1948 Pontiac Torpedo Ignition and Tune-Up Products
More 1948 Pontiac Torpedo Ignition and Tune-Up Products Categories
If you’re looking for an original Ignition and Tune-Up Products replacement for a 1948 Pontiac Torpedo, you can search through our selection below. You’ll also find aftermarket and OEM Ignition and Tune-Up Products to meet your needs.
Essential 1948 Pontiac Torpedo Ignition and Tune-Up Products
Carquest – Ignition Condenser, Capacitance Rating: 0.18-0.23 (Part No.G102A)
from
$16.99
Product Features:
See More
- Offering hundreds of high-quality pigtails & sockets for nearly every electrical job
- Utilizing high grade materials to ensure peak conductivity and perfect connections
Carquest Premium – Ignition Contact Set (Part No.APA1021)
from
$28.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Ignition Condenser (Part No.GAA1039)
from
$15.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
PerTronix – 808415 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 115 Degree Red (Part No.808415)
from
$81.99
8mm Custom fit MAGx2 wires are available for many popular applications equipped with Flame-Thrower or original GM HEI distributors. Our custom wire sets have factory terminated ends for a superior connection and perfect fit, without cuttting, crimping and
Product Features:
See More
Product Features:
- PerTronix 808415 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 115 Degree Red
- Two current paths for reliability and redundancy. -Primary path: Spiral wound stainless steel alloy.-Secondary path: Carbon impregnated fiberglass center core.
Mallory – Mallory Prosidewinder 90F Univ. Wire Set (Part No.937)
from
$133.99
Features at a glance, low 300 Ohm resistance spiral core delivers high energy output for maximum spark at the plug. Great RFI suppression meets the demands of today’s on-board electronics, such as electronic ignition, sound systems, and computer controls. 8MM ozone-resistant red silicone jacket repels water, oil, grease, and fuel, and withstands temperatures up to 500 degrees. Fits V8, universal wire kit: includes 45 degree spark plug boots, female socket (standard) distributor boots and terminals.
Product Features:
See More
Product Features:
- Most Advanced Wire By Mallory
- RFI Suppression
- High Temperature Silicone Jacket
- Withstands Over 500+F
- Come In Ready To Use Kits
- Extra Long Kits
Mallory – Mallory Prosidewinder 135F Univ/Wire Set (Part No.947)
from
$153.99
Features at a glance, low 300 Ohm resistance spiral core delivers high energy output for maximum spark at the plug. Great RFI suppression meets the demands of today’s on-board electronics, such as electronic ignition, sound systems, and computer controls. 8MM ozone-resistant red silicone jacket repels water, oil, grease, and fuel, and withstands temperatures up to 500 degrees. Fits V8, universal wire kit: includes 45 degree spark plug boots, female socket (standard) distributor boots and terminals.
Product Features:
See More
Product Features:
- Most Advanced Wire By Mallory
- RFI Suppression
- High Temperature Silicone Jacket
- Withstands Over 500+F
- Come In Ready To Use Kits
- Extra Long Kits
PerTronix – 808480 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 180 Degree Red (Part No.808480)
from
$82.99
8mm Custom fit MAGx2 wires are available for many popular applications equipped with Flame-Thrower or original GM HEI distributors. Our custom wire sets have factory terminated ends for a superior connection and perfect fit, without cuttting, crimping and
Product Features:
See More
Product Features:
- PerTronix 808480 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 180 Degree Red
- Two current paths for reliability and redundancy. -Primary path: Spiral wound stainless steel alloy.-Secondary path: Carbon impregnated fiberglass center core.
Carquest Premium – Ignition Conversion Kit (Part No.CBA1756)
from
$234.99
Ignition Conversion Kit
Carquest Premium – Ignition Conversion Kit (Part No.CBA1798)
from
$411.99
Ignition Conversion Kit
ACDelco – Conventional Nickel Tip Copper Core Spark Plug: Maximizes Durability & Heat Transfer (Part No.R45)
from
$4.99
ACDelco Gold (Professional) Conventional Spark Plugs are a high quality alternative to Original Equipment (OE) parts. These Conventional Spark Plugs are designed for reliability and efficient performance, and are the high quality replacements for many vehicles on the road today. Their high-quality copper cores and outstanding suppression characteristics deliver reliable performance. They are also available for Marine applications. These premium aftermarket replacement spark plugs are manufactured to meet your expectations for fit, form, and function. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional.
Product Features:
See More
Product Features:
- Black Onyx coating helps reduce corrosion
- Copper core provides great heat transfer and helps maximize plug durability
- Ribbed suppressor seal extends resistance and helps prevent spark ‘flash over’ and misfires
- Nickel-chrome alloy sheathing helps prevent corrosion on center electrode
- Available for use in Marine applications
- Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
- Premium aftermarket replacement part
- Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
- Nickel Center Electrode Tip: Designed with a nickel center electrode tip, these spark plugs ensure efficient performance and longevity.
- Outstanding Suppression Characteristics: These spark plugs offer excellent suppression characteristics, contributing to their reliable performance in various driving conditions.
- Resistor Type with Gasket Seat: Equipped with a resistor type and a gasket seat, these spark plugs are designed for optimal performance and compatibility with a wide range of vehicles.
Champion – Copper Plus Small Engine Spark Plug Dependable Performance, OE Replacement RJ12C (Part No.592)
from
$2.49
Dependable performance. This Champion® spark plug features a copper core electrode that provides increased conductivity and heat control for good overall wear.
Product Features:
See More
Product Features:
- Copper Plus – Dependable Performance and Durability
- OE type replacement plug
- Resists fouling
- Copper core center electrode allows for accurate control of heat range for longer life
- Superior corrosion resistance
- Built to ISO and SAE standards for proven performance
Dorman – Help – Spark Plug Non-Foulers – 14mm Gasket Seat (Part No.42000)
from
$5.49
This spark plug non fouler is designed for easy installation on specified vehicles to protect spark plugs from fouling and damage. It is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spark plug non fouler is designed for easy installation to protect spark plugs from fouling and damage on specified vehicles
- Ideal solution – this non-fouler preserves spark plug life and is a reliable replacement for an original non-fouler that has failed due to corrosion
- Durable construction – made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Autolite – Copper Spark Plug: Delivers Quick Starts, Good Fuel Economy, Smooth Acceleration (Part No.306)
from
$1.99
Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Guaranteed to deliver quick starts, good fuel economy and smooth acceleration, Autolite Copper Core spark plugs are designed to meet or exceed OES design requirements. Consider upgrading to Autolite Platinum, Double Platinum or Iridium XP plugs for improved engine performance. Copper core plugs are the industry standard.
Product Features:
See More
Product Features:
- Copper-glass seal bonds insulator, terminal post center electrode together; assures full required voltage at spark gap; gas-tight seal (100% leak proof)
- Multi-rib insulator reduces danger of “flash-over”
- One-piece terminal post adds strength
- Resistor reduces radio frequency interference (RFI) and electrode erosion
- Quick Starts: Autolite Copper Core spark plugs are engineered to ensure quick and reliable engine starts.
- Good Fuel Economy: Designed to optimize fuel efficiency, these spark plugs help you get the most out of every gallon.
- Smooth Acceleration: Experience smoother acceleration with Autolite Copper Core spark plugs, enhancing overall driving performance.
- OES Design Compliance: These spark plugs meet or exceed Original Equipment Service (OES) design requirements, ensuring high-quality performance.
- Gasket Seat Type: Featuring a gasket seat type, these spark plugs provide a secure and effective seal for optimal engine function.
Autolite – Small Engine Display Pack (Part No.295DP)
from
$1.99
Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Designed and engineered in the USA, Autolite Double Platinum spark plugs feature platinum-to-platinum firing which virtually eliminates gap erosion, reduces misfires and increases durability of the plug. Consider upgrading to Autolite Iridium XP spark plugs for increased performance.
Product Features:
See More
Product Features:
- Copper-glass seal bonds insulator, terminal post center electrode together; assures full required voltage at spark gap; gas-tight seal (100% leak proof)
- Multi-rib insulator reduces danger of “flash-over”
- One-piece terminal post adds strength
- Resistor reduces radio frequency interference (RFI) and electrode erosion
NGK – OE Series Standard Nickel Spark Plug: Conventional Tip Design, B-4 (Part No.3210)
from
$3.49
NGK Standard spark plugs (in the iconic NGK ‘yellow box’ packaging) are a proven OE cornerstone and technology customers have relied on for decades. Engineered specifically for OE applications, NGK Standard spark plugs provide OE quality nickel alloy reliable performance and design. NGK’s legendary high grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance, while triple gasket sealing prevents combustion gas leakage. Solid 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges. Trivalent metal plating ensures superior anti-corrosion and anti-seizing properties.
Product Features:
See More
Product Features:
- ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction nickel alloy center electrode provides consistent performance
- RECOMMENDED USAGE: Best for vehicles with OE nickel alloy plugs, not recommended on vehicles with factory precious metal plugs
- NGK’s OE CERAMIC TECHNOLOGY: High grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance
- SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
- COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
- TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
Carquest Premium – Distributor Rotor (Part No.DAA1413)
from
$12.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest – Ignition Coil (Part No.E5)
from
$23.05
BWD® is an aftermarket leader, providing a premium line of engine management products. BWD® manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD® is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.
Product Features:
See More
Product Features:
- Manufactured using high-quality materials to provide superior durability and long service life
- Designed and engineered to ensure precise performance
- A full E-Lam core of silicon steel and solid brass high voltage terminals protects against corrosion. Our ignition coils are built for maximum output voltage
- Primary and Secondary windings feature enamel magnet wire for the highest temperature rating in the aftermarket
- As a tier I manufacturer with engineering and design capabilities second to none, our ignition coils are made to the highest quality standards
Carquest Premium – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.EBC1521)
from
$16.49
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
- 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
- Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure confidence and product reliability, every time.
Popular 1948 Pontiac Torpedo Ignition and Tune-Up Products Categories
1948 Pontiac Torpedo Ignition and Tune-Up Products
You count on your 1948 Pontiac Torpedo to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Ignition and Tune-Up Products. With 15 Ignition and Tune-Up Products ranging in price from $1.99 to $411.99, you’re sure to find everything you need for your 1948 Pontiac Torpedo.
Brands matter. If you want to shop a specific Ignition and Tune-Up Products brand, we stock 8 different brands like E3, ACDelco, and Autolite. 1948 Pontiac Torpedo Ignition and Tune-Up Products start as low as $1.99!
One of the best ways to find top quality OEM or aftermarket Ignition and Tune-Up Products is by asking professionals. Short of that, you can shop with confidence thanks to our 59 extensive product reviews on 1948 Pontiac Torpedo Ignition and Tune-Up Products. Some of the top-rated Ignition and Tune-Up Products products we carry are Copper Spark Plug: Delivers Quick Starts, Good Fuel Economy, Smooth Acceleration with 5.0 stars and Mallory Prosidewinder 135F Univ/Wire Set with 5.0 stars.
Did we mention you can order your Ignition and Tune-Up Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Ignition and Tune-Up Products inventory for your 1948 Pontiac Torpedo below to get started!
Top-Rated Ignition and Tune-Up Products Brands For Your 1948 Pontiac Torpedo
Trusted Ignition and Tune-Up Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1948 Pontiac Torpedo running right for years to come. In our inventory you’ll find brands like E3, ACDelco, Autolite, and even more.
Popular ACDelco Ignition and Tune-Up Products
You’ll find popular ACDelco brand products across Spark Plugs. All are waiting to get your 1948 Pontiac Torpedo back on the road. Some of the top-rated ACDelco products in these categories are:
from
$4.99
(15)
Conventional Nickel Tip Copper Core Spark Plug: Maximizes Durability & Heat Transfer
Spark Plugs
FAQs for 1948 Pontiac Torpedo Ignition and Tune-Up Products
What are the most purchased Ignition and Tune-Up Products for the 1948 Pontiac Torpedo?
Out of 15 Ignition and Tune-Up Products for the 1948 Pontiac Torpedo, the most popular in our inventory are:
from
$2.49
(2)
Copper Plus Small Engine Spark Plug Dependable Performance, OE Replacement RJ12C
Spark Plugs
What are the top-rated 1948 Pontiac Torpedo Ignition and Tune-Up Products?
Top-rated Ignition and Tune-Up Products for your 1948 Pontiac Torpedo based on customer reviews/ratings are:
from
$1.99
(3)
Copper Spark Plug: Delivers Quick Starts, Good Fuel Economy, Smooth Acceleration
“AutoLite spark plug was fine, as I expected. Service received from Advance Auto was terrible.”
from
$153.99
(2)
Mallory Prosidewinder 135F Univ/Wire Set
“Very high quality product for my show car. My car is a 1940 Ford Tudor Deluxe with a 1942 style ‘crab’ distributor. It still has the original engine t”
from
$133.99
(1)
Mallory Prosidewinder 90F Univ. Wire Set
“Good quality wires with low impedence. The Advance listing says to get part 669 if you have male terminal distributor cap. This is not needed – the ”
