1950 Ford Ranch Wagon Air Intakes
Find Your Specific 1950 Ford Ranch Wagon Air Intakes
Below you will find various in-demand Ford Air Intakes, components and accessories for your 1950 Ranch Wagon. Advance Auto Parts has popular Ranch Wagon parts like Carburetor Kits, Intake Manifold Parts, Carburetor Parts and more. You’ll also find aftermarket and OEM Air Intakes for other Ranch Wagon model years including
1966,
1967,
1968,
1969,
1970,
1971,
1972,
1973,
1974 and more. Select a category of 1950 Ford Ranch Wagon Air Intakes below and start saving instantly.
Popular 1950 Ford Ranch Wagon Air Intakes Categories
Essential Air Intakes for 1950 Ford Ranch Wagons
Mr. Gasket – Intake Gasket (Part No.203G)
from
$41.99
Mr. Gasket Performance Intake Gaskets are manufactured from cellulose/nitrile composition gasket material. They provide excellent sealing and durability. Can be trimmed if necessary for modified port applications. Complete with manifold end seals and distributor gasket (where applicable). For original equipment replacement, high performance street, drag race and oval track.
Product Features:
See More
Product Features:
- Manufactured from cellulose/nitrile composition gasket material
- Provides excellent sealing and durability
- Can be trimmed if necessary for modified port applications
- Complete with manifold end seals and distributor gasket where applicable
- For OE replacement, high performance street, drag race and oval track use
Mr. Gasket – Ultra Seal: Intake Gasket (Part No.5831)
from
$43.99
Ultra-Seal intake manifold gaskets are manufactured from cellulose/nitrile composition gasket material. Provides excellent sealing and durability. Incorporates Silicone beading around each intake and water outlet port to provide additional sealing strength on both sides of each gasket. No gasket sealer required. For OE replacement, high performance street, drag race and oval track use. Includes manifold end seals and distributor gasket.
Product Features:
See More
Product Features:
- Manufactured from cellulose/nitrile composition gasket material
- Provides excellent sealing and durability
- Silicone beading on both sides of each gasket
- Complete with manifold end seals and distributor gasket
- For OE replacement, high performance street, drag race and oval track use
- Creates Tight Leak proof Seal
Felpro – Engine Intake Manifold Gasket Set (Part No.MS 90145)
from
$26.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE – Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Holley – SysteMAX; Intake Manifold Gasket (Part No.108-80)
from
$56.99
Kormetal gasket used between the SysteMax II Ford 5.0 liter upper and lower manifolds.
Product Features:
See More
Product Features:
- SysteMAX II Upper/Lower Manifold
Wells Vehicle Electronics – Carburetor Repair Kit (Part No.2G1784)
from
$22.99
Product Features:
See More
- Application matched component to ensure the system can be returned to like new condition.
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Wells Vehicle Electronics – Carburetor Repair Kit (Part No.2G1760)
from
$63.99
Product Features:
See More
- Application matched component to ensure the system can be returned to like new condition.
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Wells Vehicle Electronics – Carburetor Repair Kit (Part No.2G1764)
from
$38.99
Product Features:
See More
- Application matched component to ensure the system can be returned to like new condition.
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Wells Vehicle Electronics – Carburetor Repair Kit (Part No.2G2059)
from
$47.99
Product Features:
See More
- Application matched component to ensure the system can be returned to like new condition.
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Edelbrock – Performer 351 Intake Manifold for Ford 351- 2V Cleveland Engine (Part No.2750)
from
$437.99Product Features:
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 deg. Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Excellent Throttle Response and Mid-Range Power
- 50-State Street Legal if Correct Carburetor Used
- Accepts both 4V and 2V Carburetors
Edelbrock – Single-Quad Manifold and carb Kit for Small-Block Ford 289-302 (Part No.2033)
from
$1106.99
The Edelbrock #2033 Single-Quad Manifold and carb kit is designed for Small-Block Ford 289-302 applications. With a Manifold and Carb Kit, it’s easy to upgrade your induction system with the best combination of Edelbrock proven performance and looks in a
Product Features:
See More
Product Features:
- Satin Finish
- Single-Quad Manifold
- Thunder Series AVS2 800 cfm Carb
- RPM Air-Gap Manifold
- Made In The USA
Edelbrock – Slingshot Dual-Carb Intake Manifold for 1938-53 Ford Flathead (Part No.1103)
from
$703.99
Edelbrock part #1103 Slingshot intake manifold for 1938-48 engines is a reproduction of the original intake manifold designed by Vic Edelbrock Sr. in 1938. The Slingshot is a real show stopper and even includes stainless acorn nuts for mounting the two ha
Product Features:
See More
Product Features:
- Slingshot Manifold
- Dual Plane Type-3-Bolt Style Flange
- 7.625 in. Front Height, 7.625 in. Center Height, 7.625 in. Rear Height
- Satin Finish
- Made In The USA
Edelbrock – RPM Air-Gap Small Block Ford Polished Intake Manifold (Part No.75811)
from
$811.99
Based on performer RPM-series with unique air gap. Air gap cooler and denser mixture for more power. Designed for 1500 to 6500 RPM. Improve performance on the street or race track. Larger cross-sectional area and taller card flange. Compatibility with lar
Product Features:
See More
Product Features:
- Based on Performer RPM-Series with Unique Air Gap
- Air Gap Cooler and Denser Mixture for More Power
- Designed For 1500 To 6500 RPM
- Designed For Street And High Performance
- Larger Cross Sectional Area
- Taller Carb Flange
- Compatibility w/Large Displacement 351W Based Eng.
Edelbrock – RPM Air-Gap Small Block Ford 302 Black Intake Manifold (Part No.75213)
from
$605.99
Edelbrock part #75213 RPM Air-Gap intake manifold is designed for street 289 302-347 c.i.d. Ford V8’s. The RPM Air-Gap incorporates the same race-winning technology that’s been used on our Victor Series competition intakes for decades. The Air-Gap design
Product Features:
See More
Product Features:
- 1500-6500 RPM Range
- Dual Plane Type-4150 Style Flange
- 4.3 in. Front Height, 4.9 in. Center Height, 5.5 in. Rear Height
- Black Powder Coated Finish
- Made In The USA
Edelbrock – Carburetor Adapter Flange 1949-53 Ford Flathead 4-bbl Manifold/Square-Bore Carbs (Part No.1106)
Dorman – Help – Rubber Expansion Plug 1-5/8 In. – Size Range 1-5/8 In. – 1-3/4 In. (Part No.10232)
from
$5.99
Our Engine Intake Manifold Expansion Plug is conveniently designed as a direct replacement for stripped plugs. A proper fit is ensured, every time.
Product Features:
See More
Product Features:
- Manufactured from high quality materials for a long service life
- Torque values listed on parts (where applicable)
- Easy to install
- Constructed to strict engineering quality standards
Dorman – Steel Cup Expansion Plug 1 In., SC, Height 0.250 (sold by each) (Part No.555-018)
from
$2.99
This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Holley – 4150 Race Carbs (Part No.0-67199BK)
from
$821.99
4150 Race Carbs
Holley – Professional Race Carburetor: 1050 CFM, No Choke, 4 Barrel, 4500 Bore, Dual Inlet, Shiny (Part No.0-80903RD)
from
$1649.99
The Gen 3 utilizes high capacity fuel bowls which feature 20% more fuel capacity to eliminate starvation, integrated fuel shelf to minimize fuel aeration and internal baffling to control fuel slosh. Other features include all aluminum construction, 12 hole billet booster inserts, fully tunable billet metering blocks, adjustable external linkage, throttle position sensor mounting points and knurled (hand adjustable) curb idle screws Each calibration has been dyno and track tested to deliver proven performance!
Product Features:
See More
Product Features:
- All Aluminum Construction Saves 3.8 lbs. Over Original Models
- 28% Weight Savings
- Calibrations For Todays Larger Race Engines and New Fuels
- Fully Machined From Venturi Throat To Throttle Bore
- Integrated Idle Bypass Valve Allows For Adjustment Of Idle
- 12 Hole Billet Booster Superior Atomization/Throttle Response
- Metering Blocks Feature Improved True Gasket Sealing
- Dual 50CC Accelerator Pumps Fuel From Idle To Full Throttle
- Fuel Bowl Provides 20% More Fuel Capacity Controls Slosh
- Clear Sight Windows On Sides Of Bowl For Fuel Level Adjustments
- Drain Plug On Bowl Provides Easy Access To Empty Bowl
- Contoured Hex Head Squirter Screws For Streamlined Airflow
Holley – Street Carburetor: 600 CFM, Manual Choke, 4 Barrel, Square Bore, Single Inlet, Gold Dichromate (Part No.0-1850C)
from
$599.99
The Street HP uses the best features from Holley’s race Bred 4150 HP carbs, but tamed for street and light competition use. The contoured main body from the 4150 HP has a tumble polished shiny finish. The metering system includes a timed spark port for a vacuum advance distributor and is calibrated for a hot street and strip engine setup for outstanding throttle response and drivability. A street HP base plate is used so there are plenty of vacuum ports for power brakes, PCV, etc.
Product Features:
See More
Product Features:
- Gold Dichromate Finish For Corrosion Resistance w/Classic Look
- Performance Upgrade For Stock To Mildly Modified Vehicles
- Universal Calibration For Easy Bolt-On Performance
- Man. Choke Cable Hand Controlled For Cold Start Control
- Vacuum Secondaries For Use On Wide Variety Of Vehicles
- Single Feed Fuel Inlet For Easy Installation
- Power Valve Blow Out Protection
- 100% Wet Flow Tested By Holley Technicians
- Arrives Ready To Run
- Compensates For All Vehicle Weights Gearing/Transmissions
Holley – Professional Race Carburetor: 1050 CFM, No Choke, 4 Barrel, 4500 Bore, Dual Inlet, Shiny (Part No.0-80903BK)
from
$1649.99
The Gen 3 utilizes high capacity fuel bowls which feature 20% more fuel capacity to eliminate starvation, integrated fuel shelf to minimize fuel aeration and internal baffling to control fuel slosh. Other features include all aluminum construction, 12 hole billet booster inserts, fully tunable billet metering blocks, adjustable external linkage, throttle position sensor mounting points and knurled (hand adjustable) curb idle screws Each calibration has been dyno and track tested to deliver proven performance!
Product Features:
See More
Product Features:
- All Aluminum Construction Saves 3.8 lbs. Over Original Models
- 28% Weight Savings
- Calibrations For Todays Larger Race Engines and New Fuels
- Fully Machined From Venturi Throat To Throttle Bore
- Integrated Idle Bypass Valve Allows For Adjustment Of Idle
- 12 Hole Billet Booster Superior Atomization/Throttle Response
- Metering Blocks Feature Improved True Gasket Sealing
- Dual 50CC Accelerator Pumps Fuel From Idle To Full Throttle
- Fuel Bowl Provides 20% More Fuel Capacity Controls Slosh
- Clear Sight Windows On Sides Of Bowl For Fuel Level Adjustments
- Drain Plug On Bowl Provides Easy Access To Empty Bowl
- Contoured Hex Head Squirter Screws For Streamlined Airflow
Holley – Performance and Race Carburetor: 750 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny (Part No.0-76750BL)
from
$899.99
Holley Double Pumper(R) carburetors are a perfect performance upgrade for hot street cars and race vehicles. Double Pumper carburetors are an American icon when it comes to performance carburetors. From their roots as the premier carburetor on many factory muscle cars to powering thousands of vehicles across the finish line, the Double Pumper is a great choice whether you are burning up the street or the quarter mile.
Product Features:
See More
Product Features:
- Metering Blocks Base Plate For Good Looks True Gasket Sealing
- Optimized Street/Strip Calibration That Works Out Of The Box
- Factory Preset Electric Choke For Easy Startups
- Mechanical Secondaries For Awesome Tire Turning Performance
- 4 Corner Idle Allows You To Precisely Control Your Idle System
- Clear Fuel Level Sight Glass No Mess Fuel Level Adjustments
- Aluminum Construction For A 43% Weight Savings
- Lightweight Vehicles w/Auto Trans w/High Stall/Low Gearing
- 100% Wet Flow Tested By Holley Technicians
- Arrives Ready To Run
Edelbrock – Performer 1411 Carburetor: 750 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No.1411)
from
$519.99
The Edelbrock 1411 Performer Series 750 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characterist
Product Features:
See More
Product Features:
- Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
- Electric Choke
- 4 Barrel Count
- Square Bore
- Smooth Secondary Transition
- Both Timed and Full Vacuum Ports
- Includes PCV Outlet
Holley – Performance and Race Carburetor: 650 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny (Part No.0-76650BL)
from
$899.99
Holley Double Pumper(R) carburetors are a perfect performance upgrade for hot street cars and race vehicles. Double Pumper carburetors are an American icon when it comes to performance carburetors. From their roots as the premier carburetor on many factory muscle cars to powering thousands of vehicles across the finish line, the Double Pumper is a great choice whether you are burning up the street or the quarter mile.
Product Features:
See More
Product Features:
- Metering Blocks Base Plate For Good Looks True Gasket Sealing
- Optimized Street/Strip Calibration That Works Out Of The Box
- Factory Preset Electric Choke For Easy Startups
- Mechanical Secondaries For Awesome Tire Turning Performance
- 4 Corner Idle Allows You To Precisely Control Your Idle System
- Clear Fuel Level Sight Glass No Mess Fuel Level Adjustments
- Aluminum Construction For A 43% Weight Savings
- Lightweight Vehicles w/Auto Trans w/High Stall/Low Gearing
- 100% Wet Flow Tested By Holley Technicians
- Arrives Ready To Run
United Carb – Remanufactured Carburetor 2 Barrel (Part No.7-7187)
from
$252.99
Made in the USA, this remanufactured carburetor is completely disassembled and all internal parts, such as gaskets, gas filters, needle/seats and accelerator plunger cups, are discarded. All metal castings are thoroughly cleaned and restored to OEM (original equipment manufacturer) finish. Then the carburetor is reassembled to OEM-quality standards using all new component parts. Each carburetor is flow tested to simulate actual engine conditions, and all internal and external adjustments are set to OEM specifications.
See More
Holley – Professional Race Carburetor: 1150 CFM, No Choke, 4 Barrel, 4500 Bore, Dual Inlet, Shiny (Part No.0-80690)
from
$1299.99
Holley engineers have taken the state-of-the-art Gen 3 Ultra carburetors and created a budget friendly version that is perfect for street/strip applications as well as all out bracket or sportsman drag cars. The new Holley SP Dominator carburetors feature the patent pending Gen 3 main-body which is 5/16″ taller than the previous generation! This new height allowed for larger radius air entries to deliver smoother flow that equates to improved throttle response and consistency. An extended air cleaner flange is incorporated for easy air scoop attachment when using the available air scoop adapter. Other features include all aluminum construction, tunable billet metering blocks, throttle position sensor mounting points and knurled (hand adjustable) curb idle screws. Each calibration has been dyno and track tested to deliver proven performance!
Product Features:
See More
Product Features:
- All Aluminum Construction Saves 3.8 lbs. Over Original Models
- 28% Weight Savings
- Shiny With Billet Aluminum Metering Block and Black Hardware
- Calibrations Optimized For Todays Race Engines and New Fuels
- Fully Machined From Venturi Throat To Throttle Bore For Perf
- Annular Booster Deliver Excellent Signal and Throttle Response
- Screw In Air Bleeds Offer Precise Tuning Capabilities
- Metering Blocks Feature Improved True Gasket Sealing
- Dual 50CC Accelerator Pumps Fuel From Idle To Full Throttle
- 4 Corner Idle Allows You To Precisely Control Your Idle System
- Clear Sight Windows On Fuel Inlet Side For Fuel Level Adjustment
- Notched Float and Jet Extension Are Factory Installed
Holley – Street Carbs (Part No.0-1850S)
from
$480.99
The Street HP uses the best features from Holley’s race Bred 4150 HP carbs, but tamed for street and light competition use. The contoured main body from the 4150 HP has a tumble polished shiny finish. The metering system includes a timed spark port for a
Product Features:
See More
Product Features:
- Vibratory Polished Alum Good Looks/Weight Savings/Lasting Shine
- Performance Upgrade For Stock To Mildly Modified Vehicles
- Universal Calibration For Easy Bolt-On Performance
- Man. Choke Cable Hand Controlled For Cold Start Control
- Vacuum Secondaries For Use On Wide Variety Of Vehicles
- Single Feed Fuel Inlet For Easy Installation
Edelbrock – Performer Remanufactured Carburetor, 600 CFM With Manual Choke, Satin Finish (Non-EGR) (Part No.9905)
from
$437.99
The Edelbrock 9905 Remanufactured Performer Series 600 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 9905 Remanufactured Performer Series 600 CFM manual choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to “hold a tune”, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation.
See More
Holley – Professional Race Carburetor: 650 CFM, No Choke, 4 Barrel, Square Bore, Dual Inlet, Hard Core Gray (Part No.0-80802HBX)
from
$1299.99
Xtreme Performance – Holley Ultra XP(TM) Circle Track Carburetors! Ultra XP carbs are 38% lighter than our original HP, have fuel capacity that is 20% greater and 30 other new features! They’re available in our Hard Core Gray(TM) hard coat anodized finish with Black(TM) billet for improved corrosion protection & also available in natural tumble-polished aluminum with Black(TM) metering blocks and base plate. The Aluminum Ultra XP Cirlce Tracks are available in 650 & 750 CFM’s. Holley Ultra XP carburetors are Specifically Calibrated for Circle Track & offer new features such as anti-siphon valve in the main body; high capacity HP bowls which feature 20% more fuel capacity to eliminate starvation, integrated fuel shelf to minimize fuel aeration and internal baffling to control fuel slosh. Other features include all aluminum construction, fully tunable billet metering blocks, billet base plate, wedge floats, adjustable secondary linkage and knurled (hand adjustable) curb idle screws. Holley Ultra XP carburetors are the ultimate in square bore race carburetors!
Product Features:
See More
Product Features:
- Aluminum Construction
- Saves 4.5 Pounds 38% Weight Savings
- Contoured Venturi Inlet Balances Airflow For Increased hp
- Air Bleeds Moved Outward For Smoother Transition Of Airflow
- Metering Blocks/True Gasket Sealing/Fully Adjustable
- Idle Bypass Valve Eliminates Holes In Throttle Plates
- Dual 30CC Accelerator Pumps Fuel From Idle To Full Throttle
- Fuel Bowls Provide 20% More Fuel Capacity Controls Slosh
- Clear Sight Windows On Both Sides Of Bowls For Safe Fuel Level
- Drain Plug On Bowl Provides Easy Access To Empty Bowl
- 8AN O-Ringed Inlet Threads Offer A Variety Of Plumbing Options
- 4 Corner Idle Allows You To Precisely Control Your Idle System
Upgrade your 1950 Ford Ranch Wagon with Top-Quality Air Intakes
When it comes to maintaining or upgrading your 1950 Ford Ranch Wagon, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Air Intakes are key to keeping your Ranch Wagon functioning at its best. At Advance Auto Parts, we offer a wide selection of 15 Air Intakes for the 1950 Ford Ranch Wagon, designed to meet your needs without breaking the bank.
From
Carburetor Kit
replacements to
Intake Manifold Parts
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Air Intakes for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Air Intakes for your 1950 Ford Ranch Wagon at great prices.
Our Air Intakes inventory for this model
ranges from just $5.99 to $703.99, with
an average price of $306.92.
Our 15 Air Intakes in stock come from 5 trusted brands, so you’re sure to find the right part for your 1950 Ford Ranch Wagon without overspending.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Air Intake upgrades. Explore related part types like Fluids and Chemicals, Alternators and Starters
and more to make sure your 1950 Ford Ranch Wagon is always ready to roll. We’re committed to providing you with everything you need to keep your Ranch Wagon in top shape, all in one place.
Start shopping confidently below for your 1950 Ford Ranch Wagon!
Best-Selling Carburetor Kits for 1950 Ford Ranch Wagons
Enhance the driving experience in your Ford with 3 quality Carburetor Kit components, starting at $15.99.
Wells Vehicle Electronics – Carburetor Repair Kit (Part No.2G1760)
from
$63.99
Product Features:
See More
- Application matched component to ensure the system can be returned to like new condition.
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Wells Vehicle Electronics – Carburetor Repair Kit (Part No.2G1777)
from
$36.99
Product Features:
See More
- Application matched component to ensure the system can be returned to like new condition.
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Wells Vehicle Electronics – Carburetor Repair Kit (Part No.2G1914)
from
$15.99
Product Features:
See More
- Application matched component to ensure the system can be returned to like new condition.
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Most Popular 1950 Ford Ranch Wagon Intake Manifold Parts
Customize your Ford with 7 Intake Manifold Parts products
like Intake Manifold Gasket Sets,
Intake Manifolds, and
Intake Manifold Expansion Plugs, all
priced under $703.99.
Dorman – Help – Rubber Expansion Plug 1-5/8 In. – Size Range 1-5/8 In. – 1-3/4 In. (Part No.10232)
from
$5.99
Our Engine Intake Manifold Expansion Plug is conveniently designed as a direct replacement for stripped plugs. A proper fit is ensured, every time.
Product Features:
See More
Product Features:
- Manufactured from high quality materials for a long service life
- Torque values listed on parts (where applicable)
- Easy to install
- Constructed to strict engineering quality standards
Edelbrock – Slingshot Dual-Carb Intake Manifold for 1938-53 Ford Flathead (Part No.1103)
from
$703.99
Edelbrock part #1103 Slingshot intake manifold for 1938-48 engines is a reproduction of the original intake manifold designed by Vic Edelbrock Sr. in 1938. The Slingshot is a real show stopper and even includes stainless acorn nuts for mounting the two ha
Product Features:
See More
Product Features:
- Slingshot Manifold
- Dual Plane Type-3-Bolt Style Flange
- 7.625 in. Front Height, 7.625 in. Center Height, 7.625 in. Rear Height
- Satin Finish
- Made In The USA
Edelbrock – Ford Flathead 4-Barrel Intake Manifold for 1949-53 Ford Flathead, Satin Finish (Part No.1107)
from
$617.99
Product Features:
See More
- Flathead 4-Barrel Manifold
- Dual Plane Type-4150 Style Flange
- 4.06 in. Front Height, 5.06 in. Center Height, 6.06 in. Rear Height
- Satin Finish
- Made In The USA
Edelbrock – Triple Deuce Intake Manifold for 1949-53 Ford Flathead, Satin Finish (Part No.1109)
from
$519.99
Edelbrock part #1109 Triple Deuce intake manifold is a reproduction of the vintage Edelbrock manifold #SU 349 allow the use of three 2-barrel carburetors on 1949-1953 Ford Flathead engines. #1109 features front road draft and 1-3/8″ diameter oil fill boss
Product Features:
See More
Product Features:
- Triple Deuce Manifold
- Dual Plane Type 6-Pack 3-Bolt Style Flange
- 3.66 in. Front Height, 3.66 in. Center Height, 3.66 in. Rear Height
- Satin Finish
- Made In The USA
Edelbrock – GASKETS (Part No.7234)
from
$46.99
GASKETS
Edelbrock – GASKETS (Part No.8700)
from
$19.99
GASKETS
Felpro – Engine Intake Manifold Gasket Set (Part No.MS 8903)
from
$16.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for repair applications
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Includes all parts needed to complete the repair
- Includes all parts needed to complete the repair
Top Picks for 1950 Ford Ranch Wagon Carburetor Parts
Upgrade Ford Ranch Wagons with top-quality Carburetor Parts parts, including 5 OEM and aftermarket selections for your 1950 model.
Holley – Street Carburetor: 500 CFM, Manual Choke, 2 Barrel, 2300 Bore, Single Inlet, Shiny (Part No.0-4412S)
from
$534.99
The 0-4412 is designed as a stock replacement for 2BBL street applications as well as being mandated for some oval track racing sanctioning bodies. Whether you are looking for a replacement carburetor to replace your tired and worn factory 2BBL or one to push you to the finish line on Saturday night, the Holley 0-4412 Performance 2BBL is the perfect choice.
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
- Man. Choke Cable Hand Controlled For Cold Start Control
- 50CC Accelerator Pump For Add. Fuel Under Initial Acceleration
- Power Valve Blow-Out Protection
- 100% Wet-Flow Tested To Assure It Arrives Ready To Run
Holley – Street Carburetor: 500 CFM, Manual Choke, 2 Barrel, 2300 Bore, Single Inlet, Gold Dichromate (Part No.0-4412C)
from
$649.99
The 0-4412 is designed as a stock replacement for 2BBL street applications as well as being mandated for some oval track racing sanctioning bodies. Whether you are looking for a replacement carburetor to replace your tired and worn factory 2BBL or one to
Product Features:
See More
Product Features:
- Gold Dichromate Finish For Corrosion Resistance w/Classic Look
- Man. Choke Cable Hand Controlled For Cold Start Control
- 50CC Accelerator Pump For Add. Fuel Under Initial Acceleration
- Power Valve Blow-Out Protection
- 100% Wet-Flow Tested To Assure It Arrives Ready To Run
- Does Not Work w/A.O.D. Transmissions
- Installation/Tuning DVD Incl.
Holley – Performance and Race Carburetor: 500 CFM, No Choke, 2 Barrel, 2300 Bore, Single Inlet (Part No.0-4412CT)
from
$649.99
Competition fuel curves provide safe and reliable horsepower for high performance race engines.
Product Features:
See More
Product Features:
- Gold Dichromate Finish For Corrosion Resistance w/Classic Look
- Man. Choke Cable Hand Controlled For Cold Start Control
- 50CC Accelerator Pump For Add. Fuel Under Initial Acceleration
- Power Valve Blow-Out Protection
- 100% Wet-Flow Tested To Assure It Arrives Ready To Run
Holley – Street Carburetor: 500 CFM, Electric Choke, 2 Barrel, 2300 Bore, Single Inlet, Shiny (Part No.0-80500)
from
$599.99
Street Avenger carburetors are known to bolt on right out of the box and Holley is excited to announce the addition of our new 2bbl Street Avenger models available in 350 and 500 CFM. Street Avenger carburetors have great features such as optimized street calibrations; three vacuum ports for all necessary vacuum accessories; factory preset electric choke for easy startups; built-in fuel filters; and an included 3/8″ fuel line connection so there are no unnecessary trips back to the parts store.
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
- Optimized Street Calibration That Works Out Of The Box
- Factory Preset Electric Choke For Easy Startups
- Built In No Trouble Fuel Inlet Filter
- Provides Precise Fuel Control For Low End Torque/Acceleration
- Gen Iv No Trouble Power Valve
- Three Vacuum Ports [1 Pcv/Brake 1 Timed Spark 1 Full]
- Limited Lifetime Warranty Defects In Material/Workmanship
- 100% Wet Flow Tested By Holley Technicians
- Arrives Ready To Run
Edelbrock – Carburetor Adapter Flange 1949-53 Ford Flathead 4-bbl Manifold/Square-Bore Carbs (Part No.1106)
FAQs for 1950 Ford Ranch Wagon Air Intakes
Which Air Intakes are best-sellers for 1950 Ford Ranch Wagons?
Out of 15 Air Intakes that fit 1950 Ford Ranch Wagons, the following parts are the top sellers:
- Street Carburetor: 500 CFM, Manual Choke, 2 Barrel, 2300 Bore, Single Inlet, Shiny (6121764) – $534.99
- Engine Intake Manifold Gasket Set (19780861) – $16.99
- Carburetor Repair Kit (12592329) – $15.99
What’s the price range for 1950 Ford Ranch Wagon Air Intakes?
Air Intake prices for the 1950 Ford Ranch Wagon start at $5.99 and go up to $703.99 for the most premium parts.
What’s the average price of a Air Intake for a 1950 Ford Ranch Wagon?
The average price for Air Intakes for the 1950 Ford Ranch Wagon is $306.92. Keep in mind the variety of part types within our Air Intake category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Air Intakes for other Ford Ranch Wagon model years?
What are the cheapest Air Intakes for my 1950 Ford Ranch Wagon?
The cheapest 1950 Ford Ranch Wagon Air Intakes we carry in stock are:
- Rubber Expansion Plug 1-5/8 In. – Size Range 1-5/8 In. – 1-3/4 In. (22140133) – $5.99
- Carburetor Repair Kit (12592329) – $15.99
- Engine Intake Manifold Gasket Set (19780861) – $16.99
- GASKETS (50279448) – $19.99
- Carburetor Repair Kit (12592521) – $36.99
What are the top-rated Air Intakes that fit the 1950 Ford Ranch Wagon?
Out of 1 reviews by customers, our 1950 Ford Ranch Wagon Air Intakes have an average customer rating of . These are some of the highest-rated Air Intake types for the 1950 Ford Ranch Wagon and their top-rated products:
- Intake Manifold Parts
- Rubber Expansion Plug 1-5/8 In. – Size Range 1-5/8 In. – 1-3/4 In. (22140133) – $5.99
What types of Air Intakes do you sell for my 1950 Ford Ranch Wagon?
As of 11/2/25, these are some of the most in-demand types of Air Intakes for a 1950 Ford Ranch Wagon:
Can I get help with 1950 Ford Ranch Wagon Air Intake orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Air Intakes and more.
What is your return policy for Ford Ranch Wagon Air Intakes?
Advance Auto Parts keeps returns simple. For new Ford Ranch Wagon Air Intakes and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
