Volvo 745 Parts

Volvo 745 Body Parts

from

$59.99

AVS continues its high-quality automotive accessories with the AVS Windflector. Add the AVS Windflector to your vehicle today and get back the fresh air, warm sun and driving enjoyment you’ve been missing. This wind deflector adds a sturdy shield to the leading edge of your sunroof or moonroof in just minutes. Once installed, AVS Windflector deflects wind and moisture from your cabin, and helps reduce heat buildup inside the vehicle.

Product Features:

The Windflector greatly reduces sunroof wind noise and air turbulence
Prevents the rain from entering the sunroof opening while driving
Helps reduce heat buildup inside the vehicle
Available in 5 different sizes for perfect fit
No drill installation
Installs quickly and easily with 3M automotive-grade adhesive

from

$40.99

Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.

Product Features:

Heavy Gauge Steel Body
Self-Cleaning Piston Assembly
Rubber O-Ring Piston Seal

from

$27.99

Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!

Product Features:

Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
Easy Install – Less than 15 Minutes! based on average install time across all parts
No Special Tools Required
Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
Trilingual Install Instructions provided inside each package

from

$27.99

New Standard Replacement Driver Side Front Exterior Door Handle, Black

Product Features:

Black, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$2.12

Trim Fastener

Volvo 745 Transmission Parts

from

$17.99

Manufactured with premium-grade steel, National® taper bearing cones feature crowned raceways and rollers to ensure even load distribution.

Product Features:

PREMIUM MATERIALS — Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION — Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN — Engineered to meet OE specifications
COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$7.29

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$22.67

Crankshaft Seal

from

$10.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design Type: Spring Loaded; Multi-Lip
Provides good low temperature capability
Low swell in hydrocarbon fluids
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers reliable performance for every type of repair

from

$15.99

Design type: springless; single-lip
Temperature range: -100°F to 450°F; -73°C to 232°C
Resistant to hydrocarbon/oxygenate blends and provides superior performance
Provides excellent dry running capabilities, low coefficient of friction and excellent resistance to chemicals
Delivers quality and reliable performance for every type of repair

from

$39.99

Product Features:

Imperial Econo-Kool« tube and fin transmission cooler
Size: 3/4″ x 5″ x 12-1/2″
Sub-compact to compact cars
GVWR up to 12,000 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$32.99

OEM specified. Designed specially for high-torque and high vibration applications, like those common in import engines, this premium RTV gasket maker exceeds manufacturers’ performance requirements. Sensor-safe, low odor, and non-corrosive. Maximum vibration resistance, with outstanding resistance to oils, cooling and shop fluids. Temperature range -65ºF to 500ºF (-54 Deg. C to 260 Deg. C) intermittent.

Product Features:

Designed specially for high-torque and high vibration applications
Maximum vibration resistance with outstanding resistance to oils, cooling and shop fluids
OEM specified
Low-odor, non-corrosive formula
Temperature Range: -65 Deg. F to 500 Deg. F (-54 Deg. C to 260 Deg. C)

from

$6.99

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$28.99

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -80°F to 350°F / -62°C to 176°C
Good dry heat resistance
Excellent low temperature capability
Delivers quality and reliable performance for every type of repair

from

$9.29

from

$9.49

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to VOLVO 75-93;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1975-1993
Weight approx: 1 Lbs

from

$9.29

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$6.79

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$49.99

Designed to provide enhanced endurance and maximum contamination exclusion while ensuring proper fit, form and function.

from

$7.79

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$12.99

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$18.99

BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:

100% pure copper windings in primary and secondary bobbins improve durability and provide higher resistance to internal shorts and dielectric breakdown
Electronic ignition module profile and feedback signal ensures proper OE fit, form, and function
Thermoplastic housing withstands heat stress for enhanced durability
Internal core made from grain oriented electrical steel limits loss factor within magnetic circuit to reduce heat and ensure coil endurance
External core made from oriented silicon steel ensures durability and longevity

from

$36.49

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$8.49

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$4.99

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$11.99

SHAFT SEAL

from

$15.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$7.29

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$10.49

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

Volvo 745 Clutch Systems

from

$22.99

This clutch pilot bearing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this clutch pilot bearing is designed to match the fit and function of the original part on specified vehicles.
Ideal solution – this bearing is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$23.29

Direct replacement – this clutch pilot bearing is designed to match the fit and function of the original part on specified vehicles.
Ideal solution – this bearing is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$95.04

The Sachs release bearing (also known as a throw-out bearing) is original equipment quality and maintains the equivalent fit and performance as the OE part it replaces. Sachs clutch release bearings offer the conventional alignment function in a lightweight, compact body.

Product Features:

Extended service life
Compact, lightweight design
Sealed for life with high performance, application-specific grease
Simplified assembly
Integrated functionality
Design flexibility

from

$38.99

Clutch cables connect the clutch pedal to the transmission shift fork. Old cables can bind, break, or just become sluggish. The best repair is to replace the old cable with a new one. ATP Clutch cables are designed to fit and function just like the original part to ensure durability and long life.

Product Features:

Includes brackets, grommets, etc to match original
Returns clutch petal feel to normal
Allows proper clutch engagement

Volvo 745 Automotive Accessories

from

$744.99

Sunbrella custom fit car covers are top quality outdoor covers, specifically crafted to withstand the harshest Arizona desert sun. This heavy-duty cover withstands high heat, high temperatures, and damaging UV rays. Treated for moisture resistance in humid marine areas as well. Constructed from woven acrylic fabric that is solution-dyed for ultimate color protection. Custom cut to fit your exact vehicle. Installs easily with a tie-down cab.

Product Features:

Best for intense sun locations
Durable long-lasting fabric
Solution dyed woven acrylic fabric
Provides almost complete UV blockage

from

$744.99

Best for intense sun locations
Durable long-lasting fabric
Solution dyed woven acrylic fabric
Provides almost complete UV blockage

from

$265.99

Covercraft’s custom fit Polycotton Car Cover provides good basic indoor protection for your vehicle. A good choice for a budget conscience shopper looking for basic coverage and protection. Constructed from drill weave Polycotton blend materials. Fabric is soft and durable to protect your paint finish. Polyester material is sun and water resistant. Comes in gray.

Product Features:

Good basic indoor protection
Drill weave Polycotton blend
Resists tears and punctures
Treated to resist rot and mildew

from

$745.99

As the most heavy duty car covers on the market, the WeatherShield HD car cover is built to handle the most intense weather and climates. Toughest of the tough, the WeatherShield HD car covers are constructed from 40% heavier fabric and stronger thread providing double the tear strength, double the tensile strength. Proprietary processes place a specially formulated finish inside the fabric, bonding each individual thread so there is virtually no space between them for water or dirt or pollutants to enter. The WeatherShield HD may not be as silky-smooth as other car covers, but it will out perform them in harsh climates! Designed as a long-term storage solution.

Product Features:

The most heavy-duty car cover on the market
Specially treated to resist fading and color transfer
Sheds water and blocks out dust
Outsmart the outdoors!

from

$457.99

For those who like traditional woven fabrics for indoor car cover protection, the Tan Flannel is the perfect choice. This is a high performance indoor fabric with a durable Polycotton blend on the outside and a flannel underside soft napped finish. Its long wearing and breathable. Specially treated to repel moisture and resist rot and mildew.

Product Features:

A favorite amongst car enthusiasts
Flannel lined for an ultra-soft, paint-friendly cover
Constructed from all cotton based materials
Our ‘classic’ indoor cover

from

$744.99

Best for intense sun locations
Durable long-lasting fabric
Solution dyed woven acrylic fabric
Provides almost complete UV blockage

from

$59.99

The Windflector greatly reduces sunroof wind noise and air turbulence
Prevents the rain from entering the sunroof opening while driving
Helps reduce heat buildup inside the vehicle
Available in 5 different sizes for perfect fit
No drill installation
Installs quickly and easily with 3M automotive-grade adhesive

from

$59.99

The Windflector greatly reduces sunroof wind noise and air turbulence
Prevents the rain from entering the sunroof opening while driving
Helps reduce heat buildup inside the vehicle
Available in 5 different sizes for perfect fit
No drill installation
Installs quickly and easily with 3M automotive-grade adhesive

from

$59.99

The Windflector greatly reduces sunroof wind noise and air turbulence
Prevents the rain from entering the sunroof opening while driving
Helps reduce heat buildup inside the vehicle
Available in 5 different sizes for perfect fit
No drill installation
Installs quickly and easily with 3M automotive-grade adhesive

from

$59.99

The Windflector greatly reduces sunroof wind noise and air turbulence
Prevents the rain from entering the sunroof opening while driving
Helps reduce heat buildup inside the vehicle
Available in 5 different sizes for a perfect fit
No drill installation
Installs quickly and easily with 3M automotive-grade adhesive

from

$59.99

The Windflector greatly reduces sunroof wind noise and air turbulence
Prevents the rain from entering the sunroof opening while driving
Helps reduce heat buildup inside the vehicle
Available in 5 different sizes for perfect fit
No drill installation
Installs quickly and easily with 3M automotive-grade adhesive

from

$40.99

Freeze Plug Heater, also referred to as a block heater or frost plug heater is the most reliable and efficient way to pre-heat your engine. Operates by being directly submerged into coolant and heating the block. Requires mechanical ability to install.

Product Features:

Saves wear and tear on your engine
Simple installation directly into engine block

from

$56.99

Lower Radiator Hose Heater

from

$84.99

Circulation Tank Heater is Available in 850W, 1000W, 1500W, and 2000W, 120V and 240V. This heater is thermostatically controlled 135 degrees-175 degrees. Moderate mechanical ability is required for installation. Uses versatile strap type mounting.

Product Features:

Available for all size engines
Equipped with check valve
Fits most liquid cooled engines
Installations easier and simpler
New lower radiator hose connectors

from

$36.99

Saves wear and tear on your engine
Simple installation directly into engine block

from

$81.99

Available for all size engines
Equipped with check valve
Fits most liquid cooled engines
Installations easier and simpler
New lower radiator hose connectors

from

$56.99

Lower Radiator Hose Heater

from

$63.99

Saves wear and tear on your engine
Simple installation directly into engine block

Volvo 745 Engine Parts

from

$1.29

This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$10.29

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Formulated for prelubrication cam lobes, lifters & engine bearings
Increases load carrying capacity
Holds fast to surfaces
Exacting tolerances
Meets or exceeds OEM specifications
4.0 oz. Squeeze Container

from

$255.99

Made in USA. Melling oil pumps provide dependable performance every time in every application. Every Melling oil pump is engineered and assembled to the highest production standards from high quality materials. All Melling oil pumps use the latest in gear and gerotor technology to provide the highest level of quality and performance. Gears are machined to close tolerances to ensure proper engine pressure and correct, efficient pump operation. End plates are precision ground for maximum wear resistance. Every Melling oil pump is individually tested for pressure and flow under conditions designed to duplicate actual engine operating conditions.

Product Features:

Manufactured from high quality materials for consistent durable wear
Precision engineered for optimum fit and function
Designed for long-life and worry-free performance
Meets or exceeds original equipment specifications

from

$3.84

All-around safety and reliability: Elring oil seals are manufactured for a wide range of applications. Whether they are installed in camshafts, crankshafts or axles, the high-precision seals are guaranteed to offer outstanding performance. Elring oil seals are made from tailor-made elastomer compounds to ensure excellent functionality and a long service life. They are available in various sizes and are supplied with detailed installation instructions.

Product Features:

Premium-quality materials such as FPM, ACM and PTFE for superior operational reliability
Various designs specifically adapted to the area of application ensure excellent functionality and performance
High-performance FPM guarantees optimum leak tightness

from

$23.17

TRW is one of the world’s leading providers of Original Equipment chassis systems. TRW now manufactures one quarter of the world’s chassis components – leading the market in the design, development, manufacture and integration of chassis systems for passenger cars. With over 40 vehicle manufacturers as customers, TRW’s Original Equipment business has to be able to adapt its technologies to the demands of very different vehicles, from the most basic in developing countries to some of the most sophisticated vehicle systems in the world.

from

$50.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
Validated for fit, form and function
Unsurpassed quality you can trust

from

$29.21

Turbo Hose

from

$37.47

The APA/URO Timing Belt Tensioner is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment it replaces.

Product Features:

OE-Equivalent and a direct fit application
High quality sealed precision bearing assembly
OE specified pulley
Durable long life performance

from

$28.44

The ContiTech Timing Belt meets or exceeds the manufacturer s specifications for durability, fit and quality. The ContiTech Synchrobelt timing belt is resistant to high temperatures, oil resistant, provides low noise and reliable operation.

Product Features:

OE-Equivalent and a direct fit application.
Precision molded teeth.
Low noise operation.
Resistant to high temperatures.

from

$72.99

Demanded by today’s OEMs and manufactured to meet critical fit, form and function requirements, Dayco timing belt kits ensure parts accuracy, time savings and long-lasting performance. This kit is designed for the replacement of worn or damaged original equipment timing belts, tensioners and idler pulleys – each matched to a specific vehicle make and model.

Product Features:

Engineered for both domestic and import vehicle applications with a timing belt
All components needed for a complete timing belt replacement included in one box
Includes premium Dayco components and tough, wear-resistant belt

from

$38.99

Manufactured to meet critical OE quality fit, form and function requirements demanded by today’s vehicle manufacturers, Dayco’s timing component kit ensures long lasting peak performance. This kit is designed to replace worn or damaged original equipment timing belts, tensioners and idler pulleys. It includes pre-packaged tensioners, idler pulleys and instructions – each matched to a specific make, model and vehicle year.

Product Features:

Engineered for the majority of domestic and import vehicle applications with a timing belt
All components needed for a complete timing belt replacement included in one box
Includes premium Dayco components and a tough, wear-resistant belt
Meets or exceeds OE quality

from

$156.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial Econo-Kool« engine oil cooler kit
Imperial Econo-Kool® engine oil cooler kit
Lightweight construction with high-efficiency turbulators
Light-duty applications
All except Chevrolet V8 applications
Size: 3/4 in. x 7-1/2 in. x 12-1/2 in.

from

$40.91

Intercooler Hose

from

$27.99

Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:

100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
Brass sensor housing precision machined to meet or exceed OE thermal conductivity
OE precision matched thermistor position for correct output parameters
Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.

from

$25.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$33.49

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$8.29

Our uniquely designed pilot seal expansion plugs ensure a leak-proof fit.

Product Features:

Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$115.99

This direct replacement harmonic balancer features a stress-resistant rubber bond to properly absorb engine vibration. Stringent standards help ensure excellent tensile and impact strength for greater durability.

Product Features:

Ideal replacement – this harmonic balancer assembly exactly matches the fit and function of the original harmonic balancer for a direct replacement.
Durable construction – stringent specifications and careful construction help ensure longevity.
Thoroughly tested – this harmonic balancer has undergone dimensional verification, material validation and functional testing
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$50.99

Carquest Premium water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, hub, bearings, gaskets and seals are designed for long-lasting service life. These water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:

100% tested for reliable performance
Durable housing features precisely machined mounting surface for proper sealing and fitment
Equipped with weep chamber or similar feature to help prevent unnecessary replacement
Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
All gaskets or seals necessary for water pump are included
This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
This pump is driven by the timing chain; see vehicle manufacturer recommendation for replacement of timing components
This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components

from

$18.99

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$12.49

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$3.99

Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$44.78

Premium-quality materials such as FPM, ACM and PTFE for superior operational reliability
Various designs specifically adapted to the area of application ensure excellent functionality and performance
High-performance FPM guarantees optimum leak tightness

from

$15.29

Built to meet or exceed the standards of original equipment manufacturers around the world and avoid comebacks Victor Reinz oil pan gaskets deliver the seal that prevents drops on the driveway. Victor Reinz engineers select the best designs and materials for the specific application. The level of sophistication in oil pan gasket form and function has jumped greatly in recent years, with the gasket often being an integral part of the manufacturers efforts to control engine noise, vibration, and harshness (NVH). Only a company with innovative gasket technology can supply the right gasket for every application, new or old.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$50.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to VOLVO 85-90;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1985-1990
Weight approx: 2 Lbs
PART GROUP: 9047, 9062

Looking for the best Volvo 745 aftermarket replacement parts? Replacing worn and broken parts on your Volvo 745? Check out our online catalog to find the best selection of aftermarket Volvo 745 parts as well as real user reviews on Volvo 745 replacement parts. Make an informed decision about every component you add to your 745.

At Advance Auto, we’ve got you covered when it comes to getting your Volvo 745 in tip top condition. We’ve got over 812 Volvo 745 parts to choose from in popular categories like Body Parts, Transmission Parts and Clutch Systems. If you’re looking for the best prices, try searching our Volvo 745 parts catalog to compare OEM and aftermarket parts for your Volvo 745.

Whether you need Volvo 745 body parts, interior components, or custom Volvo 745 parts you can find them online at Advance Auto. Want to order your Automotive Accessories online? Or maybe you need your Volvo Engine Parts same day? No problem, you can pick up 745 parts in person at locations across the country, or have them delivered to straight to your door after ordering online. Finding a great deal on new and used Volvo 745 parts has never been easier.

Advance Auto customers frequently search for the following types of Volvo 745 auto parts. Check out customer reviews and ratings, and compare prices on the following Volvo 745 parts:

People also search Advance Auto for these popular years of the Volvo 745:

Volvo 745 Parts

Auto Ventshade (AVS) – Windflector – Classic, Window, Fits Up To 34.25" Wide Sunroofs, Smoke, Outside Mount, 1 Pc (Part No.77002)

StrongArm – Tailgate Lift Support: 21.5" Ext Length, 8.75" Travel, 81 Lbs of Force, 1 Pk (Part No.C4220)

Atlas Lift – Lift Support (Part No.LS10094)

KAI – Exterior Door Handle (Part No.VO1310101)

Professional Parts Sweden – Trim Fastener (Part No.O6072432780PPS)

National – Taper Bearing Cone (Part No.LM501349)

Driveworks – Oil Seal (Part No.S-223830)

Corteco – Crankshaft Seal (Part No.A806031562CFW)

National – Multi Purpose Seal (Part No.710714)

National – Multi Purpose Seal (Part No.1108)

Imperial – Econo-Kool® Transmission Oil Cooler (Part No.242009)

Permatex – Ultra Grey RTV Gasket Maker (9.5 oz.) (Part No.85084)

National – Multi Purpose Seal (Part No.222820)

National – Multi Purpose Seal (Part No.1172)

National – Multi Purpose Seal (Part No.710677)

Anchor – Transmission Mount: Rear, 1 Piece (Part No.2428)

Felpro – Transmission Oil Pan Gasket (Part No.TOS 18646)

Felpro – Automatic Transmission Extension Housing Gasket (Part No.TOS 18754)

National – Redi-Sleeve (Part No.99204)

Driveworks – Oil Seal (Part No.S-3459)

National – Multi Purpose Seal (Part No.3459)

Carquest – Air Charge Temperature Sensor Connector (Part No.28419A)

Carquest Premium – Back Up Light Switch (Part No.SBA4686)

National – Multi Purpose Seal (Part No.710780)

National – Multi Purpose Seal (Part No.224010)

FAG US – SHAFT SEAL (Part No.SS2627)

National – Bearings (Part No.A-14)

Driveworks – Taper Bearing Set (Part No.S-A-16)

Driveworks – Taper Bearing Set (Part No.S-A14)

Dorman – Clutch Pilot Bearing (Part No.690-049.1)

Dorman – Help – Clutch Pilot Bearing (Part No.14672)

Sachs – Clutch Release Bearing (Part No.I202026920SAC)

ATP – Clutch Cable (Part No.Y-461)

Covercraft – Custom Fit Car Covers Sunbrella Toast (Part No.C9282D6)

Covercraft – Custom Fit Car Covers Sunbrella Pacific Blue (Part No.C9282D1)

Covercraft – Custom Fit Car Covers Polycotton Gray (Part No.C9282PD)

Covercraft – Custom Fit Car Covers WeatherShield HD Gray (Part No.C9282HG)

Covercraft – Custom Fit Car Cover Flannel Tan (Part No.C9282TF)

Covercraft – Custom Fit Car Covers Sunbrella Gray (Part No.C9282D4)

Auto Ventshade (AVS) – Windflector – Classic, Window, Fits Up To 38.5" Wide Sunroofs, Smoke, Outside Mount, 1 Pc (Part No.77004)

Auto Ventshade (AVS) – Windflector – Classic, Window, Fits Up To 35.5" Wide Sunroofs, Smoke, Outside Mount, 1 Pc (Part No.77003)

Auto Ventshade (AVS) – Windflector – Classic, Window, Fits Up To 41.5" Wide Sunroofs, Smoke, Outside Mount, 1 Pc (Part No.77005)

Auto Ventshade (AVS) – Windflector – Pop-Out, Window, Fits Up To 32.5" Wide Sunroofs, Smoke, Outside Mount, 1 Pc (Part No.78060)

Auto Ventshade (AVS) – Windflector – Classic, Window, Fits Up To 33.0" Wide Sunroofs, Smoke, Outside Mount, 1 Pc (Part No.77001)

Kat’s – Freeze Plug Heater (Part No.11420)

Kat’s – Lower Radiator Hose Heater (Part No.16500)

Kat’s – Circulation Tank Heater; Thermostatically Controlled (Part No.13080)

Kat’s – Freeze Plug Heater (Part No.11401)

Kat’s – Circulation Tank Heater; Thermostatically Controlled (Part No.13100)

Kat’s – Lower Radiator Hose Heater (Part No.16600)

Kat’s – Freeze Plug Heater (Part No.11450)

Dorman – Steel Cup Expansion Plug 36.5mm, Height 0.410 (sold by each) (Part No.555-103)

Sealed Power – Assembly Lubricant (Part No.55-400)

Melling – Stock Replacement OE Type Oil Pump and Screen (Part No.M181)

Elring – Valve Stem Seal (Part No.A80701608701ELR)

TRW – Camshaft Follower (Part No.A4010322892TRW)

Felpro – CYLINDER HEAD BOLT SET (Part No.ES 72599)

APA/URO Parts – Turbo Hose (Part No.B4010230496APA)

APA/URO – APA/URO Timing Belt Tensioner (Part No.A5030332334APA)

ContiTech – Premium Timing Belt (Part No.A500050428CON)

Dayco – Timing Belt Kit; With Belt, Camshaft Belt Tensioner, 2 Piece Set (Part No.95032K1)

Dayco – Timing Component Kit; Camshaft Belt Tensioner Only, 1 Piece Set (Part No.84021)

Imperial – Econo-Kool® Engine Oil Cooler (Part No.240459)

MTC – Intercooler Hose (Part No.B404175160MTC)

Carquest Premium – Coolant Temperature Sensor with Thread Sealant and Washer (Part No.WTC1057)

Felpro – Engine Valve Cover Gasket Set (Part No.VS 50037 F)

National – Multi Purpose Seal (Part No.716102)

Dorman – Rubber Expansion Plug 3/4 In. – Size Range 3/4 In. – 7/8 In. (Part No.02608)

Dorman – Harmonic Balancer Assembly (Part No.594-032)

Carquest Premium – Auxiliary Water Pump: New, Mounting Gasket Included (Part No.T1079)

National – Multi Purpose Seal (Part No.710190)

Carquest Premium – ABS Wheel Speed Sensor Connector (Part No.ABA3461)

Dorman – Rubber Expansion Plug 1-3/8 In. – Size Range 1-3/8 In. – 1-1/2 In. (sold by each) (Part No.570-008)

Elring – Crankshaft Seal (Part No.A806038111ELR)

Victor Reinz – Engine Oil Pan Gasket (Part No.71-12884-20)

Anchor – Engine Mount: Front Right, 1 Piece (Part No.9062)