1951 Chrysler Windsor Ignition and Tune-Up Products
Find Your Specific 1951 Chrysler Windsor Ignition and Tune-Up Products
Below you will find various in-demand Chrysler Ignition and Tune-Up Products, components and accessories for your 1951 Windsor. Advance Auto Parts has popular Windsor parts like Ignition Coils and Boots, Distributors, Spark Plugs and more. You’ll also find aftermarket and OEM Ignition and Tune-Up Products for other Windsor model years including
1953,
1954,
1955,
1956,
1957,
1958,
1959,
1960,
1961 and more. Select a category of 1951 Chrysler Windsor Ignition and Tune-Up Products below and start saving instantly.
Popular 1951 Chrysler Windsor Ignition and Tune-Up Products Categories
Essential Ignition and Tune-Up Products for 1951 Chrysler Windsors
Carquest Premium – Ignition Contact Set (Part No.AKA1007)
from
$8.99
The Ignition Contact Set is used in older vehicle applications to ground the ignition coil primary circuit and create the high secondary voltage required in the ignition process. Connected to the contact set is a condenser designed to absorb the high voltage spike created when the contact set opens.
Product Features:
See More
Product Features:
- Application matched component to ensure the system can be returned to like new condition.
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Carquest Premium – Ignition Contact Set (Part No.AKA1015)
from
$14.99
The Ignition Contact Set is used in older vehicle applications to ground the ignition coil primary circuit and create the high secondary voltage required in the ignition process. Connected to the contact set is a condenser designed to absorb the high voltage spike created when the contact set opens.
Product Features:
See More
Product Features:
- Application matched component to ensure the system can be returned to like new condition.
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Carquest Premium – Ignition Condenser (Part No.GAA1045)
from
$11.99
An Ignition Capacitor is a device that will absorb excessive voltage spikes in electrical systems. The typical location or use for a capacitor is inside a distributor tied into a point ignition system. The ignition capacitor may also be called a radio capacitor or condenser used in electrical devices which may be susceptible to voltage spikes.
Product Features:
See More
Product Features:
- Application matched component to ensure the system can be returned to like new condition.
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Carquest Premium – Ignition Condenser (Part No.GAA1038)
from
$18.99
An Ignition Capacitor is a device that will absorb excessive voltage spikes in electrical systems. The typical location or use for a capacitor is inside a distributor tied into a point ignition system. The ignition capacitor may also be called a radio capacitor or condenser used in electrical devices which may be susceptible to voltage spikes.
Product Features:
See More
Product Features:
- Application matched component to ensure the system can be returned to like new condition.
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Carquest Premium – Ignition Contact Set (Part No.AKA1011)
from
$13.99
The Ignition Contact Set is used in older vehicle applications to ground the ignition coil primary circuit and create the high secondary voltage required in the ignition process. Connected to the contact set is a condenser designed to absorb the high voltage spike created when the contact set opens.
Product Features:
See More
Product Features:
- Application matched component to ensure the system can be returned to like new condition.
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Carquest Premium – Distributor Rotor (Part No.DAA1028)
from
$8.49
The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.
Product Features:
See More
Product Features:
- All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
- Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
- Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
- Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.
Carquest Premium – Distributor Rotor (Part No.DAA1037)
from
$14.99
The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.
Product Features:
See More
Product Features:
- All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
- Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
- Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
- Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.
Carquest – Distributor Rotor (Part No.23A1016)
from
$5.99
The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine¿s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.
Product Features:
See More
Product Features:
- All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
- Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
- Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
- Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.
Carquest Premium – Distributor Rotor (Part No.DAA1035)
from
$14.99
The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.
Product Features:
See More
Product Features:
- All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
- Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
- Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
- Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.
Carquest Premium – Distributor Rotor (Part No.DAA1005)
from
$10.99
The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.
Product Features:
See More
Product Features:
- All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
- Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
- Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
- Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.
ACDelco – Conventional Spark Plug: Reliable Performance & Durability (Part No.R45XLS)
from
$6.29
ACDelco Professional Conventional Spark Plugs are designed for reliability and efficient performance, and are a high quality replacement for many vehicles on the road today. Their high-quality copper cores and outstanding suppression characteristics deliver reliable performance. They are also available for Marine applications. These premium aftermarket replacement spark plugs are manufactured to meet your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- Black Onyx coating helps reduce corrosion
- Copper core provides great heat transfer and helps maximize plug durability
- Ribbed suppressor seal extends resistance and helps prevent spark ‘flash over’ and misfires
- Nickel-chrome alloy sheathing helps prevent corrosion on center electrode
- Available for use in Marine applications
- Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
- Premium aftermarket replacement part
- Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
Autolite – Copper Resistor Spark Plug: Quick Starts & Enhanced Durability (Part No.85)
from
$3.99
Autolite Copper spark plugs are expertly crafted to ensure reliable performance and long-lasting durability for your vehicle. Featuring a copper core center electrode, these plugs excel in thermal control and resist fouling, ensuring consistent operation. The high nickel alloy center and ground electrodes are designed for extended life, while the high alumina multi-rib ceramic insulator enhances thermal conductivity and provides superior insulation for added strength. With a nickel-plated shell, these spark plugs resist corrosion, making them ideal for long-term use. The mid-projection center electrode and flat seat type ensure a precise fit, while the resistor design minimizes electrical interference. Optimized for good fuel economy, these spark plugs help you maximize mileage and efficiency. Built with regular-grade materials and nickel-tipped electrodes, they deliver dependable performance and quick starts, meeting the demands of your vehicle or application.
Product Features:
See More
Product Features:
- The copper core center electrode aids in thermal control and improves resistance to fouling.
- Its specially engineered high nickel alloy center and ground electrode provides extended life.
- The high alumina multi-rib ceramic insulator provides thermal conductivity and superior insulation for increased strength.
- Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended periods.
- Good Fuel Economy: Designed to optimize fuel efficiency, this spark plug helps you get the most out of every gallon.
Champion – Copper Plus Spark Plug (RH10C): Dependable Performance & Durability (Part No.854)
from
$2.29
The Copper Plus spark plug is engineered for dependable performance and durability, making it an ideal OE-type replacement. Featuring a copper core center electrode, it ensures superior conductivity and precise heat control, which extends the plug’s lifespan and resists fouling. The nickel-tipped center and ground electrodes provide enhanced durability and corrosion resistance, ensuring reliable ignition performance over time. Built to ISO and SAE Standards, this spark plug guarantees proven performance and compatibility with a wide range of vehicles. Its flat seat type and resistor design further enhance its functionality, making it a trusted choice for maintaining engine efficiency.
Product Features:
See More
Product Features:
- Resists fouling
- Superior corrosion resistance
- Dependable and proven performance
- Increased conductivity and heat control for good overall wear
Autolite – Copper Resistor Spark Plug: Quick Starts & Reliable Performance (Part No.86)
from
$4.29
Autolite Copper spark plugs are crafted to ensure reliable performance and quick starts, making them an ideal choice for your vehicle or application. Featuring a copper core center electrode, these spark plugs excel in thermal control and resist fouling, ensuring consistent functionality. The high nickel alloy center and ground electrodes are designed for extended life, while the mid-projection standard center electrode enhances ignition efficiency. Built with a high alumina multi-rib ceramic insulator, these spark plugs offer superior insulation and thermal conductivity for added strength. The nickel-plated shell provides exceptional corrosion resistance, ensuring durability over extended use. With a flat seat type and integrated resistor, these spark plugs deliver dependable performance while maintaining compatibility with regular-grade applications. Designed to meet your performance expectations, Autolite Copper spark plugs combine advanced materials and engineering for lasting value and reliability.
Product Features:
See More
Product Features:
- The copper core center electrode aids in thermal control and improves resistance to fouling.
- Its specially engineered high nickel alloy center and ground electrode provides extended life.
- The high alumina multi-rib ceramic insulator provides thermal conductivity and superior insulation for increased strength.
- Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended periods.
- The integrated resistor ensures dependable performance and compatibility with regular-grade applications, enhancing reliability and versatility.
Champion – Platinum Power Spark Plug (RN14PMC): Powerful Performance & Durability (Part No.3405)
from
$5.29
Champion Platinum Power spark plugs are engineered to deliver exceptional performance and durability, making them an ideal choice for maintaining peak engine efficiency. Featuring a platinum center electrode, these spark plugs ensure long-lasting reliability and consistent performance. The fine-wire center electrode enhances ignitability, while the V-trimmed ground electrode sharpens spark focus for optimal combustion. Constructed with exclusive Heat-Active alloy, the electrodes quickly reach and maintain the ideal operating temperature, ensuring smooth engine operation under various conditions. The platinum-tipped center wire resists wear and helps maintain the proper gap specification throughout the plug’s lifespan. Designed as a standard replacement with a flat seat type and integrated resistor, these spark plugs are a perfect OE replacement for a wide range of engines. With a nickel ground electrode tip and a focus on precision, these spark plugs provide powerful performance and long-term value for your vehicle.
Product Features:
See More
Product Features:
- Platinum Power- Premium Spark Plug. Powerful Performance.
- Platinum center electrode for long life
- Fine-wire center electrode for greater ignitability
- V-trimmed ground electrode promotes sharper spark focus
- Heat-Active alloy allows electrodes to reach optimal temperature
- Platinum tipped center wire resists wear and helps to maintain proper gap spec over life of the plug
- Integrated Resistor and Flat Seat Type: Equipped with an integrated resistor and flat seat type, making it an ideal OE replacement for various engines.
Champion – Copper Plus Spark Plug (N12YC): Dependable Performance & Durability (Part No.38)
from
$3.99
The Copper Plus spark plug is engineered for dependable performance and durability, making it a reliable choice for maintaining your engine’s efficiency. Featuring a copper core center electrode, it ensures superior conductivity and precise heat control, promoting longer life and consistent wear. The nickel center electrode tip further enhances heat range accuracy, boosting overall reliability. Built to ISO and SAE Standards, this spark plug delivers proven performance while offering superior corrosion resistance for lasting durability. Its flat seat type design ensures a secure fit, optimizing engine efficiency and performance. As a standard replacement grade, this spark plug is designed to meet the demands of everyday driving while maintaining high-quality functionality. Whether you’re looking for enhanced heat control or a secure fit, this spark plug provides excellent value and dependable results for your vehicle.
Product Features:
See More
Product Features:
- Copper Plus – Dependable Performance and Durability
- Copper core center electrode allows for accurate control of heat range for longer life
- Superior corrosion resistance
- Built to ISO and SAE standards for proven performance
- Built to ISO and SAE standards for proven performance
- Nickel Center Electrode Tip: Equipped with a nickel center electrode tip, it provides accurate control of the heat range, further enhancing the spark plug’s reliability.
- Flat Seat Type: The flat seat type design ensures a secure fit, contributing to the overall efficiency and performance of your engine.
Carquest – Distributor Cap (Part No.24C1019)
from
$9.99
The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine¿s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.
Product Features:
See More
Product Features:
- All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
- Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
- Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
- Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.
Carquest Premium – Distributor Cap (Part No.CAC1057)
from
$21.99
The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.
Product Features:
See More
Product Features:
- All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
- Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
- Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
- Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.
Carquest Premium – Distributor Cap (Part No.CAC1099)
from
$27.99
The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.
Product Features:
See More
Product Features:
- All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
- Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
- Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
- Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.
Carquest Premium – Distributor Cap (Part No.CAC1098)
from
$21.99
The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.
Product Features:
See More
Product Features:
- All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
- Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
- Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
- Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.
Carquest Premium – Distributor Cap and Rotor Kit (Part No.CAC1833)
from
$43.49
The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.
Product Features:
See More
Product Features:
- All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
- Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
- Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
- Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.
Carquest Premium – Distributor Cap (Part No.CAC1106)
from
$37.99
The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.
Product Features:
See More
Product Features:
- All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
- Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
- Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
- Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.
ACDelco – Ignition Coil (Part No.U505)
from
$79.99
An ACDelco Professional, premium aftermarket Ignition Coil is a high quality replacement for many vehicles on the road today. It increases electrical system voltage to help ignite the air/fuel mixture as the starting and charging system starts the engine, maintains the battery’s charge, and provides power to the electrical accessories while the engine is running. An ACDelco Professional Ignition Coil uses pure copper windings to improve durability and provides higher resistance to internal shorts and dielectric breakdown. Because the number and shape of the laminations determine the output characteristics of an ignition coil, ACDelco ensures that the silicone steel plates surrounding the ignition coil correctly match the original part size and number. Since steel laminations work best when they are new, shiny, and clean, ACDelco laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed. This premium aftermarket replacement ignition coil is manufactured to meet your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- High quality coated windings to improve durability and provide protection against internal shorts and dielectric breakdown
- Silicone steel plates surrounding the ignition coil correctly match the original part size and number exactly
- Laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed
- Professional, premium aftermarket replacement
- Provides the performance and dependability you expect from ACDelco
- Manufactured to meet expectations for fit, form, and function
Edelbrock – Ignition Coil No. 22739 12V Cannister Style, 1.4 Ohm Primary Resistance (Part No.22739)
from
$46.99
Edelbrock Ignition Coil No. 22739 is a universal 12-volt cannister-style coil designed as a high-quality direct bolt-on replacement for OEM ignition coils. This advanced coil has a primary resistance of 1.4 ohms with an output of 42,000 volts. Internally, each Edelbrock Coil features heavy-duty primary and secondary windings for higher energy and greater spark that can help to provide quicker starts with improved idle quality. With a durable oil-filled housing, Edelbrock Coils are resistant to heat, shock and vibration with an effective operating range of 0 to 6,500 RPM.
Product Features:
See More
Product Features:
- output of 42000V
Accel – Super Stock Elect Coil Chrome (Part No.8145C)
from
$79.99
Excellent high performance coil for vehicles that have been converted from points to a breakerless electronic distributor or electronic ignition system, where a canister type oil filled can coil is preferred. Designed with optimized low resistance, high turns ratio windings to work specifically with ACCEL 41, 51, 52, 61 & 71000 Series breakerless electronic replacement distributors. Engineered for higher energy output resulting in quicker starting, improved throttle response and more high RPM power. Special crimped and soldered internal connections ensure positive contacts. High performance tan Alkyd tower provides “”flashover”” protection to primary terminals. Available in “”ACCEL Yellow”” or Chrome Plated can.
Product Features:
See More
Product Features:
- Engineered for higher energy output
- Improved throttle responce
- More high RPM power
- Chrome Plated
Mallory – Universal Street Performance Ignition Coil (Part No.29219)
from
$83.99
Universal, 12-volt coil features an oil-filled design and arc resistant alkyd top for superior performance, insulation and cooling. The internal design of this coil eliminates the need for a separate ballast resistor. This coil is specifically designed to deliver optimum performance when used with: Mallory UNILITE or magnetic breaker less ignitions Mallory HYFIRE IV electronic ignition controls, and Mallory electronic ignition conversion kits.
Product Features:
See More
Product Features:
- 12 Volt Coil
- Oil-Filled Design
- Arch Resistant Alkyd Top
- Designed To Deliver Optimum Performance
Carquest Premium – Ignition Coil (Part No.EBC1521)
from
$31.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Built by IATF 16949 certified manufacturers for consistent durability
- Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
- Segmented secondary bobbins to distribute high voltage and prevent shorting
- 100% end-of-line tested to ensure proper performance
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
Carquest – Ignition Coil: Meets OE Specifications, 1 Count (Part No.26C1041)
from
$41.49
Carquest ignition coils meet original equipment (OE) fit, form and function and are built to ensure reliable starting and performance. Carquest ignition coils are tested to ensure proper spark and perfect fit for each application. These ignition coils are an affordable repair choice to restore the vehicle’s ignition system performance. Carquest ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Long service life and durable performance
- High dielectric strength for reliability
- Corrosion-resistant connections
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
- High reliability
- Long service life
Upgrade your 1951 Chrysler Windsor with Top-Quality Ignition and Tune-Up Products
When it comes to maintaining or upgrading your 1951 Chrysler Windsor, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chrysler or enhancing its overall performance, Ignition and Tune-Up Products are key to keeping your Windsor functioning at its best. At Advance Auto Parts, we offer a wide selection of 13 Ignition and Tune-Up Products for the 1951 Chrysler Windsor, designed to meet your needs without breaking the bank.
From
Ignition Coils and Boot
replacements to
Distributors
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Ignition and Tune-Up Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Ignition and Tune-Up Products for your 1951 Chrysler Windsor at great prices.
Our Ignition and Tune-Up Products inventory for this model
ranges from just $1.99 to $31.99, with
an average price of $11.82.
Our 13 Ignition and Tune-Up Products in stock come from 6 trusted brands, so you’re sure to find the right part for your 1951 Chrysler Windsor without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1951 Chrysler Windsor, we stock popular OEM and aftermarket Ignition and Tune-Up Products from top names
like ACDelco, Champion, Autolite, and more.
ACDelco Ignition and Tune-Up Products
start at just $6.29 and boast an impressive 4.7 stars average rating from customers.
Champion and Autolite also bring quality to the table, with Ignition and Tune-Up Products available starting at $2.99, and at an average 4.7 stars rating.
With 56 customer reviews and counting, our 1951 Chrysler Windsor Ignition and Tune-Up Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Ignition and Tune-Up Product upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals
and more to make sure your 1951 Chrysler Windsor is always ready to roll. We’re committed to providing you with everything you need to keep your Windsor in top shape, all in one place.
Start shopping confidently below for your 1951 Chrysler Windsor!
Best-Selling Ignition Coils and Boots for 1951 Chrysler Windsors
Enhance the driving experience in your Chrysler with 1 quality Ignition Coils and Boot components, starting at $31.99.
Carquest Premium – Ignition Coil (Part No.EBC1521)
from
$31.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Built by IATF 16949 certified manufacturers for consistent durability
- Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
- Segmented secondary bobbins to distribute high voltage and prevent shorting
- 100% end-of-line tested to ensure proper performance
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
Most Popular 1951 Chrysler Windsor Distributors
Customize your Chrysler with 2 Distributors products
like Distributor Rotor Buttons and
Distributor Cap Kits, all
priced under $21.99.
Carquest Premium – Distributor Cap (Part No.CAC1098)
from
$21.99
The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.
Product Features:
See More
Product Features:
- All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
- Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
- Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
- Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.
Carquest Premium – Distributor Rotor (Part No.DAA1035)
from
$14.99
The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.
Product Features:
See More
Product Features:
- All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
- Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
- Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
- Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.
Top Picks for 1951 Chrysler Windsor Spark Plugs
Upgrade Chrysler Windsors with top-quality Spark Plugs parts, including 7 OEM and aftermarket selections for your 1951 model.
E3 – DiamondFIRE Spark Plug: More Power & Fuel Efficiency (Part No.E3.52)
from
$8.49
The Premium DiamondFire Automotive Spark Plug is engineered to deliver exceptional performance and efficiency for your vehicle. Featuring E3’s patented Diamond Fire edge-to-edge ground electrode, it ensures a faster, more complete burn for smoother acceleration and idle. The innovative “diamond-shaped” side wire electrode enhances combustion by quickly igniting the air/fuel mixture, resulting in a larger and faster flame kernel. This translates to improved power output – up to 6% on average – and better fuel efficiency, saving you money while reducing engine carbon deposits. Constructed with durable nickel center and ground electrode tips, this spark plug is built to last. Its gasket seat type ensures a secure fit, and the pre-gapped design eliminates the need for adjustments, making installation hassle-free. With its advanced technology, this spark plug not only boosts engine performance but also contributes to a cleaner, more efficient combustion process.
Product Features:
See More
Product Features:
- E3’s Diamond Fire edge to edge ground electrode provides maximum performance with increased efficiency and a faster more complete burn.
- Smoother Acceleration & Idle – The faster flame initiated by the spark plug results in a more complete burn of the ingested fuel charge. More pressure is created against the piston more fuel is put to work
- Energy – Power output improved up to 6% on average in the typical operating ranges. Results will vary.
- Efficiency – The “diamond shaped” side wire electrode projects the combustion spark in a way that more quickly ignites the air/fuel mixture, thereby creating a significantly faster and larger flame kernel. The result is that more fuel is put to work durin
- E3’s patented Diamond Fire Technology provides a cleaner burning combustion, which translates into fuel savings and reduced engine carbon deposits
- The Spark Plugs are pre-gapped at the factory and cannot be adjusted.
ACDelco – Conventional Nickel Tip Spark Plug: Maximizes Durability & Heat Transfer (Part No.R45)
from
$6.29
ACDelco Gold (Professional) Conventional Spark Plugs are a high quality alternative to Original Equipment (OE) parts. These Conventional Spark Plugs are designed for reliability and efficient performance, and are the high quality replacements for many vehicles on the road today. Their high-quality copper cores and outstanding suppression characteristics deliver reliable performance. They are also available for Marine applications. These premium aftermarket replacement spark plugs are manufactured to meet your expectations for fit, form, and function. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional.
Product Features:
See More
Product Features:
- Black Onyx coating helps reduce corrosion
- Copper core provides great heat transfer and helps maximize plug durability
- Ribbed suppressor seal extends resistance and helps prevent spark ‘flash over’ and misfires
- Nickel-chrome alloy sheathing helps prevent corrosion on center electrode
- Available for use in Marine applications
- Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
- Premium aftermarket replacement part
- Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
- Nickel Center Electrode Tip: Designed with a nickel center electrode tip, these spark plugs ensure efficient performance and longevity.
- Outstanding Suppression Characteristics: These spark plugs offer excellent suppression characteristics, contributing to their reliable performance in various driving conditions.
- Resistor Type with Gasket Seat: Equipped with a resistor type and a gasket seat, these spark plugs are designed for optimal performance and compatibility with a wide range of vehicles.
Champion – Copper Plus Spark Plug (RJ12C): Dependable Performance & Durability (Part No.592)
from
$2.99
Copper Plus spark plug RJ12C delivers reliable performance and durability, making it an ideal OE-type replacement for your vehicle. Featuring a copper core center electrode, it ensures precise heat control for extended lifespan and consistent wear. The nickel-tipped center and ground electrodes enhance conductivity while resisting fouling, ensuring smooth engine operation. Built to ISO and SAE Standards, this spark plug offers proven performance and superior corrosion resistance, making it a dependable choice for maintaining your vehicle’s efficiency. With a flat seat type and integrated resistor, it is designed to meet the demands of modern engines while providing excellent value and long-lasting functionality.
Product Features:
See More
Product Features:
- Resists fouling
- Superior corrosion resistance
- Dependable and proven performance
- Increased conductivity and heat control for good overall wear
Autolite – Copper Resistor Spark Plug: Quick Starts & Enhanced Durability (Part No.306)
from
$2.99
Autolite Copper spark plugs are expertly crafted to deliver reliable quick starts and the power your vehicle demands for optimal performance. Featuring a copper core center electrode, these plugs excel in thermal control and resist fouling, ensuring consistent operation. The high nickel alloy center and ground electrodes are designed for extended life, while the high alumina multi-rib ceramic insulator enhances thermal conductivity and insulation strength. With a corrosion-resistant nickel-plated shell, these spark plugs offer exceptional durability over time. Engineered to optimize fuel efficiency, they help you achieve better mileage while providing smoother acceleration for an improved driving experience. Meeting or exceeding Original Equipment Service (OES) design Standards, these spark plugs ensure high-quality performance and compatibility. The gasket seat type ensures a secure seal for optimal engine function, while the short projection standard center electrode design and nickel tip materials further enhance reliability. Ideal for regular-grade applications, these spark plugs are a dependable choice for maintaining your vehicle’s performance.
Product Features:
See More
Product Features:
- The copper core center electrode aids in thermal control and improves resistance to fouling.
- Its specially engineered high nickel alloy center and ground electrode provides extended life.
- The high alumina multi-rib ceramic insulator provides thermal conductivity and superior insulation for increased strength.
- Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended periods.
- Good Fuel Economy: Designed to optimize fuel efficiency, these spark plugs help you get the most out of every gallon.
- Smooth Acceleration: Experience smoother acceleration with Autolite Copper Core spark plugs, enhancing overall driving performance.
- OES Design Compliance: These spark plugs meet or exceed Original Equipment Service (OES) design requirements, ensuring high-quality performance.
- Gasket Seat Type: Featuring a gasket seat type, these spark plugs provide a secure and effective seal for optimal engine function.
Dorman – Help – Spark Plug Non-Foulers – 14mm Gasket Seat (Part No.42000)
from
$7.99
This spark plug non fouler is designed for easy installation on specified vehicles to protect spark plugs from fouling and damage. It is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spark plug non fouler is designed for easy installation to protect spark plugs from fouling and damage on specified vehicles
- Ideal solution – this non-fouler preserves spark plug life and is a reliable replacement for an original non-fouler that has failed due to corrosion
- Durable construction – made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Autolite – Copper Non-Resistor Spark Plug: Quick Starts & Reliable Performance (Part No.295DP)
from
$1.99
Autolite Small Engine spark plugs are the perfect solution for keeping your outdoor equipment running smoothly and efficiently. Designed with a high nickel alloy center and ground electrode, these spark plugs deliver extended life and reliable performance for mowers, tractors, chainsaws, snowblowers, leaf blowers, and more. The multi-rib ceramic insulator minimizes the risk of flash-over, while the copper-glass seal ensures a gas-tight bond between the center electrode and terminal post for optimal functionality. Featuring a cold-formed steel shell with precision-rolled threads, these plugs offer enhanced durability and reduced wear, making them a dependable choice for regular-grade applications. With a flat seat type and short projection center electrode, they are engineered for consistent ignition and long-lasting performance. Trust these nickel-tipped spark plugs to keep your small engines operating at their best, season after season.
Product Features:
See More
Product Features:
- Specially engineered high nickel alloy center and ground electrode provides extended life.
- It’s multi-rib ceramic insulator reduces danger of flash-over while its copper-glass seal bonds the center electrode and terminal post, providing a gas-tight internal seal.
- Designed with a cold-formed steel shell precision rolled threads that provide greater durability and reduced wear.
- Features a short projection center electrode and flat seat type, ensuring consistent ignition and reliable performance for small engines.
- Nickel-tipped ground and center electrodes deliver dependable functionality, making them ideal for regular-grade applications.
Champion – Copper Plus Spark Plug (J11C): Dependable Performance & Durability (Part No.511)
from
$2.99
The Copper Plus spark plug is engineered for dependable performance and long-lasting durability, making it an ideal OE-type replacement. Featuring a copper core center electrode, it ensures superior conductivity and precise heat control, which enhances overall wear resistance and extends the plug’s lifespan. Its nickel center and ground electrode tips provide excellent durability, while the standard design ensures compatibility with a wide range of vehicles. Built to ISO and SAE Standards, this spark plug resists fouling and offers superior corrosion resistance, ensuring reliable performance in various conditions. With its flat seat type and proven design, it delivers consistent ignition and optimal engine efficiency, making it a trusted choice for maintaining your vehicle’s performance.
Product Features:
See More
Product Features:
- Resists fouling
- Superior corrosion resistance
- Dependable and proven performance
- Increased conductivity and heat control for good overall wear
In-Demand Ignition Kits for 1951 Chrysler Windsors
Select from 3 premium Ignition Kits parts for your 1951 Chrysler Windsor, with prices ranging from $11.99 to $19.99.
Carquest Premium – Ignition Condenser (Part No.GAA1038)
from
$18.99
An Ignition Capacitor is a device that will absorb excessive voltage spikes in electrical systems. The typical location or use for a capacitor is inside a distributor tied into a point ignition system. The ignition capacitor may also be called a radio capacitor or condenser used in electrical devices which may be susceptible to voltage spikes.
Product Features:
See More
Product Features:
- Application matched component to ensure the system can be returned to like new condition.
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Carquest Premium – Ignition Condenser (Part No.GAA1045)
from
$11.99
An Ignition Capacitor is a device that will absorb excessive voltage spikes in electrical systems. The typical location or use for a capacitor is inside a distributor tied into a point ignition system. The ignition capacitor may also be called a radio capacitor or condenser used in electrical devices which may be susceptible to voltage spikes.
Product Features:
See More
Product Features:
- Application matched component to ensure the system can be returned to like new condition.
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Carquest Premium – Ignition Contact Set (Part No.APA1038)
from
$19.99
The Ignition Contact Set is used in older vehicle applications to ground the ignition coil primary circuit and create the high secondary voltage required in the ignition process. Connected to the contact set is a condenser designed to absorb the high voltage spike created when the contact set opens.
Product Features:
See More
Product Features:
- Application matched component to ensure the system can be returned to like new condition.
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Top-Rated Ignition and Tune-Up Products Brands For Your 1951 Chrysler Windsor
Shop for the best-rated brands offering Ignition and Tune-Up Products and other products for your 1951 Chrysler Windsors. Below you’ll find some of our best rated Ignition and Tune-Up Products from ACDelco, Champion, and Autolite, and more. Ignition and Tune-Up Products from these brands that fit a 1951 Windsor start at just $2.99 and are rated as high as 4.7 stars. OEM and aftermarket Ignition and Tune-Up Products don’t get more top quality, durable, and affordable than from the brands below.
Popular ACDelco 1951 Chrysler Windsor Ignition and Tune-Up Products
When it comes to maintaining or upgrading your 1951 Chrysler Windsor, using quality Ignition and Tune-Up Products is essential to ensure durability and a perfect fit. ACDelco ticks all of those boxes. We offer a wide selection of ACDelco Ignition and Tune-Up Products, specifically designed for the 1951 Chrysler Windsor. With over 1 ACDelco brand Ignition and Tune-Up Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $6.29. Plus, with over 15 customer reviews and an average rating of 4.7 stars, you can trust that our ACDelco Ignition and Tune-Up Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$6.29
(15)
Conventional Nickel Tip Spark Plug: Maximizes Durability & Heat Transfer
“Plug works great for an upgrade or OEM replacemant and will outlast standard plugs with improved reliability. Very good for the price”
Popular Champion 1951 Chrysler Windsor Ignition and Tune-Up Products
Champion auto parts is one of the highest quality Ignition and Tune-Up Product brands in the market. Any 1951 Chrysler Windsor owner should feel confident when installing genuine Champion parts in their vehicle. To ensure the best fit and performance for your 1951 Windsor, Advance Auto Parts carries a full inventory of 1 Champion Ignition and Tune-Up Products. Plus you will be keeping your Chrysler in peak condition while saving money because prices on these Champion Ignition and Tune-Up Products range up to $2.99, plus, with more than 2 customer reviews and an impressive 4.7 stars average rating, you can be confident the Fram Ignition and Tune-Up Products below will deliver on both quality and value.
from
$2.99
(2)
Copper Plus Spark Plug (RJ12C): Dependable Performance & Durability
“Brought a 90s model Briggs and Stratton 18hp back to life after years in the weather.”
FAQs for 1951 Chrysler Windsor Ignition and Tune-Up Products
Which Ignition and Tune-Up Products are best-sellers for 1951 Chrysler Windsors?
Out of 13 Ignition and Tune-Up Products that fit 1951 Chrysler Windsors, the following parts are the top sellers:
- DiamondFIRE Spark Plug: More Power & Fuel Efficiency (19650222) – $8.49
- Copper Plus Spark Plug (RJ12C): Dependable Performance & Durability (18470044) – $2.99
- Copper Non-Resistor Spark Plug: Quick Starts & Reliable Performance (5410800) – $1.99
What’s the price range for 1951 Chrysler Windsor Ignition and Tune-Up Products?
Ignition and Tune-Up Product prices for the 1951 Chrysler Windsor start at $1.99 and go up to $31.99 for the most premium parts.
What’s the average price of a Ignition and Tune-Up Product for a 1951 Chrysler Windsor?
The average price for Ignition and Tune-Up Products for the 1951 Chrysler Windsor is $11.82. Keep in mind the variety of part types within our Ignition and Tune-Up Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Ignition and Tune-Up Products for other Chrysler Windsor model years?
What are the cheapest Ignition and Tune-Up Products for my 1951 Chrysler Windsor?
The cheapest 1951 Chrysler Windsor Ignition and Tune-Up Products we carry in stock are:
- Copper Non-Resistor Spark Plug: Quick Starts & Reliable Performance (5410800) – $1.99
- Copper Plus Spark Plug (RJ12C): Dependable Performance & Durability (18470044) – $2.99
- Copper Resistor Spark Plug: Quick Starts & Enhanced Durability (3290409) – $2.99
- Copper Plus Spark Plug (J11C): Dependable Performance & Durability (11406336) – $2.99
- Conventional Nickel Tip Spark Plug: Maximizes Durability & Heat Transfer (5391105) – $6.29
What are the top-rated Ignition and Tune-Up Products that fit the 1951 Chrysler Windsor?
Out of 56 reviews by customers, our 1951 Chrysler Windsor Ignition and Tune-Up Products have an average customer rating of . These are some of the highest-rated Ignition and Tune-Up Product types for the 1951 Chrysler Windsor and their top-rated products:
- Spark Plugs
- Spark Plug Non-Foulers – 14mm Gasket Seat (5014956) – $7.99
- DiamondFIRE Spark Plug: More Power & Fuel Efficiency (19650222) – $8.49
- Copper Plus Spark Plug (RJ12C): Dependable Performance & Durability (18470044) – $2.99
What types of Ignition and Tune-Up Products do you sell for my 1951 Chrysler Windsor?
As of 11/2/25, these are some of the most in-demand types of Ignition and Tune-Up Products for a 1951 Chrysler Windsor:
Can I get help with 1951 Chrysler Windsor Ignition and Tune-Up Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chrysler Ignition and Tune-Up Products and more.
What is your return policy for Chrysler Windsor Ignition and Tune-Up Products?
Advance Auto Parts keeps returns simple. For new Chrysler Windsor Ignition and Tune-Up Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
