Reman Nippondenso 10PA17C Compressor w/ Clutch
Hover over the image to zoom in
Share this:

Driveworks Reman Nippondenso 10PA17C Compressor w/ Clutch

Part No. DW57344 Warranty Details  

See if this part fits a specific vehicle.

Check Vehicle Fit

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Driveworks.

Product Features:
  • All remanufactured compressors are built using the latest compressor technology available today and using strict remanufacturing processes.
  • Tested for noise, vibration, durability, vacuum decay, and pressure decay to ensure no leaks and longer life
  • Contains R-12/R-134a compatible gaskets, o-rings, or seals to properly replace the product
  • Built in a TS16949 certified manufacturing environment to ensure consistent quality that meets or exceeds OE specifications for fit, form, function, and durability
Back To Top
Mounting Type:Tangent
Pulley Groove Quantity:1
Refrigerant Type:R12 or R134a
Belt Type:Single Groove
Belt Width:1/2 in
Clutch Included:Yes
Clutch Pulley Diameter:5-5/8 in
Coil Clock Position:12
Coil Type:12 Volt
Compressor Type:Reman Nippondenso 10PA17C Compressor w/ Clutch
Harness Connector Included:[37228]
Manifold:Pad Mount w/ Gasket
Manifold Type:Pad Mount w/ Gasket
Mount Distance To Groove 1 Midpoint:1.7 in

REVIEW SNAPSHOT®

by PowerReviews
DriveworksReman Nippondenso 10PA17C Compressor w/ Clutch
 
3.8

(based on 4 reviews)

Ratings Distribution

  • 5 Stars

     

    (1)

  • 4 Stars

     

    (1)

  • 3 Stars

     

    (2)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (0)

100%

of respondents would recommend this to a friend.

Pros

  • Easy to install (3)

Cons

No Cons

Best Uses

No Best Uses
    • Reviewer Profile:
    • Auto enthusiast (3)

Reviewed by 4 customers

Displaying reviews 1-4

Back to top

(1 of 1 customers found this review helpful)

 
4.0

Works good, required some modification

By 

from Largo, FL

About Me Auto Enthusiast

See all my reviews

Ask me a question

Verified Buyer
3 or more reviews submitted

Pros

  • Easy To Install

Cons

    Best Uses

    • Replacement

    Comments about Driveworks Reman Nippondenso 10PA17C Compressor w/ Clutch:

    I installed this compressor and it works fine, but I had to cut off the supplied connector and solder on one from the old unit. The unit came with sufficient oil but there was nothing in the documentation about the type or amount. I simply empied the oil, measured it, and put it back in the unit. The unit came with a new top manifold but no high pressure switch so I could not use it. I just re-used the original manifold. I am getting 38 to 40 degree temps and have had it installed for 2 weeks with no problems.

    Comment on this reviewHelp Icon

    (0 of 1 customers found this review helpful)

     
    3.0

    Works fine but requires modification

    By 

    from Largo, FL

    About Me Auto Enthusiast

    See all my reviews

    Ask me a question

    3 or more reviews submitted

    Pros

    • Easy To Install

    Cons

    • No Improvement In Performance

    Best Uses

    • Replacement

    Comments about Driveworks Reman Nippondenso 10PA17C Compressor w/ Clutch:

    Unit came complete with a new top and high/low service valves. It did not have the high pressure switch, so I could not use the new top. The unit was filled with sufficient oil but there was no documentation as to type and how much. I dumped the oil and then replaced it once I was sure there was enough. The electrical plug did not fit my wiring harness so I had to cut the new one off and solder my old one on Black to Black and white to red. Otherwise the unit works great with 38 degrees temps coming out the vents.

    Comment on this reviewHelp Icon

     
    3.0

    Would buy again...

    By 

    from Hartford ct

    About Me Casual Driver

    Verified Buyer

    Pros

    • Durable

    Cons

    • Difficult To Install
    • No instructions pag oil

    Best Uses

    • Everyday Driving

    Comments about Driveworks Reman Nippondenso 10PA17C Compressor w/ Clutch:

    Good product but the ac compressor didn't come with any information regarding how much pag oil to add to the compressor
    A bit disappointed

    Comment on this reviewHelp Icon

     
    5.0

    i would buy this product again

    By 

    from st. louis

    About Me Auto Enthusiast, Mechanic

    Verified Buyer

    Pros

    • Easy To Install

    Cons

      Best Uses

      • Everyday Driving

      Comments about Driveworks Reman Nippondenso 10PA17C Compressor w/ Clutch:

      This was a very easy installation and the product works fine.

      Comment on this reviewHelp Icon

      Displaying reviews 1-4

      Back to top

      Do you have questions about this product?

       

      Ask a question, get answers from real customers and in-house experts. For further assistance, please review your support options on our Contact Us page.

      2 Questions | 2 Answers
      Displaying questions 1-2
      • Q:

        I was told by a professional that I have a hole in my compressor. Do I just need to replace the compressor or would I have to replace the evaporator core, expanision valve, dryer, and evacuate & recharge my a/c in order to get my a/c to work.
        Asked on 7/7/2012 by cb from Alexander City, AL

        1 answer

        • CUSTOMER CARE

          A:

          I would suggest you to replace the compressor with the new one and recharge your A/C in order to avoid intermittent problems. For any further assistance, please visit your nearest Advance Auto store or call us directly at 1-877-ADVANCE (238-2623) and one of our representative there would be more than happy to assist you.

          Answered on 7/9/2012 by Vincent from AAP
      • Q:

        the clutch is bad if I replace the compressor and the drier do I have to replace the condenser. The compressor is still good and has not scattered.
        Asked on 7/27/2010 by JEFF200

        1 answer

        • CUSTOMER CARE

          A:

          If no parts of the compressor or clutch have gone through the system, then you should not have to replace the condenser. One thing you may also want to replace is either the orifice tube or the expansion valve, depending on which one your vehicle is equipped with.

          Answered on 7/27/2010 by Mike from AAP
      Displaying questions 1-2

      Do you have a question about this product? 

      Check out the specials in our monthly flyer.
       
       
      Disclaimer We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact Customer Care if you have any questions or corrections.