Fuel Line Viton O-Rings- 5/16" and 3/8"
Hover over the image to zoom in
Share this:

Needa Parts Fuel Line Viton O-Rings- 5/16" and 3/8"

Part No. 800-013 Warranty Details  

Fit of this part varies by vehicle & equipment specs Type of Fit

All Needa Parts Fuel Line Repair Kits Are Made With Original Equipment Quality Fittings And Hose.

Product Features:
  • OE: 217-452
  • Qty: 4
  • All Parts Are Warrantied For 2 Full Years
Back To Top

REVIEW SNAPSHOT®

by PowerReviews
Needa PartsFuel Line Viton O-Rings- 5/16" and 3/8"
 
2.2

(based on 6 reviews)

Ratings Distribution

  • 5 Stars

     

    (1)

  • 4 Stars

     

    (0)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (3)

  • 1 Stars

     

    (2)

17%

of respondents would recommend this to a friend.

Pros

No Pros

Cons

No Cons

Best Uses

No Best Uses
    • Reviewer Profile:
    • Avid do-it-yourselfer (5)

Reviewed by 6 customers

Displaying reviews 1-6

Back to top

 
2.0

Incorrect for fuel rail

By 

from Albany, NY

About Me Casual Do-It-Yourselfer

Pros

  • Durable
  • Easy To Use
  • Good Design
  • Quality Materials

Cons

    Best Uses

      Comments about Needa Parts Fuel Line Viton O-Rings- 5/16" and 3/8":

      I needed orings for my fuel rail supply & return lines. I needed 5/16"ID and 3/8"ID, and this product didn't specify if the 5/16 and 3/8 were inner or outer. It's neither. When I got the package, this is what it says on it:

      5/16" O-Rings: 1/4" ID, 3/8" OD
      3/8" O-Rings: 5/16" ID, 7/16" OD

      Comment on this reviewHelp Icon

       
      1.0

      Wrong Size

      By 

      from Longwood, FL

      About Me Avid Do-It-Yourselfer

      Pros

        Cons

        • Difficult To Use
        • Not Even Close In Size
        • Poor Design
        • To The Quick Connects

        Best Uses

        • Excuse To Return To Store

        Comments about Needa Parts Fuel Line Viton O-Rings- 5/16" and 3/8":

        Sold as fuel line o-rings for 96 Impala SS. Might fit the in-line fuel filter (maybe, didn't get that far) but does not fit the sending unit or fuel rail.

        Comment on this reviewHelp Icon

         
        2.0

        If only they fit

        By 

        from Neverland

        About Me Avid Do-It-Yourselfer

        Comments about Needa Parts Fuel Line Viton O-Rings- 5/16" and 3/8":

        O rings where smaller than expected. They seem to float inside the fuel line instead of seating into the groove.

        Comment on this reviewHelp Icon

         
        2.0

        Do not fit quick connects

        By 

        from 8203

        About Me Avid Do-It-Yourselfer

        Pros

        • Durable
        • Easy To Use
        • Quality Materials

        Cons

        • Poor Design

        Best Uses

        • Big Jobs
        • Small Jobs

        Comments about Needa Parts Fuel Line Viton O-Rings- 5/16" and 3/8":

        These rings are for the flared hard-tube ends that connect to the fuel filter for example. They are NOT for the fuel rail or fuel filter quick connect fittings. They are much too small for the quick connect fittings.

        Comment on this reviewHelp Icon

        (1 of 1 customers found this review helpful)

         
        1.0

        Fuel line o rings

        By 

        from Harvey, La

        About Me Avid Do-It-Yourselfer

        Comments about Needa Parts Fuel Line Viton O-Rings- 5/16" and 3/8":

        o rings do not fit lines at fuel pump, gas tank.

        Comment on this reviewHelp Icon

        (2 of 6 customers found this review helpful)

         
        5.0

        Worked well

        By 

        from Lancaster, PA

        About Me Avid Do-It-Yourselfer

        Verified Buyer

        Pros

          Cons

            Best Uses

            • Outside
            • Small Jobs

            Comments about Needa Parts Fuel Line Viton O-Rings- 5/16" and 3/8":

            Worked well

            Comment on this reviewHelp Icon

            Displaying reviews 1-6

            Back to top

            Do you have questions about this product?

             

            Ask a question, get answers from real customers and in-house experts. For further assistance, please review your support options on our Contact Us page.

            6 Questions | 6 Answers
            Displaying questions 1-6
            • Q:

              Will this fit the fuel feed line to lower manifold for my 1993 chevy corsica 2.2?
              Asked on 3/6/2015 by B

              1 answer

              • CUSTOMER CARE

                A:

                Hi B, this part is universal and not vehicle specific. I will replace the defective O-ring in a 5/16" and 3/8" quick connect fitting. The exact fuel oline O-ring for your 1993 Chevrolet Corsica 2.2L is currently unavailable online.

                Answered on 3/7/2015 by Steve from AAP
            • Q:

              i removed my fuel lines at the fuel rail on a 94 4.0 are these the rings i need and how easy are they to install?
              Asked on 4/21/2013 by j

              1 answer

              • CUSTOMER CARE

                A:

                This Dorman - OE Solutions Fuel Line Viton O-Rings - 2 Each - 5/16 Inch and 3/8 Inch - part# 800-013 is not vehicle specific. These Dorman O-ring kits are designed to replace hard, cracked, or leaking OEM O-rings. They are manufactured from thick, durable rubber for maximum sealing power. These O-rings are recommended for replacement every time the fuel fitting is removed. For any further assistance, please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.

                Answered on 4/22/2013 by Vincent from AAP
            • Q:

              Will the 3/8" o-ring replace a leaky o-ring inside a 3/8 steel to nylon quick connect fitting?
              Asked on 9/17/2012 by Subie from Northport

              1 answer

              • CUSTOMER CARE

                A:

                Yes, the Dorman - OE Solutions Fuel Line Viton O-Rings - 2 Each - 5/16 Inch and 3/8 Inch (Part No. 800-013) will replace the defective O-ring in a 3/8" quick connect fitting. For any further assistance please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto store and one of our representatives will gladly assist you with any questions or concerns you may have.

                Answered on 9/18/2012 by John the Car-Doc from AAP
            • Q:

              i have a 04 mazda rx8, i want to know what size o-ring fits the fuel line adapter that connects to the fuel pump or if any of this two o-ring will fit. or can the fuel adapter can be replace?
              Asked on 9/5/2012 by mo from texas

              1 answer

              • CUSTOMER CARE

                A:

                Yes, a 5/16" O-ring is compatible with the fuel line hose in a 2004 Mazda RX-8. This Dorman - OE Solutions Fuel Line Viton O-Rings - 2 Each - 5/16 Inch and 3/8 Inch (Part No. 800-013) is a compatible kit for your vehicle. For any further assistance please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto store and one of our representatives will gladly assist you with any questions or concerns you may have.

                Answered on 9/6/2012 by John the Car-Doc from AAP
            • Q:

              1997 Jeep Wrangler SE. Small leak on the connection along the driver side frame rail just aft of the firewall. Is this the O ring I need? Thanks in advance.
              Asked on 4/7/2012 by Anonymous from North Port, Florida

              1 answer

              • CUSTOMER CARE

                A:

                Yes, this Dorman - OE Solutions Fuel Line Viton O-Rings - 2 Each - 5/16 In. and 3/8 In. with Part No. 800-013 is the fuel line O-ring you mentioned. Inspect the fuel injectors for leaks. Vibration, corrosion and material decomposition can result in failure of O-rings securing the injector to the fuel rails or engine. If the fuel is leaking at the fuel rail connection, the O-ring should be replaced. If the fuel is leaking inside the engine -- which may be evidenced by the Jeep's on-board computer reporting lean or rich fuel to air ratios for a cylinder -- the injector should be replaced. Both O-ring replacement and injector replacement will require removal of the injector.

                Answered on 4/13/2012 by John the Car-Doc from AAP
            • Q:

              Will one of these o-rings fit on the outlet line that connects to my fuel filter?
              Asked on 9/5/2010 by Mark from Georgia

              1 answer

              • CUSTOMER CARE

                A:

                One of them may, but to be competely sure you will need to measure the current o-rings or take them up to one of our stores to compare.

                Answered on 9/5/2010 by Mike from AAP
            Displaying questions 1-6

            Do you have a question about this product? 

            Check out the specials in our monthly flyer.
             
             
            Disclaimer We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact Customer Care if you have any questions or corrections.