Volkswagen Fox Belts and Hoses

Essential Volkswagen Fox Belts and Hoses

Gates – Vulco-Flex« II Flexible Coolant Hose (Part No.25252)

Vulco-Flex« II Flexible Coolant Hose

from

$21.79
Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.

Product Features:
  • Improved sealing surface for greater leak resistance
  • High flexibility for easy installation
  • Maximum vehicle coverage with minimum inventory
  • Resistant to heat, oil and ozone
  • Rated for SAE 20R5 Class D-2 performance
  • Temperature Range: up to +257 Deg. F (+125 Deg. C)
  • Note: Gates recommends replacing clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Meyle – Cooling Hose (Part No.G202112763MEY)

Cooling Hose

from

$12.85
Only highest-grade components are used on MEYLE cooling hoses to guarantee exceptionally long product life.

Product Features:
  • Hose is 20% thicker than its OE equivalent and crafted with expert workmanship.
  • Original Norma connector provides for excellent sealing.
  • Made of extremely robust Kevlar fabric.
  • Excellent temperature resistance.
  • Smooth, anti-soiling surface repellent to dust, oil and rust.
See More

Imperial – 1/2" x 12′ Engine Oil Cooler Hose (Part No.240112)

1/2" x 12' Engine Oil Cooler Hose

from

$48.49
1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.

Product Features:
  • Engine oil cooler hose
  • Size: 1/2″ x 12′
  • Designed for engine oil applications
  • 12′ hose length accommodates most applications
See More

Imperial – Metal Line Kit for Engine Oil Coolers (Part No.240293)

Metal Line Kit for Engine Oil Coolers

from

$87.99
Metal line kit for engine oil coolers. Routes oil lines past exhaust manifolds.

Product Features:
  • Metal line kit
  • For use in engine oil cooler applications
  • Routes oil lines past exhaust manifolds
  • Provides protection where standard hoses can fail
See More

CRP – CRP, Windshield Washer Hose, 5 Meters (Part No.P714036086AFT)

CRP, Windshield Washer Hose, 5 Meters

from

$13.65
CRP, Windshield Washer Hose, 5 Meters

Dayco – Flex Radiator Hoses; EPDM Rubber, 23 Inch Long, 1.25 Inch Inner Dia. (Part No.81071)

Flex Radiator Hoses; EPDM Rubber, 23 Inch Long, 1.25 Inch Inner Dia.

from

$19.49
The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent splitting, ballooning and elongation as well as resist ozone and other detrimental environmental elements, coolants and temperature variations of -40øF (-40øC) to +257øF (+125øC). With corrugations that provide excellent hose flexibility without flattening or collapsing, the Dayco flex radiator hose also features a helical steel coil spring for increased flexibility.

Product Features:
  • Designed to meet OE specifications
  • Not suitable for oil or heat transfer
  • Meets SAE J20R4, Class D-2 requirements for improved service hoses
  • This hose is designed to prevent splitting, ballooning, and elongation
See More

Dayco – Flex Radiator Hoses; EPDM Rubber, 14.75 Inch Long, 1.25 Inch Inner Dia. (Part No.81041)

Flex Radiator Hoses; EPDM Rubber, 14.75 Inch Long, 1.25 Inch Inner Dia.

from

$14.99
The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent splitting, ballooning and elongation as well as resist ozone and other detrimental environmental elements, coolants and temperature variations of -40øF (-40øC) to +257øF (+125øC). With corrugations that provide excellent hose flexibility without flattening or collapsing, the Dayco flex radiator hose also features a helical steel coil spring for increased flexibility.

Product Features:
  • Designed to meet OE specifications
  • Not suitable for oil or heat transfer
  • Meets SAE J20R4, Class D-2 requirements for improved service hoses
  • This hose is designed to prevent splitting, ballooning, and elongation
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12.50" Long, .97" Diameter (Part No.C71221)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12.50" Long, .97" Diameter

from

$10.79
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Rein – Water Hose (Part No.CHE0242R)

Water Hose

from

$11.49
Rein Automotive OE quality coolant hoses fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for OE hoses and hose assemblies, Rein hoses are identical to the OEM, from the size and shape of their branches to the thermoplastic quick connect fittings.

Product Features:
  • Reduces installation time.
  • No cutting, refitting or adjusting the hose.
  • Prevents leaks and comebacks from reusing old quick connectors and o-rings.
  • Resistant to heat, salt, road debris, oil and other contaminants.
See More

Dayco – Curved Radiator Hose (Part No.B71408)

Curved Radiator Hose

from

$9.99
Dayco Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Product Features:
  • Made with synthetic EPDM rubber compounds that provide resistance to deterioration from ozone, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C)
  • The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose
  • Meets SAE J20R4, Class D-1 requirements for improved service hose
  • Meets Type EC electro-chemical requirements as specified in SAE J1684; which eliminates premature deterioration of the inner tube caused by the build up of static electric charges
See More

Dayco – Bottom Cog V-Belt; 32.5 Inch Long, Exact Fit Premium Quality (Part No.17325)

Bottom Cog V-Belt; 32.5 Inch Long, Exact Fit Premium Quality

from

$14.99
Dayco’s high performance HD V-belt is one of the most innovative, top performing belts for its application. By combining raw-edge construction with a specially formulated polyester cord treatment, it offers excellent resistance to repeated flexing and protection against heat, oil and grease as well as the strength, stability and reliability required for vehicles that still need a heavy-duty V-belt.

Product Features:
  • Designed for efficient power transmission to vehicle accessories in today’s trucks and buses
  • Provides greater durability and flexibility – 35% stronger than all previous versions
  • Features specially treated cords for added strength, stability and reliability
  • Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds
See More

Bando – Precision Engineered V-Belt (Part No.W100046454BAN)

Precision Engineered V-Belt

from

$18.20
Bando has been manufacturing rubber products for over 100 years. Bando is the OEM supplier to over 80 percent of the top 10 cars sold in the U.S. (by volume). Bando belts are made with EPDM rubber which adheres to OEM specification that is more heat resistant and long lasting. With 19 plants worldwide, Bando are the 3rd largest manufacturer of automotive drive belts in the world. Bando’s automotive belts, serpentine, timing and V-belts are engineered to meet the unique requirements of today’s high performance engines for applications that run the gamut from international racing teams to light duty trucks. Bando manufactures belts for the world’s leading automakers, supplying both OEM and aftermarket applications, all to the same exacting standards of quality.

Product Features:
  • Designed to provide the positive no-slip drive requirements needed on demanding overhead cam applications
  • Precision molded teeth are protected by durable fabric facing for long life
  • Tensile cord is engineered and tested for maximum load carrying capabilities
  • Rubber backing resists abrasion, oil and heat
See More

ContiTech – Drive V-Belt (Part No.W100031715CON)

Drive V-Belt

from

$20.29
All ContiTech V-Belts are quiet, OE-quality and virtually service free. The only time these belts require attention is during installation. Designed to be oil-resistant and temperature-stable from -22F to 176F (30C to 80C), ContiTech V-Belts are open-flanked, toothed, and shaped for greater traction and torque. High performance construction features include a synthetic fiber fabric cover, a special polyester cord designed to permit tightly controlled shrink, plus a polychloroprene rubber body, integrally molded cogs, and raw edges.

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
  • Polyester fiber tensile members and a ribbed belt design.
See More

Dayco – Bottom Cog V-Belt; 37.5 Inch Long, Exact Fit Premium Quality (Part No.15375)

Bottom Cog V-Belt; 37.5 Inch Long, Exact Fit Premium Quality

from

$16.29
Dayco has combined raw-edge construction and a smooth top to ensure high performance on vehicles and drives that utilize V-belts. The Dayco high performance V-belt delivers more flexibility and increases airflow around the belt so it runs cooler and lasts longer. Three plies of neoprene impregnated fabric resist heat, oil and grease while a specially-formulated treatment of the polyester cord provides the strength, stability and reliability that are required for one of the most innovative, top-performing V-belts.

Product Features:
  •  Provides greater durability and flexibility – 35% stronger than all previous versions
  • Prevents electromechanical interference issues on modern vehicles
  •  Resists heat, oil and grease
See More

Driveworks – Automotive V-Belt (Part No.32517)

Automotive V-Belt

from

$5.29
The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:
  • This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
  • Polyester cords provide extreme tension-holding capability for longer belt life
  • The raw edge belt design delivers the maximum gripping power
  • The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration
See More

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 6 Inch Length (Part No.80400)

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 6 Inch Length

from

$18.29
Providing reliable service in applications requiring molded hoses, the Dayco heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • Meets Type EC electro-chemical requirements as specified in SAE J1684
See More

Gates – Premium Molded Coolant Hose (Part No.20338)

Premium Molded Coolant Hose

from

$9.79
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
  • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

CRP – Fuel Hose (Part No.E5000859948CRP)

Fuel Hose

from

$125.06
Fuel Hose

CRP – HOSE – FUEL (Part No.4L30010814CRP)

HOSE - FUEL

from

$355.90
HOSE – FUEL

CRP – HOSE – FUEL (Part No.4L30010807CRP)

HOSE - FUEL

from

$466.04
HOSE – FUEL

CRP – Hose – Fuel (Part No.4L30010817CRP)

Hose - Fuel

from

$408.17
Hose – Fuel

CRP – Hose – Fuel (Part No.4L30010819CRP)

Hose - Fuel

from

$93.78
Hose – Fuel

Helping You Find the Right Belts and Hoses for Your Volkswagen Fox

You love your Fox. So we’ve made it easier than ever to help you find Volkswagen Fox Belts and Hoses in our online catalog. Our inventory holds 28 aftermarket and OEM Belts and Hoses for your Volkswagen Fox, ranging from $5.19 to $466.04.

We offer parts from 10 brands trusted to make quality Belts and Hoses for your Volkswagen Fox. Before you buy, take some time to read through customer reviews. We currently have 675 reviews of Volkswagen Fox Belts and Hoses from previous customers. Some of the top rated parts include Automotive V-Belt with 1.5 stars and Automotive V-Belt with 4.0 stars.

Find your Fox Belts and Hoses here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Volkswagen Fox part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Belts and Hoses Brands for Your Volkswagen Fox

Our inventory holds Belts and Hoses for your Volkswagen Fox from 10 trusted brands. You’ll find OEM and aftermarket parts from brands like Dayco, Imperial, and Rein, all of which can keep that Volkswagen happy.

FAQs for Volkswagen Fox Belts and Hoses

What are the most purchased Belts and Hoses for the Volkswagen Fox?

Out of 28 Belts and Hoses for the Volkswagen Fox, the most popular in our inventory are:
Bottom Cog V-Belt; 37.5 Inch Long, Exact Fit Premium Quality
from $16.29
This product is not rated
Bottom Cog V-Belt; 37.5 Inch Long, Exact Fit Premium Quality
V-Belts
1/2" x 12' Engine Oil Cooler Hose
from $48.49
This product is not rated
1/2" x 12′ Engine Oil Cooler Hose
Engine Oil Cooler Hoses
Metal Line Kit for Engine Oil Coolers
from $87.99
This product is not rated
Metal Line Kit for Engine Oil Coolers
Engine Oil Cooler Hoses

What are the top-rated Volkswagen Fox Belts and Hoses?

Top-rated Belts and Hoses for your Volkswagen Fox based on customer reviews/ratings are:
Automotive V-Belt
from $5.19
(2)
Automotive V-Belt
“Does the job but for some reason these belt always squeak when I use them. I should have stayed with a goodyear belt”
Automotive V-Belt
from $5.29
(1)
Automotive V-Belt
“Matched the exact size of the belt it replaced.”