1955 Chevrolet Two-Ten Series Exhaust Manifold and Headers
More 1955 Chevrolet Two-Ten Series Exhaust Manifold and Headers
Find your specific 1955 Chevrolet Two-Ten Series original or aftermarket Exhaust Manifold and Headers below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1955 Chevrolet Two-Ten Series Exhaust Manifold and Headers
ARP Auto Racing – For Use With Chevy Small Block, 3/8"-16, 1"L, Hex Head, Natural, Ss, Set Of 12 (Part No.400-1111)
from
$44.49
ARP manufactures a variety of premium grade bolt and stud kits to facilitate installation of exhaust headers including the popular stainless stud kit with 12 point nuts. The Stainless 300 material is not affected by corrosion or extreme heat, making it ideal for the application.
Product Features:
See More
Product Features:
- Material Is Not Affected By Corrosion Or Extreme Heat
- The Compact 12-Point Nut Lets You Easily Slip A Socket Close To The Pipe
- Substantially Stronger Than Grade 8 Hardware
- Nominally Rated At 170,000 Psi Tensile Strength
- 3/8″-16 Thread Size
- 1″ Underhead Length
Taylor Gaskets – Vibe-Lock Bolt (Part No.310016)
from
$89.99
Vibe-Lock Bolt
Mr. Gasket – Header Bolt Set (Part No.2210G)
from
$44.99
Made from durable 304 stainless steel, this compact bolt head and flange is ideal for use where space is minimal, typical on header flanges. It resists rust and corrosion, provides a clean professional appearance.
Product Features:
See More
Product Features:
- Bright ball burnish finish
- These bolts are made from 304 stainless
- Compact hex head is ideal where space is limited
- 12 per set
Taylor Gaskets – Vibe Lock Header Bolt Kit (Part No.310004)
from
$89.99
Vibe Lock Header Bolt Kit
Mr. Gasket – ExhstHdrBolt (Part No.2230G)
from
$46.99
ExhstHdrBolt
ARP Auto Racing – For Use With Chevy Small Block, 3/8"-16, 0.75"L, Hex Head, Natural Ss, Set Of 12 (Part No.400-1101)
from
$24.99
ARP manufactures a variety of premium grade bolt and stud kits to facilitate installation of exhaust headers including the popular stainless stud kit with 12 point nuts. The Stainless 300 material is not affected by corrosion or extreme heat, making it ideal for the application.
Product Features:
See More
Product Features:
- Material Is Not Affected By Corrosion Or Extreme Heat
- The Compact 12 Point Nut Lets You Easily Slip A Socket Close To The Pipe
- Substantially Stronger Than Grade 8 Hardware
- Nominally Rated At 170,000 PSI Tensile Strength
- 0.75″ Underhead Length
- Set of 12
ARP Auto Racing – 0.750" L, Hex Style Head Type, Black Oxide, Black, Chrome Moly, Set Of 12 (Part No.100-1101)
from
$25.99
ARP manufactures a variety of premium grade bolt and stud kits to facilitate installation of exhaust headers including the popular stainless stud kit with 12 point nuts. The Stainless 300 material is not affected by corrosion or extreme heat, making it ideal for the application.
Product Features:
See More
Product Features:
- Material Is Not Affected By Corrosion Or Extreme Heat
- The Compact 12-Point Nut Lets You Easily Slip A Socket Close To The Pipe
- Substantially Stronger Than Grade 8 Hardware
- Nominally Rated At 170,000 Psi Tensile Strength
- Set of 12
- 0.75″ Overall Length
ARP Auto Racing – For Use With Chevy Small Block, Black Oxide, Black, Chrome Moly, Set Of 12 (Part No.100-1201)
from
$18.99
ARP manufactures a variety of premium grade bolt and stud kits to facilitate installation of exhaust headers including the popular stainless stud kit with 12 point nuts. The Stainless 300 material is not affected by corrosion or extreme heat, making it ideal for the application.
Product Features:
See More
Product Features:
- Material Is Not Affected By Corrosion Or Extreme Heat
- The Compact 12 Point Nut Lets You Easily Slip A Socket Close To The Pipe
- Substantially Stronger Than Grade 8 Hardware
- Nominally Rated At 170,000 PSI Tensile Strength
- Set of 12
- 0.75″ Overall Length
Hooker Headers – ExhstHdr (Part No.2301HKR)
from
$617.99
ExhstHdr
Hooker Headers – Super Comp. Header (Part No.2112-1HKR)
from
$1072.99
Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.
Product Features:
See More
Product Features:
- Long Tube Lengths
- Long Transition Collectors
- Monstrous Low-Mid Range Torque
- Keep Top End Horsepower
- Provides Finest Fit
- Most Durable Design Available
Hooker Headers – Super Comp. Header (Part No.2102HKR)
from
$679.99
Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.
Product Features:
See More
Product Features:
- Long Tube Lengths
- Long Transition Collectors
- Monstrous Low-Mid Range Torque
- Keep Top End Horsepower
- Provides Finest Fit
- Most Durable Design Available
Popular 1955 Chevrolet Two-Ten Series Exhaust Manifold and Headers Categories
1955 Chevrolet Two-Ten Series Exhaust Manifold and Headers
Maybe you’re in the middle of a full rebuild of that 1955 Chevrolet Two-Ten Series. Maybe you just need a couple of Exhaust Manifold and Headers. Either way, Advance Auto Parts has 12 different Exhaust Manifold and Headers in our inventory ranging from $18.99 to $1,072.99. That means you can find the exact parts or products you need to keep that 1955 Chevrolet Two-Ten Series running smoothly.
Exhaust Manifold and Headers are only as good as their brand. We stock 4 different brands to make sure you have plenty of trusted parts to choose from for your 1955 Chevrolet Two-Ten Series. Mr. Gasket, ARP Auto Racing, and Hooker Headers are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Exhaust Manifold and Headers for your 1955 Chevrolet Two-Ten Series, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Exhaust Manifold and Headers to keep your 1955 Chevrolet Two-Ten Series rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Exhaust Manifold and Headers Brands To Make Your 1955 Chevrolet Two-Ten Series Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1955 Chevrolet Two-Ten Series demands trusted brand parts and products to keep it running. Many trusted brands of Exhaust Manifold and Headers make up Advance Auto Parts’ inventory, and all are ready to help make your Two-Ten Series the best it can be. Be sure to browse some of our top Exhaust Manifold and Headers brands and parts.
FAQs for 1955 Chevrolet Two-Ten Series Exhaust Manifold and Headers
What are the most purchased Exhaust Manifold and Headers for the 1955 Chevrolet Two-Ten Series?
Out of 12 Exhaust Manifold and Headers for the 1955 Chevrolet Two-Ten Series, the most popular in our inventory are:
from
$26.99
This product is not rated
For Use With Chevy Small Block, 3/8 – 16" Thread Size, .75" L, Natural, Set Of 12
Exhaust Manifold and Header Hardware
from
$44.49
This product is not rated
For Use With Chevy Small Block, 3/8"-16, 1"L, Hex Head, Natural, Ss, Set Of 12
Exhaust Manifold and Header Hardware
