1954 Ford Country Sedan Ignition and Tune-Up Products

Name: Distributor Vacuum Advance
Brand: Carquest Premium
SKU: VBC1041
Price: 51.99 USD

Below you will find various in-demand Ford Ignition and Tune-Up Products, components and accessories for your 1954 Country Sedan. Advance Auto Parts has popular Country Sedan parts like Ignition Wires, Ignition Boots, Spark Plugs and more. You’ll also find aftermarket and OEM Ignition and Tune-Up Products for other Country Sedan model years including 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974 and more. Select a category of 1954 Ford Country Sedan Ignition and Tune-Up Products below and start saving instantly.

Popular 1954 Ford Country Sedan Ignition and Tune-Up Products Categories

Spark Plugs

Ignition Coils

Spark Plug Boots

Spark Plug Wire Set Cut To Fits

Ignition Coil Boots

Standard Spark Plug Wires

Optional Spark Plug Wires

Ignition Conversion Kits

Distributor Cap Kits

Distributor Rotor Buttons

Ignition Starter Switches

Distributor Vacuum Advances

Points and Condensers and Kits

Distributor Modulator Sensor

Essential Ignition and Tune-Up Products for 1954 Ford Country Sedans

from

$51.99

The distributor is just one piece of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:

Application matched component to ensure the system can be returned to like new condition.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$11.99

Vacuum Advance & LockoutThese vacuum canisters help optimize ignition advance for maximum part throttle performance and cruise speed efficiency. Our vacuum lockout plates allow for precise pickup coil position and accurate rotor phasing.

Product Features:

PerTronix D9010 Flame-Thrower HEI Distributor Clockwise Vacuum Lockout Kit
These vacuum canisters help optimize ignition advance for maximum part throttle performance and cruise speed efficiency.

from

$14.79

The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$45.99

Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provides cooler operating temperatures.

Product Features:

Made from hi-performance 60 KV rated alkyd molding compound.
Cap and rotor kits include nylon rotor hold-down screws.
Flame-Thrower dust covers provide a larger air gap around the coil.

from

$46.99

Edelbrock Ignition Coil No. 22739 is a universal 12-volt cannister-style coil designed as a high-quality direct bolt-on replacement for OEM ignition coils. This advanced coil has a primary resistance of 1.4 ohms with an output of 42,000 volts. Internally, each Edelbrock Coil features heavy-duty primary and secondary windings for higher energy and greater spark that can help to provide quicker starts with improved idle quality. With a durable oil-filled housing, Edelbrock Coils are resistant to heat, shock and vibration with an effective operating range of 0 to 6,500 RPM.

Product Features:

output of 42000V

from

$79.99

An ACDelco Professional, premium aftermarket Ignition Coil is a high quality replacement for many vehicles on the road today. It increases electrical system voltage to help ignite the air/fuel mixture as the starting and charging system starts the engine, maintains the battery’s charge, and provides power to the electrical accessories while the engine is running. An ACDelco Professional Ignition Coil uses pure copper windings to improve durability and provides higher resistance to internal shorts and dielectric breakdown. Because the number and shape of the laminations determine the output characteristics of an ignition coil, ACDelco ensures that the silicone steel plates surrounding the ignition coil correctly match the original part size and number. Since steel laminations work best when they are new, shiny, and clean, ACDelco laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed. This premium aftermarket replacement ignition coil is manufactured to meet your expectations for fit, form, and function.

Product Features:

High quality coated windings to improve durability and provide protection against internal shorts and dielectric breakdown
Silicone steel plates surrounding the ignition coil correctly match the original part size and number exactly
Laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed
Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$12.99

Product Features:

High-quality direct replacement electrical connector allows you to replace only the damaged connector instead of the entire harness for a cost-effective repair
The terminal is manufactured with high grade materials such as copper alloy, brass, and phosphor bronze. The housing is fabricated using polyamide resins. All of the materials together provide the connectors with prolonged life and superior performance.
All electrical connectors are 100% tested for proper mechanical and electrical fit, form and function
Offering thousands of high-quality pigtails & sockets for nearly every electrical job

from

$7.99

The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine¿s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$35.99

Product Features:

SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
EPDM inner insulation stops power-robbing voltage leaks.
With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
Excellent interference suppression and consistent performance
Easy lock terminals for more convenient installation.
Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
Broad coverage available for most vehicles on the road today
Include grease pack to ensure easy installation and removal

from

$71.99

These ACCEL wire sets are a true performance upgrade replacement for OE types. Efficient delivery of spark energy for a good price. Silicone boots with black wire contain zinc-plated steel terminals. Noise suppression core. Set contains 8 plug wires with coil lead.

Product Features:

7mm And 8mm High Gloss Silicone Jacket
450° F Rated Silicone Jacket
Stainless Steel Plug Terminals
RFI Suppression For Street Driven Applications
Custom-fit Universal And Import Coverage
High-strength Fiberglass Braid Construction

from

$39.99

Product Features:

SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
EPDM inner insulation stops power-robbing voltage leaks.
With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
Excellent interference suppression and consistent performance
Easy lock terminals for more convenient installation.
Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
Broad coverage available for most vehicles on the road today
Include grease pack to ensure easy installation and removal

from

$35.99

Product Features:

SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
EPDM inner insulation stops power-robbing voltage leaks.
With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
Excellent interference suppression and consistent performance
Easy lock terminals for more convenient installation.
Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
Broad coverage available for most vehicles on the road today
Include grease pack to ensure easy installation and removal

from

$27.99

Product Features:

SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
EPDM inner insulation stops power-robbing voltage leaks.
With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
Excellent interference suppression and consistent performance
Easy lock terminals for more convenient installation.
Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
Broad coverage available for most vehicles on the road today
Include grease pack to ensure easy installation and removal

from

$172.99

The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.

Product Features:

Custom Fit For Make And Model Listed
Wires Are Pre-Cut To Exact Specifications
Bolt-on Performance
Conductor core features DuPont Kevlar material for increased tensile strength
Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately

from

$3.99

The Copper Plus spark plug is engineered for dependable performance and durability, making it a reliable choice for maintaining optimal engine function. Featuring a copper core center electrode, it delivers enhanced conductivity and precise heat control, ensuring good overall wear and extending the plug’s lifespan. Its nickel center electrode tip and tapered seat type further enhance reliability and engine performance. Built to ISO and SAE Standards, this spark plug guarantees proven performance and superior corrosion resistance, making it a durable option for long-term use. Designed as a standard replacement, it offers consistent functionality and compatibility with a wide range of vehicles. Whether you’re seeking improved heat management or reliable ignition, this spark plug is crafted to meet your needs with exceptional value.

Product Features:

Copper Plus – Dependable Performance and Durability
Copper core center electrode allows for accurate control of heat range for longer life
Superior corrosion resistance
Built to ISO and SAE standards for proven performance
Built to ISO and SAE standards for proven performance
Enhanced Conductivity and Heat Control: The Champion Copper Plus Spark Plug features a copper core electrode that provides increased conductivity and heat control, ensuring good overall wear and extending the plug’s life.
Reliable Nickel Center Electrode Tip: Featuring a nickel center electrode tip and a tapered seat type, this spark plug ensures enhanced reliability and optimal engine performance.

from

$3.99

Motorcraft Spark Plugs are original equipment on Ford Motor Company vehicles, engineered to meet strict Ford engineering standards for performance and reliability. These spark plugs are matched to specific engines to provide enhanced durability, eliminate misfires, reduce fuel consumption, and optimize emissions. They are resistant to oxidation and arc erosion, feature a multi-rib insulator to protect against misfire, and offer service intervals of up to 100,000 miles. Backed by Motorcraft’s Service Parts Warranty, these spark plugs are an exact fit for Ford, Lincoln, and Mercury vehicles and are designed with high-quality materials to provide reliable performance for almost any application. Motorcraft ignition components also help prevent false check engine lights, ensuring your vehicle runs smoothly.

Product Features:

Motorcraft spark plugs are matched to specific engines to provide enhanced durability, eliminate misfires, reduce fuel consumption and optimize emissions.
Backed by Motorcraft’s Service Parts Warranty
Exact fit for Ford, Lincoln and Mercury vehicles
Resistant to oxidation and arc erosion.
Multi-rib insulator protects against misfire.
Service intervals of up to 100,000 miles.
Motorcraft Spark Plugs are designed with high quality materials to provide reliable performance for almost any application.
Motorcraft Spark Plugs are what was in the vehicle when it was manufactured
Motorcraft ignition components help prevent false check engine lights.
Engineered for Ford Vehicles: Original equipment on Ford, Lincoln, and Mercury vehicles, ensuring an exact fit and reliable performance.

from

$389.99

The Ignition Conversion Kit allows point type ignition systems to be converted to an electronic ignition type system. These universal kits are designed to fit directly into the current distributor with little modification required.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the manufacturer.

from

$432.99

Product constructed to meet all design and operating characteristics as intended by the manufacturer.

from

$25.99

Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Ignition Switch allows for reliable control of the vehicle’s electrical systems and engine start-up, enhancing convenience and ensuring consistent performance during operation. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:

Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

from

$22.99

Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

from

$55.99

For over thirty years, the Ignitor has proven itself in applications ranging from race cars to tractors. The Ignitor replaces breaker points and troublesome factory electronic ignitions.

Product Features:

PerTronix 12823 Magnet Sleeve (only) for 1282 Ignitor Kit
Replacement Parts (only) for Ignitor and Ignitor II Kits

from

$16.05

BWD SELECT replacement parts are designed, specified and manufactured with one goal in mind – to make them the very best. We use the finest materials and improve on OE specifications whenever possible. The result is maximum performance and longevity.

Product Features:

100% pure copper windings in primary and secondary bobbins improve durability and provide higher resistance to internal shorts and dielectric breakdown
Electronic ignition module profile and feedback signal ensures proper OE fit, form, and function
Thermoplastic housing withstands heat stress for enhanced durability
Internal core made from grain-oriented electrical steel limits loss factor within magnetic circuit to reduce heat that may reduce coil endurance
External core made from oriented silicon steel ensures durability and longevity

from

$12.05

Driveworks offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.

Product Features:

Direct-fit OE replacement ensures ease of installation
Designed to meet OE performance
As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need

from

$90.99

Most modern electronic ignition systems require suppression style wires to preserve sensitive components. Flame-Thrower 8mm Custom fit MAGx2 wires provide enhanced RFI suppression and dual current paths for more power delivered to the spark plug. Our custom wire sets have factory terminated ends for a superior connection and perfect fit, without cutting, crimping and splicing.

Product Features:

Two current paths for reliability and redundancy. -Primary path: Spiral wound stainless steel alloy.-Secondary path: Carbon impregnated fiberglass center core.
Low 500 ohm per foot resistance.
8mm Silicone jacket to resist high temperatures, moisture, oil and chemicals.
EPDM (Ethylene Propylene Diene Methylene) inner insulation for superior heat resistance and prevention of arcing and voltage leaks.
Fiberglass reinforcing braid for added strength and flexibility.

from

$79.99

The street fire spark plug wires feature a low resistance conductor that’s wrapped in a sleek and durable black sleeve. The terminals are covered in black boots that protect the conductor from engine heat to ensure spark delivery.

Product Features:

Helically wound conductor suppresses electro and radio noise
Kevlar core combination for great strength and durability
Heavy Duty Terminals For Secure Connection
8mm silicone and synthetic jacket resists heat and abrasion
500 Ohms/ft. Resistance For Improved Spark Delivery And Power
Silicone Boots Protect Against High Exhaust Temps

from

$99.99

The traditional ACCEL combination of yellow wire and red spark plug boots has been added to these SuperStock Spiral Core 5000 Series wire sets, which feature color-matched wire and spark plug boots in blue, black, and red. With only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The results is higher performance through improved efficiency, quicker throttle response, and reduced emissions. This 8mm wire’s double silicone construction is rated to 550 degrees F. The high-gloss wire jacket resists moisture, chemicals, and heat extremes for longer life and great looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark plug terminals provide excellent long life, electrical conductivity, and corrosion resistance. Both universal and custom-fit applications are available for early and late model cars and trucks.

Product Features:

500 Ohms/ft Of Resistance
550 F Rated Silicone Jacket
Stainless Steel Plug Terminals
High RFI Suppression For Street And Strip Use
Universal And Import Coverage
High-strength Fiberglass Braid Construction
Pre And Post HEI Vehicles
8mm High Gloss Silicone Jacket

from

$71.99

ACCEL’s SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.

Product Features:

7mm And 8mm High Gloss Silicone Jacket
450 F Rated Silicone Jacket
Stainless Steel Plug Terminals
RFI Suppression For Street Driven Applications
Custom-fit Universal And Import Coverage
High-strength Fiberglass Braid Construction
Pre And Post HEI Vehicles

Upgrade your 1954 Ford Country Sedan with Top-Quality Ignition and Tune-Up Products

When it comes to maintaining or upgrading your 1954 Ford Country Sedan, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Ignition and Tune-Up Products are key to keeping your Country Sedan functioning at its best. At Advance Auto Parts, we offer a wide selection of 49 Ignition and Tune-Up Products for the 1954 Ford Country Sedan, designed to meet your needs without breaking the bank. From Ignition Wire replacements to Ignition Boots upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Ignition and Tune-Up Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Ignition and Tune-Up Products for your 1954 Ford Country Sedan at great prices. Our Ignition and Tune-Up Products inventory for this model ranges from just $2.29 to $432.99, with an average price of $89.99. Our 49 Ignition and Tune-Up Products in stock come from 10 trusted brands, so you’re sure to find the right part for your 1954 Ford Country Sedan without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1954 Ford Country Sedan, we stock popular OEM and aftermarket Ignition and Tune-Up Products from top names like Mallory, Champion, Accel, and more. Mallory Ignition and Tune-Up Products start at just $133.99 and boast an impressive 4.9 stars average rating from customers. Champion and Accel also bring quality to the table, with Ignition and Tune-Up Products available starting at $2.29, and at an average 4.7 stars rating. With 234 customer reviews and counting, our 1954 Ford Country Sedan Ignition and Tune-Up Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Ignition and Tune-Up Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1954 Ford Country Sedan is always ready to roll. We’re committed to providing you with everything you need to keep your Country Sedan in top shape, all in one place. Start shopping confidently below for your 1954 Ford Country Sedan!

Best-Selling Ignition Wires for 1954 Ford Country Sedans

Enhance the driving experience in your Ford with 9 quality Ignition Wire components, starting at $53.09.

show more show less

from

$153.99

Features at a glance, low 300 Ohm resistance spiral core delivers high energy output for maximum spark at the plug. Great RFI suppression meets the demands of today’s on-board electronics, such as electronic ignition, sound systems, and computer controls. 8MM ozone-resistant red silicone jacket repels water, oil, grease, and fuel, and withstands temperatures up to 500 degrees. Fits V8, universal wire kit: includes 45 degree spark plug boots, female socket (standard) distributor boots and terminals.

Product Features:

Most Advanced Wire By Mallory
RFI Suppression
High Temperature Silicone Jacket
Withstands Over 500+F
Come In Ready To Use Kits
Extra Long Kits

from

$110.99

500 Ohms/ft Of Resistance
550 F Rated Silicone Jacket
Stainless Steel Plug Terminals
High RFI Suppression For Street And Strip Use
Universal And Import Coverage
High-strength Fiberglass Braid Construction
Pre And Post HEI Vehicles
8mm High Gloss Silicone Jacket

from

$53.09

7mm Yellow Silicone Jacket
Street-driven Applications
Copper Core
Orange Spark Plug Boots
Pre HEI Vehicles
Universal Wire Set

from

$133.99

Most Advanced Wire By Mallory
RFI Suppression
High Temperature Silicone Jacket
Withstands Over 500+F
Come In Ready To Use Kits
Extra Long Kits

from

$88.99

Two current paths for reliability and redundancy. -Primary path: Spiral wound stainless steel alloy.-Secondary path: Carbon impregnated fiberglass center core.
Low 500 ohm per foot resistance.
8mm Silicone jacket to resist high temperatures, moisture, oil and chemicals.
EPDM (Ethylene Propylene Diene Methylene) inner insulation for superior heat resistance and prevention of arcing and voltage leaks.
Fiberglass reinforcing braid for added strength and flexibility.

from

$71.99

7mm And 8mm High Gloss Silicone Jacket
450° F Rated Silicone Jacket
Stainless Steel Plug Terminals
RFI Suppression For Street Driven Applications
Custom-fit Universal And Import Coverage
High-strength Fiberglass Braid Construction

from

$79.99

These ACCEL Super Stock wire sets are a true performance upgrade replacement for OE types. Efficient delivery of spark energy for a good price. Silicone boots with zinc-plated steel terminals.

Product Features:

Tinned copper core allows virtually no resistance
Great for points and magneto
450 Degree Wire Temperature Rating
Meets Or Exceeds OE Boot Temperature Rating

from

$90.99

Two current paths for reliability and redundancy. -Primary path: Spiral wound stainless steel alloy.-Secondary path: Carbon impregnated fiberglass center core.
Low 500 ohm per foot resistance.
8mm Silicone jacket to resist high temperatures, moisture, oil and chemicals.
EPDM (Ethylene Propylene Diene Methylene) inner insulation for superior heat resistance and prevention of arcing and voltage leaks.
Fiberglass reinforcing braid for added strength and flexibility.

from

$79.99

7mm And 8mm High Gloss Silicone Jacket
450 F Rated Silicone Jacket
Stainless Steel Plug Terminals
RFI Suppression For Street Driven Applications
Custom-fit Universal And Import Coverage
High-strength Fiberglass Braid Construction
Pre And Post HEI Vehicles

Most Popular 1954 Ford Country Sedan Ignition Boots

Customize your Ford with 4 Ignition Boots products like Spark Plug Boots, all priced under $176.99.

show more show less

from

$89.99

500 Ohms/ft Of Resistance
550 F Rated Silicone Jacket
Stainless Steel Plug Terminals
High RFI Suppression For Street And Strip Use
Universal And Import Coverage
High-strength Fiberglass Braid Construction
Pre And Post HEI Vehicles
8mm High Gloss Silicone Jacket

from

$63.99

7mm And 8mm High Gloss Silicone Jacket
450° F Rated Silicone Jacket
Stainless Steel Plug Terminals
RFI Suppression For Street Driven Applications
Custom-fit Universal And Import Coverage
High-strength Fiberglass Braid Construction

from

$71.99

7mm And 8mm High Gloss Silicone Jacket
450° F Rated Silicone Jacket
Stainless Steel Plug Terminals
RFI Suppression For Street Driven Applications
Custom-fit Universal And Import Coverage
High-strength Fiberglass Braid Construction
Pre And Post HEI Vehicles

from

$176.99

The oversized 8.8mm wire features a double silicone construction rated at over 600 F and 60kV. High gloss black silicone wire jacket not only looks great, but resists heat extremes, petrochemicals, ozone and moisture better than so-called blended materials for greater durability and longer life. High-density, high-temperature silicone insulation provides greater dielectric strength and eliminates arcing and the effects of corona better than typical OE style rubber materials. All-Kevlar stranded inner core and fiberglass braiding add greater pull strength and terminal retention. Stainless steel and brass terminals provide unsurpassed electrical conductivity and excellent corrosion resistance compared to terminals made of common or plated metals.

Product Features:

150 Ohms/ft Of Resistance
600 F Rated Silicone Jacket
Stainless Steel Plug Terminals
Custom-fit Universal And Import Coverage
Pre And Post HEI Vehicles
Spiral-Wound Copper/Nickel Alloy

Top Picks for 1954 Ford Country Sedan Spark Plugs

Upgrade Ford Country Sedans with top-quality Spark Plugs parts, including 9 OEM and aftermarket selections for your 1954 model.

show more show less

from

$3.99

The Copper Plus spark plug is engineered for dependable performance and durability, making it an ideal OE-type replacement. Featuring a copper core center electrode, it ensures precise heat control for extended lifespan and consistent wear. Its nickel-tipped center and ground electrodes enhance conductivity while resisting fouling, ensuring reliable ignition under various conditions. Built to ISO and SAE Standards, this spark plug delivers proven performance and superior corrosion resistance, making it a trustworthy choice for maintaining your vehicle’s efficiency. With a flat seat design and standard-grade construction, it offers compatibility with a wide range of applications, providing excellent value for long-term use.

Product Features:

Resists fouling
Superior corrosion resistance
Dependable and proven performance
Increased conductivity and heat control for good overall wear

from

$2.29

The Copper Plus spark plug is engineered for dependable performance and durability, making it an ideal OE-type replacement. Featuring a copper core center electrode, it ensures superior conductivity and precise heat control, which extends the plug’s lifespan and resists fouling. The nickel-tipped center and ground electrodes provide enhanced durability and corrosion resistance, ensuring reliable ignition performance over time. Built to ISO and SAE Standards, this spark plug guarantees proven performance and compatibility with a wide range of vehicles. Its flat seat type and resistor design further enhance its functionality, making it a trusted choice for maintaining engine efficiency.

Product Features:

Resists fouling
Superior corrosion resistance
Dependable and proven performance
Increased conductivity and heat control for good overall wear

from

$5.99

NGK Standard spark plugs (in the iconic NGK ‘yellow box’ packaging) are a proven OE cornerstone and technology customers have relied on for decades. Engineered specifically for OE applications, NGK Standard spark plugs provide OE quality nickel alloy reliable performance and design. NGK’s legendary high grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance, while triple gasket sealing prevents combustion gas leakage. Solid 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges. Trivalent metal plating ensures superior anti-corrosion and anti-seizing properties.

Product Features:

ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction nickel alloy center electrode provides consistent performance
RECOMMENDED USAGE: Best for vehicles with OE nickel alloy plugs, not recommended on vehicles with factory precious metal plugs
NGK’s OE CERAMIC TECHNOLOGY: High grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance
SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal

from

$3.99

Autolite Copper spark plugs are crafted to ensure quick starts and reliable performance, making them a dependable choice for your vehicle or application. Featuring a copper core center electrode, these spark plugs excel in thermal control and resist fouling, ensuring consistent functionality. The high nickel alloy center and ground electrodes are designed for extended life, while the high alumina multi-rib ceramic insulator enhances thermal conductivity and insulation for added strength. With a nickel-plated shell, these spark plugs boast superior corrosion resistance, offering durability over extended periods. The standard center electrode design with short projection and nickel tip material further contributes to their reliable performance. Ideal for regular-grade applications, these spark plugs are built with a flat seat type for secure installation. Whether you’re seeking enhanced ignition or long-lasting durability, Autolite Copper spark plugs deliver exceptional value and performance.

Product Features:

The copper core center electrode aids in thermal control and improves resistance to fouling.
Its specially engineered high nickel alloy center and ground electrode provides extended life.
The high alumina multi-rib ceramic insulator provides thermal conductivity and superior insulation for increased strength.
Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended periods.
The flat seat type design ensures a secure and precise installation, contributing to consistent and reliable performance.

from

$71.99

7mm And 8mm High Gloss Silicone Jacket
450 F Rated Silicone Jacket
Stainless Steel Plug Terminals
RFI Suppression For Street Driven Applications
Custom-fit Universal And Import Coverage
High-strength Fiberglass Braid Construction
Pre And Post HEI Vehicles

from

$99.99

500 Ohms/ft Of Resistance
550 F Rated Silicone Jacket
Stainless Steel Plug Terminals
High RFI Suppression For Street And Strip Use
Universal And Import Coverage
High-strength Fiberglass Braid Construction
Pre And Post HEI Vehicles
8mm High Gloss Silicone Jacket

from

$3.99

Copper Plus spark plug delivers reliable performance and durability, making it an ideal OE-type replacement for your vehicle. Featuring a copper core center electrode, it ensures precise heat control for extended lifespan and resists fouling for consistent ignition. The nickel-tipped center and ground electrodes enhance conductivity while providing superior corrosion resistance, ensuring long-term reliability. Built to ISO and SAE Standards, this spark plug guarantees proven performance and compatibility with a wide range of vehicles. Its flat seat design further ensures a secure fit, while the standard-grade construction makes it a dependable choice for maintaining your engine’s efficiency.

Product Features:

Resists fouling
Superior corrosion resistance
Dependable and proven performance
Increased conductivity and heat control for good overall wear

from

$3.99

ACDelco Professional Conventional Spark Plugs are designed for reliability and efficient performance, and are a high quality replacement for many vehicles on the road today. Their high-quality copper cores and outstanding suppression characteristics deliver reliable performance. They are also available for Marine applications. These premium aftermarket replacement spark plugs are manufactured to meet your expectations for fit, form, and function.

Product Features:

Black Onyx coating helps reduce corrosion
Copper core provides great heat transfer and helps maximize plug durability
Ribbed suppressor seal extends resistance and helps prevent spark ‘flash over’ and misfires
Nickel-chrome alloy sheathing helps prevent corrosion on center electrode
Available for use in Marine applications

Spark Plug: Reliable Ignition & Performance

from

$7.49

Ensure consistent ignition and optimal engine performance with this high-quality spark plug. Designed to deliver reliable starts and smooth operation, it enhances fuel efficiency and reduces emissions, making it an essential component for maintaining your vehicle’s peak performance. Built with durable materials, it withstands extreme temperatures and resists wear, ensuring long-lasting functionality. Its precision engineering guarantees compatibility with a wide range of vehicles, providing a perfect fit and hassle-free installation. Whether you’re replacing a worn-out plug or upgrading for better performance, this spark plug offers exceptional value and reliability for your automotive needs.

Product Features:

Delivers consistent ignition for smooth engine operation.
Enhances fuel efficiency and reduces emissions for environmentally friendly performance.
Built with durable materials to withstand extreme temperatures and resist wear.
Precision-engineered for compatibility with a wide range of vehicles.
Offers hassle-free installation with a perfect fit for reliable functionality.

In-Demand Distributors for 1954 Ford Country Sedans

Select from 6 premium Distributors parts for your 1954 Ford Country Sedan, with prices ranging from $13.99 to $55.99.

show more show less

from

$14.79

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$13.99

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$18.79

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$21.99

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$55.99

PerTronix 12823 Magnet Sleeve (only) for 1282 Ignitor Kit
Replacement Parts (only) for Ignitor and Ignitor II Kits

from

$39.99

Application matched component to ensure the system can be returned to like new condition.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

Most Sold 1954 Ford Country Sedan Ignition Coils and Boots

Explore our best-selling Ford parts for the 1954 Country Sedan among 6 OEM and aftermarket options starting from $31.99.

show more show less

from

$39.99

Product Features:

SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
EPDM inner insulation stops power-robbing voltage leaks.
With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
Excellent interference suppression and consistent performance
Easy lock terminals for more convenient installation.
Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
Broad coverage available for most vehicles on the road today
Include grease pack to ensure easy installation and removal

from

$43.99

Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Built by IATF 16949 certified manufacturers for consistent durability
Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
Segmented secondary bobbins to distribute high voltage and prevent shorting
Extensive design validation testing to ensure long-lasting reliability
100% end-of-line tested to ensure proper performance
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$41.49

Carquest ignition coils meet original equipment (OE) fit, form and function and are built to ensure reliable starting and performance. Carquest ignition coils are tested to ensure proper spark and perfect fit for each application. These ignition coils are an affordable repair choice to restore the vehicle’s ignition system performance. Carquest ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Long service life and durable performance
High dielectric strength for reliability
Corrosion-resistant connections
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
High reliability
Long service life

from

$31.99

Built by IATF 16949 certified manufacturers for consistent durability
Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
Segmented secondary bobbins to distribute high voltage and prevent shorting
100% end-of-line tested to ensure proper performance
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$79.99

High quality coated windings to improve durability and provide protection against internal shorts and dielectric breakdown
Silicone steel plates surrounding the ignition coil correctly match the original part size and number exactly
Laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed
Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$46.99

Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure confidence and product reliability, every time.

Top-Rated Ignition and Tune-Up Products Brands For Your 1954 Ford Country Sedan

Shop for the best-rated brands offering Ignition and Tune-Up Products and other products for your 1954 Ford Country Sedans. Below you’ll find some of our best rated Ignition and Tune-Up Products from Mallory, Champion, and Accel, and more. Ignition and Tune-Up Products from these brands that fit a 1954 Country Sedan start at just $2.29 and are rated as high as 4.9 stars. OEM and aftermarket Ignition and Tune-Up Products don’t get more top quality, durable, and affordable than from the brands below.

Popular Mallory 1954 Ford Country Sedan Ignition and Tune-Up Products

When it comes to maintaining or upgrading your 1954 Ford Country Sedan, using quality Ignition and Tune-Up Products is essential to ensure durability and a perfect fit. Mallory ticks all of those boxes. We offer a wide selection of Mallory Ignition and Tune-Up Products, specifically designed for the 1954 Ford Country Sedan. With over 2 Mallory brand Ignition and Tune-Up Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $133.99, with an average price of just $143.99. Plus, with over 3 customer reviews and an average rating of 4.9 stars, you can trust that our Mallory Ignition and Tune-Up Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $153.99

(2)

Mallory Prosidewinder 135F Univ/Wire Set

“Very high quality product for my show car. My car is a 1940 Ford Tudor Deluxe with a 1942 style ‘crab’ distributor. It still has the original engine t”

from $133.99

(1)

Mallory Prosidewinder 90F Univ. Wire Set

“Good quality wires with low impedence. The Advance listing says to get part 669 if you have male terminal distributor cap. This is not needed – the ”

Popular Champion 1954 Ford Country Sedan Ignition and Tune-Up Products

Champion auto parts is one of the highest quality Ignition and Tune-Up Product brands in the market. Any 1954 Ford Country Sedan owner should feel confident when installing genuine Champion parts in their vehicle. To ensure the best fit and performance for your 1954 Country Sedan, Advance Auto Parts carries a full inventory of 2 Champion Ignition and Tune-Up Products. Plus you will be keeping your Ford in peak condition while saving money because prices on these Champion Ignition and Tune-Up Products range from $2.29 to $3.99, plus, with more than 5 customer reviews and an impressive 4.7 stars average rating, you can be confident the Fram Ignition and Tune-Up Products below will deliver on both quality and value.

from $2.29

(2)

Copper Plus Spark Plug (RH10C): Dependable Performance & Durability

“Exact and better plug than the o.e.m. version”

from $3.99

(3)

Copper Plus Spark Plug (H10C): Dependable Performance & Durability

“For a 12 hp Kohler engine.”

FAQs for 1954 Ford Country Sedan Ignition and Tune-Up Products

Which Ignition and Tune-Up Products are best-sellers for 1954 Ford Country Sedans?

Out of 49 Ignition and Tune-Up Products that fit 1954 Ford Country Sedans, the following parts are the top sellers:

Copper Non-Resistor Spark Plug: Quick Starts & Reliable Performance (5391628) – $3.99
Copper Plus Spark Plug (H10C): Dependable Performance & Durability (18470215) – $3.99
Ignition Coil: Meets or Exceeds OE Specifications, 1 Count (12351959) – $43.99

What’s the price range for 1954 Ford Country Sedan Ignition and Tune-Up Products?

Ignition and Tune-Up Product prices for the 1954 Ford Country Sedan start at $2.29 and go up to $432.99 for the most premium parts.

What’s the average price of a Ignition and Tune-Up Product for a 1954 Ford Country Sedan?

The average price for Ignition and Tune-Up Products for the 1954 Ford Country Sedan is $89.99. Keep in mind the variety of part types within our Ignition and Tune-Up Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Ignition and Tune-Up Products for other Ford Country Sedan model years?

Yes, we currently carry Ignition and Tune-Up Products for 23 model years of Ford Country Sedans between 1950 and 1974. Ignition and Tune-Up Products are bought most frequently for the following model years: 1974, 1973, 1972, 1971, 1970, 1969, 1968, 1967, and 1966.

What are the cheapest Ignition and Tune-Up Products for my 1954 Ford Country Sedan?

The cheapest 1954 Ford Country Sedan Ignition and Tune-Up Products we carry in stock are:

Copper Plus Spark Plug (RH10C): Dependable Performance & Durability (12013920) – $2.29
Copper Non-Resistor Spark Plug: Quick Starts & Reliable Performance (5391628) – $3.99
Copper Plus Spark Plug (H10C): Dependable Performance & Durability (18470215) – $3.99
Copper Plus Spark Plug (H10C): Dependable Performance & Durability (18470672) – $3.99
Copper Core Spark Plug: Reliable Performance & Durability (11400046) – $3.99

What are the top-rated Ignition and Tune-Up Products that fit the 1954 Ford Country Sedan?

Out of 234 reviews by customers, our 1954 Ford Country Sedan Ignition and Tune-Up Products have an average customer rating of . These are some of the highest-rated Ignition and Tune-Up Product types for the 1954 Ford Country Sedan and their top-rated products:

Spark Plugs
- Standard Nickel Spark Plug (B-6L): Reliable OE Performance (19650315) – $5.99
- Copper Plus Spark Plug (H10C): Dependable Performance & Durability (18470215) – $3.99
- Copper Plus Spark Plug (RH10C): Dependable Performance & Durability (12013920) – $2.29
Ignition Coils and Boots
- Standard Nickel Spark Plug (B-6L): Reliable OE Performance (19650315) – $5.99
- Copper Plus Spark Plug (H10C): Dependable Performance & Durability (18470215) – $3.99
- Copper Plus Spark Plug (RH10C): Dependable Performance & Durability (12013920) – $2.29

What types of Ignition and Tune-Up Products do you sell for my 1954 Ford Country Sedan?

As of 11/2/25, these are some of the most in-demand types of Ignition and Tune-Up Products for a 1954 Ford Country Sedan:

Can I get help with 1954 Ford Country Sedan Ignition and Tune-Up Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Ignition and Tune-Up Products and more.

What is your return policy for Ford Country Sedan Ignition and Tune-Up Products?

Advance Auto Parts keeps returns simple. For new Ford Country Sedan Ignition and Tune-Up Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1954 Ford Country Sedan Ignition and Tune-Up Products

Carquest Premium – Distributor Vacuum Advance (Part No.VBC1041)

PerTronix – D9010 Flame-Thrower HEI Distributor Clockwise Vacuum Lockout Kit (Part No.D9010)

Carquest Premium – Distributor Cap (Part No.CAC1066)

PerTronix – D4000 Flame-Thrower HEI Distributor Cap and Rotor Kit Black (Part No.D4000)

Edelbrock – Ignition Coil No. 22739 12V Cannister Style, 1.4 Ohm Primary Resistance (Part No.22739)

ACDelco – Ignition Coil (Part No.U505)

Carquest – Distributor Rotor (Part No.D197)

Carquest – Distributor Rotor (Part No.23A1023)

Carquest Premium – Spark Plug Wire Set: 9 Wires, Increased performance, Designed for direct fit (Part No.35-8194)

Accel – Universal Fit Super Stock 8mm Suppression; Spark Plug Wire Set (Part No.4040K)

Carquest Premium – Spark Plug Wire Set: 7 Wires, Increased performance, Designed for direct fit (Part No.35-6188)

Carquest Premium – Spark Plug Wire Set: 9 Wires, Increased performance, Designed for direct fit (Part No.35-8193)

Carquest Premium – Spark Plug Wire Set: 7 Wires, Increased performance, Designed for direct fit (Part No.35-6189)

MSD Ignition – Wire Set; Black Super Conductor; Ford 351C-400; Socket (Part No.31383)

Champion – Copper Plus Spark Plug (RV15YC4): Dependable Performance & Durability (Part No.18)

Motorcraft – Standard Spark Plug: Enhances Durability & Reduces Misfires (Part No.SP-415-A)

Carquest Premium – Ignition Conversion Kit (Part No.CBA1703)

Carquest Premium – Ignition Conversion Kit (Part No.CBA1801)

Carquest Premium – Ignition Switch (Part No.CSC1624)

Carquest Premium – Ignition Switch (Part No.CSC1393)

PerTronix – 12823 Magnet Sleeve (only) for 1282 Ignitor Kit (Part No.12823)

Carquest – Contact Set (Points) (Part No.A101V)

Driveworks – Distributor Condenser (Part No.14007)

PerTronix – 808480 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 180 Degree Red (Part No.808480)

MSD Ignition – Wire Set; Street Fire; Ford 351C-460; Socket (Part No.5542)

Accel – 8Mm Super Stock Spiral Uni Bk (Part No.5040K)

Accel – 8Mm Super Stock Graphite Uni (Part No.4040B)

Mallory – Mallory Prosidewinder 135F Univ/Wire Set (Part No.947)

Accel – 8Mm Super Stock Spiral Uni Rd (Part No.5040R)

Accel – 7Mm Super Stock Copper Uni (Part No.3008)

Mallory – Mallory Prosidewinder 90F Univ. Wire Set (Part No.937)

PerTronix – 808415 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 115 Degree Red (Part No.808415)

Accel – Universal Fit Super Stock 8mm Suppression; Spark Plug Wire Set (Part No.4040K)

Accel – 8Mm Super Stock Copper Uni (Part No.4038B)

PerTronix – 808480 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 180 Degree Red (Part No.808480)

Accel – 8Mm Super Stock Copper Uni (Part No.4038)

Accel – 8Mm Super Stock Spiral Uni Bu (Part No.5040B)

Accel – Universal Fit Super Stock 8mm Suppression; Spark Plug Wire Set (Part No.4040)

Accel – Universal Fit Super Stock 8mm Suppression; Spark Plug Wire Set (Part No.4040R)

Accel – Universal Fit 300+ Race Spark Plug Wire Set (Part No.7040)

Champion – Copper Plus Spark Plug (H10C): Dependable Performance & Durability (Part No.844)

Champion – Copper Plus Spark Plug (RH10C): Dependable Performance & Durability (Part No.854)

NGK – Standard Nickel Spark Plug (B-6L): Reliable OE Performance (Part No.3212)

Autolite – Copper Non-Resistor Spark Plug: Quick Starts & Reliable Performance (Part No.216)

Accel – 8Mm Super Stock Graphite Uni (Part No.4040B)

Accel – 8Mm Super Stock Spiral Uni Bk (Part No.5040K)

Champion – Copper Plus Spark Plug (H10C): Dependable Performance & Durability (Part No.844-1)

ACDelco – Copper Core Spark Plug: Reliable Performance & Durability (Part No.C45L)

Motorcraft – Spark Plug: Reliable Ignition & Performance (Part No.SP-473-AX)

Carquest Premium – Distributor Cap (Part No.CAC1066)

Carquest Premium – Distributor Rotor (Part No.DAA1009)

Carquest – Distributor Cap (Part No.24C1029)

Carquest Premium – Distributor Cap (Part No.CAC1087)

PerTronix – 12823 Magnet Sleeve (only) for 1282 Ignitor Kit (Part No.12823)

Carquest Premium – Distributor Vacuum Advance (Part No.VBC1039)

Carquest Premium – Spark Plug Wire Set: 7 Wires, Increased performance, Designed for direct fit (Part No.35-6188)

Carquest Premium – Ignition Coil: Meets or Exceeds OE Specifications, 1 Count (Part No.EBC1414)

Carquest – Ignition Coil: Meets OE Specifications, 1 Count (Part No.26C1041)

Carquest Premium – Ignition Coil (Part No.EBC1521)

ACDelco – Ignition Coil (Part No.U505)

Carquest Premium – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.EBC1715)