performance for the price. The quality of each part is backed up with a one year warranty!
Product Features:
See More
Product Features:
- Supplied w/Heavy Duty Rotor
- Low Resistance Terminals
- Full Power Output At High RPM
- Perfect For Budget Minded Enthusiasts
Carquest Premium – Distributor Cap (Part No.CAC1087)
from
$21.99
The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.
Product Features:
See More
Product Features:
- All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
- Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
- Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
- Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.
Carquest – Distributor Rotor (Part No.D198)
from
$9.99
BWD SELECT designs, specifies, and manufactures replacement parts with one goal in mind-make them the very best. To maximize performance and longevity, we use the finest materials and improve on OE specifications, whenever possible.
Product Features:
See More
Product Features:
- High-quality direct replacement electrical connector allows you to replace only the damaged connector instead of the entire harness for a cost-effective repair
- The terminal is manufactured with high grade materials such as copper alloy, brass, and phosphor bronze. The housing is fabricated using polyamide resins. All of the materials together provide the connectors with prolonged life and superior performance.
- All electrical connectors are 100% tested for proper mechanical and electrical fit, form and function
- Offering thousands of high-quality pigtails & sockets for nearly every electrical job
Carquest Premium – Distributor Rotor (Part No.DAA1002)
from
$5.99
The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.
Product Features:
See More
Product Features:
- All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
- Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
- Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
- Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.
Driveworks – Distributor Rotor (Part No.23050)
from
$4.05
Driveworks offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.
Product Features:
See More
Product Features:
- Direct-fit OE replacement ensures ease of installation
- Designed to meet OE performance
- As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
- As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
Carquest Premium – Distributor Rotor (Part No.DAA1009)
from
$13.99
The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.
Product Features:
See More
Product Features:
- All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
- Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
- Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
- Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.
Carquest – Distributor Rotor (Part No.23A1015)
from
$4.99
The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine¿s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.
Product Features:
See More
Product Features:
- All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
- Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
- Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
- Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.
Upgrade your 1955 Lincoln Capri with Top-Quality Ignition and Tune-Up Products
When it comes to maintaining or upgrading your 1955 Lincoln Capri, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Lincoln or enhancing its overall performance, Ignition and Tune-Up Products are key to keeping your Capri functioning at its best. At Advance Auto Parts, we offer a wide selection of 24 Ignition and Tune-Up Products for the 1955 Lincoln Capri, designed to meet your needs without breaking the bank.
From
Ignition Kit
replacements to
Spark Plugs
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Ignition and Tune-Up Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Ignition and Tune-Up Products for your 1955 Lincoln Capri at great prices.
Our Ignition and Tune-Up Products inventory for this model
ranges from just $1.29 to $388.99, with
an average price of $64.79.
Our 24 Ignition and Tune-Up Products in stock come from 9 trusted brands, so you’re sure to find the right part for your 1955 Lincoln Capri without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1955 Lincoln Capri, we stock popular OEM and aftermarket Ignition and Tune-Up Products from top names
like Mallory, NGK, Autolite, and more.
Mallory Ignition and Tune-Up Products
start at just $133.99 and boast an impressive 4.9 stars average rating from customers.
NGK and Autolite also bring quality to the table, with Ignition and Tune-Up Products available starting at $4.29, and at an average 4.8 stars rating.
With 27 customer reviews and counting, our 1955 Lincoln Capri Ignition and Tune-Up Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Ignition and Tune-Up Product upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals
and more to make sure your 1955 Lincoln Capri is always ready to roll. We’re committed to providing you with everything you need to keep your Capri in top shape, all in one place.
Start shopping confidently below for your 1955 Lincoln Capri!
Best-Selling Ignition Kits for 1955 Lincoln Capris
Enhance the driving experience in your Lincoln with 6 quality Ignition Kit components, starting at $12.99.
Carquest Premium – Ignition Condenser (Part No.GAA1037)
from
$12.99
An Ignition Capacitor is a device that will absorb excessive voltage spikes in electrical systems. The typical location or use for a capacitor is inside a distributor tied into a point ignition system. The ignition capacitor may also be called a radio capacitor or condenser used in electrical devices which may be susceptible to voltage spikes.
Product Features:
See More
Product Features:
- Application matched component to ensure the system can be returned to like new condition.
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Carquest Premium – Ignition Contact Set (Part No.AKA1008)
from
$13.49
The Ignition Contact Set is used in older vehicle applications to ground the ignition coil primary circuit and create the high secondary voltage required in the ignition process. Connected to the contact set is a condenser designed to absorb the high voltage spike created when the contact set opens.
Product Features:
See More
Product Features:
- Application matched component to ensure the system can be returned to like new condition.
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
PerTronix – 1282P6 Ignitor Ford 1954-56 8 cyl 6 Volt Positive Ground (Part No.1282P6)
from
$168.99
The original Ignitor module is ideal for restorations. Ignitor Module Kits are extremely easy to install and fit into your original distributor to maintain your stock look. No additional ignition box is required keeping a clean look under the hood. Ignitors are available for most distributors that came with mechanical breaker points and will cover AUTOMOTIVE, MARINE, INDUSTRIAL and AGRICULTURE applications.
Product Features:
See More
Product Features:
- Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
- 2:1 improvement over “points” in current fall time for increased coil output.
- Rotating cobalt magnets trigger a Hall Effect integrated circuit; no points to burn; no moving parts to wear out.
- Epoxy molding makes our module impervious to dirt, oil, grease and moisture.
- Stable timing; no need for any adjustments.
- Pair with a Flame Thrower Canister Coil for optimal performance
- Legal in all 50 states and Canada (C.A.R.B. E.O. No. D-57-22)
PerTronix – 1282 Ignitor Ford 1954-56 8 cyl (Part No.1282)
from
$151.99
The original Ignitor module is ideal for restorations. Ignitor Module Kits are extremely easy to install and fit into your original distributor to maintain your stock look. No additional ignition box is required keeping a clean look under the hood. Ignitors are available for most distributors that came with mechanical breaker points and will cover AUTOMOTIVE, MARINE, INDUSTRIAL and AGRICULTURE applications.
Product Features:
See More
Product Features:
- Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
- 2:1 improvement over “points” in current fall time for increased coil output.
- Rotating cobalt magnets trigger a Hall Effect integrated circuit; no points to burn; no moving parts to wear out.
- Epoxy molding makes our module impervious to dirt, oil, grease and moisture.
- Stable timing; no need for any adjustments.
- Pair with a Flame Thrower Canister Coil for optimal performance
- Legal in all 50 states and Canada (C.A.R.B. E.O. No. D-57-22)
Carquest Premium – Ignition Conversion Kit (Part No.CBA1795)
from
$388.99
The Ignition Conversion Kit allows point type ignition systems to be converted to an electronic ignition type system. These universal kits are designed to fit directly into the current distributor with little modification required.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the manufacturer.
PerTronix – 1282N6 Ignitor Ford 1954-56 8 cyl 6 Volt Negative Ground (Part No.1282N6)
from
$168.99
The original Ignitor module is ideal for restorations. Ignitor Module Kits are extremely easy to install and fit into your original distributor to maintain your stock look. No additional ignition box is required keeping a clean look under the hood. Ignitors are available for most distributors that came with mechanical breaker points and will cover AUTOMOTIVE, MARINE, INDUSTRIAL and AGRICULTURE applications.
Product Features:
See More
Product Features:
- Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
- 2:1 improvement over “points” in current fall time for increased coil output.
- Rotating cobalt magnets trigger a Hall Effect integrated circuit; no points to burn; no moving parts to wear out.
- Epoxy molding makes our module impervious to dirt, oil, grease and moisture.
- Stable timing; no need for any adjustments.
- Pair with a Flame Thrower Canister Coil for optimal performance
- Legal in all 50 states and Canada (C.A.R.B. E.O. No. D-57-22)
Most Popular 1955 Lincoln Capri Spark Plugs
Customize your Lincoln with 10 Spark Plugs products
like Spark Plugs and
Spark Plug Non-Foulers, all
priced under $12.49.
NGK – V-Power Nickel Spark Plug (WR5): Reliable Performance & Quick Starts (Part No.2438)
from
$6.99
NGK V-Power spark plugs offer reliable performance and improved ignitability over standard nickel plugs. Engineered specifically for OE applications, the special V-cut nickel alloy center electrode and concave ground electrode of NGK’s V-Power spark plug increases ignitability providing quicker starts and smoother idle. NGK’s legendary high grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance. Trivalent metal plating ensures superior anti-corrosion and anti-seizing properties.
Product Features:
See More
Product Features:
- ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction nickel alloy center electrode with V-groove provides consistent performance
- RECOMMENDED USAGE: Best for vehicles with OE nickel alloy plugs, not recommended on vehicles with factory precious metal plugs
- NGK’s OE CERAMIC TECHNOLOGY: High grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance
- SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
- COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
- TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
Autolite – Copper Resistor Spark Plug: Quick Starts & Enhanced Durability (Part No.46)
from
$4.29
Autolite Copper spark plugs are designed to deliver reliable performance, ensuring quick starts and the power your vehicle demands. Featuring a copper core center electrode, these spark plugs excel in thermal control and resist fouling, while the high nickel alloy center and ground electrodes provide extended life. The high alumina multi-rib ceramic insulator enhances thermal conductivity and insulation, offering increased strength and durability. With a nickel-plated shell, these spark plugs resist corrosion for long-lasting performance. Engineered for optimal fuel economy, they help improve mileage while delivering smooth and responsive acceleration. Compliant with Original Equipment Service (OES) design Standards, they ensure dependable operation and a secure fit with their tapered seat type. The long projection center electrode and nickel tip materials further enhance their efficiency and reliability, making them a valuable addition to your vehicle’s ignition system.
Product Features:
See More
Product Features:
- The copper core center electrode aids in thermal control and improves resistance to fouling.
- Its specially engineered high nickel alloy center and ground electrode provides extended life.
- The high alumina multi-rib ceramic insulator provides thermal conductivity and superior insulation for increased strength.
- Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended periods.
- Good Fuel Economy: Designed to optimize fuel consumption, these spark plugs help you achieve better mileage.
- Smooth Acceleration: Experience smoother and more responsive acceleration with Autolite Copper Core spark plugs.
- OES Design Compliance: These spark plugs meet or exceed Original Equipment Service (OES) design requirements, ensuring reliable performance.
- Tapered Seat Type: Featuring a tapered seat type, these spark plugs provide a secure fit and optimal performance.
Dorman – Help – Spark Plug Non-Foulers – 18mm Tapered Seat (Part No.42002)
from
$10.99
This spark plug non fouler is designed for easy installation on specified vehicles to protect spark plugs from fouling and damage. It is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spark plug non fouler is designed for easy installation to protect spark plugs from fouling and damage on specified vehicles
- Ideal solution – this non-fouler preserves spark plug life and is a reliable replacement for an original non-fouler that has failed due to corrosion
- Durable construction – made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
NGK – Iridium IX Spark Plug (WR5IX): Extreme Ignitability & Durability (Part No.7510)
from
$12.49
NGK Iridium IX spark plugs are specifically designed for the performance enthusiast. Iridium IX provides outstanding acceleration, high fuel efficiency and durability. NGK Iridium IX plugs offer extreme ignitability and exceptional anti-fouling. Tapered cut ground electrode provides improved starting, idling and throttle response. The Iridium fine wire center electrode’s durability is six times harder than platinum. Iridium alloy’s extremely high melting point is perfect for today’s engines. For even greater performance consider upgrading to an NGK Ruthenium HX plug.
Product Features:
See More
Product Features:
- SINGLE IRIDIUM TIP: Fine wire 0.6 millimeter iridium tip center electrode ensures high durability and a consistently stable spark
- IRIDIUM ALLOY CENTER ELECTRODE: Iridium’s density (6x that of platinum) and extremely high melting point is perfect for modern high efficiency engines
- TAPERED CUT GROUND ELECTRODE: Reduced quenching design produces outstanding ignitability, improved acceleration, fuel efficiency and durability
- SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
- TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
- RECOMMENDED USAGE: Modified or high performance applications, or as an upgrade to OE nickel alloy spark plugs
- Outstanding Acceleration and High Fuel Efficiency: NGK Iridium IX spark plugs are engineered to deliver superior acceleration and enhance fuel efficiency, making them ideal for performance enthusiasts.
- Extreme Ignitability and Anti-Fouling: These spark plugs offer exceptional ignitability and anti-fouling properties, ensuring reliable performance and longevity.
Autolite – Platinum Spark Plug: Enhanced Durability & Improved Performance (Part No.AP46)
from
$4.99
Autolite Platinum spark plugs are crafted for exceptional performance and durability, making them ideal for older engine applications. Featuring a platinum center electrode firing tip, these spark plugs ensure quicker firing, smoother starts, and enhanced acceleration while boosting fuel efficiency. The platinum firing tip resists gap erosion, extending the service life, while the high alumina ceramic insulator provides superior thermal conductivity and insulation for added strength. A multi-rib insulator prevents flash-over, and the nickel-plated shell offers corrosion resistance for long-lasting reliability. Designed with a tapered seat type, these spark plugs enhance performance and durability, ensuring a consistent and powerful spark. With a long projection center electrode and a performance-grade design, Autolite Platinum spark plugs deliver reliable ignition and optimal engine efficiency, making them a valuable upgrade for maintaining peak engine performance.
Product Features:
See More
Product Features:
- Engineered with a platinum firing tip that prevents gap erosion for longer service life.
- Its high alumina ceramic insulator provides thermal conductivity and superior insulation for increased strength.
- The multi-rib insulator prevents flash-over.
- Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended life.
- Tapered Seat Type: Enhances performance and durability for a longer-lasting spark plug.
Motorcraft – Standard Spark Plug (BSF82CA): Reliable Performance & Durability (Part No.SP-431-A)
from
$4.79
Standard Spark Plug (BSF82CA) delivers reliable performance and durability, making it the ideal choice for maintaining your vehicle’s original equipment standards. Engineered specifically for Ford, Lincoln, and Mercury vehicles, these spark plugs ensure an exact fit while enhancing durability, reducing misfires, optimizing emissions, and improving fuel efficiency. Resistant to oxidation and arc erosion, they are built with high-quality materials to withstand demanding conditions and provide service intervals of up to 100,000 miles. The multi-rib insulator design protects against misfires, while Motorcraft ignition components help prevent false check engine lights, giving you confidence in your vehicle’s performance. Backed by Motorcraft’s Service Parts Warranty, these spark plugs are the same trusted components found in your vehicle at the time of manufacture, ensuring reliable performance for a wide range of domestic and import cars and trucks.
Product Features:
See More
Product Features:
- Motorcraft spark plugs are matched to specific engines to provide enhanced durability, eliminate misfires, reduce fuel consumption and optimize emissions.
- Backed by Motorcraft’s Service Parts Warranty
- Exact fit for Ford, Lincoln and Mercury vehicles
- Resistant to oxidation and arc erosion.
- Multi-rib insulator protects against misfire.
- Service intervals of up to 100,000 miles.
- Motorcraft Spark Plugs are designed with high quality materials to provide reliable performance for almost any application.
- Motorcraft Spark Plugs are what was in the vehicle when it was manufactured
- Motorcraft ignition components help prevent false check engine lights.
ACDelco – Copper Core Spark Plug: Reliable Performance & Durability (Part No.R85TS)
from
$3.99
ACDelco Gold (Professional) Conventional Spark Plugs are a high quality alternative to Original Equipment (OE) parts. These Conventional Spark Plugs are designed for reliability and efficient performance, and are the high quality replacements for many vehicles on the road today. Their high-quality copper cores and outstanding suppression characteristics deliver reliable performance. They are also available for Marine applications. These premium aftermarket replacement spark plugs are manufactured to meet your expectations for fit, form, and function. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional.
Product Features:
See More
Product Features:
- Black Onyx coating helps reduce corrosion
- Copper core provides great heat transfer and helps maximize plug durability
- Ribbed suppressor seal extends resistance and helps prevent spark ‘flash over’ and misfires
- Nickel-chrome alloy sheathing helps prevent corrosion on center electrode
- Available for use in Marine applications
- Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
- Premium aftermarket replacement part
- Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
Motorcraft – Standard Spark Plug: Excellent Heat Dissipation & Durability (Part No.SP-431)
from
$2.79
The Standard Spark Plug by Motorcraft is the same high-quality part installed when your engine first rolled off the assembly line, ensuring a perfect fit and optimal performance. Designed with a 30,000-mile service interval, it features a copper core electrode and a nickel chromium alloy side electrode, providing exceptional heat dissipation and long-lasting durability. The built-in resistor minimizes radio frequency interference (RFI) while reducing electrode erosion, ensuring consistent performance over time. Its copper-glass seal securely bonds the insulator and terminal post center electrode, delivering the full required voltage at the spark gap while maintaining a gas-tight seal. With a tapered seat type for precise installation, this spark plug is engineered to meet the high standards set by Ford Motor Company, making it a reliable choice for maintaining your vehicle’s performance.
Product Features:
See More
Product Features:
- Same part installed when the engine rolled off the assembly line
- 30,000-mile service interval
- Copper core electrode and nickel chromium alloy side electrode for excellent heat dissipation and durability.
- Resistor reduces radio frequency interference (RFI) and electrode erosion
- Copper-glass seal bonds insulator and terminal post center electrode together to ensure full required voltage at spark gap and a gas-tight seal
Motorcraft – Spark Plug: Reliable Ignition & Durable Nickel Construction (Part No.SP-431-X)
from
$4.99
The Spark Plug with a standard center electrode design and durable nickel construction ensures reliable ignition performance for your vehicle. Featuring a nickel center electrode tip and a nickel ground electrode tip, this spark plug is built for consistent conductivity and long-lasting durability. Its tapered seat type provides a secure fit, enhancing overall engine efficiency and performance. Designed to deliver dependable starts and smooth operation, this spark plug is an excellent choice for maintaining your vehicle’s ignition system. With its robust materials and precise engineering, it offers great value and reliability for everyday driving needs.
Product Features:
See More
Product Features:
- Standard center electrode design ensures consistent ignition performance for reliable engine starts.
- Nickel center and ground electrode tips provide excellent conductivity and enhanced durability for long-lasting use.
- Tapered seat type offers a secure fit, improving engine efficiency and overall performance.
- Precisely engineered to deliver smooth operation and dependable ignition for everyday driving needs.
- Constructed with robust materials to ensure reliability and value for maintaining your vehicle’s ignition system.
Champion – Copper Plus Spark Plug (RF18YC): Dependable Performance & Durability (Part No.11)
from
$1.29
Copper Plus Spark Plug RF18YC delivers dependable performance and durability, making it a reliable choice for your vehicle’s ignition system. Featuring a copper core center electrode, it ensures precise heat control and enhanced conductivity, promoting longer life and consistent wear. The patented TinTac and ULTRASEAL coated shell provide superior corrosion resistance, while the SAC-9 semiconductor resistor effectively suppresses EMI and RFI for optimal engine performance. Built to ISO and SAE Standards, this spark plug guarantees proven reliability and compatibility with a wide range of vehicles. Its tapered seat type ensures a secure fit, contributing to efficient combustion and smooth operation. Designed for drivers seeking quality and value, this spark plug combines advanced engineering with robust materials to keep your engine running at its best.
Product Features:
See More
Product Features:
- Copper Plus – Dependable Performance.
- Copper core center electrode allows for accurate control of heat range for longer life
- Patented TinTac and ULTRASEAL coated shell for maximum corrosion resistance
- Patented SAC-9 semiconductor resistor for maximum EMI & RFI suppression
- Built to ISO and SAE standards for proven performance
Top Picks for 1955 Lincoln Capri Ignition Wires
Upgrade Lincoln Capris with top-quality Ignition Wires parts, including 4 OEM and aftermarket selections for your 1955 model.
Mallory – Mallory Prosidewinder 135F Univ/Wire Set (Part No.947)
from
$153.99
Features at a glance, low 300 Ohm resistance spiral core delivers high energy output for maximum spark at the plug. Great RFI suppression meets the demands of today’s on-board electronics, such as electronic ignition, sound systems, and computer controls. 8MM ozone-resistant red silicone jacket repels water, oil, grease, and fuel, and withstands temperatures up to 500 degrees. Fits V8, universal wire kit: includes 45 degree spark plug boots, female socket (standard) distributor boots and terminals.
Product Features:
See More
Product Features:
- Most Advanced Wire By Mallory
- RFI Suppression
- High Temperature Silicone Jacket
- Withstands Over 500+F
- Come In Ready To Use Kits
- Extra Long Kits
Mallory – Mallory Prosidewinder 90F Univ. Wire Set (Part No.937)
from
$133.99
Features at a glance, low 300 Ohm resistance spiral core delivers high energy output for maximum spark at the plug. Great RFI suppression meets the demands of today’s on-board electronics, such as electronic ignition, sound systems, and computer controls. 8MM ozone-resistant red silicone jacket repels water, oil, grease, and fuel, and withstands temperatures up to 500 degrees. Fits V8, universal wire kit: includes 45 degree spark plug boots, female socket (standard) distributor boots and terminals.
Product Features:
See More
Product Features:
- Most Advanced Wire By Mallory
- RFI Suppression
- High Temperature Silicone Jacket
- Withstands Over 500+F
- Come In Ready To Use Kits
- Extra Long Kits
PerTronix – 808415 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 115 Degree Red (Part No.808415)
from
$88.99
Most modern electronic ignition systems require suppression style wires to preserve sensitive components. Flame-Thrower 8mm Custom fit MAGx2 wires provide enhanced RFI suppression and dual current paths for more power delivered to the spark plug. Our custom wire sets have factory terminated ends for a superior connection and perfect fit, without cutting, crimping and splicing.
Product Features:
See More
Product Features:
- Two current paths for reliability and redundancy. -Primary path: Spiral wound stainless steel alloy.-Secondary path: Carbon impregnated fiberglass center core.
- Low 500 ohm per foot resistance.
- 8mm Silicone jacket to resist high temperatures, moisture, oil and chemicals.
- EPDM (Ethylene Propylene Diene Methylene) inner insulation for superior heat resistance and prevention of arcing and voltage leaks.
- Fiberglass reinforcing braid for added strength and flexibility.
PerTronix – 808480 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 180 Degree Red (Part No.808480)
from
$90.99
Most modern electronic ignition systems require suppression style wires to preserve sensitive components. Flame-Thrower 8mm Custom fit MAGx2 wires provide enhanced RFI suppression and dual current paths for more power delivered to the spark plug. Our custom wire sets have factory terminated ends for a superior connection and perfect fit, without cutting, crimping and splicing.
Product Features:
See More
Product Features:
- Two current paths for reliability and redundancy. -Primary path: Spiral wound stainless steel alloy.-Secondary path: Carbon impregnated fiberglass center core.
- Low 500 ohm per foot resistance.
- 8mm Silicone jacket to resist high temperatures, moisture, oil and chemicals.
- EPDM (Ethylene Propylene Diene Methylene) inner insulation for superior heat resistance and prevention of arcing and voltage leaks.
- Fiberglass reinforcing braid for added strength and flexibility.
In-Demand Ignition Coils and Boots for 1955 Lincoln Capris
Select from 1 premium Ignition Coils and Boots parts for your 1955 Lincoln Capri.
Carquest Premium – Ignition Coil (Part No.EBC1521)
from
$31.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Built by IATF 16949 certified manufacturers for consistent durability
- Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
- Segmented secondary bobbins to distribute high voltage and prevent shorting
- 100% end-of-line tested to ensure proper performance
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
Most Sold 1955 Lincoln Capri Distributors
Explore our best-selling Lincoln parts for the 1955 Capri among 3 OEM and aftermarket options starting from $13.99.
Carquest Premium – Distributor Rotor (Part No.DAA1009)
from
$13.99
The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.
Product Features:
See More
Product Features:
- All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
- Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
- Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
- Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.
Carquest Premium – Distributor Cap (Part No.CAC1087)
from
$21.99
The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.
Product Features:
See More
Product Features:
- All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
- Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
- Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
- Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.
PerTronix – 12823 Magnet Sleeve (only) for 1282 Ignitor Kit (Part No.12823)
from
$55.99
For over thirty years, the Ignitor has proven itself in applications ranging from race cars to tractors. The Ignitor replaces breaker points and troublesome factory electronic ignitions.
Product Features:
See More
Product Features:
- PerTronix 12823 Magnet Sleeve (only) for 1282 Ignitor Kit
- Replacement Parts (only) for Ignitor and Ignitor II Kits
Top-Rated Ignition and Tune-Up Products Brands For Your 1955 Lincoln Capri
Shop for the best-rated brands offering Ignition and Tune-Up Products and other products for your 1955 Lincoln Capris. Below you’ll find some of our best rated Ignition and Tune-Up Products from Mallory, NGK, and Autolite, and more. Ignition and Tune-Up Products from these brands that fit a 1955 Capri start at just $4.29 and are rated as high as 4.9 stars. OEM and aftermarket Ignition and Tune-Up Products don’t get more top quality, durable, and affordable than from the brands below.
Popular Mallory 1955 Lincoln Capri Ignition and Tune-Up Products
When it comes to maintaining or upgrading your 1955 Lincoln Capri, using quality Ignition and Tune-Up Products is essential to ensure durability and a perfect fit. Mallory ticks all of those boxes. We offer a wide selection of Mallory Ignition and Tune-Up Products, specifically designed for the 1955 Lincoln Capri. With over 2 Mallory brand Ignition and Tune-Up Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $133.99, with an average price of just $143.99. Plus, with over 3 customer reviews and an average rating of 4.9 stars, you can trust that our Mallory Ignition and Tune-Up Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$133.99
(1)
Mallory Prosidewinder 90F Univ. Wire Set
“Good quality wires with low impedence. The Advance listing says to get part 669 if you have male terminal distributor cap. This is not needed – the ”
from
$153.99
(2)
Mallory Prosidewinder 135F Univ/Wire Set
“Very high quality product for my show car. My car is a 1940 Ford Tudor Deluxe with a 1942 style ‘crab’ distributor. It still has the original engine t”
Popular NGK 1955 Lincoln Capri Ignition and Tune-Up Products
NGK auto parts is one of the highest quality Ignition and Tune-Up Product brands in the market. Any 1955 Lincoln Capri owner should feel confident when installing genuine NGK parts in their vehicle. To ensure the best fit and performance for your 1955 Capri, Advance Auto Parts carries a full inventory of 2 NGK Ignition and Tune-Up Products. Plus you will be keeping your Lincoln in peak condition while saving money because prices on these NGK Ignition and Tune-Up Products range from $6.99 to $12.49, plus, with more than 10 customer reviews and an impressive 4.8 stars average rating, you can be confident the Fram Ignition and Tune-Up Products below will deliver on both quality and value.
from
$12.49
(1)
Iridium IX Spark Plug (WR5IX): Extreme Ignitability & Durability
“This store is Great especially Doug at the Store !
Great Customer Service and knows all the right parts for my 5 vehicles !
Thankyou
JF”
from
$6.99
(9)
V-Power Nickel Spark Plug (WR5): Reliable Performance & Quick Starts
“NGK spark plugs always make a difference after installation. My old Mustang 200 6 cylinder loves them.”
FAQs for 1955 Lincoln Capri Ignition and Tune-Up Products
Which Ignition and Tune-Up Products are best-sellers for 1955 Lincoln Capris?
Out of 24 Ignition and Tune-Up Products that fit 1955 Lincoln Capris, the following parts are the top sellers:
- Copper Resistor Spark Plug: Quick Starts & Enhanced Durability (5390141) – $4.29
- Standard Spark Plug (BSF82CA): Reliable Performance & Durability (11865546) – $4.79
- Platinum Spark Plug: Enhanced Durability & Improved Performance (5393833) – $4.99
What’s the price range for 1955 Lincoln Capri Ignition and Tune-Up Products?
Ignition and Tune-Up Product prices for the 1955 Lincoln Capri start at $1.29 and go up to $388.99 for the most premium parts.
What’s the average price of a Ignition and Tune-Up Product for a 1955 Lincoln Capri?
The average price for Ignition and Tune-Up Products for the 1955 Lincoln Capri is $64.79. Keep in mind the variety of part types within our Ignition and Tune-Up Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Ignition and Tune-Up Products for other Lincoln Capri model years?
What are the cheapest Ignition and Tune-Up Products for my 1955 Lincoln Capri?
The cheapest 1955 Lincoln Capri Ignition and Tune-Up Products we carry in stock are:
- Copper Plus Spark Plug (RF18YC): Dependable Performance & Durability (5470000) – $1.29
- Standard Spark Plug: Excellent Heat Dissipation & Durability (18090021) – $2.79
- Copper Core Spark Plug: Reliable Performance & Durability (5391423) – $3.99
- Copper Resistor Spark Plug: Quick Starts & Enhanced Durability (5390141) – $4.29
- Standard Spark Plug (BSF82CA): Reliable Performance & Durability (11865546) – $4.79
What are the top-rated Ignition and Tune-Up Products that fit the 1955 Lincoln Capri?
Out of 27 reviews by customers, our 1955 Lincoln Capri Ignition and Tune-Up Products have an average customer rating of . These are some of the highest-rated Ignition and Tune-Up Product types for the 1955 Lincoln Capri and their top-rated products:
- Ignition Wires
- Mallory Prosidewinder 135F Univ/Wire Set (17370010) – $153.99
- Mallory Prosidewinder 90F Univ. Wire Set (17350051) – $133.99
- 808415 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 115 Degree Red (10110715) – $88.99
- Spark Plugs
- Mallory Prosidewinder 135F Univ/Wire Set (17370010) – $153.99
- Mallory Prosidewinder 90F Univ. Wire Set (17350051) – $133.99
- 808415 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 115 Degree Red (10110715) – $88.99
What types of Ignition and Tune-Up Products do you sell for my 1955 Lincoln Capri?
As of 11/2/25, these are some of the most in-demand types of Ignition and Tune-Up Products for a 1955 Lincoln Capri:
Can I get help with 1955 Lincoln Capri Ignition and Tune-Up Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Lincoln Ignition and Tune-Up Products and more.
What is your return policy for Lincoln Capri Ignition and Tune-Up Products?
Advance Auto Parts keeps returns simple. For new Lincoln Capri Ignition and Tune-Up Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
