Western Star WSH Lower Radiator Hoses
Your Western Star WSH will be happy to know that the search for the right Lower Radiator Hoses you’ve been looking for is over! Advance Auto Parts has 1 different Lower Radiator Hoses for your vehicle, ready for shipping or in-store pick up. The best part is, our Western Star WSH Lower Radiator Hoses start from as little as $32.99.
When it comes to your Western Star WSH, you want parts and products from only trusted brands. Here at Advance Auto Parts, we work with only top reliable Lower Radiator Hoses brands so you can shop with complete confidence. We’re sure you will get the right product to keep that WSH running for a long time.
Shop online, find the best price on the right product, and have it shipped right to your door. If you prefer to shop in person for the right Lower Radiator Hoses for your WSH, visit one of our local Advance Auto Parts locations and you’ll be back on the road in no time!
Compare 12 Western Star Lower Radiator Hoses
Dayco – Straight Radiator Hoses; EPDM Rubber, 1 1/2 Inch Inner Diameter (sold by inch) (Part No.76150)
from
$1.29
The Dayco Straight Radiator Hose is designed for a wide range of light and heavy duty truck applications where the radiator hose routing is relatively straight. Note: This hose is NOT suitable for fuel or oil transfer.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-2 requirements
- Features a high strength knitted reinforcement and synthetic EPDM rubber construction
- Resistant to standard coolants, ozone and other detrimental environmental elements
- PLEASE NOTE: Priced and sold by inch. See store for details.
Dayco – Straight Radiator Hoses; EPDM Rubber, 2 1/4 Inch Inner Diameter (sold by inch) (Part No.76225)
from
$1.79
The Dayco Straight Radiator Hose is designed for a wide range of light and heavy duty truck applications where the radiator hose routing is relatively straight. Note: This hose is NOT suitable for fuel or oil transfer.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-2 requirements
- Features a high strength knitted reinforcement and synthetic EPDM rubber construction
- Resistant to standard coolants, ozone and other detrimental environmental elements
- PLEASE NOTE: Priced and sold by inch. See store for details.
Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 19" Long, 2.50" Diameter (Part No.E70922)
from
$26.49
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-1 requirements
- Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Provides excellent protection against external elements
Gates – Premium Molded Coolant Hose (Part No.21194)
from
$38.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
Product Features:
See More
Product Features:
- Materials specially designed to resist collapse in a vacuum
- Designed to withstand electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube; synthetic fiber knit reinforcement; heat, ozone- and chemical coolant-resistant EPDM cover
- Meets the requirements of SAE 20R4, Class D2 and DIN 73411, Class A (except for tolerances)
- Temperature range -40 degrees F to +257 degrees F (-40 degrees C to +125 degrees C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Gates – Premium Molded Coolant Hose (Part No.21488)
from
$32.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
Product Features:
See More
Product Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-formed for a good fit and to ensure perfectly sealed connections
- EPDM Tube; synthetic fiber knit reinforcement; EPDM cover resistant to heat, ozone and chemical refrigerants
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing clamps and connectors each time a new cooling hose is installed.
- Warning: Do not use for fuel or oil transfer applications
Gates – Molded 90 Degree Silicone Coolant Hose (Part No.28214)
from
$277.99
Newer heavy-duty engines with advanced emissions systems (from 2007 to current model year) produce higher under-hood temperatures, requiring the use of silicone coolant hose. In these new low engine-air-flow and high-heat conditions, Gates Silicone Coolant Hose is the perfect product.
Product Features:
See More
Product Features:
- Premium 4-layer construction
- High heat resistance material meets or exceeds OE specifications
- Multiple layers of first grade silicone material
- Industry-standard blue cover and orange tube for easy identification
- polyester braiding, which is not affected by coolant and heat penetration
- The very thick and flexible tube helps prevent “cold leaks and hardening caused by heat”
- The high-quality silicone lid is resistant to coolants, ozone, weather, sunlight and extreme ambient temperatures.
- Exceeds SAE J20R1, Class A requirements
- Temperature range -65 degrees F to +350 degrees F (-54 degrees C to +177 degrees C)
- Gates also offers application-specific molded silicone coolant hose for exact dimensional specifications
Gates – Molded Heater Hose: EPDM, Direct Fit, 2.5" Inside Diameter (Part No.21135)
from
$55.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
Product Features:
See More
Product Features:
- Materials specially designed to resist collapse in a vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-formed for a good fit and to ensure perfectly sealed connections
- EPDM Tube; synthetic fiber knit reinforcement; EPDM cover resistant to heat, ozone and chemical refrigerants
- Meets the requirements of SAE 20R4, Class D2 and DIN 73411, Class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transportation applications.
Dayco – Straight Radiator Hoses; Silicone, HD, 2 1/2 Inch Inner Dia. (sold by inch) (Part No.78250GL)
from
$6.29
Made with special silicone compounds & reinforced with a ply of braided polyester yarn, the Dayco straight radiator hose H.D. – silicone sustains up to six times longer service life than an ordinary coolant hose when installed with a Dayco lined hose clamp. It has a temperature rating of -40 Deg. F (-40 Deg. C) to +350 Deg. F (+175 Deg. C) and is designed for a range of H.D. trucking applications where routing is relatively straight.
Product Features:
See More
Product Features:
- Capable of withstanding extreme temperatures and high-pressure environments
- Meets stringent OE specifications
- Designed to meet SAE requirements J20R1, Class B Tube, Class C Cover, standard wall construction
- PLEASE NOTE: Item is sold and priced by the inch. See store for details.
Dayco – Straight Coolant Hose (Heavy-Duty 2-Ply) (sold by each) (Part No.77238GL)
from
$2.49
Designed for a wide range of light and heavy duty truck applications where the radiator hose routing is relatively straight, Dayco Heavy Duty Straight Radiator Hose is made with the highest quality woven mesh fabric reinforcement, neoprene cover, and nitrile tube compounds to withstand the most corrosive elements in diesel engines: oil, coolants, coolant additives, and temperature ranges of -40 Degree F (-40 Degree C) to +212 Degree F (+100 Degree C). This hose meets SAE requirements J20R1, Class B Tube, Class C Cover, standard wall construction. Note: This hose is NOT suitable for fuel or oil transfer.
Product Features:
See More
Product Features:
- Meets SAE requirements J20R1, Class B Tube, Class C Cover, standard wall construction
- Made with the highest quality woven mesh fabric reinforcement, neoprene cover, and nitrile tube compounds
- Withstands the most corrosive elements in diesel engines: oil, coolants, and coolant additives
- Performs well in temperature ranges of -40 Degree F (-40 Degree C) to +212 Degree F (+100 Degree C)
Dayco – Straight Radiator Hoses; EPDM Rubber, 2 3/4 Inch Inner Diameter (sold by inch) (Part No.76275)
from
$2.49
The Dayco Straight Radiator Hose is designed for a wide range of light and heavy duty truck applications where the radiator hose routing is relatively straight. Note: This hose is NOT suitable for fuel or oil transfer.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-2 requirements
- Features a high strength knitted reinforcement and synthetic EPDM rubber construction
- Resistant to standard coolants, ozone and other detrimental environmental elements
- PLEASE NOTE: Priced and sold by inch. See store for details.
Dayco – Straight Radiator Hoses; EPDM Rubber, HD, 2 1/2 Inch Inner Dia. (sold by inch) (Part No.77250GL)
from
$2.49
Designed for a wide range of heavy-duty truck applications where the routing is relatively straight, the Dayco straight radiator hose – H.D. is made with the highest quality woven mesh fabric reinforcement, neoprene cover and nitrile tube compounds to withstand the most corrosive elements in diesel engines. Providing protection from oil, coolants, coolant additives and heat, it has a temperature rating of -40?F (-40?C) to +212?F (+100?C).
Product Features:
See More
Product Features:
- Capable of withstanding extreme temperatures and high-pressure environments
- Designed to meet SAE requirements J20R1, Class B Tube, Class C Cover, standard wall construction
- Not suitable for fuel or oil transfer
- PLEASE NOTE: Priced and sold by inch. See store for details.
Dayco – Straight Coolant Hose, Heavy-Duty 2-Ply, 2" (sold by inch) (Part No.77200GL)
from
$1.99
Designed for a wide range of light and heavy duty truck applications where the radiator hose routing is relatively straight, Dayco Heavy Duty Straight Radiator Hose is made with the highest quality woven mesh fabric reinforcement, neoprene cover, and nitrile tube compounds to withstand the most corrosive elements in diesel engines: oil, coolants, coolant additives, and temperature ranges of -40 Degree F (-40 Degree C) to +212 Degree F (+100 Degree C). This hose meets SAE requirements J20R1, Class B Tube, Class C Cover, standard wall construction. Note: This hose is NOT suitable for fuel or oil transfer.
Product Features:
See More
Product Features:
- Meets SAE requirements J20R1, Class B Tube, Class C Cover, standard wall construction
- Made with the highest quality woven mesh fabric reinforcement, neoprene cover, and nitrile tube compounds
- Withstands the most corrosive elements in diesel engines: oil, coolants, and coolant additives
- Performs well in temperature ranges of -40 Degree F (-40 Degree C) to +212 Degree F (+100 Degree C)
- PLEASE NOTE: Priced and sold by inch. See store for details.
Find Your Western Star WSH Lower Radiator Hoses by Year
People also search Advance Auto for these popular years of Western Star WSH parts:
