1953 Ford F-250 Pickup Brake Parts
More 1953 Ford F-250 Pickup Brake Parts Categories
If you’re looking for an original Brake Parts replacement for a 1953 Ford F-250 Pickup, you can search through our selection below. You’ll also find aftermarket and OEM Brake Parts to meet your needs.
Essential 1953 Ford F-250 Pickup Brake Parts
Carquest Wearever – Brake Master Cylinder MCA39634: New, With Reservoir (Part No.MCA39634)
from
$79.99
Cylinder casting is constructed from high-quality cast iron or aluminum for long-lasting durability
Product Features:
See More
Product Features:
- All rubber parts are of high-quality EPDM compound for resistance to DOT3 or DOT4 brake fluid
- Key components like spring are from high and stable quality suppliers.
- Products are machined by CNC machines with strictly quality control.
- Parts assembled in a clean environment and all parts were thoroughly cleaned before assembly.
- Direct replacement for a proper fit
- Manufactured to strict engineering quality standards, meets S.A.E. specifications
- Each product is 100% tested on production lines and sampling tested prior to shipment
- Key working procedure used CNC, positioning accuracy ± 0.005/300 mm, repeat positioning accuracy + /-0.038 mm
- Main cylinder hole of measured by the 0.034 mm distinguish precision pneumatic instruments, surface roughness instrument and endoscope testing
Wearever – Remanufactured Brake Master Cylinder (Part No.10-1529BXR)
from
$61.99
Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders are treate
Product Features:
See More
Product Features:
- Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
- Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
- Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
- Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
- Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
- Plastic reservoirs are vacuum-tested to ensure they are leak free.
Wearever – Remanufactured Brake Master Cylinder (Part No.10-1856)
from
$24.99
Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders are treate
Product Features:
See More
Product Features:
- Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
- Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
- Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
- Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
- Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
- Plastic reservoirs are vacuum-tested to ensure they are leak free.
Wearever – Remanufactured Brake Master Cylinder (Part No.10-1617)
from
$20.99
Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders are treate
Product Features:
See More
Product Features:
- Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
- Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
- Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
- Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
- Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
- Plastic reservoirs are vacuum-tested to ensure they are leak free.
Carquest Wearever – New Brake Master Cylinder: With Reservoir, Exact Fit, 1" Bore (Part No.MCA83579)
from
$59.99
This brake master cylinder is precision-engineered to match the design, function, and performance of the original master cylinder on specific vehicle years, makes and models. It is made of new, high-quality materials for a safe, durable replacement.
Product Features:
See More
Product Features:
- Precise replacement – cylinder housing is constructed to match the casting material of the original part and ensure similar performance
- Durable design – all rubber components are made of high-quality EPDM compound for resistance to glycol-based brake fluid
- 100% new – made entirely of new materials, not remanufactured, to ensure highest quality and safety
- Strict specifications – made to meet rigorous SAE International standards
Carquest Wearever – Drum Brake Wheel Cylinder (Part No.WCA14522)
from
$20.49
This direct replacement drum brake wheel cylinder was specifically engineered to match the fit, function and performance of the original wheel cylinder on particular vehicles. It is manufactured and tested for quality assurance.
Product Features:
See More
Product Features:
- Ideal replacement – specifically engineered to be direct match for original drum brake wheel cylinder on particular vehicles
- Cost-effective fix – replacement of cylinder while servicing drum brakes is fastest, surest way to ensure brake performance
- Quality materials – made with high-quality EPDM rubber cups and boots for long-lasting performance
- Professionally tested – wheel cylinder bores are surface-tested to ensure an optimum sealing surface for the pressure cups
Carquest Wearever – WHEEL CYLINDER (Part No.WCA59240)
from
$13.99
Assemblies match what was originally installed on the car from OE for quality, fit, function and material.
Product Features:
See More
Product Features:
- Wheel cylinders match what was originally installed on the vehicle.
- Each cylinder matches OE for form, fit and function and material
- Wheel cylinders provide leak-free performance by providing the highest quality resistance to heat, corrosion and leakage
- All bleeder screws are coated providing extra protection
- Rubber components are manufactured in house using the latest formula EPDM material.
- Wheel cylinders use correct EPDM rubber for DOT3, 4 and 5 brake fluids
- All casting machining is done by computer programed CNC machines.
- Castings go through 2 inspection processes (via micrometer and via go-no go fixture check) before being sent to the assembly department insuring all machining is correct and matches the OE.
Carquest Wearever – WHEEL CYLINDER (Part No.WCA57146)
from
$16.99
Assemblies match what was originally installed on the car from OE for quality, fit, function and material.
Product Features:
See More
Product Features:
- Wheel cylinders match what was originally installed on the vehicle.
- Each cylinder matches OE for form, fit and function and material
- Wheel cylinders provide leak-free performance by providing the highest quality resistance to heat, corrosion and leakage
- All bleeder screws are coated providing extra protection
- Rubber components are manufactured in house using the latest formula EPDM material.
- Wheel cylinders use correct EPDM rubber for DOT3, 4 and 5 brake fluids
- All casting machining is done by computer programed CNC machines.
- Castings go through 2 inspection processes (via micrometer and via go-no go fixture check) before being sent to the assembly department insuring all machining is correct and matches the OE.
Carquest Wearever – Drum Brake Wheel Cylinder (Part No.WCA370043)
from
$21.99
Assemblies match what was originally installed on the car from OE for quality, fit, function and material.
Product Features:
See More
Product Features:
- Wheel cylinders match what was originally installed on the vehicle.
- Each cylinder matches OE for form, fit and function and material
- Wheel cylinders provide leak-free performance by providing the highest quality resistance to heat, corrosion and leakage
- All bleeder screws are coated providing extra protection
- Rubber components are manufactured in house using the latest formula EPDM material.
- Wheel cylinders use correct EPDM rubber for DOT3, 4 and 5 brake fluids
- All casting machining is done by computer programed CNC machines.
- Castings go through 2 inspection processes (via micrometer and via go-no go fixture check) before being sent to the assembly department insuring all machining is correct and matches the OE.
Carquest Wearever – Drum Brake Wheel Cylinder (Part No.WCA610164)
from
$21.99
Assemblies match what was originally installed on the car from OE for quality, fit, function and material.
Product Features:
See More
Product Features:
- Wheel cylinders match what was originally installed on the vehicle.
- Each cylinder matches OE for form, fit and function and material
- Wheel cylinders provide leak-free performance by providing the highest quality resistance to heat, corrosion and leakage
- All bleeder screws are coated providing extra protection
- Rubber components are manufactured in house using the latest formula EPDM material.
- Wheel cylinders use correct EPDM rubber for DOT3, 4 and 5 brake fluids
- All casting machining is done by computer programed CNC machines.
- Castings go through 2 inspection processes (via micrometer and via go-no go fixture check) before being sent to the assembly department insuring all machining is correct and matches the OE.
PowerStop – Z16 Low-Dust Ceramic Brake Pads (Part No.16-655)
from
$35.99
The Power Stop Z16 Evolution ceramic brake pads feature a ceramic formula designed to maximize stopping power while reducing brake dust & eliminating noise. Using OE positive mold technology along with a thermal scorched pad surface, Z16 pads maintain consistent wear and performance while ensuring a fast break-in. The Z16 Evolution ceramic brake pads are an affordable stock replacement for all vehicles.
Product Features:
See More
Product Features:
- Low-dust ceramic formula designed to maximize stopping power and keep wheels clean
- Positive mold technology for consistent wear and performance
- Thermal scorched pad surface for a fast break-in
- Chamfered and slotted to ensure noise-free braking
- Powder coated backing plate resists rust and corrosion to provide extended pad life
- Multi-Layer rubberized shims provide virtually noise-free braking
Carquest Premium Gold – Semi-Metallic Brake Pads – (4-Pad Set) (Part No.GMKD702)
from
$59.99
Carquest Premium Gold brake pads are original equipment replacement brake pads that provide consistent, quiet, and clean braking.
Product Features:
See More
Product Features:
- Application-specific formulations designed for extended pad life and clean wheels
- Multi-layer shim for near silent braking
- OE designed slots and chamfers for consistent performance
- Hardware included on popular and late-model applications
Carquest Frontline – Severe Duty Brake Pads Both, With Hardware, Ideal For Heavy Towing And Hauling (Part No.FLD655)
from
$74.99
Providing maximum braking performance on towing, heavy hauling, and frequent braking applications, Carquest Frontline Severe Duty brake pads are the ideal choice for severe duty applications.
Product Features:
See More
Product Features:
- Severe duty friction formulations dissipate heat faster for extended pad life
- On-vehicle testing similar to original equipment tests
- Patented 4-Layer HEX Shim Technology provides quiet braking
- HEX shim design utilizes aramid fibers, the same fibers used in bulletproof vests, to reduce shim wear
- PTFE coated hardware and caliper pin grease included for nearly every application
- Powder-coated backing plate prevents corrosion
Hawk Performance – Disc Brake Pad (Part No.HB299P.650)
from
$149.99
Disc Brake Pad
Carquest Premium Gold – Brake Pads Without Hardware, Semi-Metallic, Long Pad Life, Quiet Braking (Part No.GMKD50)
from
$42.99
Carquest Premium Gold brake pads are original equipment replacement brake pads that provide consistent, quiet, and clean braking.
Product Features:
See More
Product Features:
- Application-specific friction formulations provide shorter stopping distances and extended pad life
- Hardware included for most applications, provides better value and
- OE-designed slots and chamfers to reduce noise and vibration
- Multi-layer shim provides near silent braking
- Powder-coated backing plate prevents corrosion
Carquest Professional Platinum – Brake Pads Both, With Hardware, Better Performance, Longer Life, Quiet, Ideal For Towing (Part No.PMD655H)
from
$69.99
Carquest Professional Platinum Truck/SUV brake pads are the optimal braking solution that provide an unmatched level of performance and reliability. These brake pads are engineered by an Original Equipment Manufacturer (O.E.M.) that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. We use an industry-leading number of friction formulations for maximum performance and extended pad life on each application. Carquest Professional Platinum brake pads also utilize a patented 4-layer HEX shim, now upgraded with aramid fibers, to provide quiet braking and reduce shim wear. These brake pads are also supplied with coated brake hardware and caliper pin grease for nearly every application. Carquest Professional Platinum brake pads are the ideal choice when looking for shorter stopping distances, quiet braking and longer-lasting brakes.
Product Features:
See More
Product Features:
- Industry-leading number of application specific formulations for maximum performance and extended pad life
- On-vehicle testing similar to original equipment tests
- Patented 4-Layer HEX Shim Technology provides quiet braking
- HEX shim design utilizes aramid fibers, the same fibers used in bulletproof vests, to reduce shim wear
- Burnishing compound allows for a faster break-in of pads and rotors
- PTFE coated hardware and caliper pin grease included for nearly every application
- Powder-coated backing plate prevents corrosion
Cardone – Brake Master Cylinder Bleeding Tool (Part No.10-5000MCB)
from
$15.99
CARDONE Master Cylinder Bench Bleeder Tool cuts typical bleeding procedures in half and is a more effective way to purge the brake system of air than other bleeding procedures. This handy, innovative tool is a must, just as bench bleeding is for removing all the air from your brake system, allowing you to spend less time in the garage, and more time on the road.
Product Features:
See More
Product Features:
- Each unit is 100% new, providing consistent performance when servicing your brake system
- Easy to transfer for on-the-spot master cylinder bleeding
- Fluid measurements clearly displayed on each unit in both ounces and milliliters for convenience
- Easy to clean to ensure no cross contamination
- Durability for long lasting performance
Carquest Professional Platinum – Brake Pads With Hardware, Better Performance, Longer Life, Quiet, Ideal For Towing (Part No.PMD711H)
from
$64.99
Carquest Professional Platinum Truck/SUV brake pads are the optimal braking solution that provide an unmatched level of performance and reliability. These brake pads are engineered by an Original Equipment Manufacturer (O.E.M.) that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. We use an industry-leading number of friction formulations for maximum performance and extended pad life on each application. Carquest Professional Platinum brake pads also utilize a patented 4-layer HEX shim, now upgraded with aramid fibers, to provide quiet braking and reduce shim wear. These brake pads are also supplied with coated brake hardware and caliper pin grease for nearly every application. Carquest Professional Platinum brake pads are the ideal choice when looking for shorter stopping distances, quiet braking and longer-lasting brakes.
Product Features:
See More
Product Features:
- Industry-leading number of application specific formulations for maximum performance and extended pad life
- On-vehicle testing similar to original equipment tests
- Patented 4-Layer HEX Shim Technology provides quiet braking
- HEX shim design utilizes aramid fibers, the same fibers used in bulletproof vests, to reduce shim wear
- Burnishing compound allows for a faster break-in of pads and rotors
- PTFE coated hardware and caliper pin grease included for nearly every application
- Powder-coated backing plate prevents corrosion
Akebono – Pro-ACT Ultra-Premium OE Ceramic Brake Pads (Part No.N1010131586AKE)
from
$100.95
For replacement brake pads that are designed for your vehicle, trust the name that manufacturers trust Akebono Pro-ACT® Ultra-Premium brake pads. Manufactured from carefully selected materials designed to help minimize and/or virtually eliminate unwanted brake dust, Pro-ACT Ultra-Premium brake pads provide consistent, smooth stopping power across a wide range of driving conditions, including panic stops. Replacement Brake Pads from the Creators of Akebono Ceramic Technology® Engineered to eliminate noise, vibration, and harshness, Pro-ACT Ceramic Disc Brake Pads provide the ultimate braking experience. The best replacement for restoring OE ceramic pad performance, Pro-ACT Ceramic Disc Pads are also ideal for upgrading from conventional pads. In addition to dramatically quieter braking, Pro-ACT Ceramic Pads provide best-in-class braking performance, including enhanced initial effectiveness (no break-in required), high resistance to fade, consistent brake pedal feel, and ultra-low dusting for cleaner wheels and tires. Akebono’s ceramic technology also causes minimal wear on brake rotors.
Product Features:
See More
Product Features:
- Virtually eliminates noise, vibration, and harshness (NVH)
- Vehicle-optimized ceramic formulas for superior performance
- Unrivaled stopping power
- Clean wheels
- No break-in required
- Rotor-friendly with proven longer rotor life
- Perfect upgrade for all braking systems
- Made in the USA
Carquest Standard – Brake Pads: Reliable and Dependable Stopping (Part No.MKD711)
from
$41.99
Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price.
Product Features:
See More
Product Features:
- Dependable stopping power
- Single layer shim for quiet braking
- OE-designed slots and chamfers to reduce noise and vibration
- Powder-coated backing plate prevents corrosion
Carquest Wearever – Brake Shoes (Part No.S357)
from
$45.49
Wearever brake shoes are 100% new OE replacement brake shoes and come with coated steel to guard against rust, salt and road grime. Wearever brake shoes provide exceptional stopping power, virtually noise free and exact fitment to the original equipment brake shoes.
Product Features:
See More
Product Features:
- Wearever Brake Shoes come bonded or riveted based on OE design.
- Wearever Brake Shoes are coated to prevent rust.
- Wearever Brake Shoes are 100% New not remanufactured.
- Brand may vary by location
Wagner – ThermoQuiet Semi-Metallic Disc Brake Pad Set (Part No.MX711)
from
$25.00
Wagner TQ® brake pads feature a zero-copper friction formulation and a unique Integrally Molded Insulator (IMI™) technology for quieter operation.
Product Features:
See More
Product Features:
- QUIET PERFORMANCE — Semi-metallic friction material engineered in-house to allow quiet operation and high performance
- EXCEPTIONAL BRAKING POWER — Advanced friction formulations dissipate heat for superior braking performance
- ONE-PIECE DESIGN — IMI™ technology integrates friction material, backing plate and insulator into the brake pad for select applications
- HARDWARE INCLUDED — Premium stainless-steel hardware included for select applications
- COMPREHENSIVE COVERAGE — Brake pads available for all vehicle types
- ZERO COPPER FORMULATION — Features Wagner OE25™ zero-copper friction formulation
Akebono ProAct – Ceramic Brake Pads Ultra-Premium (Part No.ACT711)
from
$78.99
Product Features:
See More
- Made in the USA
- OE Manufacturer
- Ceramic Brake Pad
- Low Dust
- Powerful Quiet Stopping
- Ultra-Premium
- Perfect Upgrade for all Braking Systems
Carquest Premium Gold – Semi-Metallic Brake Pads – (4-Pad Set) (Part No.GMKD711)
from
$54.99
Carquest Premium Gold brake pads are original equipment replacement brake pads that provide consistent, quiet, and clean braking.
Product Features:
See More
Product Features:
- Application-specific formulations designed for extended pad life and clean wheels
- Multi-layer shim for near silent braking
- OE designed slots and chamfers for consistent performance
- Hardware included on popular and late-model applications
Carquest Standard – Brake Pads : Front, Reliable and Dependable Stopping (Part No.MKD50)
from
$31.99
Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price.
Product Features:
See More
Product Features:
- Dependable stopping power
- Single layer shim for quiet braking
- OE-designed slots and chamfers to reduce noise and vibration
- Powder-coated backing plate prevents corrosion
Carquest Wearever – Brake Shoes (Part No.S33)
from
$40.99
Wearever brake shoes are 100% new OE replacement brake shoes and come with coated steel to guard against rust, salt and road grime. Wearever brake shoes provide exceptional stopping power, virtually noise free and exact fitment to the original equipment brake shoes.
Product Features:
See More
Product Features:
- Wearever Brake Shoes come bonded or riveted based on OE design.
- Wearever Brake Shoes are coated to prevent rust.
- Wearever Brake Shoes are 100% New not remanufactured.
- Brand may vary by location
Carquest Premium Gold – Ceramic Brake Pads – (4-Pad Set) (Part No.GNAD711)
from
$55.99
Carquest Premium Gold brake pads are original equipment replacement brake pads that provide consistent, quiet, and clean braking.
Product Features:
See More
Product Features:
- Application-specific formulations designed for extended pad life and clean wheels
- Multi-layer shim for near silent braking
- OE designed slots and chamfers for consistent performance
- Hardware included on popular and late-model applications
Akebono – Pro-ACT Ultra-Premium OE Ceramic Brake Pads (Part No.N1010131894AKE)
from
$116.40
For replacement brake pads that are designed for your vehicle, trust the name that manufacturers trust Akebono Pro-ACT® Ultra-Premium brake pads. Manufactured from carefully selected materials designed to help minimize and/or virtually eliminate unwanted brake dust, Pro-ACT Ultra-Premium brake pads provide consistent, smooth stopping power across a wide range of driving conditions, including panic stops. Replacement Brake Pads from the Creators of Akebono Ceramic Technology® Engineered to eliminate noise, vibration, and harshness, Pro-ACT Ceramic Disc Brake Pads provide the ultimate braking experience. The best replacement for restoring OE ceramic pad performance, Pro-ACT Ceramic Disc Pads are also ideal for upgrading from conventional pads. In addition to dramatically quieter braking, Pro-ACT Ceramic Pads provide best-in-class braking performance, including enhanced initial effectiveness (no break-in required), high resistance to fade, consistent brake pedal feel, and ultra-low dusting for cleaner wheels and tires. Akebono’s ceramic technology also causes minimal wear on brake rotors.
Product Features:
See More
Product Features:
- Virtually eliminates noise, vibration, and harshness (NVH)
- Vehicle-optimized ceramic formulas for superior performance
- Unrivaled stopping power
- Clean wheels
- No break-in required
- Rotor-friendly with proven longer rotor life
- Perfect upgrade for all braking systems
- Made in the USA
Popular 1953 Ford F-250 Pickup Brake Parts Categories
1953 Ford F-250 Pickup Brake Parts
You count on your 1953 Ford F-250 Pickup to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Brake Parts. With 8 Brake Parts ranging in price from $15.99 to $97.99, you’re sure to find everything you need for your 1953 Ford F-250 Pickup.
Brands matter. If you want to shop a specific Brake Parts brand, we stock 3 different brands like Cardone, Carquest, and Wearever. 1953 Ford F-250 Pickup Brake Parts start as low as $15.99!
One of the best ways to find top quality OEM or aftermarket Brake Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 38 extensive product reviews on 1953 Ford F-250 Pickup Brake Parts.
Did we mention you can order your Brake Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Brake Parts inventory for your 1953 Ford F-250 Pickup below to get started!
Top-Rated Brake Parts Brands For Your 1953 Ford F-250 Pickup
Trusted Brake Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1953 Ford F-250 Pickup running right for years to come. In our inventory you’ll find brands like Cardone, Carquest, Wearever, and even more.
Popular Cardone Brake Parts
You’ll find popular Cardone brand products across Brake Master Cylinders. All are waiting to get your 1953 Ford F-250 Pickup back on the road. Some of the top-rated Cardone products in these categories are:
FAQs for 1953 Ford F-250 Pickup Brake Parts
What are the most purchased Brake Parts for the 1953 Ford F-250 Pickup?
Out of 8 Brake Parts for the 1953 Ford F-250 Pickup, the most popular in our inventory are:
