1946 Studebaker M16 Belts and Hoses
Find Your Specific 1946 Studebaker M16 Belts and Hoses
Below you will find various in-demand Studebaker Belts and Hoses, components and accessories for your 1946 M16. Advance Auto Parts has popular M16 parts like Engine Cooling Hoses, Serpentine and V Belts, Radiator Hoses and more. You’ll also find aftermarket and OEM Belts and Hoses for other M16 model years including
1942,
1943,
1944,
1945,
1947,
1948 and more. Select a category of 1946 Studebaker M16 Belts and Hoses below and start saving instantly.
Popular 1946 Studebaker M16 Belts and Hoses Categories
Essential Belts and Hoses for 1946 Studebaker M16s
Gates – Green Stripe« Truck & Bus Series V-Belt (Part No.TR22373)
from
$30.99
Specifically designed for heavy-duty truck, bus and off-road equipment applications. Absorbs normal shock loads without damage to the belt.
Product Features:
See More
Product Features:
- Molded notches reduce bending stress, especially on small diameter pulleys, while dissipating heat
- High modulus, high strength tensile cord
- Oil and heat-resistant construction throughout
- Meets SAE J636b and SAE J637 specifications
- Meets RMA oil and heat resistant standards and static conductivity requirements
- NOTE: Some sizes available as Gates PowerBand joined V-belts
Gates – Vulco-Flex« II Flexible Coolant Hose (Part No.25252)
from
$21.79
Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.
Product Features:
See More
Product Features:
- Improved sealing surface for greater leak resistance
- High flexibility for easy installation
- Maximum vehicle coverage with minimum inventory
- Resistant to heat, oil and ozone
- Rated for SAE 20R5 Class D-2 performance
- Temperature Range: up to +257 Deg. F (+125 Deg. C)
- Note: Gates recommends replacing clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Gates – Molded Heater Hose: EPDM, Steel, Direct Fit, 2" Inside Diameter (Part No.26509)
from
$37.99
Product Features:
See More
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Built-in steel spiral wire allows for medium sized curves without kinking or collapsing
- EPDM tube and Neoprene cover for extended service life
- Polyester fabric-ply reinforcement vulcanizes into shape without unnecessary strain on connections
- Resistant to heat, oil and ozone
- Performs to SAE 20R5 Type EC Class D-2 specifications
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- Caution: Do not use for fuel or oil transfer applications.
Upgrade your 1946 Studebaker M16 with Top-Quality Belts and Hoses
When it comes to maintaining or upgrading your 1946 Studebaker M16, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Studebaker or enhancing its overall performance, Belts and Hoses are key to keeping your M16 functioning at its best. At Advance Auto Parts, we offer a wide selection of 3 Belts and Hoses for the 1946 Studebaker M16, designed to meet your needs without breaking the bank.
From
Engine Cooling Hose
replacements to
Serpentine and V Belts
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 1946 Studebaker M16 at great prices.
Our Belts and Hoses inventory for this model
ranges from just $21.79 to $37.99, with
an average price of $30.26.
Our 3 Belts and Hoses in stock come from trusted brands, so you’re sure to find the right part for your 1946 Studebaker M16 without overspending.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Fluids and Chemicals, Alternators and Starters
and more to make sure your 1946 Studebaker M16 is always ready to roll. We’re committed to providing you with everything you need to keep your M16 in top shape, all in one place.
Start shopping confidently below for your 1946 Studebaker M16!
Best-Selling Engine Cooling Hoses for 1946 Studebaker M16s
Enhance the driving experience in your Studebaker with 1 quality Engine Cooling Hose components, starting at $21.79.
Gates – Vulco-Flex« II Flexible Coolant Hose (Part No.25252)
from
$21.79
Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.
Product Features:
See More
Product Features:
- Improved sealing surface for greater leak resistance
- High flexibility for easy installation
- Maximum vehicle coverage with minimum inventory
- Resistant to heat, oil and ozone
- Rated for SAE 20R5 Class D-2 performance
- Temperature Range: up to +257 Deg. F (+125 Deg. C)
- Note: Gates recommends replacing clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Most Popular 1946 Studebaker M16 Serpentine and V Belts
Customize your Studebaker with 1 Serpentine and V Belts products
like V-Belts, all
priced under $30.99.
Gates – Green Stripe« Truck & Bus Series V-Belt (Part No.TR22373)
from
$30.99
Specifically designed for heavy-duty truck, bus and off-road equipment applications. Absorbs normal shock loads without damage to the belt.
Product Features:
See More
Product Features:
- Molded notches reduce bending stress, especially on small diameter pulleys, while dissipating heat
- High modulus, high strength tensile cord
- Oil and heat-resistant construction throughout
- Meets SAE J636b and SAE J637 specifications
- Meets RMA oil and heat resistant standards and static conductivity requirements
- NOTE: Some sizes available as Gates PowerBand joined V-belts
Top Picks for 1946 Studebaker M16 Radiator Hoses
Upgrade Studebaker M16s with top-quality Radiator Hoses parts, including 1 OEM and aftermarket selections for your 1946 model.
Gates – Molded Heater Hose: EPDM, Steel, Direct Fit, 2" Inside Diameter (Part No.26509)
from
$37.99
Product Features:
See More
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Built-in steel spiral wire allows for medium sized curves without kinking or collapsing
- EPDM tube and Neoprene cover for extended service life
- Polyester fabric-ply reinforcement vulcanizes into shape without unnecessary strain on connections
- Resistant to heat, oil and ozone
- Performs to SAE 20R5 Type EC Class D-2 specifications
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- Caution: Do not use for fuel or oil transfer applications.
FAQs for 1946 Studebaker M16 Belts and Hoses
Which Belts and Hoses are best-sellers for 1946 Studebaker M16s?
Out of 3 Belts and Hoses that fit 1946 Studebaker M16s, the following parts are the top sellers:
- Molded Heater Hose: EPDM, Steel, Direct Fit, 2" Inside Diameter (10911261) – $37.99
- Green Stripe« Truck & Bus Series V-Belt (10914422) – $30.99
- Vulco-Flex« II Flexible Coolant Hose (10504620) – $21.79
What’s the price range for 1946 Studebaker M16 Belts and Hoses?
Belts and Hose prices for the 1946 Studebaker M16 start at $21.79 and go up to $37.99 for the most premium parts.
What’s the average price of a Belts and Hose for a 1946 Studebaker M16?
The average price for Belts and Hoses for the 1946 Studebaker M16 is $30.26. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Belts and Hoses for other Studebaker M16 model years?
What are the cheapest Belts and Hoses for my 1946 Studebaker M16?
The cheapest 1946 Studebaker M16 Belts and Hoses we carry in stock are:
- Vulco-Flex« II Flexible Coolant Hose (10504620) – $21.79
- Green Stripe« Truck & Bus Series V-Belt (10914422) – $30.99
- Molded Heater Hose: EPDM, Steel, Direct Fit, 2" Inside Diameter (10911261) – $37.99
What types of Belts and Hoses do you sell for my 1946 Studebaker M16?
As of 2/5/25, these are some of the most in-demand types of Belts and Hoses for a 1946 Studebaker M16:
Can I get help with 1946 Studebaker M16 Belts and Hose orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Studebaker Belts and Hoses and more.
What is your return policy for Studebaker M16 Belts and Hoses?
Advance Auto Parts keeps returns simple. For new Studebaker M16 Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
