1948 Chrysler Royal Series Belts and Hoses
Find Your Specific 1948 Chrysler Royal Series Belts and Hoses
Below you will find various in-demand Chrysler Belts and Hoses, components and accessories for your 1948 Royal Series. Advance Auto Parts has popular Royal Series parts like Serpentine and V Belts, Engine Cooling Hoses, Oil Cooler Hoses and more. You’ll also find aftermarket and OEM Belts and Hoses for other Royal Series model years including
1946,
1947,
1949 and more. Select a category of 1948 Chrysler Royal Series Belts and Hoses below and start saving instantly.
Popular 1948 Chrysler Royal Series Belts and Hoses Categories
Essential Belts and Hoses for 1948 Chrysler Royal Series
Gates – Green Stripe Heavy-Duty Vulco-Flex Coolant Hose (Part No.26603)
from
$22.49
Heavy-duty flexible hose designed to replace straight or curved coolant hoses. The benefit is maximum coverage with minimum inventory. Hose inside diameter remains constant from end to end. No convolutions inside hose so tube is smooth, allowing free coolant flow. Approved for marine applications.
Product Features:
See More
Product Features:
- Designed to resist electrochemical degradation, the leading cause of pipe failure
- The steel wire spiral allows them to take on multiple shapes without bending or crushing
- EPDM tubing and neoprene lid for extended life
- Polyester fabric reinforcement vulcanizes without unnecessary deformation in connections
- Heat, oil and ozone resistant
- Performs to SAE 20R5 Type EC Class D-2 specifications
- Temperature range -40 degrees F to +257 degrees F (-40 degrees C to +125 degrees C)
- Warning: Do not use for fuel or oil transfer applications
- Caution: Do not use for fuel or oil transfer applications.
Dayco – Flex Radiator Hoses; EPDM Rubber, 17.25 Inch Long, 1.5 Inch Inner Dia. (Part No.81171)
from
$27.99
The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent splitting, ballooning and elongation as well as resist ozone and other detrimental environmental elements, coolants and temperature variations of -40øF (-40øC) to +257øF (+125øC). With corrugations that provide excellent hose flexibility without flattening or collapsing, the Dayco flex radiator hose also features a helical steel coil spring for increased flexibility.
Product Features:
See More
Product Features:
- Designed to meet OE specifications
- Not suitable for oil or heat transfer
- Meets SAE J20R4, Class D-2 requirements for improved service hoses
- This hose is designed to prevent splitting, ballooning, and elongation
Imperial – Metal Line Kit for Engine Oil Coolers (Part No.240293)
from
$59.99
Metal line kit for engine oil coolers. Routes oil lines past exhaust manifolds.
Product Features:
See More
Product Features:
- Metal line kit
- For use in engine oil cooler applications
- Routes oil lines past exhaust manifolds
- Provides protection where standard hoses can fail
Imperial – 1/2" x 12′ Engine Oil Cooler Hose (Part No.240112)
from
$48.99
1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.
Product Features:
See More
Product Features:
- Engine oil cooler hose
- Size: 1/2″ x 12′
- Designed for engine oil applications
- 12′ hose length accommodates most applications
Gates – Vulco Straight Coolant Hose (Sold by foot) (Part No.24028)
from
$1.99
Specially engineered stick hose is ideal for straight coolant/air connections in automotive, stationary engine, industrial and home applications.
Product Features:
See More
Product Features:
- Heat-resistant lid
- Cover marked in 1 in. increments to facilitate approximate cut lengths, allows “custom fit” installations
- Meets SAE 20R1 requirements for Class D-2 walls
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: For a maintenance free connection, use PowerGrip SB clamps
- Warning: Do not use for fuel or oil transfer applications
Gates – Straight Heater Hose: EPDM, Direct Fit, 0.625" Inside Diameter (sold by foot) (Part No.28411)
from
$1.99
Premium hose constructed for long service life.
Product Features:
See More
Product Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- CAUTION: Do not use for fuel or oil transfer applications
- PLEASE NOTE: Item is priced and sold by the foot. See store for details.
Gates – Green Stripe Truck & Bus Series V-Belt (Part No.TR24489)
from
$39.99
Specifically designed for heavy-duty truck, bus and off-road equipment applications. Absorbs normal shock loads without damage to the belt.
Product Features:
See More
Product Features:
- Molded notches reduce bending stresses, especially on small-diameter pulleys, while dissipating heat.
- High modulus, high strength tensile cord
- Oil and heat resistant construction
- Meets SAE J636b and SAE J637 specifications
- Meets RMA standards for oil and heat resistance and static conductivity requirements
- NOTE: Some sizes are available as Gates PowerBand V-Belts
Gates – Vulco-Flex II Flexible Coolant Hose (Part No.25478)
from
$18.79
Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.
Product Features:
See More
Product Features:
- Improved sealing surface for improved leak resistance
- High flexibility for easy installation
- Maximum vehicle coverage with minimal inventory
- Resistant to heat, oil and ozone
- Rated for SAE 20R5 Class D-2 performance
- Temperature range: up to +257 degrees Celsius. F (+125 Deg. C)
- Note: Gates recommends replacing clamps and connectors each time a new radiator hose is installed.
- Caution: Do not use for fuel or oil transfer applications
Gates – Safety Stripe Standard Straight Heater Hose (Sold by foot) (Part No.28413)
from
$4.99
Premium hose constructed for long service life.
Product Features:
See More
Product Features:
- Good resistance to high temperatures for extended periods of time, which extends the service life.
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transportation applications.
- CAUTION: Do not use for fuel or oil transfer applications
- PLEASE NOTE: Item is priced and sold by the foot. See store for details.
Dayco – Flex Radiator Hoses; EPDM Rubber, 6.13 Inch Long, 1.75 Inch Inner Dia. (Part No.81281)
from
$9.99
The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent splitting, ballooning and elongation as well as resist ozone and other detrimental environmental elements, coolants and temperature variations of -40øF (-40øC) to +257øF (+125øC). With corrugations that provide excellent hose flexibility without flattening or collapsing, the Dayco flex radiator hose also features a helical steel coil spring for increased flexibility.
Product Features:
See More
Product Features:
- Designed to meet OE specifications
- Not suitable for oil or heat transfer
- Meets SAE J20R4, Class D-2 requirements for improved service hoses
- This hose is designed to prevent splitting, ballooning, and elongation
Gates – Vulco-Flex II Flexible Coolant Hose (Part No.25477)
from
$17.79
Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.
Product Features:
See More
Product Features:
- Improved sealing surface for improved leak resistance
- Their great flexibility makes installation easy
- Maximum vehicle coverage with minimal inventory
- Resistant to heat, oil and ozone
- Rated for SAE 20R5 Class D-2 performance
- Temperature range: up to +257 degrees Celsius. F (+125 Deg. C)
- Note: Gates recommends replacing clamps and connectors each time a new radiator hose is installed.
- Warning: Do not use for fuel or oil transfer applications
Upgrade your 1948 Chrysler Royal Series with Top-Quality Belts and Hoses
When it comes to maintaining or upgrading your 1948 Chrysler Royal Series, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chrysler or enhancing its overall performance, Belts and Hoses are key to keeping your Royal Series functioning at its best. At Advance Auto Parts, we offer a wide selection of 9 Belts and Hoses for the 1948 Chrysler Royal Series, designed to meet your needs without breaking the bank.
From
Serpentine and V Belt
replacements to
Engine Cooling Hoses
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 1948 Chrysler Royal Series at great prices.
Our Belts and Hoses inventory for this model
ranges from just $1.99 to $59.99, with
an average price of $23.86.
Our 9 Belts and Hoses in stock come from 3 trusted brands, so you’re sure to find the right part for your 1948 Chrysler Royal Series without overspending.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals
and more to make sure your 1948 Chrysler Royal Series is always ready to roll. We’re committed to providing you with everything you need to keep your Royal Series in top shape, all in one place.
Start shopping confidently below for your 1948 Chrysler Royal Series!
Best-Selling Serpentine and V Belts for 1948 Chrysler Royal Series
Enhance the driving experience in your Chrysler with 1 quality Serpentine and V Belt components, starting at $39.99.
Gates – Green Stripe Truck & Bus Series V-Belt (Part No.TR24489)
from
$39.99
Specifically designed for heavy-duty truck, bus and off-road equipment applications. Absorbs normal shock loads without damage to the belt.
Product Features:
See More
Product Features:
- Molded notches reduce bending stresses, especially on small-diameter pulleys, while dissipating heat.
- High modulus, high strength tensile cord
- Oil and heat resistant construction
- Meets SAE J636b and SAE J637 specifications
- Meets RMA standards for oil and heat resistance and static conductivity requirements
- NOTE: Some sizes are available as Gates PowerBand V-Belts
Most Popular 1948 Chrysler Royal Series Engine Cooling Hoses
Customize your Chrysler with 3 Engine Cooling Hoses products
like Upper Radiator Hoses and
Lower Radiator Hoses, all
priced under $18.79.
Dayco – Flex Radiator Hoses; EPDM Rubber, 6.13 Inch Long, 1.75 Inch Inner Dia. (Part No.81281)
from
$9.99
The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent splitting, ballooning and elongation as well as resist ozone and other detrimental environmental elements, coolants and temperature variations of -40øF (-40øC) to +257øF (+125øC). With corrugations that provide excellent hose flexibility without flattening or collapsing, the Dayco flex radiator hose also features a helical steel coil spring for increased flexibility.
Product Features:
See More
Product Features:
- Designed to meet OE specifications
- Not suitable for oil or heat transfer
- Meets SAE J20R4, Class D-2 requirements for improved service hoses
- This hose is designed to prevent splitting, ballooning, and elongation
Gates – Vulco-Flex II Flexible Coolant Hose (Part No.25478)
from
$18.79
Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.
Product Features:
See More
Product Features:
- Improved sealing surface for improved leak resistance
- High flexibility for easy installation
- Maximum vehicle coverage with minimal inventory
- Resistant to heat, oil and ozone
- Rated for SAE 20R5 Class D-2 performance
- Temperature range: up to +257 degrees Celsius. F (+125 Deg. C)
- Note: Gates recommends replacing clamps and connectors each time a new radiator hose is installed.
- Caution: Do not use for fuel or oil transfer applications
Gates – Safety Stripe Standard Straight Heater Hose (Sold by foot) (Part No.28413)
from
$4.99
Premium hose constructed for long service life.
Product Features:
See More
Product Features:
- Good resistance to high temperatures for extended periods of time, which extends the service life.
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transportation applications.
- CAUTION: Do not use for fuel or oil transfer applications
- PLEASE NOTE: Item is priced and sold by the foot. See store for details.
Top Picks for 1948 Chrysler Royal Series Oil Cooler Hoses
Upgrade Chrysler Royal Series with top-quality Oil Cooler Hoses parts, including 2 OEM and aftermarket selections for your 1948 model.
Imperial – 1/2" x 12′ Engine Oil Cooler Hose (Part No.240112)
from
$48.99
1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.
Product Features:
See More
Product Features:
- Engine oil cooler hose
- Size: 1/2″ x 12′
- Designed for engine oil applications
- 12′ hose length accommodates most applications
Imperial – Metal Line Kit for Engine Oil Coolers (Part No.240293)
from
$59.99
Metal line kit for engine oil coolers. Routes oil lines past exhaust manifolds.
Product Features:
See More
Product Features:
- Metal line kit
- For use in engine oil cooler applications
- Routes oil lines past exhaust manifolds
- Provides protection where standard hoses can fail
In-Demand Radiator Hoses for 1948 Chrysler Royal Series
Select from 3 premium Radiator Hoses parts for your 1948 Chrysler Royal Series, with prices ranging from $1.99 to $27.99.
Dayco – Flex Radiator Hoses; EPDM Rubber, 17.25 Inch Long, 1.5 Inch Inner Dia. (Part No.81171)
from
$27.99
The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent splitting, ballooning and elongation as well as resist ozone and other detrimental environmental elements, coolants and temperature variations of -40øF (-40øC) to +257øF (+125øC). With corrugations that provide excellent hose flexibility without flattening or collapsing, the Dayco flex radiator hose also features a helical steel coil spring for increased flexibility.
Product Features:
See More
Product Features:
- Designed to meet OE specifications
- Not suitable for oil or heat transfer
- Meets SAE J20R4, Class D-2 requirements for improved service hoses
- This hose is designed to prevent splitting, ballooning, and elongation
Gates – Straight Heater Hose: EPDM, Direct Fit, 0.625" Inside Diameter (sold by foot) (Part No.28411)
from
$1.99
Premium hose constructed for long service life.
Product Features:
See More
Product Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- CAUTION: Do not use for fuel or oil transfer applications
- PLEASE NOTE: Item is priced and sold by the foot. See store for details.
Gates – Vulco Straight Coolant Hose (Sold by foot) (Part No.24028)
from
$1.99
Specially engineered stick hose is ideal for straight coolant/air connections in automotive, stationary engine, industrial and home applications.
Product Features:
See More
Product Features:
- Heat-resistant lid
- Cover marked in 1 in. increments to facilitate approximate cut lengths, allows “custom fit” installations
- Meets SAE 20R1 requirements for Class D-2 walls
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: For a maintenance free connection, use PowerGrip SB clamps
- Warning: Do not use for fuel or oil transfer applications
FAQs for 1948 Chrysler Royal Series Belts and Hoses
Which Belts and Hoses are best-sellers for 1948 Chrysler Royal Series?
Out of 9 Belts and Hoses that fit 1948 Chrysler Royal Series, the following parts are the top sellers:
- 1/2" x 12′ Engine Oil Cooler Hose (19230057) – $48.99
- Metal Line Kit for Engine Oil Coolers (19230068) – $59.99
- Flex Radiator Hoses; EPDM Rubber, 6.13 Inch Long, 1.75 Inch Inner Dia. (10843887) – $9.99
What’s the price range for 1948 Chrysler Royal Series Belts and Hoses?
Belts and Hose prices for the 1948 Chrysler Royal Series start at $1.99 and go up to $59.99 for the most premium parts.
What’s the average price of a Belts and Hose for a 1948 Chrysler Royal Series?
The average price for Belts and Hoses for the 1948 Chrysler Royal Series is $23.86. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Belts and Hoses for other Chrysler Royal Series model years?
What are the cheapest Belts and Hoses for my 1948 Chrysler Royal Series?
The cheapest 1948 Chrysler Royal Series Belts and Hoses we carry in stock are:
- Straight Heater Hose: EPDM, Direct Fit, 0.625" Inside Diameter (sold by foot) (10505038) – $1.99
- Vulco Straight Coolant Hose (Sold by foot) (10520979) – $1.99
- Safety Stripe Standard Straight Heater Hose (Sold by foot) (10504728) – $4.99
- Flex Radiator Hoses; EPDM Rubber, 6.13 Inch Long, 1.75 Inch Inner Dia. (10843887) – $9.99
- Vulco-Flex II Flexible Coolant Hose (10504689) – $18.79
What are the top-rated Belts and Hoses that fit the 1948 Chrysler Royal Series?
Out of 1 reviews by customers, our 1948 Chrysler Royal Series Belts and Hoses have an average customer rating of . These are some of the highest-rated Belts and Hose types for the 1948 Chrysler Royal Series and their top-rated products:
- Radiator Hoses
- Flex Radiator Hoses; EPDM Rubber, 17.25 Inch Long, 1.5 Inch Inner Dia. (5191084) – $27.99
What types of Belts and Hoses do you sell for my 1948 Chrysler Royal Series?
As of 11/2/25, these are some of the most in-demand types of Belts and Hoses for a 1948 Chrysler Royal Series:
Can I get help with 1948 Chrysler Royal Series Belts and Hose orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chrysler Belts and Hoses and more.
What is your return policy for Chrysler Royal Series Belts and Hoses?
Advance Auto Parts keeps returns simple. For new Chrysler Royal Series Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
