1954 Mercury Custom Steering and Chassis Parts
More 1954 Mercury Custom Steering and Chassis Parts Categories
If you’re looking for an original Steering and Chassis Parts replacement for a 1954 Mercury Custom, you can search through our selection below. You’ll also find aftermarket and OEM Steering and Chassis Parts to meet your needs.
Essential 1954 Mercury Custom Steering and Chassis Parts
Rare Parts – Ball Joint (Part No.RP10101)
from
$249.99
Rare Parts prides itself in only manufacturing high quality chassis parts. Diamond Series parts will exceed OEM and aftermarket products. Examples would be: forged verses stamped housings, greaseable, tighter machining tolerances, and proper heat treat of ball studs and mating components. Every Diamond Series part is tested and inspected in our facility prior to being sold. So rest assured you are getting a quality part when quality counts.
Product Features:
See More
Product Features:
- Full Ball Stud Pitman Arm end
- Greaseable
- Self aligning no bind design
- Low friction
Rare Parts – Ball Joint (Part No.RP10100)
from
$147.99
Rare Parts prides itself in only manufacturing high quality chassis parts. Diamond Series parts will exceed OEM and aftermarket products. Examples would be: forged verses stamped housings, greaseable, tighter machining tolerances, and proper heat treat of ball studs and mating components. Every Diamond Series part is tested and inspected in our facility prior to being sold. So rest assured you are getting a quality part when quality counts.
Product Features:
See More
Product Features:
- Full Ball Stud Pitman Arm end
- Greaseable
- Self aligning no bind design
- Low friction
Imperial – Transmission Oil Cooler Hose (Part No.248001)
from
$32.49
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Transmission oil cooler hose
- 11/32″ x 4-1/2′
- Designed for transmission fluid applications
- Made for tight-radius applications found in transmission cooler installations
- Compatible with 11/32 in. OEM cooler systems
- Tube made of black chemigum (nitrile)
- Reinforced with 2-spiral synthetic
- Covered in black Hypalon
- Compatible with 11/32 in. OEM cooler systems
- Tube made of black chemigum (nitrile)
- Reinforced with 2-spiral synthetic
- Covered in black Hypalon
Imperial – Quick Connect Coupler (Part No.240250)
from
$11.49
Imperial transmission line fitting kits allow for the installation of auxiliary cooler lines without cutting the vehicle’s original metal lines.
Product Features:
See More
Product Features:
- Quick Connect coupler
- Fits most 5/16″ transmission lines with 1/2″ – 20″ threads
- Simplifies transmission cooler installation
- Allows for auxiliary transmission cooler installation without cutting OE lines
Imperial – Mounting Kit System (Part No.226201)
from
$11.49
Product Features:
See More
- Imperial mounting kit system
- For installation of transmission coolers and electric fans
- Provides quick, effective installation of Imperial products
- Contains nylon mounting rods, foam pads and locking buttons
- Atermarket electric fan and cooler mounting rods
- Made with the highest quality materials
- Quality machined for durability
- Removable buttons for relocation
Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)
from
$20.79
Provides all necessary components for the proper reinstallation of an Imperial transmission oil cooler.
Product Features:
See More
Product Features:
- Transmission cooler reinstallation kit
- Contains part numbers 248001, 226201, 240250 and 4 hose clamps
- Provides all hardware for reinstallation of Imperial transmission coolers
- Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
Driveworks – Tie Rod End (Part No.DW-ES416L)
from
$18.29
Tie Rod End
MOOG – Tie Rod End (Part No.ES416L)
from
$56.99
Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- ABSORBS IMPACT — Belleville preload washer helps eliminate spring bind and shattering during shock load
- PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Rare Parts – Idler Arm (Part No.RP20326)
from
$188.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Improves steering response
- Reduces wander
- Reduces vibration
- Reduces tire wear
Rare Parts – Idler Arm (Part No.RP20325)
from
$182.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Improves steering response
- Reduces wander
- Reduces vibration
- Reduces tire wear
Lares – New Power Steering Cylinder (Part No.10031)
from
$347.99
New Power Steering Control Cylinders are engineered to OE specifications. Each unit is hydraulically tested and ball joints lubricated with a high quality grease. All units are carefully packaged to insure safe arrival at your door.
See More
Rare Parts – Idler Arm Repair Kit (Part No.RP20321)
from
$471.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Improves steering response
- Repairs worn components
- Reduces vibration
- Reduces tire wear
Rare Parts – Sway Bar Bushing (Part No.RP18494)
from
$25.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Restores vehicle handling
- Improves body roll
Rare Parts – Idler Arm Bushing (Part No.RP15309)
from
$23.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Improves steering response
- Reduces wander
- Reduces vibration
- Improves steering response
Rare Parts – Tie Rod Sleeve (Part No.RP25522)
from
$21.79
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Complete with clamps
- Used to set Toe in or out
- replaces rusted or corroded sleeves
- Used to connect inner and outer tie rod ends
Carquest Premium – Power Steering or Hydraulic Element (Part No.85653)
from
$21.89
CARQUEST HD hydraulic filters maintain optimal system cleanliness levels and are essential to ensuring reliability and reducing maintenance costs while meeting OE recommended service intervals.
Product Features:
See More
Product Features:
- Conventional cartridge hydraulic filter
- Made in USA
Edelmann – Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles (Part No.70699)
from
$31.49
Product Features:
See More
- Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
- Small size provides an easy fit, even in cramped systems
- Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
- Filter can be easily serviced, extending its functional lifespan considerably
Popular 1954 Mercury Custom Steering and Chassis Parts Categories
1954 Mercury Custom Steering and Chassis Parts
You count on your 1954 Mercury Custom to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 17 Steering and Chassis Parts ranging in price from $11.49 to $471.99, you’re sure to find everything you need for your 1954 Mercury Custom.
Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 7 different brands like Imperial, Rare, and Carquest Premium. 1954 Mercury Custom Steering and Chassis Parts start as low as $11.49!
One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 131 extensive product reviews on 1954 Mercury Custom Steering and Chassis Parts. Some of the top-rated Steering and Chassis Parts products we carry are Transmission Oil Cooler Replacement Hose with 3.0 stars.
Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 1954 Mercury Custom below to get started!
Top-Rated Steering and Chassis Parts Brands For Your 1954 Mercury Custom
Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1954 Mercury Custom running right for years to come. In our inventory you’ll find brands like Imperial, Rare, Carquest Premium, and even more.
Popular Imperial Steering and Chassis Parts
You’ll find popular Imperial brand products across Power Steering Parts. All are waiting to get your 1954 Mercury Custom back on the road. Some of the top-rated Imperial products in these categories are:
Top-Rated Imperial Steering and Chassis Parts
If Imperial are what you’re looking for, our inventory holds plenty. We stock Imperial brand Steering and Chassis Parts for your 1954 Mercury Custom, and some of our most reviewed Imperial parts include:
FAQs for 1954 Mercury Custom Steering and Chassis Parts
What are the most purchased Steering and Chassis Parts for the 1954 Mercury Custom?
Out of 17 Steering and Chassis Parts for the 1954 Mercury Custom, the most popular in our inventory are:
What are the top-rated 1954 Mercury Custom Steering and Chassis Parts?
Top-rated Steering and Chassis Parts for your 1954 Mercury Custom based on customer reviews/ratings are:
from
$14.49
(1)
Transmission Oil Cooler Replacement Hose
“This looks to be a well made hose and has Gates stamped on the hose itself. In general, I prefer Gates branded hoses.
11/32″ is an odd size hose. Th”
