Volvo C30 Parts

Volvo C30 Performance and Racing Products

K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-7010)

Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine

from

$17.49
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.

Product Features:
  • OE replacement oil filters for most cars, trucks, SUVs, motorcycles and ATVs
  • 1″ (automotive) or 17 mm (motorcycle) exposed nut designed for easy removal
  • Heavy-duty construction, high flow rates and outstanding oil filtration
See More

K&N – Cold Air Intake: Adds Up To 15 Horsepower, With Million Mile Air Filter (Part No.69-9000TS)

Cold Air Intake: Adds Up To 15 Horsepower, With Million Mile Air Filter

from

$419.99
The K&N 69-9000TS Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Volvo V50, C30 and S40 models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine’s RPM range. The 69-9000TS air intake comes with a black rubber topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through the intake tube into the engine’s throttle body for a guaranteed power gain. The intake tube has an attractive silver powder-coat finish that’s made to last and it accommodates the factory mass air sensor and crank case vent hose as well as replacement silicone EVAP and carbon filter Vacuum hoses. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a couple of screwdrivers, a ratchet set and several wrenches. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake.

Product Features:
  • GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
  • BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
  • IMPROVED ENGINE SOUND: Hear the power under the hood.
  • WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
  • EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
  • EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
  • DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
  • HIGH QUALITY: Made in America.
See More

K&N – Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration (Part No.33-2873)

Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration

from

$68.99
K&N performance High-Flow Air Filters are engineered to improve engine performance. Unlike disposable paper filters which must be frequently replaced, K&N Air Filters are washable, reusable, and engineered to last for the life of your vehicle. K&N air filters are backed by our famous 10-Year/Million Mile Limited Warranty, and they provide an environmentally friendly way to reduce landfill waste by avoiding disposable filters. Engineered to fit easily into your factory air box, installation can be completed in a matter of minutes! K&N develops and tests each product on the world┐s toughest race tracks, so we can bring the highest level of performance to your daily driving. Join the millions of customers who have saved money and improved vehicle performance by upgrading to K&N filtration.

Product Features:
  • ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
  • RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
  • 4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
  • CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (based on the average miles driven per year of 15,000 miles)
  • ULTIMATE LONGEVITY: No-hassle lifetime warranty on stock replacement K&N air filters- limitations apply
  • EASY INSTALLATION: K&N Air Filters are pre-treated and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
  • ECO-FRIENDLY: Using a washable, reusable engine air filter helps reduce replacement air filter waste- a K&N air filter is designed to last longer than 10 or more disposable filters
  • MADE IN USA: K&N Air Filters are proudly made in the USA for trusted quality & reliability
See More

Volvo C30 Body Parts

Carquest Premium – Dimmer Switch (Part No.SAC3338)

Dimmer Switch

from

$137.99
Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. Vehicle switches provide versatile control for various electrical functions within the vehicle, enhancing convenience and safety by allowing drivers to easily operate features such as lights, wipers, and accessories with a simple flick or press. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:
  • Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
  • Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
  • Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
  • Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.
See More

Burco – Side View Replacement Mirror (Part No.5265)

Side View Replacement Mirror

from

$29.99
Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!

Product Features:
  • Made in USA
  • Exact Fit
  • Safety Smooth Edges
  • Replaces OE Mirror
  • Premium Mirror Glass
  • Break-Free Guarantee
  • Instructions Included
See More

Burco – Door Mirror Replacement Glass (Part No.4171HRSG)

Door Mirror Replacement Glass

from

$49.99
Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!

Product Features:
  • Made in USA
  • Exact Fit
  • Safety Smooth Edges
  • Replaces OE Mirror
  • Premium Mirror Glass
  • Break-Free Guarantee
  • Instructions Included
See More

Burco – Heated Side View Mirror Replacement (Part No.5265H)

Heated Side View Mirror Replacement

from

$59.99
Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!

Product Features:
  • Made in USA
  • Exact Fit
  • Safety Smooth Edges
  • Replaces OE Mirror
  • Premium Mirror Glass
  • Break-Free Guarantee
  • Instructions Included
See More

Dorman – Help – Plastic Backed Door Mirror Glass (Part No.56817)

Plastic Backed Door Mirror Glass

from

$128.99
Cracked mirror glass? This door mirror glass is precision-engineered to match the original door mirror glass of specific vehicle years, makes and models for a simple and permanent replacement job.

Product Features:
  • Direct replacement – this door mirror glass is made to match the original mirror glass on specific vehicles
  • Seamless design – precisely cut to match the shape and look of the factory glass
  • Cost-effective solution – replace only the broken mirror glass rather than the entire mirror assembly
  • Easy installation – follow simple step-by-step procedure to swap out existing glass
See More

Burco – Heated Side View Mirror Replacement (Part No.4171H)

Heated Side View Mirror Replacement

from

$59.99
Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!

Product Features:
  • Made in USA
  • Exact Fit
  • Safety Smooth Edges
  • Replaces OE Mirror
  • Premium Mirror Glass
  • Break-Free Guarantee
  • Instructions Included
See More

Burco – Heated Side View Mirror Replacement with Backing Plate (Part No.5265HRSG)

Heated Side View Mirror Replacement with Backing Plate

from

$79.99
Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!

Product Features:
  • Made in USA
  • Exact Fit
  • Safety Smooth Edges
  • Replaces OE Mirror
  • Premium Mirror Glass
  • Break-Free Guarantee
  • Instructions Included
See More

Burco – Side View Replacement Mirror (Part No.4171)

Side View Replacement Mirror

from

$34.99
Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!

Product Features:
  • Made in USA
  • Exact Fit
  • Safety Smooth Edges
  • Replaces OE Mirror
  • Premium Mirror Glass
  • Break-Free Guarantee
  • Instructions Included
See More

Volvo C30 Transmission Parts

National – Multi Purpose Seal (Part No.221207)

Multi Purpose Seal

from

$10.99
Product Features:
  • Design type: spring loaded; single-lip
  • Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
  • Good low temperature capability
  • Low swell in hydrocarbon fluids
  • Delivers quality and reliable performance for every type of repair
See More

Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)

Transmission Oil Cooler Reinstallation Kit

from

$25.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:
  • Transmission cooler reinstallation kit
  • Contains part numbers 248001, 226201, 240250 and 4 hose clamps
  • Provides all hardware for reinstallation of Imperial transmission coolers
  • Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
  • Made of high grade nylon for easy installation
  • Removable buttons for cooler/fan relocation
  • Made for both transmission coolers and electric fan installation
  • Comes with Quick Connect coupler
See More

ATP – AT CONTR SOLENOID (Part No.RE-50)

AT CONTR SOLENOID

from

$263.99
AT CONTR SOLENOID

ATP – AT CONTR SOLENOID (Part No.RE-49)

AT CONTR SOLENOID

from

$263.99
AT CONTR SOLENOID

National – Automatic Transmission Output Shaft Seal (Part No.710776)

Automatic Transmission Output Shaft Seal

from

$31.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Design type: spring loaded; multi-lip
  • Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
  • Excellent high temperature capabilities
  • Compatible with wide range of fluids
  • Delivers quality and reliable performance for every type of repair
See More

Driveworks – Oil Seal (Part No.S-223830)

Oil Seal

from

$10.29
Value-priced seal meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Koyo – Automatic Transmission Seal (Part No.J507048821KOY)

Automatic Transmission Seal

from

$20.62
Automatic Transmission Seal

Anchor – Torque Strut Motor Mount: Rear, 1 Piece (Part No.3341)

Torque Strut Motor Mount: Rear, 1 Piece

from

$45.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. The Torque Strut prevents engine rocking. Each part is engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to FORD 07-18; VOLVO 07-13;. Please verify your application.

Product Features:
  • MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
  • MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
  • HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
  • SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
  • HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
  • For Years: 2007-2018
  • Weight approx: 2 Lbs
  • SOLID
See More

Anchor – Torque Strut Motor Mount: Rear, 1 Piece (Part No.3214)

Torque Strut Motor Mount: Rear, 1 Piece

from

$36.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. The Torque Strut prevents engine rocking. Each part is engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to FORD 12-21; VOLVO 04-13;. Please verify your application.

Product Features:
  • MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
  • MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
  • HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
  • SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
  • HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
  • For Years: 2004-2021
  • Weight approx: 2 Lbs
  • AIR GAPS
See More

Driveworks – Auto Transmission Manual Shaft Seal (Part No.S-221207)

Auto Transmission Manual Shaft Seal

from

$6.49
Product Features:
  • Brand may vary by location
See More

FAG US – Shaft Seal (Part No.SS2625)

Shaft Seal

from

$25.49
Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.

Product Features:
  • High-precision and High-quality components used in all KITs
  • Coverage of classic and new high-tech solutions for the best system coverage
See More

Imperial – Econo-Kool Transmission Oil Cooler (Part No.242010)

Econo-Kool Transmission Oil Cooler

from

$55.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:
  • Imperial Econo-Kool tube and fin transmission cooler
  • Size: 3/4″ x 5″ x 15-7/8″
  • Compact and mid-size cars
  • GVWR up to 16,000 lbs.; towing up to 2,500 lbs.
  • Compatible with OEM cooler systems
  • Ultrasonically soldered for reliability
  • 100% pressure testing to 150 PSI for quality assurance
  • High efficiency turbulators
  • Compatible with OEM cooler systems
  • Ultrasonically soldered for reliability
  • 100% pressure testing to 150 PSI for quality assurance
  • High efficiency turbulators
See More

Imperial – Maxi-Kool® XL Transmission Oil Cooler (Part No.243007)

Maxi-Kool® XL Transmission Oil Cooler

from

$73.99
Product Features:
  • Imperial Maxi-Cool« plate and fin transmission cooler
  • Size: 3/4″ x 11″ x 7-1/2″
  • Mid-size and full-size cars, pickups
  • GVWR up to 20,000 lbs.; towing up to 2,500 lbs.
  • Compatible with OEM cooler systems
  • Made with the highest quality materials
  • 100% pressure testing to 150 PSI for quality assurance
  • 33% more efficient than a comparable tube and fin design
See More

Imperial – High Performance Transmission Oil Cooler (Part No.240514)

High Performance Transmission Oil Cooler

from

$83.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:
  • Imperial high-performance transmission cooler
  • Size: 3/4″ x 7-1/2″ x 15-7/8″
  • SAE 45-degree fittings for maximum reliability
  • Electrostatic powder-coated to prevent corrosion
  • Up to Class C motorhomes, towing up to 5,000 pounds
  • SAE 45 degree fittings for maximum reliability
  • Electrostatically powder coated to prevent corrosion
  • All aluminum lightweight construction
See More

Imperial – Econo-Kool Transmission Oil Cooler (Part No.242009)

Econo-Kool Transmission Oil Cooler

from

$40.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:
  • Imperial Econo-Kool tube and fin transmission cooler
  • Size: 3/4″ x 5″ x 12-1/2″
  • Sub-compact to compact cars
  • GVWR up to 12,000 lbs.
  • Compatible with OEM cooler systems
  • Ultrasonically soldered for reliability
  • 100% pressure testing to 150 PSI for quality assurance
  • High efficiency turbulators
  • Compatible with OEM cooler systems
  • Ultrasonically soldered for reliability
  • 100% pressure testing to 150 PSI for quality assurance
  • High efficiency turbulators
See More

National – Multi-Purpose Seal (Part No.224040)

Multi-Purpose Seal

from

$14.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Design type: spring loaded; single-lip
  • Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
  • Good low temperature capability
  • Low swell in hydrocarbon fluids
  • Delivers quality and reliable performance for every type of repair
See More

National – Automatic Transmission Output Shaft Seal (Part No.710582)

Automatic Transmission Output Shaft Seal

from

$20.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Design type: spring loaded; multi-lip
  • Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
  • Excellent high temperature capabilities
  • Compatible with wide range of fluids
  • Delivers quality and reliable performance for every type of repair
See More

National – Automatic Transmission Output Shaft Seal (Part No.710773)

Automatic Transmission Output Shaft Seal

from

$19.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Design type: spring loaded; multi-lip
  • Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
  • Resistance to EP lubricants
  • Low swell in hydrocarbon fluids
  • Delivers quality and reliable performance for every type of repair
See More

Volvo C30 Clutch Systems

LuK – Clutch Kit: 9 7/16" Disc Diameter, 1" Input Shaft Diameter, 23 Tooth Spline (Part No.22-044)

Clutch Kit: 9 7/16" Disc Diameter, 1" Input Shaft Diameter, 23 Tooth Spline

from

$558.99
LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet® clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.

Product Features:
  • Application matched for OE form, fit, and function
  • Manufactured with high-quality materials, using cutting edge technology and processes
  • Stock photo – Actual parts and materials may vary.
See More

LuK – Clutch Kit: 9 7/16" Disc Diameter, 1" Input Shaft Diameter, 23 Tooth Spline (Part No.22-036)

Clutch Kit: 9 7/16" Disc Diameter, 1" Input Shaft Diameter, 23 Tooth Spline

from

$461.99
LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet® clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.

Product Features:
  • Application matched for OE form, fit, and function
  • Manufactured with high-quality materials, using cutting edge technology and processes
  • Stock photo – Actual parts and materials may vary.
See More

LuK – Original Equipment Quality Replacement Dual Mass Flywheel (Part No.DMF137)

Original Equipment Quality Replacement Dual Mass Flywheel

from

$841.99
LuK: Don’t gamble – stay with the original LuK DMF! The LuK DMF prevents damages solid flywheels may cause. The LUK Dual Mass Flywheel (DMF) is individually fine-tuned for every type of car. The risks of using solid flywheels are numerous – from increased wear of engine mounts through gearbox failure to damaged crankshafts.
See More

LuK – Clutch Slave Cylinder (Part No.LSC583)

Clutch Slave Cylinder

from

$251.99
Schaeffler has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
See More

Volvo C30 Automotive Accessories

PantsSaver – Custom Fit 4 Piece Floor Mat Set, Tan (Part No.4401133)

Custom Fit 4 Piece Floor Mat Set, Tan

from

$129.99
Designed custom fit the complex contours and surfaces of your vehicle’s floor space. Pants Saver Custom Fit Car Mat will protect your interior carpet and help keep Deep grooves channel water, snow, mud, spills, and debris to a unique central pan that traps up to 500 mL (16 oz.) of water and easily wipe or rinse clean. CUSTOM FIT: Your car mat are cut to order to fit the exact layout so that it install in seconds with no screws, bolts, fasteners, or tools required. PROTECT YOUR CAR AND CLOTHING: Deep grooves channel water, snow, mud, spills, and debris to a unique central pan that traps up to 500 mL (16 oz.) of liquid and easily wipe or rinse clean. SUPERIOR ALL WEATHER PERFORMANCE CAR MATS: Made from non-toxic, wear-resistant recycled PVC, BPA-free PantsSaver mats are waterproof and odorless even in extreme weather and maintain flexibility and durability down to minus 76 Deg. F (-60 Deg. C). NON-SLIP DESIGN: Flexible nibs grip the floor to keep the mat in place without damaging your vehicle carpet. MADE IN NORTH AMERICA: Proudly manufactured in Canada by members of the United Steelworkers (USW Local 1-500).

Product Features:
  • Custom Fit – Perfect Custom Fit for you Vehicle with full coverage. Mats are Non-toxic, Odorless, Contain No Latex
  • All Weather Protection – The Floor Mats are designed to provide complete automotive interior protection from dirt, mud, salt, rain, snow and keep your vehicle¿s floor clean and fresh in all Seasons
  • All Weather Protection – The Floor Mats are designed to provide complete automotive interior protection from dirt, mud, salt, rain, snow and keep your vehicle┐s floor clean and fresh in all Seasons
  • Built To Last – Offers waterproof protection with a Guard Against Spills and Debris
  • Easy to Clean – Simply spray with a hose, wipe with a washcloth or vaccum to remove Dirt, Grit, and Grime to leave them looking and feeling like Brand New
  • No-Slip Grip – Rubberized Nibs on the Bottom so the Mat Does not Move – Ergonomic Grooves on Top to Give your Foot Traction & Comfort
  • Custom Fit Car Mats
  • Anti Skid
  • Raised Borders
  • All Weather Protection
  • Odorless
See More

PantsSaver – Custom Fit 4 Piece Floor Mat Set, Black (Part No.4401121)

Custom Fit 4 Piece Floor Mat Set, Black

from

$129.99
Designed custom fit the complex contours and surfaces of your vehicle’s floor space. Pants Saver Custom Fit Car Mat will protect your interior carpet and help keep Deep grooves channel water, snow, mud, spills, and debris to a unique central pan that traps up to 500 mL (16 oz.) of water and easily wipe or rinse clean. CUSTOM FIT: Your car mat are cut to order to fit the exact layout so that it install in seconds with no screws, bolts, fasteners, or tools required. PROTECT YOUR CAR AND CLOTHING: Deep grooves channel water, snow, mud, spills, and debris to a unique central pan that traps up to 500 mL (16 oz.) of liquid and easily wipe or rinse clean. SUPERIOR ALL WEATHER PERFORMANCE CAR MATS: Made from non-toxic, wear-resistant recycled PVC, BPA-free PantsSaver mats are waterproof and odorless even in extreme weather and maintain flexibility and durability down to minus 76 Deg. F (-60 Deg. C). NON-SLIP DESIGN: Flexible nibs grip the floor to keep the mat in place without damaging your vehicle carpet. MADE IN NORTH AMERICA: Proudly manufactured in Canada by members of the United Steelworkers (USW Local 1-500).

Product Features:
  • Custom Fit – Perfect Custom Fit for you Vehicle with full coverage. Mats are Non-toxic, Odorless, Contain No Latex
  • All Weather Protection – The Floor Mats are designed to provide complete automotive interior protection from dirt, mud, salt, rain, snow and keep your vehicle¿s floor clean and fresh in all Seasons
  • All Weather Protection – The Floor Mats are designed to provide complete automotive interior protection from dirt, mud, salt, rain, snow and keep your vehicle┐s floor clean and fresh in all Seasons
  • Built To Last – Offers waterproof protection with a Guard Against Spills and Debris
  • Easy to Clean – Simply spray with a hose, wipe with a washcloth or vaccum to remove Dirt, Grit, and Grime to leave them looking and feeling like Brand New
  • No-Slip Grip – Rubberized Nibs on the Bottom so the Mat Does not Move – Ergonomic Grooves on Top to Give your Foot Traction & Comfort
  • Custom Fit Car Mats
  • Anti Skid
  • Raised Borders
  • All Weather Protection
  • Odorless
See More

PantsSaver – Custom Fit 4 Piece Floor Mat Set, Black (Part No.4401101)

Custom Fit 4 Piece Floor Mat Set, Black

from

$129.99
Designed custom fit the complex contours and surfaces of your vehicle’s floor space. Pants Saver Custom Fit Car Mat will protect your interior carpet and help keep Deep grooves channel water, snow, mud, spills, and debris to a unique central pan that traps up to 500 mL (16 oz.) of water and easily wipe or rinse clean. CUSTOM FIT: Your car mat are cut to order to fit the exact layout so that it install in seconds with no screws, bolts, fasteners, or tools required. PROTECT YOUR CAR AND CLOTHING: Deep grooves channel water, snow, mud, spills, and debris to a unique central pan that traps up to 500 mL (16 oz.) of liquid and easily wipe or rinse clean. SUPERIOR ALL WEATHER PERFORMANCE CAR MATS: Made from non-toxic, wear-resistant recycled PVC, BPA-free PantsSaver mats are waterproof and odorless even in extreme weather and maintain flexibility and durability down to minus 76 Deg. F (-60 Deg. C). NON-SLIP DESIGN: Flexible nibs grip the floor to keep the mat in place without damaging your vehicle carpet. MADE IN NORTH AMERICA: Proudly manufactured in Canada by members of the United Steelworkers (USW Local 1-500).

Product Features:
  • Custom Fit – Perfect Custom Fit for you Vehicle with full coverage. Mats are Non-toxic, Odorless, Contain No Latex
  • All Weather Protection – The Floor Mats are designed to provide complete automotive interior protection from dirt, mud, salt, rain, snow and keep your vehicle¿s floor clean and fresh in all Seasons
  • All Weather Protection – The Floor Mats are designed to provide complete automotive interior protection from dirt, mud, salt, rain, snow and keep your vehicle┐s floor clean and fresh in all Seasons
  • Built To Last – Offers waterproof protection with a Guard Against Spills and Debris
  • Easy to Clean – Simply spray with a hose, wipe with a washcloth or vaccum to remove Dirt, Grit, and Grime to leave them looking and feeling like Brand New
  • No-Slip Grip – Rubberized Nibs on the Bottom so the Mat Does not Move – Ergonomic Grooves on Top to Give your Foot Traction & Comfort
  • Custom Fit Car Mats
  • Anti Skid
  • Raised Borders
  • All Weather Protection
  • Odorless
See More

PantsSaver – Custom Fit 4 Piece Floor Mat Set, Grey (Part No.4401112)

Custom Fit 4 Piece Floor Mat Set, Grey

from

$129.99
Designed custom fit the complex contours and surfaces of your vehicle’s floor space. Pants Saver Custom Fit Car Mat will protect your interior carpet and help keep Deep grooves channel water, snow, mud, spills, and debris to a unique central pan that traps up to 500 mL (16 oz.) of water and easily wipe or rinse clean. CUSTOM FIT: Your car mat are cut to order to fit the exact layout so that it install in seconds with no screws, bolts, fasteners, or tools required. PROTECT YOUR CAR AND CLOTHING: Deep grooves channel water, snow, mud, spills, and debris to a unique central pan that traps up to 500 mL (16 oz.) of liquid and easily wipe or rinse clean. SUPERIOR ALL WEATHER PERFORMANCE CAR MATS: Made from non-toxic, wear-resistant recycled PVC, BPA-free PantsSaver mats are waterproof and odorless even in extreme weather and maintain flexibility and durability down to minus 76 Deg. F (-60 Deg. C). NON-SLIP DESIGN: Flexible nibs grip the floor to keep the mat in place without damaging your vehicle carpet. MADE IN NORTH AMERICA: Proudly manufactured in Canada by members of the United Steelworkers (USW Local 1-500).

Product Features:
  • Custom Fit – Perfect Custom Fit for you Vehicle with full coverage. Mats are Non-toxic, Odorless, Contain No Latex
  • All Weather Protection – The Floor Mats are designed to provide complete automotive interior protection from dirt, mud, salt, rain, snow and keep your vehicle¿s floor clean and fresh in all Seasons
  • All Weather Protection – The Floor Mats are designed to provide complete automotive interior protection from dirt, mud, salt, rain, snow and keep your vehicle┐s floor clean and fresh in all Seasons
  • Built To Last – Offers waterproof protection with a Guard Against Spills and Debris
  • Easy to Clean – Simply spray with a hose, wipe with a washcloth or vaccum to remove Dirt, Grit, and Grime to leave them looking and feeling like Brand New
  • No-Slip Grip – Rubberized Nibs on the Bottom so the Mat Does not Move – Ergonomic Grooves on Top to Give your Foot Traction & Comfort
  • Custom Fit Car Mats
  • Anti Skid
  • Raised Borders
  • All Weather Protection
  • Odorless
See More

PantsSaver – Custom Fit 4 Piece Floor Mat Set, Grey (Part No.4401102)

Custom Fit 4 Piece Floor Mat Set, Grey

from

$129.99
Designed custom fit the complex contours and surfaces of your vehicle’s floor space. Pants Saver Custom Fit Car Mat will protect your interior carpet and help keep Deep grooves channel water, snow, mud, spills, and debris to a unique central pan that traps up to 500 mL (16 oz.) of water and easily wipe or rinse clean. CUSTOM FIT: Your car mat are cut to order to fit the exact layout so that it install in seconds with no screws, bolts, fasteners, or tools required. PROTECT YOUR CAR AND CLOTHING: Deep grooves channel water, snow, mud, spills, and debris to a unique central pan that traps up to 500 mL (16 oz.) of liquid and easily wipe or rinse clean. SUPERIOR ALL WEATHER PERFORMANCE CAR MATS: Made from non-toxic, wear-resistant recycled PVC, BPA-free PantsSaver mats are waterproof and odorless even in extreme weather and maintain flexibility and durability down to minus 76 Deg. F (-60 Deg. C). NON-SLIP DESIGN: Flexible nibs grip the floor to keep the mat in place without damaging your vehicle carpet. MADE IN NORTH AMERICA: Proudly manufactured in Canada by members of the United Steelworkers (USW Local 1-500).

Product Features:
  • Custom Fit – Perfect Custom Fit for you Vehicle with full coverage. Mats are Non-toxic, Odorless, Contain No Latex
  • All Weather Protection – The Floor Mats are designed to provide complete automotive interior protection from dirt, mud, salt, rain, snow and keep your vehicle¿s floor clean and fresh in all Seasons
  • All Weather Protection – The Floor Mats are designed to provide complete automotive interior protection from dirt, mud, salt, rain, snow and keep your vehicle┐s floor clean and fresh in all Seasons
  • Built To Last – Offers waterproof protection with a Guard Against Spills and Debris
  • Easy to Clean – Simply spray with a hose, wipe with a washcloth or vaccum to remove Dirt, Grit, and Grime to leave them looking and feeling like Brand New
  • No-Slip Grip – Rubberized Nibs on the Bottom so the Mat Does not Move – Ergonomic Grooves on Top to Give your Foot Traction & Comfort
  • Custom Fit Car Mats
  • Anti Skid
  • Raised Borders
  • All Weather Protection
  • Odorless
See More

PantsSaver – Custom Fit 4 Piece Floor Mat Set, Black (Part No.4401131)

Custom Fit 4 Piece Floor Mat Set, Black

from

$129.99
Designed custom fit the complex contours and surfaces of your vehicle’s floor space. Pants Saver Custom Fit Car Mat will protect your interior carpet and help keep Deep grooves channel water, snow, mud, spills, and debris to a unique central pan that traps up to 500 mL (16 oz.) of water and easily wipe or rinse clean. CUSTOM FIT: Your car mat are cut to order to fit the exact layout so that it install in seconds with no screws, bolts, fasteners, or tools required. PROTECT YOUR CAR AND CLOTHING: Deep grooves channel water, snow, mud, spills, and debris to a unique central pan that traps up to 500 mL (16 oz.) of liquid and easily wipe or rinse clean. SUPERIOR ALL WEATHER PERFORMANCE CAR MATS: Made from non-toxic, wear-resistant recycled PVC, BPA-free PantsSaver mats are waterproof and odorless even in extreme weather and maintain flexibility and durability down to minus 76 Deg. F (-60 Deg. C). NON-SLIP DESIGN: Flexible nibs grip the floor to keep the mat in place without damaging your vehicle carpet. MADE IN NORTH AMERICA: Proudly manufactured in Canada by members of the United Steelworkers (USW Local 1-500).

Product Features:
  • Custom Fit – Perfect Custom Fit for you Vehicle with full coverage. Mats are Non-toxic, Odorless, Contain No Latex
  • All Weather Protection – The Floor Mats are designed to provide complete automotive interior protection from dirt, mud, salt, rain, snow and keep your vehicle¿s floor clean and fresh in all Seasons
  • All Weather Protection – The Floor Mats are designed to provide complete automotive interior protection from dirt, mud, salt, rain, snow and keep your vehicle┐s floor clean and fresh in all Seasons
  • Built To Last – Offers waterproof protection with a Guard Against Spills and Debris
  • Easy to Clean – Simply spray with a hose, wipe with a washcloth or vaccum to remove Dirt, Grit, and Grime to leave them looking and feeling like Brand New
  • No-Slip Grip – Rubberized Nibs on the Bottom so the Mat Does not Move – Ergonomic Grooves on Top to Give your Foot Traction & Comfort
  • Custom Fit Car Mats
  • Anti Skid
  • Raised Borders
  • All Weather Protection
  • Odorless
See More

PantsSaver – Custom Fit 4 Piece Floor Mat Set, Tan (Part No.4401113)

Custom Fit 4 Piece Floor Mat Set, Tan

from

$129.99
Designed custom fit the complex contours and surfaces of your vehicle’s floor space. Pants Saver Custom Fit Car Mat will protect your interior carpet and help keep Deep grooves channel water, snow, mud, spills, and debris to a unique central pan that traps up to 500 mL (16 oz.) of water and easily wipe or rinse clean. CUSTOM FIT: Your car mat are cut to order to fit the exact layout so that it install in seconds with no screws, bolts, fasteners, or tools required. PROTECT YOUR CAR AND CLOTHING: Deep grooves channel water, snow, mud, spills, and debris to a unique central pan that traps up to 500 mL (16 oz.) of liquid and easily wipe or rinse clean. SUPERIOR ALL WEATHER PERFORMANCE CAR MATS: Made from non-toxic, wear-resistant recycled PVC, BPA-free PantsSaver mats are waterproof and odorless even in extreme weather and maintain flexibility and durability down to minus 76 Deg. F (-60 Deg. C). NON-SLIP DESIGN: Flexible nibs grip the floor to keep the mat in place without damaging your vehicle carpet. MADE IN NORTH AMERICA: Proudly manufactured in Canada by members of the United Steelworkers (USW Local 1-500).

Product Features:
  • Custom Fit – Perfect Custom Fit for you Vehicle with full coverage. Mats are Non-toxic, Odorless, Contain No Latex
  • All Weather Protection – The Floor Mats are designed to provide complete automotive interior protection from dirt, mud, salt, rain, snow and keep your vehicle¿s floor clean and fresh in all Seasons
  • All Weather Protection – The Floor Mats are designed to provide complete automotive interior protection from dirt, mud, salt, rain, snow and keep your vehicle┐s floor clean and fresh in all Seasons
  • Built To Last – Offers waterproof protection with a Guard Against Spills and Debris
  • Easy to Clean – Simply spray with a hose, wipe with a washcloth or vaccum to remove Dirt, Grit, and Grime to leave them looking and feeling like Brand New
  • No-Slip Grip – Rubberized Nibs on the Bottom so the Mat Does not Move – Ergonomic Grooves on Top to Give your Foot Traction & Comfort
  • Custom Fit Car Mats
  • Anti Skid
  • Raised Borders
  • All Weather Protection
  • Odorless
See More

PantsSaver – Custom Fit 4 Piece Floor Mat Set, Tan (Part No.4401123)

Custom Fit 4 Piece Floor Mat Set, Tan

from

$129.99
Designed custom fit the complex contours and surfaces of your vehicle’s floor space. Pants Saver Custom Fit Car Mat will protect your interior carpet and help keep Deep grooves channel water, snow, mud, spills, and debris to a unique central pan that traps up to 500 mL (16 oz.) of water and easily wipe or rinse clean. CUSTOM FIT: Your car mat are cut to order to fit the exact layout so that it install in seconds with no screws, bolts, fasteners, or tools required. PROTECT YOUR CAR AND CLOTHING: Deep grooves channel water, snow, mud, spills, and debris to a unique central pan that traps up to 500 mL (16 oz.) of liquid and easily wipe or rinse clean. SUPERIOR ALL WEATHER PERFORMANCE CAR MATS: Made from non-toxic, wear-resistant recycled PVC, BPA-free PantsSaver mats are waterproof and odorless even in extreme weather and maintain flexibility and durability down to minus 76 Deg. F (-60 Deg. C). NON-SLIP DESIGN: Flexible nibs grip the floor to keep the mat in place without damaging your vehicle carpet. MADE IN NORTH AMERICA: Proudly manufactured in Canada by members of the United Steelworkers (USW Local 1-500).

Product Features:
  • Custom Fit – Perfect Custom Fit for you Vehicle with full coverage. Mats are Non-toxic, Odorless, Contain No Latex
  • All Weather Protection – The Floor Mats are designed to provide complete automotive interior protection from dirt, mud, salt, rain, snow and keep your vehicle¿s floor clean and fresh in all Seasons
  • All Weather Protection – The Floor Mats are designed to provide complete automotive interior protection from dirt, mud, salt, rain, snow and keep your vehicle┐s floor clean and fresh in all Seasons
  • Built To Last – Offers waterproof protection with a Guard Against Spills and Debris
  • Easy to Clean – Simply spray with a hose, wipe with a washcloth or vaccum to remove Dirt, Grit, and Grime to leave them looking and feeling like Brand New
  • No-Slip Grip – Rubberized Nibs on the Bottom so the Mat Does not Move – Ergonomic Grooves on Top to Give your Foot Traction & Comfort
  • Custom Fit Car Mats
  • Anti Skid
  • Raised Borders
  • All Weather Protection
  • Odorless
See More

Budge – Rain Barrier Hatchback Cover, Fits up to 15′ 2" L, Water Resistant, Breathable (Part No.RBHB-2)

Rain Barrier Hatchback Cover, Fits up to 15' 2" L, Water Resistant, Breathable

from

$99.99
The Budge Rain Barrier hatchback car cover offers easy to use, 100% waterproof indoor and outdoor protection. This vehicle cover is constructed from a 3 layer material consisting of an inside and outside layer of spun-bond polypropylene. The middle layer is made from a waterproof film. Unlike most waterproof car covers, the Budge Rain Barrier features micro-pore technology that allows condensation to escape as evaporated gas, giving your vehicle inside and outside protection. This cover is great for outdoor and indoor use. The soft, nonabrasive material will not harm the surface of your vehicle. This cover features a full elastic hem and built-in grommets. This cover is available in a gray color. Includes a storage bag and antenna patch.

Product Features:
  • This hatchback car cover fits cars 183″ L x 59″ W x 51″ H
  • This waterproof car cover will defend against outdoor elements like rain, snow, sun, dirt, dust and more
  • This car cover is made from a 3 layer microporous material that makes an ultimate rain barrier
  • This vehicle cover features ultrasonically welded seams for extra durability and a full elastic hem to help keep your cover secure to your car
  • Full elastic hem to keep the cover securely on the vehicle
See More

Budge – Protector V Hatchback Cover, Gray, Size HB-2 Fits up to 15 ft. 2 in. L, 5 Layer AllWeather (Part No.5LHBF2)

Protector V Hatchback Cover, Gray, Size HB-2 Fits up to 15 ft. 2 in. L, 5 Layer AllWeather

from

$139.99
The Protector V hatchback cover features 5 durable layers to ensure 100% waterproof protection. This car cover is made from three layers of polypropylene that rests on top of a fully waterproof membrane. The inner most layer is made from a nonabrasive fleece material so you won’t have to worry about scratching your vehicle. The Protector V is UV resistant, waterproof, breathable and durable making it ideal for all-weather protection. Cover comes with a built in strap and buckle system. This hatchback car cover fits cars 183″ L x 59″ W x 51″ H.

Product Features:
  • This hatchback car cover fits cars 183″ L x 59″ W x 51″ H.
  • This car cover is made from 5 durable layers – our thickest cover yet!
  • This car cover is 100% waterproof and UV resistant for superior outdoor protection
  • This auto cover has a soft fleece inner lining that pampers your vehicle’s paint
  • Built-in strap and buckle system keeps your hatchback cover secure
See More

Fiamm – Freeway Blaster High Note Horn: High Tone, 133 dB (Part No.7210223)

Freeway Blaster High Note Horn: High Tone, 133 dB

from

$25.99
Extremely powerful AM-80SX horn. Is an excellent replacement for stock AM-80SX or HK-9 disc style horns. Each horn is tested to assure maximum performance.

Product Features:
  • FIAMM AM80SX HIGH note two terminal Freeway Blaster features aluminum coil motor, corrosion resistant steel housing and an ABS plastic projector.
  • FIAMM horn package Includes: Universal mounting bracket, jumper wire, nut and female connectors
  • Each FIAMM horn is tested to assure maximum performance and exceeds SAE and OEM specifications
  • FIAMM horn can be installed on any vehicle, UTV, ATV, or Motorcycle
  • 133dB at 4″, 12V
See More

Search Over 804 Volvo C30 Parts Online for Delivery or Pick Up

Looking for the best Volvo C30 aftermarket replacement parts? Replacing worn and broken parts on your Volvo C30? Check out our online catalog to find the best selection of aftermarket Volvo C30 parts as well as real user reviews on Volvo C30 replacement parts. Make an informed decision about every component you add to your C30.

At Advance Auto, we’ve got you covered when it comes to getting your Volvo C30 in tip top condition. We’ve got over 804 Volvo C30 parts to choose from in popular categories like Performance and Racing Products, Body Parts and Transmission Parts. If you’re looking for the best prices, try searching our Volvo C30 parts catalog to compare OEM and aftermarket parts for your Volvo C30.

Whether you need Volvo C30 body parts, interior components, or custom Volvo C30 parts you can find them online at Advance Auto. Want to order your Clutch Systems online? Or maybe you need your Volvo Automotive Accessories same day? No problem, you can pick up C30 parts in person at locations across the country, or have them delivered to straight to your door after ordering online. Finding a great deal on new and used Volvo C30 parts has never been easier.