from

$3.99

New Goodmark Rubber Floor Pan Plug, 1 Inch Diameter, Use As Required

Product Features:

1 Inch Diameter Use As Required
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$110.99

Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Rear Molded Door Seals. For 4-door wagon only, with RWD. Each. is 127-1/2 In. long. Pair. R&L.

Product Features:

Jet black to match the color of the original part
There’s no need to slam when you use Metro SUPERsoft weatherstripping products
Exact fit
High quality original equipment replacement part
Made in the USA

from

$674.99

New Goodmark Driver Side Full Length Floor Pan, For Sedan And Wagon Models

Product Features:

For Sedan And Wagon Models
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$424.99

Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Body Mount Kit. Complete kit replaces all upper and lower body cushions. 3 types of body mounts. 32 pieces total.

Product Features:

Jet black to match the color of the original part
Dense material to match the original
Exact fit
High quality original equipment replacement part
Made in the USA

from

$15.29

Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Rocker Arm Cover. Neoprene plug. Fits 1 In. hole. Each.

Product Features:

Jet black to match the color of the original part
Dense rubber to match the original
Exact fit
High quality original equipment replacement part
Made in the USA

from

$126.99

Window Sweeper Kit

from

$150.99

BodyMntBshKt

from

$106.99

Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.

Product Features:

Replace to Restore Ride Height
Gain Durability
Stronger Than Original Rubber Mounts

from

$4.99

Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Unbeaded Door and Trunk Lock Gasket. 1-3/16 In. O.D. 7/8 In. I.D. Each.

Product Features:

Jet black to match the color of the original part
Flat Gasket
Exact fit
High quality original equipment replacement part
Made in the USA

from

$7.99

This door lock rod clip is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this door lock rod clip matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$20.99

Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Vertical Seal for Vent Window. Each. is 17 In. long. Pair.

Product Features:

Jet black to match the color of the original part
Dense rubber to match the original
Exact fit
High quality original equipment replacement part
Made in the USA

from

$30.99

Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro makes a huge line of Trunk Lid Seals that all have that show winning look and fit. Our Trunk Lid Seals have a perfect fit. Trunk Seal with Clips. Exact profile. 14 Ft.7 In. long. Each.

Product Features:

Jet black to match the color of the original part
There’s no need to slam when you use Metro SUPERsoft weatherstripping products
Exact fit
High quality original equipment replacement part
Made in the USA

from

$43.99

Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro makes a huge line of Trunk Lid Seals that all have that show winning look and fit. Our Trunk Lid Seals have a perfect fit. Trunk Seal. 187 In. Long. Each.

Product Features:

Jet black to match the color of the original part
There’s no need to slam when you use Metro SUPERsoft weatherstripping products
Exact fit
High quality original equipment replacement part
Made in the USA

from

$20.49

Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Hood to Cowl Seal. 13/16 In. wide X 52 In. long. Each.

Product Features:

Jet black to match the color of the original part
There’s no need to slam when you use Metro SUPERsoft weatherstripping products
Exact fit
High quality original equipment replacement part
Made in the USA

from

$11.99

Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Hood to Cowl Seal. Each.

Product Features:

Jet black to match the color of the original part
There’s no need to slam when you use Metro SUPERsoft weatherstripping products
Exact fit
High quality original equipment replacement part
Made in the USA

from

$71.99

Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s Quarter Glass Seals are the highest quality reproductions available. With molded curves and a non-wrinkling lip design. Other brands do not compare. Quarter Window Seals, for 4-Door Hardtops. For leading edge of rear quarter windows. 14 In. long. Pair.

Product Features:

Jet black to match the color of the original part
Dense rubber to match the original
Exact fit
High quality original equipment replacement part
Made in the USA

from

$10.99

Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s Quarter Glass Seals are the highest quality reproductions available. With molded curves and a non-wrinkling lip design. Other brands do not compare. Windshield Pillar Seal, for Hardtops and Convertibles. Pair.

Product Features:

Jet black to match the color of the original part
Dense rubber to match the original
Exact fit
High quality original equipment replacement part
Made in the USA

from

$27.99

Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Upper Door Hinge In. J In. Seals. Straight section 15-1/2 In. long. Square hooked section 7 In. long, with 2 holes. Includes four clips. Pair. R&L.

Product Features:

Jet black to match the color of the original part
Dense material to match the original
Exact fit
High quality original equipment replacement part
Made in the USA

from

$71.99

Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Rear Quarter Window Door Lock Pillar Seal (upper). Made with steel cores. Pair. R&L.

Product Features:

Jet black to match the color of the original part
Dense material to match the original
Exact fit
High quality original equipment replacement part
Made in the USA

from

$4.49

Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Door Bumper. Made with twin retainers. 1-1/8 In. high X 9/16 In. wide X 1 In. long. Each.

Product Features:

Jet black to match the color of the original part
Dense rubber to match the original
Exact fit
High quality original equipment replacement part
Made in the USA

from

$11.29

Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Door Bumper. Made with twin retainers. 3/4 In. high X 1/2 In. wide X 15/16 In. long. Each.

Product Features:

Jet black to match the color of the original part
Dense rubber to match the original
Exact fit
High quality original equipment replacement part
Made in the USA

from

$11.79

Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Door, Hood and Trunk Bumper Cap for adjustment bolt. 7/8 In. diameter X 7/16 In. thick. Each.

Product Features:

Jet black to match the color of the original part
Dense material to match the original
Exact fit
High quality original equipment replacement part
Made in the USA

from

$134.99

New Goodmark Passenger Side Windshield Lower Corner Moulding

Product Features:

Made Of Stainless Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$134.99

New Goodmark Driver Side Windshield Lower Corner Moulding

Product Features:

Made Of Stainless Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$16.29

Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Seat Bumper. Made with steel core like original. 1-1/2 In. long, 7/16 In. thick. Two used per car. Each.

Product Features:

Jet black to match the color of the original part
Dense material to match the original
Exact fit
High quality original equipment replacement part
Made in the USA

from

$6.99

Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. License Plate Bumper. Fits a 1/4 In. hole. Each.

Product Features:

Jet black to match the color of the original part
Dense rubber to match the original
Exact fit
High quality original equipment replacement part
Made in the USA

from

$17.99

Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Hood Adjustment Bolt and Bumper. 1 In. diameter rubber head. 5/16 In. thick X 18 threads/inch X 1-3/4 In. long bolt. Each.

Product Features:

Jet black to match the color of the original part
Dense material to match the original
Exact fit
High quality original equipment replacement part
Made in the USA

from

$7.79

Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Hood Adjustment Bolt and Bumper. 1-1/8 In. diameter rubber head. 5/16 In. thick X 18 threads/inch X 2-1/8 In. long bolt. Each.

Product Features: