1951 Ford Custom Ignition and Tune-Up Products

Name: Super Stock Elect Coil Chrome
Brand: Accel
SKU: 8145C
Price: 79.99 USD

Below you will find various in-demand Ford Ignition and Tune-Up Products, components and accessories for your 1951 Custom. Advance Auto Parts has popular Custom parts like Ignition Kits, Distributors, Ignition Wires and more. You’ll also find aftermarket and OEM Ignition and Tune-Up Products for other Custom model years including 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976 and more. Select a category of 1951 Ford Custom Ignition and Tune-Up Products below and start saving instantly.

Popular 1951 Ford Custom Ignition and Tune-Up Products Categories

Spark Plugs

Ignition Coils

Distributors

Optional Spark Plug Wires

Ignition Conversion Kits

Distributor Cap Kits

Distributor Rotor Buttons

Points and Condensers and Kits

Essential Ignition and Tune-Up Products for 1951 Ford Customs

from

$79.99

Excellent high performance coil for vehicles that have been converted from points to a breakerless electronic distributor or electronic ignition system, where a canister type oil filled can coil is preferred. Designed with optimized low resistance, high turns ratio windings to work specifically with ACCEL 41, 51, 52, 61 & 71000 Series breakerless electronic replacement distributors. Engineered for higher energy output resulting in quicker starting, improved throttle response and more high RPM power. Special crimped and soldered internal connections ensure positive contacts. High performance tan Alkyd tower provides “”flashover”” protection to primary terminals. Available in “”ACCEL Yellow”” or Chrome Plated can.

Product Features:

Engineered for higher energy output
Improved throttle responce
More high RPM power
Chrome Plated

from

$46.99

Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure confidence and product reliability, every time.

from

$33.99

Built by IATF 16949 certified manufacturers for consistent durability
Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
Segmented secondary bobbins to distribute high voltage and prevent shorting
100% end-of-line tested to ensure proper performance
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$5.99

The Double Platinum Spark Plug is engineered for exceptional durability and performance, making it a top choice for distributor-less ignition system (DIS) engines. Featuring a platinum-to-platinum design, it minimizes gap erosion and reduces misfires, ensuring a longer service life compared to copper and standard platinum plugs. Its yttrium-enhanced ground electrode delivers superior heat transfer, providing unmatched durability under high temperatures and pressure. The high alumina ceramic insulator optimizes thermal conductivity and dielectric strength, while the multi-rib insulator prevents flash-over for reliable operation. With a long projection center electrode and tapered seat type, this performance-grade spark plug is built to handle demanding conditions. Both the center and ground electrode tips are crafted from platinum, ensuring consistent ignition and enhanced efficiency. Designed to deliver superior functionality and durability, this spark plug is an excellent investment for maintaining peak engine performance.

Product Features:

Engineered with a platinum-to-platinum design that prevents gap erosion, extending the life of the spark plug.
The yttrium-Enhanced Ground Electrode delivers superior heat transfer that delivers more durability under high temps and pressure for greater life.
Its high alumina ceramic insulator provides optimum thermal conductivity and dielectric strength.
The multi-rib insulator prevents flash-over.
Designed with a tapered seat type and long projection center electrode to ensure reliable performance under demanding conditions.

from

$2.79

The Spark Plug: Quick Starts & Enhanced Fuel Economy by Motorcraft is the same high-quality part installed when your engine first rolled off the assembly line, ensuring a perfect fit and reliable performance. Designed and recommended by Ford Motor Company, these spark plugs are engineered to deliver quick starts, improved fuel economy, and smooth acceleration, making them an essential component for maintaining your vehicle’s peak performance. Featuring a tapered seat type, they provide a secure and precise fit, reducing the risk of leaks or misfires. Built to meet the highest standards of durability and efficiency, these spark plugs offer exceptional value by enhancing your engine’s performance and longevity. Whether you’re replacing worn-out plugs or performing routine maintenance, trust Motorcraft to keep your vehicle running smoothly.

Product Features:

Same part installed when the engine rolled off the assembly line
Designed to deliver quick starts, enhanced fuel economy and smooth acceleration
Engineered for a secure and precise fit with a tapered seat type, minimizing the risk of leaks or misfires.
Built to meet high durability standards, ensuring long-lasting performance and reliability.
Enhances engine longevity by maintaining optimal performance and efficiency.

from

$4.79

Standard Spark Plug (BSF82CA) delivers reliable performance and durability, making it the ideal choice for maintaining your vehicle’s original equipment standards. Engineered specifically for Ford, Lincoln, and Mercury vehicles, these spark plugs ensure an exact fit while enhancing durability, reducing misfires, optimizing emissions, and improving fuel efficiency. Resistant to oxidation and arc erosion, they are built with high-quality materials to withstand demanding conditions and provide service intervals of up to 100,000 miles. The multi-rib insulator design protects against misfires, while Motorcraft ignition components help prevent false check engine lights, giving you confidence in your vehicle’s performance. Backed by Motorcraft’s Service Parts Warranty, these spark plugs are the same trusted components found in your vehicle at the time of manufacture, ensuring reliable performance for a wide range of domestic and import cars and trucks.

Product Features:

Motorcraft spark plugs are matched to specific engines to provide enhanced durability, eliminate misfires, reduce fuel consumption and optimize emissions.
Backed by Motorcraft’s Service Parts Warranty
Exact fit for Ford, Lincoln and Mercury vehicles
Resistant to oxidation and arc erosion.
Multi-rib insulator protects against misfire.
Service intervals of up to 100,000 miles.
Motorcraft Spark Plugs are designed with high quality materials to provide reliable performance for almost any application.
Motorcraft Spark Plugs are what was in the vehicle when it was manufactured
Motorcraft ignition components help prevent false check engine lights.

from

$593.99

When you start making serious power with your EFI Ford, the stock distributor shaft is one of the weak links of the engine. These Pro-Billet models answer the need for an affordable replacement in a strong and great looking package. Each distributor starts as a solid billet that is secured into a state of the art computer numerical control (CNC) machine where it is transformed into a precision housing. Inside each housing there is a sealed ball bearing at the top of the shaft. This design is responsible for accurately guiding the oversized polished steel shaft throughout the entire RPM range of your engine. The shaft is also quip-coated for friction reduction and corrosion resistance. The Pro-Billet distributors use a stock-style trigger pick-up to accept factory connectors. For installation, you simply remove the stock distributor and bolt the Pro-Billet MSD in place! Each model is supplied with a special gear to work with the?factory camshafts.

Product Features:

Drop in billet replacement for late model Ford TFI 5.8L dist.
Supplied w/steel gear to work w/factory roller camshafts
Factory style ignition module connector accepts factory wiring
CNC machined billet aluminum housing and billet aluminum base
QPQ coated polished steel shaft; guided by sealed ball bearings
Supplied w/Late Model Distributor Cap And Rotor
Legal to install in all 50 states

from

$92.99

Carquest Premium distributors are built to meet or exceed the original equipment (OE) specifications for each application. Our distributors are built by a manufacturer that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each distributor is supplied with the cap, rotor and any seals needed for installation. Carquest Premium distributors are 100% new and undergo extensive validation testing to ensure long-lasting ignition performance and reliability.

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
100% new unit with no core charges
Precision machined shafts result in high speed accuracy and help prevent bearing failures
Every distributor is tested to ensure reliable and long-lasting performance
O-rings or gaskets included where applicable
Precision Engineered ignition modules and plugs ensure proper performance plus precise connection.
Precision machined and ground shafts assure high speed accuracy and prevent bearing failures.
Original Equipment Equivalent high voltage ignition coils.
100% New Components and fasteners eliminate premature failures.

from

$549.99

The street pro-billet distributors are the perfect choice for powerful engines that see plenty of street time. The street models share the same features as the small diameter models shown above, plus feature a vacuum advance. This canister provides improved economy and an accurate mechanical advance lets you dial-in an advance curve to match your driving needs. A magnetic pick-up produces accurate trigger signals that remain stable throughout the entire rpm range of your engine and is completely maintenance-free.

Product Features:

Billet housing 5/8 in. smaller dia. than stock Ford distributors
CARB E.O. Approved
Easy-to-adjust mech. advance w/supplied springs and stop bushings
Vacuum advance canister for improved economy (can be locked out)
CNC machined billet aluminum housing and billet aluminum base
Maintenance-free magnetic pickup and precision reluctor
Creates stable trigger signals throughout the rpm range
QPQ coated polished steel shaft; guided by sealed ball bearings
Advance plate and weights are fine blanked from chrome moly steel
QPQ coated for friction reduction
Mech. advance assem. can be locked out for crank trigger systems
Advance weight pins are staked and tig welded to the plate

from

$99.99

Put an end to high maintenance point ignition systems by utilizing a specialized electronic circuitry and an infrared signal. Stabilizes ignition timing from 1 to 10,000 RPM. Improves performance and fuel efficiency, easy to install with hand tools, reduces maintenance. It is built with the latest thermal clad based surface mount construction for maximum dependability and long life.

Product Features:

Most Accurate Ignition Timing System
Improves Performance And Fuel Economy
Easy To Install With Simple Hand Tools
Reduced Maintenance
Eliminates Changing Points

from

$212.99

The Ignitor II provides increased starting voltage with adaptive dwell control. Ignitor Module Kits are extremely easy to install and fit into your original distributor to maintain your stock look. No additional ignition box is required keeping a clean look under the hood. Ignitors are available for most distributors that came with mechanical breaker points and will cover AUTOMOTIVE, MARINE, INDUSTRIAL and AGRICULTURE applications.

Product Features:

Adaptive dwell maintains peak energy throughout the entire RPM range, reducing misfires while improving engine performance.
Develops on average 4 times more available energy between 3000 and 5000 RPM, and 2 times more available plug voltage.
Compensates for inherent electronic delay by adjusting the spark timing throughout the entire RPM range.
Synchronized peak current and spark timing reduces heat build-up.
Senses startup and develops more energy for quicker, easier starting.
Pair with a Flame Thrower Canister Coil for optimal performance
Legal in all 50 states and Canada (C.A.R.B. E.O. No. D-57-22)

from

$135.99

The original Ignitor module is ideal for restorations. Ignitor Module Kits are extremely easy to install and fit into your original distributor to maintain your stock look. No additional ignition box is required keeping a clean look under the hood. Ignitors are available for most distributors that came with mechanical breaker points and will cover AUTOMOTIVE, MARINE, INDUSTRIAL and AGRICULTURE applications.

Product Features:

Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
2:1 improvement over “points” in current fall time for increased coil output.
Rotating cobalt magnets trigger a Hall Effect integrated circuit; no points to burn; no moving parts to wear out.
Epoxy molding makes our module impervious to dirt, oil, grease and moisture.
Stable timing; no need for any adjustments.
Pair with a Flame Thrower Canister Coil for optimal performance
Legal in all 50 states and Canada (C.A.R.B. E.O. No. D-57-22)

from

$4.99

The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine¿s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$4.05

Driveworks offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.

Product Features:

Direct-fit OE replacement ensures ease of installation
Designed to meet OE performance
As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need

from

$12.99

The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$13.99

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$90.99

Most modern electronic ignition systems require suppression style wires to preserve sensitive components. Flame-Thrower 8mm Custom fit MAGx2 wires provide enhanced RFI suppression and dual current paths for more power delivered to the spark plug. Our custom wire sets have factory terminated ends for a superior connection and perfect fit, without cutting, crimping and splicing.

Product Features:

Two current paths for reliability and redundancy. -Primary path: Spiral wound stainless steel alloy.-Secondary path: Carbon impregnated fiberglass center core.
Low 500 ohm per foot resistance.
8mm Silicone jacket to resist high temperatures, moisture, oil and chemicals.
EPDM (Ethylene Propylene Diene Methylene) inner insulation for superior heat resistance and prevention of arcing and voltage leaks.
Fiberglass reinforcing braid for added strength and flexibility.

from

$88.99

Two current paths for reliability and redundancy. -Primary path: Spiral wound stainless steel alloy.-Secondary path: Carbon impregnated fiberglass center core.
Low 500 ohm per foot resistance.
8mm Silicone jacket to resist high temperatures, moisture, oil and chemicals.
EPDM (Ethylene Propylene Diene Methylene) inner insulation for superior heat resistance and prevention of arcing and voltage leaks.
Fiberglass reinforcing braid for added strength and flexibility.

from

$79.99

ACCEL’s SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.

Product Features:

7mm And 8mm High Gloss Silicone Jacket
450 F Rated Silicone Jacket
Stainless Steel Plug Terminals
RFI Suppression For Street Driven Applications
Custom-fit Universal And Import Coverage
High-strength Fiberglass Braid Construction
Pre And Post HEI Vehicles

from

$140.99

Set includes terminals for engines with early type (socket) and late type (HEI spark plug top) distributor caps. 90 degree boots and terminals factory installed on one end.

Product Features:

Extra Long 8.5mm Wires So You Can Cut To Your Designed Length
Incl. both socket-style and spark plug-style boots and terminals
Includes Mini-Stripper-Crimper For Factory Style Crimps
Size Includes: [2]48/50/56 in./[3] 32 in. Wires/Boots/Terminals
Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately

from

$52.99

All of the Street Fire components are spec’d by MSD engineers and designed to provide performance for the price. The quality of each part is backed up with a one year warranty!

Product Features:

Supplied w/Heavy Duty Rotor
Low Resistance Terminals
Full Power Output At High RPM
Perfect For Budget Minded Enthusiasts

from

$14.79

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$45.99

Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provides cooler operating temperatures.

Product Features:

Made from hi-performance 60 KV rated alkyd molding compound.
Cap and rotor kits include nylon rotor hold-down screws.
Flame-Thrower dust covers provide a larger air gap around the coil.

from

$57.99

MSD molds our most popular V8 distributor caps in-house. These caps are injection molded from DuPont? Rynite material and feature spark plug-style terminals. These terminals offer improved locking connections and the Rynite material is extremely strong with excellent dielectric properties. Plus, most caps have an optional wire retainer that is supplied with these caps to lock the wires in place.

Product Features:

Designed w/Performance In Mind
High Quality Material
Stainless Terminals
Performance replacement part

from

$9.99

An Ignition Capacitor is a device that will absorb excessive voltage spikes in electrical systems. The typical location or use for a capacitor is inside a distributor tied into a point ignition system. The ignition capacitor may also be called a radio capacitor or condenser used in electrical devices which may be susceptible to voltage spikes.

Product Features:

Application matched component to ensure the system can be returned to like new condition.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$13.49

The Ignition Contact Set is used in older vehicle applications to ground the ignition coil primary circuit and create the high secondary voltage required in the ignition process. Connected to the contact set is a condenser designed to absorb the high voltage spike created when the contact set opens.

Product Features:

Application matched component to ensure the system can be returned to like new condition.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$12.05

Direct-fit OE replacement ensures ease of installation
Designed to meet OE performance
As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need

from

$15.99

Application matched component to ensure the system can be returned to like new condition.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

Upgrade your 1951 Ford Custom with Top-Quality Ignition and Tune-Up Products

When it comes to maintaining or upgrading your 1951 Ford Custom, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Ignition and Tune-Up Products are key to keeping your Custom functioning at its best. At Advance Auto Parts, we offer a wide selection of 28 Ignition and Tune-Up Products for the 1951 Ford Custom, designed to meet your needs without breaking the bank. From Ignition Kit replacements to Distributors upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Ignition and Tune-Up Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Ignition and Tune-Up Products for your 1951 Ford Custom at great prices. Our Ignition and Tune-Up Products inventory for this model ranges from just $2.29 to $825.99, with an average price of $123.27. Our 28 Ignition and Tune-Up Products in stock come from 10 trusted brands, so you’re sure to find the right part for your 1951 Ford Custom without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1951 Ford Custom, we stock popular OEM and aftermarket Ignition and Tune-Up Products from top names like Mallory, NGK, Champion, and more. Mallory Ignition and Tune-Up Products start at just $133.99 and boast an impressive 4.9 stars average rating from customers. NGK and Champion also bring quality to the table, with Ignition and Tune-Up Products available starting at $2.29, and at an average 4.8 stars rating. With 34 customer reviews and counting, our 1951 Ford Custom Ignition and Tune-Up Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Ignition and Tune-Up Product upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals and more to make sure your 1951 Ford Custom is always ready to roll. We’re committed to providing you with everything you need to keep your Custom in top shape, all in one place. Start shopping confidently below for your 1951 Ford Custom!

Best-Selling Ignition Kits for 1951 Ford Customs

Enhance the driving experience in your Ford with 12 quality Ignition Kit components, starting at $12.99.

show more show less

from

$192.99

Adaptive dwell maintains peak energy throughout the entire RPM range, reducing misfires while improving engine performance.
Develops on average 4 times more available energy between 3000 and 5000 RPM, and 2 times more available plug voltage.
Compensates for inherent electronic delay by adjusting the spark timing throughout the entire RPM range.
Synchronized peak current and spark timing reduces heat build-up.
Senses startup and develops more energy for quicker, easier starting.
Pair with a Flame Thrower Canister Coil for optimal performance
Legal in all 50 states and Canada (C.A.R.B. E.O. No. D-57-22)

from

$135.99

Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
2:1 improvement over “points” in current fall time for increased coil output.
Rotating cobalt magnets trigger a Hall Effect integrated circuit; no points to burn; no moving parts to wear out.
Epoxy molding makes our module impervious to dirt, oil, grease and moisture.
Stable timing; no need for any adjustments.
Pair with a Flame Thrower Canister Coil for optimal performance
Legal in all 50 states and Canada (C.A.R.B. E.O. No. D-57-22)

from

$12.99

Application matched component to ensure the system can be returned to like new condition.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$168.99

Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
2:1 improvement over “points” in current fall time for increased coil output.
Rotating cobalt magnets trigger a Hall Effect integrated circuit; no points to burn; no moving parts to wear out.
Epoxy molding makes our module impervious to dirt, oil, grease and moisture.
Stable timing; no need for any adjustments.
Pair with a Flame Thrower Canister Coil for optimal performance
Legal in all 50 states and Canada (C.A.R.B. E.O. No. D-57-22)

from

$432.99

The Ignition Conversion Kit allows point type ignition systems to be converted to an electronic ignition type system. These universal kits are designed to fit directly into the current distributor with little modification required.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the manufacturer.

from

$335.99

Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
2:1 improvement over “points” in current fall time for increased coil output.
Rotating cobalt magnets trigger a Hall Effect integrated circuit; no points to burn; no moving parts to wear out.
Epoxy molding makes our module impervious to dirt, oil, grease and moisture.
Stable timing; no need for any adjustments.
Pair with a Flame Thrower Canister Coil for optimal performance
Legal in all 50 states and Canada (C.A.R.B. E.O. No. D-57-22)

from

$212.99

Adaptive dwell maintains peak energy throughout the entire RPM range, reducing misfires while improving engine performance.
Develops on average 4 times more available energy between 3000 and 5000 RPM, and 2 times more available plug voltage.
Compensates for inherent electronic delay by adjusting the spark timing throughout the entire RPM range.
Synchronized peak current and spark timing reduces heat build-up.
Senses startup and develops more energy for quicker, easier starting.
Pair with a Flame Thrower Canister Coil for optimal performance
Legal in all 50 states and Canada (C.A.R.B. E.O. No. D-57-22)

from

$209.99

Product constructed to meet all design and operating characteristics as intended by the manufacturer.

from

$192.99

Product constructed to meet all design and operating characteristics as intended by the manufacturer.

from

$168.99

Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
2:1 improvement over “points” in current fall time for increased coil output.
Rotating cobalt magnets trigger a Hall Effect integrated circuit; no points to burn; no moving parts to wear out.
Epoxy molding makes our module impervious to dirt, oil, grease and moisture.
Stable timing; no need for any adjustments.
Pair with a Flame Thrower Canister Coil for optimal performance
Legal in all 50 states and Canada (C.A.R.B. E.O. No. D-57-22)

from

$168.99

Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
2:1 improvement over “points” in current fall time for increased coil output.
Rotating cobalt magnets trigger a Hall Effect integrated circuit; no points to burn; no moving parts to wear out.
Epoxy molding makes our module impervious to dirt, oil, grease and moisture.
Stable timing; no need for any adjustments.
Pair with a Flame Thrower Canister Coil for optimal performance
Legal in all 50 states and Canada (C.A.R.B. E.O. No. D-57-22)

from

$151.99

Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
2:1 improvement over “points” in current fall time for increased coil output.
Rotating cobalt magnets trigger a Hall Effect integrated circuit; no points to burn; no moving parts to wear out.
Epoxy molding makes our module impervious to dirt, oil, grease and moisture.
Stable timing; no need for any adjustments.
Pair with a Flame Thrower Canister Coil for optimal performance
Legal in all 50 states and Canada (C.A.R.B. E.O. No. D-57-22)

Most Popular 1951 Ford Custom Distributors

Customize your Ford with 6 Distributors products like Distributor Rotor Buttons, Distributor Cap Kits, and Distributors, all priced under $825.99.

show more show less

from

$14.79

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$13.99

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$18.79

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$21.99

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$825.99

Early flathead racers and cruisers alike will be excited to see these front mount flathead distributors! These distributors are built around a CNC-machined billet aluminum housing for precise tolerances. The distributor is topped off with our own crab cap with spark plug style terminals for improved wire connections. Just under the cap and Rynite race rotor is MSD’s adjustable mechanical advance. This assembly features chromoly construction with Tig-welded weight pins to secure the precision fine blanked weights. MSD supplies different advance springs and stop bushings so you can dial-in an advance curve to meet your flathead’s specs. Just under the advance is MSD’s race-proven magnetic pick-up. This pickup, combined with a reluctor, produces accurate trigger signals that are responsible for firing the MSD Ignition control. Bring your flathead up to date with MSD Performance.

Product Features:

Designed for 1949-1953 8-BA Ford Flathead engines
No CARB Exemption Order Number
Does not require an MSD Ignition Control
Accepts Cap-A-Dapts
Supplied w/HEI style dist. cap/rotor/gear/roll pin/setup spacer
Nylon pads ensure smooth operation of the advance weights
Advance weight pins are staked and tig welded to the plate
Mech. advance assem. can be locked out for crank trigger systems

from

$549.99

Mechanical advance distributor calibrated for maximum performance with adjustable feature-dual point ignition. Dual point stabilized contact points eliminate point float and bounce to increase coil output. Get maximum performance at any RPM.

Product Features:

Brass Case Eliminate Corrosion
Insulation Prevent Leakage
Self-Lubricating Bushings
Material Prevents Shorts And Arcing
Maximum Conductivity
Maximum Performance At Any RPM
Fine Tune The Advance Curve
Eliminate Point Float

Top Picks for 1951 Ford Custom Ignition Wires

Upgrade Ford Customs with top-quality Ignition Wires parts, including 4 OEM and aftermarket selections for your 1951 model.

show more show less

from

$153.99

Features at a glance, low 300 Ohm resistance spiral core delivers high energy output for maximum spark at the plug. Great RFI suppression meets the demands of today’s on-board electronics, such as electronic ignition, sound systems, and computer controls. 8MM ozone-resistant red silicone jacket repels water, oil, grease, and fuel, and withstands temperatures up to 500 degrees. Fits V8, universal wire kit: includes 45 degree spark plug boots, female socket (standard) distributor boots and terminals.

Product Features:

Most Advanced Wire By Mallory
RFI Suppression
High Temperature Silicone Jacket
Withstands Over 500+F
Come In Ready To Use Kits
Extra Long Kits

from

$133.99

Most Advanced Wire By Mallory
RFI Suppression
High Temperature Silicone Jacket
Withstands Over 500+F
Come In Ready To Use Kits
Extra Long Kits

from

$88.99

Two current paths for reliability and redundancy. -Primary path: Spiral wound stainless steel alloy.-Secondary path: Carbon impregnated fiberglass center core.
Low 500 ohm per foot resistance.
8mm Silicone jacket to resist high temperatures, moisture, oil and chemicals.
EPDM (Ethylene Propylene Diene Methylene) inner insulation for superior heat resistance and prevention of arcing and voltage leaks.
Fiberglass reinforcing braid for added strength and flexibility.

from

$90.99

Two current paths for reliability and redundancy. -Primary path: Spiral wound stainless steel alloy.-Secondary path: Carbon impregnated fiberglass center core.
Low 500 ohm per foot resistance.
8mm Silicone jacket to resist high temperatures, moisture, oil and chemicals.
EPDM (Ethylene Propylene Diene Methylene) inner insulation for superior heat resistance and prevention of arcing and voltage leaks.
Fiberglass reinforcing braid for added strength and flexibility.

In-Demand Spark Plugs for 1951 Ford Customs

Select from 5 premium Spark Plugs parts for your 1951 Ford Custom, with prices ranging from $2.29 to $7.49.

show more show less

from

$2.29

The Copper Plus spark plug is engineered for dependable performance and durability, making it an ideal OE-type replacement. Featuring a copper core center electrode, it ensures superior conductivity and precise heat control, which extends the plug’s lifespan and resists fouling. The nickel-tipped center and ground electrodes provide enhanced durability and corrosion resistance, ensuring reliable ignition performance over time. Built to ISO and SAE Standards, this spark plug guarantees proven performance and compatibility with a wide range of vehicles. Its flat seat type and resistor design further enhance its functionality, making it a trusted choice for maintaining engine efficiency.

Product Features:

Resists fouling
Superior corrosion resistance
Dependable and proven performance
Increased conductivity and heat control for good overall wear

from

$5.99

NGK Standard spark plugs (in the iconic NGK ‘yellow box’ packaging) are a proven OE cornerstone and technology customers have relied on for decades. Engineered specifically for OE applications, NGK Standard spark plugs provide OE quality nickel alloy reliable performance and design. NGK’s legendary high grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance, while triple gasket sealing prevents combustion gas leakage. Solid 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges. Trivalent metal plating ensures superior anti-corrosion and anti-seizing properties.

Product Features:

ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction nickel alloy center electrode provides consistent performance
RECOMMENDED USAGE: Best for vehicles with OE nickel alloy plugs, not recommended on vehicles with factory precious metal plugs
NGK’s OE CERAMIC TECHNOLOGY: High grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance
SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal

from

$3.99

Autolite Copper spark plugs are crafted to ensure quick starts and reliable performance, making them a dependable choice for your vehicle or application. Featuring a copper core center electrode, these spark plugs excel in thermal control and resist fouling, ensuring consistent functionality. The high nickel alloy center and ground electrodes are designed for extended life, while the high alumina multi-rib ceramic insulator enhances thermal conductivity and insulation for added strength. With a nickel-plated shell, these spark plugs boast superior corrosion resistance, offering durability over extended periods. The standard center electrode design with short projection and nickel tip material further contributes to their reliable performance. Ideal for regular-grade applications, these spark plugs are built with a flat seat type for secure installation. Whether you’re seeking enhanced ignition or long-lasting durability, Autolite Copper spark plugs deliver exceptional value and performance.

Product Features:

The copper core center electrode aids in thermal control and improves resistance to fouling.
Its specially engineered high nickel alloy center and ground electrode provides extended life.
The high alumina multi-rib ceramic insulator provides thermal conductivity and superior insulation for increased strength.
Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended periods.
The flat seat type design ensures a secure and precise installation, contributing to consistent and reliable performance.

from

$3.99

ACDelco Professional Conventional Spark Plugs are designed for reliability and efficient performance, and are a high quality replacement for many vehicles on the road today. Their high-quality copper cores and outstanding suppression characteristics deliver reliable performance. They are also available for Marine applications. These premium aftermarket replacement spark plugs are manufactured to meet your expectations for fit, form, and function.

Product Features:

Black Onyx coating helps reduce corrosion
Copper core provides great heat transfer and helps maximize plug durability
Ribbed suppressor seal extends resistance and helps prevent spark ‘flash over’ and misfires
Nickel-chrome alloy sheathing helps prevent corrosion on center electrode
Available for use in Marine applications

Spark Plug: Reliable Ignition & Performance

from

$7.49

Ensure consistent ignition and optimal engine performance with this high-quality spark plug. Designed to deliver reliable starts and smooth operation, it enhances fuel efficiency and reduces emissions, making it an essential component for maintaining your vehicle’s peak performance. Built with durable materials, it withstands extreme temperatures and resists wear, ensuring long-lasting functionality. Its precision engineering guarantees compatibility with a wide range of vehicles, providing a perfect fit and hassle-free installation. Whether you’re replacing a worn-out plug or upgrading for better performance, this spark plug offers exceptional value and reliability for your automotive needs.

Product Features:

Delivers consistent ignition for smooth engine operation.
Enhances fuel efficiency and reduces emissions for environmentally friendly performance.
Built with durable materials to withstand extreme temperatures and resist wear.
Precision-engineered for compatibility with a wide range of vehicles.
Offers hassle-free installation with a perfect fit for reliable functionality.

Most Sold 1951 Ford Custom Ignition Coils and Boots

Explore our best-selling Ford parts for the 1951 Custom among 1 OEM and aftermarket options starting from $31.99.

show more show less

from

$31.99

Built by IATF 16949 certified manufacturers for consistent durability
Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
Segmented secondary bobbins to distribute high voltage and prevent shorting
100% end-of-line tested to ensure proper performance
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

Top-Rated Ignition and Tune-Up Products Brands For Your 1951 Ford Custom

Shop for the best-rated brands offering Ignition and Tune-Up Products and other products for your 1951 Ford Customs. Below you’ll find some of our best rated Ignition and Tune-Up Products from Mallory, NGK, and Champion, and more. Ignition and Tune-Up Products from these brands that fit a 1951 Custom start at just $2.29 and are rated as high as 4.9 stars. OEM and aftermarket Ignition and Tune-Up Products don’t get more top quality, durable, and affordable than from the brands below.

Popular Mallory 1951 Ford Custom Ignition and Tune-Up Products

When it comes to maintaining or upgrading your 1951 Ford Custom, using quality Ignition and Tune-Up Products is essential to ensure durability and a perfect fit. Mallory ticks all of those boxes. We offer a wide selection of Mallory Ignition and Tune-Up Products, specifically designed for the 1951 Ford Custom. With over 2 Mallory brand Ignition and Tune-Up Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $133.99, with an average price of just $143.99. Plus, with over 3 customer reviews and an average rating of 4.9 stars, you can trust that our Mallory Ignition and Tune-Up Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $133.99

(1)

Mallory Prosidewinder 90F Univ. Wire Set

“Good quality wires with low impedence. The Advance listing says to get part 669 if you have male terminal distributor cap. This is not needed – the ”

from $153.99

(2)

Mallory Prosidewinder 135F Univ/Wire Set

“Very high quality product for my show car. My car is a 1940 Ford Tudor Deluxe with a 1942 style ‘crab’ distributor. It still has the original engine t”

Popular NGK 1951 Ford Custom Ignition and Tune-Up Products

NGK auto parts is one of the highest quality Ignition and Tune-Up Product brands in the market. Any 1951 Ford Custom owner should feel confident when installing genuine NGK parts in their vehicle. To ensure the best fit and performance for your 1951 Custom, Advance Auto Parts carries a full inventory of 1 NGK Ignition and Tune-Up Products. Plus you will be keeping your Ford in peak condition while saving money because prices on these NGK Ignition and Tune-Up Products range up to $5.99, plus, with more than 3 customer reviews and an impressive 4.8 stars average rating, you can be confident the Fram Ignition and Tune-Up Products below will deliver on both quality and value.

from $5.99

(3)

Standard Nickel Spark Plug (B-6L): Reliable OE Performance

“last longer in the older engines than original”

FAQs for 1951 Ford Custom Ignition and Tune-Up Products

Which Ignition and Tune-Up Products are best-sellers for 1951 Ford Customs?

Out of 28 Ignition and Tune-Up Products that fit 1951 Ford Customs, the following parts are the top sellers:

Standard Nickel Spark Plug (B-6L): Reliable OE Performance (19650315) – $5.99
Ignition Coil (12413133) – $31.99
Copper Core Spark Plug: Reliable Performance & Durability (11400046) – $3.99

What’s the price range for 1951 Ford Custom Ignition and Tune-Up Products?

Ignition and Tune-Up Product prices for the 1951 Ford Custom start at $2.29 and go up to $825.99 for the most premium parts.

What’s the average price of a Ignition and Tune-Up Product for a 1951 Ford Custom?

The average price for Ignition and Tune-Up Products for the 1951 Ford Custom is $123.27. Keep in mind the variety of part types within our Ignition and Tune-Up Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Ignition and Tune-Up Products for other Ford Custom model years?

Yes, we currently carry Ignition and Tune-Up Products for 16 model years of Ford Customs between 1949 and 1976. Ignition and Tune-Up Products are bought most frequently for the following model years: 1976, 1975, 1974, 1973, 1972, 1971, 1970, 1969, and 1968.

What are the cheapest Ignition and Tune-Up Products for my 1951 Ford Custom?

The cheapest 1951 Ford Custom Ignition and Tune-Up Products we carry in stock are:

Copper Plus Spark Plug (RH10C): Dependable Performance & Durability (12013920) – $2.29
Copper Non-Resistor Spark Plug: Quick Starts & Reliable Performance (5391628) – $3.99
Copper Core Spark Plug: Reliable Performance & Durability (11400046) – $3.99
Standard Nickel Spark Plug (B-6L): Reliable OE Performance (19650315) – $5.99
Spark Plug: Reliable Ignition & Performance (50012487) – $7.49

What are the top-rated Ignition and Tune-Up Products that fit the 1951 Ford Custom?

Out of 34 reviews by customers, our 1951 Ford Custom Ignition and Tune-Up Products have an average customer rating of . These are some of the highest-rated Ignition and Tune-Up Product types for the 1951 Ford Custom and their top-rated products:

Spark Plugs
- Copper Plus Spark Plug (RH10C): Dependable Performance & Durability (12013920) – $2.29
- Standard Nickel Spark Plug (B-6L): Reliable OE Performance (19650315) – $5.99
- Copper Non-Resistor Spark Plug: Quick Starts & Reliable Performance (5391628) – $3.99
Ignition Wires
- Copper Plus Spark Plug (RH10C): Dependable Performance & Durability (12013920) – $2.29
- Standard Nickel Spark Plug (B-6L): Reliable OE Performance (19650315) – $5.99
- Copper Non-Resistor Spark Plug: Quick Starts & Reliable Performance (5391628) – $3.99

What types of Ignition and Tune-Up Products do you sell for my 1951 Ford Custom?

As of 11/2/25, these are some of the most in-demand types of Ignition and Tune-Up Products for a 1951 Ford Custom:

Can I get help with 1951 Ford Custom Ignition and Tune-Up Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Ignition and Tune-Up Products and more.

What is your return policy for Ford Custom Ignition and Tune-Up Products?

Advance Auto Parts keeps returns simple. For new Ford Custom Ignition and Tune-Up Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1951 Ford Custom Ignition and Tune-Up Products

Accel – Super Stock Elect Coil Chrome (Part No.8145C)

Carquest Premium – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.EBC1715)

Carquest Premium – Ignition Coil (Part No.EBC1717)

Autolite – Double Platinum Spark Plug: Enhanced Durability & Performance (Part No.APP45)

Motorcraft – Spark Plug: Quick Starts & Enhanced Fuel Economy (Part No.SP-420)

Motorcraft – Standard Spark Plug (BSF82CA): Reliable Performance & Durability (Part No.SP-431-A)

MSD Ignition – Distributor; Ford TFI; 351W (Part No.8453)

Carquest Premium – Distributor T2809: 100% New, With Cap and Rotor (Part No.T2809)

MSD Ignition – Distributor; Ford 289/302; Vacuum Advance (Part No.8479)

Accel – Module:Eliminator Replacement (Part No.2005)

PerTronix – 91283 Ignitor II Adaptive Dwell Control Ford 8 cyl (Part No.91283)

PerTronix – 1261 Ignitor Ford 6 cyl (Part No.1261)

Carquest – Distributor Rotor (Part No.23A1015)

Driveworks – Distributor Rotor (Part No.23050)

Carquest Premium – Distributor Rotor (Part No.DAA1008)

Carquest Premium – Distributor Rotor (Part No.DAA1009)

PerTronix – 808480 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 180 Degree Red (Part No.808480)

PerTronix – 808415 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 115 Degree Red (Part No.808415)

Accel – 8Mm Super Stock Copper Uni (Part No.4038)

MSD Ignition – Wire Set; Super Conductor; 8-cyl. Multi-Angle Plug; Socket/HEI (Part No.31199)

MSD Ignition – Cap/Rotor Kit; Street Fire; Ford V8; Socket (Part No.5506)

Carquest Premium – Distributor Cap (Part No.CAC1066)

PerTronix – D4000 Flame-Thrower HEI Distributor Cap and Rotor Kit Black (Part No.D4000)

MSD Ignition – Distributor Cap; Ford HEI (Part No.8408)

Carquest Premium – Ignition Condenser (Part No.GAA1251)

Carquest Premium – Ignition Contact Set (Part No.AKA1008)

Driveworks – Distributor Condenser (Part No.14007)

Carquest Premium – Ignition Condenser (Part No.GAA1034)

PerTronix – 91261 Ignitor II Adaptive Dwell Control Ford 6 cyl (Part No.91261)

PerTronix – 1261 Ignitor Ford 6 cyl (Part No.1261)

Carquest Premium – Ignition Condenser (Part No.GAA1037)

PerTronix – 1283P12 Ignitor Ford 1949-53 8 cyl 12 Volt Positive Ground (Part No.1283P12)

Carquest Premium – Ignition Conversion Kit (Part No.CBA1803)

PerTronix – LU-186 Ignitor Lucas 8 cyl (Part No.LU-186)

PerTronix – 91283 Ignitor II Adaptive Dwell Control Ford 8 cyl (Part No.91283)

Carquest Premium – Ignition Conversion Kit (Part No.CBA1757)

Carquest Premium – Ignition Conversion Kit (Part No.CBA1233)

PerTronix – 1283P6 Ignitor Ford 1949-53 8 cyl 6 Volt Positive Ground (Part No.1283P6)

PerTronix – 1283N6 Ignitor Ford 1949-53 8 cyl 6 Volt Negative Ground (Part No.1283N6)

PerTronix – 1283 Ignitor Ford 1949-53 8 cyl (Part No.1283)

Carquest Premium – Distributor Cap (Part No.CAC1066)

Carquest Premium – Distributor Rotor (Part No.DAA1009)

Carquest – Distributor Cap (Part No.24C1029)

Carquest Premium – Distributor Cap (Part No.CAC1087)

MSD Ignition – Distributor; Flathead Ford; Ready-to-Run; 49-53 (Part No.8573)

Mallory – Mallory Dual Point: 8-Ba Ford Flathead (Part No.2527501)

Mallory – Mallory Prosidewinder 135F Univ/Wire Set (Part No.947)

Mallory – Mallory Prosidewinder 90F Univ. Wire Set (Part No.937)

PerTronix – 808415 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 115 Degree Red (Part No.808415)

PerTronix – 808480 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 180 Degree Red (Part No.808480)

Champion – Copper Plus Spark Plug (RH10C): Dependable Performance & Durability (Part No.854)

NGK – Standard Nickel Spark Plug (B-6L): Reliable OE Performance (Part No.3212)

Autolite – Copper Non-Resistor Spark Plug: Quick Starts & Reliable Performance (Part No.216)

ACDelco – Copper Core Spark Plug: Reliable Performance & Durability (Part No.C45L)

Motorcraft – Spark Plug: Reliable Ignition & Performance (Part No.SP-473-AX)

Carquest Premium – Ignition Coil (Part No.EBC1521)