1952 Ford Victoria Ignition and Tune-Up Products

Below you will find various in-demand Ford Ignition and Tune-Up Products, components and accessories for your 1952 Victoria. Advance Auto Parts has popular Victoria parts like Ignition Kits, Ignition Coils and Boots, Ignition Wires and more. You’ll also find aftermarket and OEM Ignition and Tune-Up Products for other Victoria model years including 1955, 1956, 1957, 1958, 1959, 1960, 1962, 1963, 1964 and more. Select a category of 1952 Ford Victoria Ignition and Tune-Up Products below and start saving instantly.

Popular 1952 Ford Victoria Ignition and Tune-Up Products Categories

Spark Plugs

Ignition Coils

Distributors

Optional Spark Plug Wires

Ignition Conversion Kits

Distributor Cap Kits

Distributor Rotor Buttons

Points and Condensers and Kits

Essential Ignition and Tune-Up Products for 1952 Ford Victorias

from

$499.99

Mechanical advance distributor calibrated for maximum performance with adjustable feature-dual point ignition. Dual point stabilized contact points eliminate point float and bounce to increase coil output. Get maximum performance at any RPM.

Product Features:

Brass Case Eliminate Corrosion
Insulation Prevent Leakage
Self-Lubricating Bushings
Material Prevents Shorts And Arcing
Maximum Conductivity
Maximum Performance At Any RPM
Fine Tune The Advance Curve
Eliminate Point Float

from

$140.99

Carquest Premium distributors are built to meet or exceed the original equipment (OE) specifications for each application. Our distributors are built by a manufacturer that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each distributor is supplied with the cap, rotor and any seals needed for installation. Carquest Premium distributors are 100% new and undergo extensive validation testing to ensure long-lasting ignition performance and reliability.

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
100% new unit with no core charges
Precision machined shafts result in high speed accuracy and help prevent bearing failures
Every distributor is tested to ensure reliable and long-lasting performance
O-rings or gaskets included where applicable
Precision Engineered ignition modules and plugs ensure proper performance plus precise connection.
Precision machined and ground shafts assure high speed accuracy and prevent bearing failures.
Original Equipment Equivalent high voltage ignition coils.
100% New Components and fasteners eliminate premature failures.

from

$538.99

Unilite Electronic Ignition Distributor Series 37

from

$11.79

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

High-quality products that meet OE appearance and performance to

from

$13.29

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$42.99

Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provides cooler operating temperatures.

Product Features:

Made from hi-performance 60 KV rated alkyd molding compound.
Cap and rotor kits include nylon rotor hold-down screws.
Flame-Thrower dust covers provide a larger air gap around the coil.

from

$35.49

Carquest ignition coils meet original equipment (OE) fit, form and function and are built to ensure reliable starting and performance. Carquest ignition coils are tested to ensure proper spark and perfect fit for each application. These ignition coils are an affordable repair choice to restore the vehicle’s ignition system performance. Carquest ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Long service life and durable performance
High dielectric strength for reliability
Corrosion-resistant connections
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
High reliability
Long service life

from

$16.49

Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure confidence and product reliability, every time.

from

$34.49

Carquest Ignition Coils ensure fast starts, consistent engine performance and optimized fuel efficiency at an affordable cost.

Product Features:

High output
Long spark duration
High dielectric strength
Corrosion resistant connections
High reliability
Long service life

from

$369.99

Ignition Conversion Kit

from

$154.99

The original Ignitor module is ideal for restorations. Ignitor Module Kits are extremely easy to install and fit into your original distributor to maintain your stock look. No additional ignition box is required keeping a clean look under the hood. Ignitors are available for most distributors that came with mechanical breaker points and will cover AUTOMOTIVE, MARINE, INDUSTRIAL and AGRICULTURE applications.

Product Features:

Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
2:1 improvement over “points” in current fall time for increased coil output.
Rotating cobalt magnets trigger a Hall Effect integrated circuit; no points to burn; no moving parts to wear out.
Epoxy molding makes our module impervious to dirt, oil, grease and moisture.
Stable timing; no need for any adjustments.
Pair with a Flame Thrower Canister Coil for optimal performance
Legal in all 50 states and Canada (C.A.R.B. E.O. No. D-57-22)

from

$102.99

Put and end to high maintenance point ignition systes by utilizing a specialized electronic circuitry and infrared signal. Stabalizes ignition timing from 1 to 10,000 RPM. Improves performance and fuel efficiency, easy to install with hand tools, reduces maintenance. It is built with the latest thermal clad based surface mount construction for maximum dependability and long life.

Product Features:

Put And End To High Maintenance Point Ignitions
Specialized Electronic Circuitry
Stabalizes Ignition Timing From 1 To 10000 RPM
Improves Performance And Fuel Efficiency
Easy To Install With Hand Tools
Thermal Clad Based Surface Mount Construction
Utilizes Specialized Electronic Circuitry
Ignition Timing Is Stable From 1 To 10000rpm

from

$128.99

These ACCEL carbon and graphite core wire sets virtually eliminate RFI noise, while providing maximum conductivity for ultimate performance in any race or street application. Double silicon insulation eliminates leakage and misfire.

Product Features:

Heavy Duty 8.8mm Oversized Silicone Jacket
500 Ohms/ft. Of Resistance
550 Degree Double Silicone Construction
Fiberglass Braid
Carbon/Graphite Core
Magnetic Suppression
Fiberglass/Kevlar Core
500 Ohms Resistance

from

$82.99

Most modern electronic ignition systems require suppression style wires to preserve sensitive components. Flame-Thrower 8mm Custom fit MAGx2 wires provide enhanced RFI suppression and dual current paths for more power delivered to the spark plug. Our custom wire sets have factory terminated ends for a superior connection and perfect fit, without cutting, crimping and splicing.

Product Features:

Two current paths for reliability and redundancy. -Primary path: Spiral wound stainless steel alloy.-Secondary path: Carbon impregnated fiberglass center core.
Low 500 ohm per foot resistance.
8mm Silicone jacket to resist high temperatures, moisture, oil and chemicals.
EPDM (Ethylene Propylene Diene Methylene) inner insulation for superior heat resistance and prevention of arcing and voltage leaks.
Fiberglass reinforcing braid for added strength and flexibility.

from

$143.99

Set includes terminals for engines with early type (socket) and late type (HEI spark plug top) distributor caps. 90 degree boots and terminals factory installed on one end.

Product Features:

Extra Long 8.5mm Wires So You Can Cut To Your Designed Length
Incl. both socket-style and spark plug-style boots and terminals
Includes Mini-Stripper-Crimper For Factory Style Crimps
Size Includes [6] 90 Deg. Boots/Terminals
Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately

from

$133.99

Features at a glance, low 300 Ohm resistance spiral core delivers high energy output for maximum spark at the plug. Great RFI suppression meets the demands of today’s on-board electronics, such as electronic ignition, sound systems, and computer controls. 8MM ozone-resistant red silicone jacket repels water, oil, grease, and fuel, and withstands temperatures up to 500 degrees. Fits V8, universal wire kit: includes 45 degree spark plug boots, female socket (standard) distributor boots and terminals.

Product Features:

Most Advanced Wire By Mallory
RFI Suppression
High Temperature Silicone Jacket
Withstands Over 500+F
Come In Ready To Use Kits
Extra Long Kits

from

$14.99

from

$8.79

Ignition Condenser

from

$8.05

Driveworks® offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.

Product Features:

Direct-fit OE replacement ensures ease of installation
Designed to meet OE performance
As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need

from

$14.99

from

$3.49

With over 100 years of engineering expertise and more than 11 billion plugs sold, Autolite continues to set the standard in spark plug technology. Designed and engineered in the USA, these spark plugs feature a copper-glass seal that bonds the insulator, terminal post, and center electrode together, ensuring full required voltage at the spark gap with a 100% leak-proof, gas-tight seal. The multi-rib insulator reduces the risk of flash-over, while the one-piece terminal post adds strength and durability. Additionally, the built-in resistor minimizes radio frequency interference (RFI) and electrode erosion, making these plugs a reliable choice for any vehicle. The tapered seat type further enhances the plug’s performance, providing quick starts, good fuel economy, and smooth acceleration.

Product Features:

Copper-glass seal bonds insulator, terminal post center electrode together; assures full required voltage at spark gap; gas-tight seal (100% leak proof)
Multi-rib insulator reduces danger of “flash-over”
One-piece terminal post adds strength
Resistor reduces radio frequency interference (RFI) and electrode erosion
Quick Starts and Smooth Acceleration: Designed to provide quick engine starts and smooth acceleration, enhancing overall driving performance.
Good Fuel Economy: Engineered to optimize fuel efficiency, helping you save on fuel costs.

from

$2.79

This Champion spark plug features a copper core electrode that provides increased conductivity and heat control for good overall wear. Built to ISO and SAE standards, it offers dependable performance and durability. The OE type replacement plug resists fouling and boasts superior corrosion resistance. Its copper core center electrode allows for accurate control of heat range for longer life, while the nickel center electrode tip material ensures consistent performance. The flat seat type and resistor type design further enhance its reliability.

Product Features:

Copper Plus – Dependable Performance and Durability
OE type replacement plug
Resists fouling
Copper core center electrode allows for accurate control of heat range for longer life
Superior corrosion resistance
Built to ISO and SAE standards for proven performance
Enhanced Conductivity and Heat Control: The Champion Copper Plus Small Engine Spark Plug features a copper core electrode that ensures increased conductivity and effective heat control, promoting good overall wear.
Consistent Performance: With a nickel center electrode tip material and a flat seat type, this resistor type spark plug ensures consistent and reliable performance for small engines.

from

$3.79

Dependable performance. This Champion® spark plug features a copper core electrode that provides increased conductivity and heat control for good overall wear.

Product Features:

Copper Plus – Dependable Performance and Durability
Copper core center electrode allows for accurate control of heat range for longer life
Superior corrosion resistance
Built to ISO and SAE standards for proven performance
Built to ISO and SAE standards for proven performance

from

$7.29

The Motorcraft Spark Plug is a high-quality replacement spark plug designed to provide reliable performance and long-lasting durability for your vehicle. It features a nickel alloy electrode that provides superior wear resistance and a platinum tip that ensures consistent performance over the life of the plug. The Motorcraft Spark Plug also has a ribbed insulator design that helps prevent misfires and a copper core that provides efficient heat transfer. It is designed to meet or exceed OEM specifications and is compatible with a wide range of vehicles. Whether you’re looking to replace worn-out spark plugs or upgrade to a higher-quality option, the Motorcraft Spark Plug is an excellent choice that will help keep your engine running smoothly and efficiently.

from

$9.99

BWD SELECT designs, specifies, and manufactures replacement parts with one goal in mind-make them the very best. To maximize performance and longevity, we use the finest materials and improve on OE specifications, whenever possible.

Product Features:

High-quality direct replacement electrical connector allows you to replace only the damaged connector instead of the entire harness for a cost-effective repair
The terminal is manufactured with high grade materials such as copper alloy, brass, and phosphor bronze. The housing is fabricated using polyamide resins. All of the materials together provide the connectors with prolonged life and superior performance.
All electrical connectors are 100% tested for proper mechanical and electrical fit, form and function
Offering thousands of high-quality pigtails & sockets for nearly every electrical job

from

$12.99

from

$4.29

from

$3.49

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

High-quality products that meet OE appearance and performance to

Upgrade your 1952 Ford Victoria with Top-Quality Ignition and Tune-Up Products

When it comes to maintaining or upgrading your 1952 Ford Victoria, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Ignition and Tune-Up Products are key to keeping your Victoria functioning at its best. At Advance Auto Parts, we offer a wide selection of 28 Ignition and Tune-Up Products for the 1952 Ford Victoria, designed to meet your needs without breaking the bank. From Ignition Kit replacements to Ignition Coils and Boots upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Ignition and Tune-Up Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Ignition and Tune-Up Products for your 1952 Ford Victoria at great prices. Our Ignition and Tune-Up Products inventory for this model ranges from just $2.29 to $499.99, with an average price of $93.04. Our 28 Ignition and Tune-Up Products in stock come from 9 trusted brands, so you’re sure to find the right part for your 1952 Ford Victoria without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1952 Ford Victoria, we stock popular OEM and aftermarket Ignition and Tune-Up Products from top names like Autolite Champion, and more. Autolite Ignition and Tune-Up Products start at just $3.99 and boast an impressive 5 stars average rating from customers. With 33 customer reviews and counting, our 1952 Ford Victoria Ignition and Tune-Up Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Ignition and Tune-Up Product upgrades. Explore related part types like Fluids and Chemicals, Alternators and Starters and more to make sure your 1952 Ford Victoria is always ready to roll. We’re committed to providing you with everything you need to keep your Victoria in top shape, all in one place. Start shopping confidently below for your 1952 Ford Victoria!

Best-Selling Ignition Kits for 1952 Ford Victorias

Enhance the driving experience in your Ford with 9 quality Ignition Kit components, starting at $11.99.

show more show less

from

$11.99

from

$154.99

Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
2:1 improvement over “points” in current fall time for increased coil output.
Rotating cobalt magnets trigger a Hall Effect integrated circuit; no points to burn; no moving parts to wear out.
Epoxy molding makes our module impervious to dirt, oil, grease and moisture.
Stable timing; no need for any adjustments.
Pair with a Flame Thrower Canister Coil for optimal performance
Legal in all 50 states and Canada (C.A.R.B. E.O. No. D-57-22)

from

$432.99

Ignition Conversion Kit

from

$309.99

Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
2:1 improvement over “points” in current fall time for increased coil output.
Rotating cobalt magnets trigger a Hall Effect integrated circuit; no points to burn; no moving parts to wear out.
Epoxy molding makes our module impervious to dirt, oil, grease and moisture.
Stable timing; no need for any adjustments.
Pair with a Flame Thrower Canister Coil for optimal performance
Legal in all 50 states and Canada (C.A.R.B. E.O. No. D-57-22)

from

$209.99

Ignition Conversion Kit

from

$195.99

The Ignitor II provides increased starting voltage with adaptive dwell control. Ignitor Module Kits are extremely easy to install and fit into your original distributor to maintain your stock look. No additional ignition box is required keeping a clean look under the hood. Ignitors are available for most distributors that came with mechanical breaker points and will cover AUTOMOTIVE, MARINE, INDUSTRIAL and AGRICULTURE applications.

Product Features:

Adaptive dwell maintains peak energy throughout the entire RPM range, reducing misfires while improving engine performance.
Develops on average 4 times more available energy between 3000 and 5000 RPM, and 2 times more available plug voltage.
Compensates for inherent electronic delay by adjusting the spark timing throughout the entire RPM range.
Synchronized peak current and spark timing reduces heat build-up.
Senses startup and develops more energy for quicker, easier starting.
Pair with a Flame Thrower Canister Coil for optimal performance
Legal in all 50 states and Canada (C.A.R.B. E.O. No. D-57-22)

from

$154.99

Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
2:1 improvement over “points” in current fall time for increased coil output.
Rotating cobalt magnets trigger a Hall Effect integrated circuit; no points to burn; no moving parts to wear out.
Epoxy molding makes our module impervious to dirt, oil, grease and moisture.
Stable timing; no need for any adjustments.
Pair with a Flame Thrower Canister Coil for optimal performance
Legal in all 50 states and Canada (C.A.R.B. E.O. No. D-57-22)

from

$154.99

Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
2:1 improvement over “points” in current fall time for increased coil output.
Rotating cobalt magnets trigger a Hall Effect integrated circuit; no points to burn; no moving parts to wear out.
Epoxy molding makes our module impervious to dirt, oil, grease and moisture.
Stable timing; no need for any adjustments.
Pair with a Flame Thrower Canister Coil for optimal performance
Legal in all 50 states and Canada (C.A.R.B. E.O. No. D-57-22)

from

$139.99

Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
2:1 improvement over “points” in current fall time for increased coil output.
Rotating cobalt magnets trigger a Hall Effect integrated circuit; no points to burn; no moving parts to wear out.
Epoxy molding makes our module impervious to dirt, oil, grease and moisture.
Stable timing; no need for any adjustments.
Pair with a Flame Thrower Canister Coil for optimal performance
Legal in all 50 states and Canada (C.A.R.B. E.O. No. D-57-22)

Most Popular 1952 Ford Victoria Ignition Coils and Boots

Customize your Ford with 2 Ignition Coils and Boots products like Ignition Coils, all priced under $23.05.

show more show less

from

$23.05

BWD® is an aftermarket leader, providing a premium line of engine management products. BWD® manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD® is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:

Manufactured using high-quality materials to provide superior durability and long service life
Designed and engineered to ensure precise performance
A full E-Lam core of silicon steel and solid brass high voltage terminals protects against corrosion. Our ignition coils are built for maximum output voltage
Primary and Secondary windings feature enamel magnet wire for the highest temperature rating in the aftermarket
As a tier I manufacturer with engineering and design capabilities second to none, our ignition coils are made to the highest quality standards

from

$16.49

Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure confidence and product reliability, every time.

Top Picks for 1952 Ford Victoria Ignition Wires

Upgrade Ford Victorias with top-quality Ignition Wires parts, including 3 OEM and aftermarket selections for your 1952 model.

show more show less

from

$153.99

Most Advanced Wire By Mallory
RFI Suppression
High Temperature Silicone Jacket
Withstands Over 500+F
Come In Ready To Use Kits
Extra Long Kits

from

$133.99

Most Advanced Wire By Mallory
RFI Suppression
High Temperature Silicone Jacket
Withstands Over 500+F
Come In Ready To Use Kits
Extra Long Kits

from

$82.99

Two current paths for reliability and redundancy. -Primary path: Spiral wound stainless steel alloy.-Secondary path: Carbon impregnated fiberglass center core.
Low 500 ohm per foot resistance.
8mm Silicone jacket to resist high temperatures, moisture, oil and chemicals.
EPDM (Ethylene Propylene Diene Methylene) inner insulation for superior heat resistance and prevention of arcing and voltage leaks.
Fiberglass reinforcing braid for added strength and flexibility.

In-Demand Distributors for 1952 Ford Victorias

Select from 6 premium Distributors parts for your 1952 Ford Victoria, with prices ranging from $12.99 to $499.99.

show more show less

from

$13.29

from

$12.99

from

$18.79

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

High-quality products that meet OE appearance and performance to

from

$21.99

from

$499.99

The industry standard with adjustable mechanical advance curve. Triggered by photo-optic infrared LED system. Improved combustion efficiency and economy, increased spark plug life and cold weather starting, and maintenance free operation.

Product Features:

Improved Combustion And Economy
Increased Spark Plug Life
Improved Cold Weather Starting
Maintenance Free Operation
Accurate Spark Timing
Self-Lubricating Bushings
Years Of Trouble-Free Service

from

$499.99

Brass Case Eliminate Corrosion
Insulation Prevent Leakage
Self-Lubricating Bushings
Material Prevents Shorts And Arcing
Maximum Conductivity
Maximum Performance At Any RPM
Fine Tune The Advance Curve
Eliminate Point Float

Most Sold 1952 Ford Victoria Spark Plugs

Explore our best-selling Ford parts for the 1952 Victoria among 8 OEM and aftermarket options starting from $2.29.

show more show less

from

$2.99

Dependable performance. This Champion® spark plug features a copper core electrode that provides increased conductivity and heat control for good overall wear.

Product Features:

Copper Plus – Dependable Performance and Durability
OE type replacement plug
Resists fouling
Copper core center electrode allows for accurate control of heat range for longer life
Superior corrosion resistance
Built to ISO and SAE standards for proven performance

from

$2.29

Dependable performance. This Champion® spark plug features a copper core electrode that provides increased conductivity and heat control for good overall wear.

Product Features:

Copper Plus – Dependable Performance and Durability
OE type replacement plug
Resists fouling
Copper core center electrode allows for accurate control of heat range for longer life
Superior corrosion resistance
Built to ISO and SAE standards for proven performance

from

$4.49

NGK Standard spark plugs (in the iconic NGK ‘yellow box’ packaging) are a proven OE cornerstone and technology customers have relied on for decades. Engineered specifically for OE applications, NGK Standard spark plugs provide OE quality nickel alloy reliable performance and design. NGK’s legendary high grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance, while triple gasket sealing prevents combustion gas leakage. Solid 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges. Trivalent metal plating ensures superior anti-corrosion and anti-seizing properties.

Product Features:

ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction nickel alloy center electrode provides consistent performance
RECOMMENDED USAGE: Best for vehicles with OE nickel alloy plugs, not recommended on vehicles with factory precious metal plugs
NGK’s OE CERAMIC TECHNOLOGY: High grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance
SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal

from

$3.99

Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Designed and engineered in the USA, Autolite Double Platinum spark plugs feature platinum-to-platinum firing which virtually eliminates gap erosion, reduces misfires and increases durability of the plug. Consider upgrading to Autolite Iridium XP spark plugs for increased performance.

Product Features:

Copper-glass seal bonds insulator, terminal post center electrode together; assures full required voltage at spark gap; gas-tight seal (100% leak proof)
Multi-rib insulator reduces danger of “flash-over”
One-piece terminal post adds strength
Resistor reduces radio frequency interference (RFI) and electrode erosion

from

$2.49

Dependable performance. This Champion spark plug features a copper core electrode that provides increased conductivity and heat control for good overall wear.

Product Features:

Resists fouling
Superior corrosion resistance
Dependable and proven performance
Increased conductivity and heat control for good overall wear

from

$3.29

ACDelco Professional Conventional Spark Plugs are designed for reliability and efficient performance, and are a high quality replacement for many vehicles on the road today. Their high-quality copper cores and outstanding suppression characteristics deliver reliable performance. They are also available for Marine applications. These premium aftermarket replacement spark plugs are manufactured to meet your expectations for fit, form, and function.

Product Features:

Black Onyx coating helps reduce corrosion
Copper core provides great heat transfer and helps maximize plug durability
Ribbed suppressor seal extends resistance and helps prevent spark ‘flash over’ and misfires
Nickel-chrome alloy sheathing helps prevent corrosion on center electrode
Available for use in Marine applications

from

$7.49

SPARK PLUG

from

$2.50

Motorcraft Original Equipment Copper Core spark plugs are designed, engineered and recommended by Ford Motor Company.

Product Features:

Same part installed when the engine rolled off the assembly line
Designed to deliver quick starts, enhanced fuel economy and smooth acceleration

Top-Rated Ignition and Tune-Up Products Brands For Your 1952 Ford Victoria

Shop for the best-rated brands offering Ignition and Tune-Up Products and other products for your 1952 Ford Victorias. Below you’ll find some of our best rated Ignition and Tune-Up Products from Autolite and Champion, and more. Ignition and Tune-Up Products from these brands that fit a 1952 Victoria start at just $2.29 and are rated as high as 5 stars. OEM and aftermarket Ignition and Tune-Up Products don’t get more top quality, durable, and affordable than from the brands below.

Popular Autolite 1952 Ford Victoria Ignition and Tune-Up Products

When it comes to maintaining or upgrading your 1952 Ford Victoria, using quality Ignition and Tune-Up Products is essential to ensure durability and a perfect fit. Autolite ticks all of those boxes. We offer a wide selection of Autolite Ignition and Tune-Up Products, specifically designed for the 1952 Ford Victoria. With over 1 Autolite brand Ignition and Tune-Up Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $3.99. Plus, with over 9 customer reviews and an average rating of 5 stars, you can trust that our Autolite Ignition and Tune-Up Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$3.99

(9)

Copper Spark Plug: Delivers Quick Starts, Good Fuel Economy, Smooth Acceleration

“Perfect plugs for my 1957 Ford tractor”

Popular Champion 1952 Ford Victoria Ignition and Tune-Up Products

Champion auto parts is one of the highest quality Ignition and Tune-Up Product brands in the market. Any 1952 Ford Victoria owner should feel confident when installing genuine Champion parts in their vehicle. To ensure the best fit and performance for your 1952 Victoria, Advance Auto Parts carries a full inventory of 3 Champion Ignition and Tune-Up Products. Plus you will be keeping your Ford in peak condition while saving money because prices on these Champion Ignition and Tune-Up Products range from $2.29 to $2.99, plus, with more than 5 customer reviews and an impressive 5 stars average rating, you can be confident the Fram Ignition and Tune-Up Products below will deliver on both quality and value.

from
$2.29

(2)

Copper Plus Small Engine Spark Plug Dependable Performance, OE Replacement RH10C

“Exact and better plug than the o.e.m. version”

from
$2.99

(3)

Copper Plus Small Engine Spark Plug Dependable Performance, OE Replacement H10C

“For a 12 hp Kohler engine.”

from
$2.49

This product is not rated

Champion Copper Plus Small Engine- Single Card – H10C

“”

FAQs for 1952 Ford Victoria Ignition and Tune-Up Products

Which Ignition and Tune-Up Products are best-sellers for 1952 Ford Victorias?

Out of 28 Ignition and Tune-Up Products that fit 1952 Ford Victorias, the following parts are the top sellers:

Champion Copper Plus Small Engine- Single Card – H10C (18470672) – $2.49
OE Series Standard Nickel Spark Plug: Conventional Tip Design, B-6L (19650315) – $4.49
Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (12413133) – $16.49

What’s the price range for 1952 Ford Victoria Ignition and Tune-Up Products?

Ignition and Tune-Up Product prices for the 1952 Ford Victoria start at $2.29 and go up to $499.99 for the most premium parts.

What’s the average price of a Ignition and Tune-Up Product for a 1952 Ford Victoria?

The average price for Ignition and Tune-Up Products for the 1952 Ford Victoria is $93.04. Keep in mind the variety of part types within our Ignition and Tune-Up Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Ignition and Tune-Up Products for other Ford Victoria model years?

Yes, we currently carry Ignition and Tune-Up Products for 12 model years of Ford Victorias between 1951 and 1964. Ignition and Tune-Up Products are bought most frequently for the following model years: 1964, 1963, 1962, 1960, 1959, 1958, 1957, 1956, and 1955.

What are the cheapest Ignition and Tune-Up Products for my 1952 Ford Victoria?

The cheapest 1952 Ford Victoria Ignition and Tune-Up Products we carry in stock are:

Copper Plus Small Engine Spark Plug Dependable Performance, OE Replacement RH10C (12013920) – $2.29
Champion Copper Plus Small Engine- Single Card – H10C (18470672) – $2.49
Original Equipment Copper Core Spark Plug (11582539) – $2.50
Copper Plus Small Engine Spark Plug Dependable Performance, OE Replacement H10C (18470215) – $2.99
Copper Core Spark Plug: Original Equipment Replacement (11400046) – $3.29

What are the top-rated Ignition and Tune-Up Products that fit the 1952 Ford Victoria?

Out of 33 reviews by customers, our 1952 Ford Victoria Ignition and Tune-Up Products have an average customer rating of . These are some of the highest-rated Ignition and Tune-Up Product types for the 1952 Ford Victoria and their top-rated products:

Ignition Wires
- Mallory Prosidewinder 135F Univ/Wire Set (17370010) – $153.99
- Mallory Prosidewinder 90F Univ. Wire Set (17350051) – $133.99
Ignition Coils and Boots
- Mallory Prosidewinder 135F Univ/Wire Set (17370010) – $153.99
- Mallory Prosidewinder 90F Univ. Wire Set (17350051) – $133.99
Spark Plugs
- Mallory Prosidewinder 135F Univ/Wire Set (17370010) – $153.99
- Mallory Prosidewinder 90F Univ. Wire Set (17350051) – $133.99

What types of Ignition and Tune-Up Products do you sell for my 1952 Ford Victoria?

As of 2/5/25, these are some of the most in-demand types of Ignition and Tune-Up Products for a 1952 Ford Victoria:

Can I get help with 1952 Ford Victoria Ignition and Tune-Up Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Ignition and Tune-Up Products and more.

What is your return policy for Ford Victoria Ignition and Tune-Up Products?

Advance Auto Parts keeps returns simple. For new Ford Victoria Ignition and Tune-Up Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1952 Ford Victoria Ignition and Tune-Up Products

Mallory – Mallory Dual Point: 8-Ba Ford Flathead (Part No.2527501)

Carquest Premium – Distributor T2807: 100% New, With Cap and Rotor (Part No.T2807)

Mallory – Unilite Electronic Ignition Distributor Series 37 (Part No.3755101)

Carquest – Distributor Cap (Part No.24C1021)

Carquest Premium – Distributor Cap (Part No.CAC1066)

PerTronix – D4002 Flame-Thrower HEI Distributor Cap and Rotor Kit Blue (Part No.D4002)

Carquest – Ignition Coil: Meets OE Specifications, 1 Count (Part No.26C1041)

Carquest Premium – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.EBC1521)

Carquest – Ignition Coil (Part No.26C1078)

Carquest Premium – Ignition Conversion Kit (Part No.CBA1704)

PerTronix – 1282P6 Ignitor Ford 1954-56 8 cyl 6 Volt Positive Ground (Part No.1282P6)

Accel – Kit:Ford V8Sngl Pnt Eliminator (Part No.2020)

Accel – Universal Fit Graphite Suppression; Spark Plug Wire Set (Part No.8026)

PerTronix – 808480 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 180 Degree Red (Part No.808480)

MSD Ignition – Wire Set; Super Conductor; Multi-Angle Plug; Socket/HEI (Part No.31179)

Mallory – Mallory Prosidewinder 90F Univ. Wire Set (Part No.937)

Carquest Premium – Ignition Condenser (Part No.GAA1034)

Carquest Premium – Ignition Condenser (Part No.GAA1251)

Driveworks – Contact Set (Points) (Part No.12002)

Carquest Premium – Ignition Contact Set (Part No.AKA1001)

Autolite – Copper Spark Plug: Delivers Quick Starts, Good Fuel Economy, Smooth Acceleration (Part No.45)

Champion – Copper Plus Small Engine Spark Plug Dependable Performance, OE Replacement RH18Y (Part No.857)

Champion – Copper Plus Spark Plug: Dependable Performance, OE Replacement, RF11YC (Part No.22)

Motorcraft – Spark Plug (Part No.SP-549-X)

Carquest – Distributor Rotor (Part No.D198)

Carquest Premium – Distributor Rotor (Part No.DAA1009)

Carquest Premium – Distributor Rotor (Part No.DAA1002)

Carquest – Distributor Rotor (Part No.23A1015)

Carquest Premium – Ignition Condenser (Part No.GAA1037)

PerTronix – 1283P12 Ignitor Ford 1949-53 8 cyl 12 Volt Positive Ground (Part No.1283P12)

Carquest Premium – Ignition Conversion Kit (Part No.CBA1803)

PerTronix – LU-186 Ignitor Lucas 8 cyl (Part No.LU-186)

Carquest Premium – Ignition Conversion Kit (Part No.CBA1757)

PerTronix – 91283 Ignitor II Adaptive Dwell Control Ford 8 cyl (Part No.91283)

PerTronix – 1283N6 Ignitor Ford 1949-53 8 cyl 6 Volt Negative Ground (Part No.1283N6)

PerTronix – 1283P6 Ignitor Ford 1949-53 8 cyl 6 Volt Positive Ground (Part No.1283P6)

PerTronix – 1283 Ignitor Ford 1949-53 8 cyl (Part No.1283)

Carquest – Ignition Coil (Part No.E5)

Carquest Premium – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.EBC1521)

Mallory – Mallory Prosidewinder 135F Univ/Wire Set (Part No.947)

Mallory – Mallory Prosidewinder 90F Univ. Wire Set (Part No.937)

PerTronix – 808480 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 180 Degree Red (Part No.808480)

Carquest Premium – Distributor Cap (Part No.CAC1066)

Carquest Premium – Distributor Rotor (Part No.DAA1009)

Carquest – Distributor Cap (Part No.24C1029)

Carquest Premium – Distributor Cap (Part No.CAC1087)

Mallory – Malry Unilite Dist.: 49-53 Flathead Ford (Part No.3727501)

Mallory – Mallory Dual Point: 8-Ba Ford Flathead (Part No.2527501)

Champion – Copper Plus Small Engine Spark Plug Dependable Performance, OE Replacement H10C (Part No.844)

Champion – Copper Plus Small Engine Spark Plug Dependable Performance, OE Replacement RH10C (Part No.854)

NGK – OE Series Standard Nickel Spark Plug: Conventional Tip Design, B-6L (Part No.3212)

Autolite – Copper Spark Plug: Delivers Quick Starts, Good Fuel Economy, Smooth Acceleration (Part No.216)

Champion – Champion Copper Plus Small Engine- Single Card – H10C (Part No.844-1)

ACDelco – Copper Core Spark Plug: Original Equipment Replacement (Part No.C45L)

Motorcraft – SPARK PLUG (Part No.SP-473-AX)

Motorcraft – Original Equipment Copper Core Spark Plug (Part No.F1000672458MTR)