1944 Studebaker M16 Belts and Hoses
Find Your Specific 1944 Studebaker M16 Belts and Hoses
Below you will find various in-demand Studebaker Belts and Hoses, components and accessories for your 1944 M16. Advance Auto Parts has popular M16 parts like Serpentine and V Belts Engine Cooling Hoses and more. You’ll also find aftermarket and OEM Belts and Hoses for other M16 model years including
1942,
1943,
1945,
1946,
1947,
1948 and more. Select a category of 1944 Studebaker M16 Belts and Hoses below and start saving instantly.
Popular 1944 Studebaker M16 Belts and Hoses Categories
Essential Belts and Hoses for 1944 Studebaker M16s
Gates – Vulco-Flex II Flexible Coolant Hose (Part No.25252)
from
$21.79
Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.
Product Features:
See More
Product Features:
- Improved sealing surface for greater leak resistance
- Their high flexibility makes installation easier
- Maximum vehicle coverage with minimal inventory
- Resistant to heat, oil and ozone
- Rated for SAE 20R5 Class D-2 performance
- Temperature range: up to +257 degrees Celsius. F (+125 Deg. C)
- Note: Gates recommends replacing the clamps and connectors each time a new radiator hose is installed.
- Caution: Do not use for fuel or oil transport applications.
Gates – Green Stripe Heavy-Duty Vulco-Flex Coolant Hose (Part No.26509)
from
$42.99
Heavy-duty flexible hose designed to replace straight or curved coolant hoses. The benefit is maximum coverage with minimum inventory. Hose inside diameter remains constant from end to end. No convolutions inside hose so tube is smooth, allowing free coolant flow. Approved for marine applications.
Product Features:
See More
Product Features:
- Designed to resist electrochemical degradation, the main cause of pipe failure
- Built-in steel spiral wire allows for medium sized curves without kinking or collapsing
- EPDM tube and Neoprene cover for extended service life
- Polyester fabric-ply reinforcement vulcanizes into shape without unnecessary strain on connections
- Heat, oil and ozone resistant
- Performs to SAE 20R5 Type EC Class D-2 specifications
- Temperature range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- Caution: Do not use for fuel or oil transfer applications.
Gates – Green Stripe Truck & Bus Series V-Belt (Part No.TR22373)
from
$34.99
Specifically designed for heavy-duty truck, bus and off-road equipment applications. Absorbs normal shock loads without damage to the belt.
Product Features:
See More
Product Features:
- Molded notches reduce bending stresses, especially on small diameter pulleys, while also dissipating heat.
- High modulus and high strength traction cord
- Oil and heat resistant construction
- Meets SAE J636b and SAE J637 specifications
- It meets RMA standards for oil and heat resistance and static conductivity requirements
- NOTE: Some sizes are available as Gates PowerBand V-belts.
Gates – Green Stripe Truck & Bus Series V-Belt (Part No.TR24461)
from
$55.99
Specifically designed for heavy-duty truck, bus and off-road equipment applications. Absorbs normal shock loads without damage to the belt.
Product Features:
See More
Product Features:
- Molded notches reduce bending stresses, especially on small diameter pulleys, while also dissipating heat.
- High modulus, high strength tensile cord
- Oil and heat resistant construction
- Compliant with SAE J636b and SAE J637 specifications
- Meets RMA oil and heat resistant standards and static conductivity requirements
- NOTE: Some sizes available as Gates PowerBand V-belts
Upgrade your 1944 Studebaker M16 with Top-Quality Belts and Hoses
When it comes to maintaining or upgrading your 1944 Studebaker M16, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Studebaker or enhancing its overall performance, Belts and Hoses are key to keeping your M16 functioning at its best. At Advance Auto Parts, we offer a wide selection of 4 Belts and Hoses for the 1944 Studebaker M16, designed to meet your needs without breaking the bank.
From
Serpentine and V Belt
replacements to
Engine Cooling Hoses
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 1944 Studebaker M16 at great prices.
Our Belts and Hoses inventory for this model
ranges from just $21.79 to $55.99, with
an average price of $38.94.
Our 4 Belts and Hoses in stock come from trusted brands, so you’re sure to find the right part for your 1944 Studebaker M16 without overspending.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Fluids and Chemicals, Brake Parts
and more to make sure your 1944 Studebaker M16 is always ready to roll. We’re committed to providing you with everything you need to keep your M16 in top shape, all in one place.
Start shopping confidently below for your 1944 Studebaker M16!
Best-Selling Serpentine and V Belts for 1944 Studebaker M16s
Enhance the driving experience in your Studebaker with 2 quality Serpentine and V Belt components, starting at $34.99.
Gates – Green Stripe Truck & Bus Series V-Belt (Part No.TR22373)
from
$34.99
Specifically designed for heavy-duty truck, bus and off-road equipment applications. Absorbs normal shock loads without damage to the belt.
Product Features:
See More
Product Features:
- Molded notches reduce bending stresses, especially on small diameter pulleys, while also dissipating heat.
- High modulus and high strength traction cord
- Oil and heat resistant construction
- Meets SAE J636b and SAE J637 specifications
- It meets RMA standards for oil and heat resistance and static conductivity requirements
- NOTE: Some sizes are available as Gates PowerBand V-belts.
Gates – Green Stripe Truck & Bus Series V-Belt (Part No.TR24461)
from
$55.99
Specifically designed for heavy-duty truck, bus and off-road equipment applications. Absorbs normal shock loads without damage to the belt.
Product Features:
See More
Product Features:
- Molded notches reduce bending stresses, especially on small diameter pulleys, while also dissipating heat.
- High modulus, high strength tensile cord
- Oil and heat resistant construction
- Compliant with SAE J636b and SAE J637 specifications
- Meets RMA oil and heat resistant standards and static conductivity requirements
- NOTE: Some sizes available as Gates PowerBand V-belts
Most Popular 1944 Studebaker M16 Engine Cooling Hoses
Customize your Studebaker with 2 Engine Cooling Hoses products
like Upper Radiator Hoses, all
priced under $42.99.
Gates – Green Stripe Heavy-Duty Vulco-Flex Coolant Hose (Part No.26509)
from
$42.99
Heavy-duty flexible hose designed to replace straight or curved coolant hoses. The benefit is maximum coverage with minimum inventory. Hose inside diameter remains constant from end to end. No convolutions inside hose so tube is smooth, allowing free coolant flow. Approved for marine applications.
Product Features:
See More
Product Features:
- Designed to resist electrochemical degradation, the main cause of pipe failure
- Built-in steel spiral wire allows for medium sized curves without kinking or collapsing
- EPDM tube and Neoprene cover for extended service life
- Polyester fabric-ply reinforcement vulcanizes into shape without unnecessary strain on connections
- Heat, oil and ozone resistant
- Performs to SAE 20R5 Type EC Class D-2 specifications
- Temperature range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- Caution: Do not use for fuel or oil transfer applications.
Gates – Vulco-Flex II Flexible Coolant Hose (Part No.25252)
from
$21.79
Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.
Product Features:
See More
Product Features:
- Improved sealing surface for greater leak resistance
- Their high flexibility makes installation easier
- Maximum vehicle coverage with minimal inventory
- Resistant to heat, oil and ozone
- Rated for SAE 20R5 Class D-2 performance
- Temperature range: up to +257 degrees Celsius. F (+125 Deg. C)
- Note: Gates recommends replacing the clamps and connectors each time a new radiator hose is installed.
- Caution: Do not use for fuel or oil transport applications.
FAQs for 1944 Studebaker M16 Belts and Hoses
Which Belts and Hoses are best-sellers for 1944 Studebaker M16s?
Out of 4 Belts and Hoses that fit 1944 Studebaker M16s, the following parts are the top sellers:
- Green Stripe Heavy-Duty Vulco-Flex Coolant Hose (10911261) – $42.99
- Green Stripe Truck & Bus Series V-Belt (10914422) – $34.99
- Vulco-Flex II Flexible Coolant Hose (10504620) – $21.79
What’s the price range for 1944 Studebaker M16 Belts and Hoses?
Belts and Hose prices for the 1944 Studebaker M16 start at $21.79 and go up to $55.99 for the most premium parts.
What’s the average price of a Belts and Hose for a 1944 Studebaker M16?
The average price for Belts and Hoses for the 1944 Studebaker M16 is $38.94. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Belts and Hoses for other Studebaker M16 model years?
What are the cheapest Belts and Hoses for my 1944 Studebaker M16?
The cheapest 1944 Studebaker M16 Belts and Hoses we carry in stock are:
- Vulco-Flex II Flexible Coolant Hose (10504620) – $21.79
- Green Stripe Truck & Bus Series V-Belt (10914422) – $34.99
- Green Stripe Heavy-Duty Vulco-Flex Coolant Hose (10911261) – $42.99
- Green Stripe Truck & Bus Series V-Belt (10914076) – $55.99
What types of Belts and Hoses do you sell for my 1944 Studebaker M16?
As of 3/1/26, these are some of the most in-demand types of Belts and Hoses for a 1944 Studebaker M16:
Can I get help with 1944 Studebaker M16 Belts and Hose orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Studebaker Belts and Hoses and more.
What is your return policy for Studebaker M16 Belts and Hoses?
Advance Auto Parts keeps returns simple. For new Studebaker M16 Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
