Toyota Tacoma Air Suspension and Kits

The Air Command Standard Duty Dual Electric Air Compressor System Kit Allows You To Adjust Your Air Springs With The Touch Of A Button. It Offers A Built in Air Source For Your Suspension System, Making It Easy To Alter Your Springs To Align With The Load Type And Environment. When Shopping For Air Accessories, You will Find That Firestone Air Command Standard Duty Dual Electric Air Compressor System Kit Is Designed To Have A Couple Of Special Benefits. First, The Air Command Standard Duty Dual Electric Air Compressor System Kit Comes Ready To Install, So You Can Set It Up And Get Back To The Road where You Want To Be. Just Connect A Few Wires To The Compressor And A Few To Your Vehicle. The Air Lines And Wiring Harness Can Be Plugged Into The Same Side Of The Unit For Smoother Routing Of Lines And Power Supply. After The Air Command Standard Duty Dual Electric Air Compressor System Kit Is Properly Installed, You Can Make Pressure Adjustments By Pressing A Single Button. This Air Command Standard Duty Dual Electric Air Compressor System Kit Component Allows For Side To Side Or Front to rear Leveling, Real time Pressure Readout, And Dual Left And Right PSI And Pressure Control Readouts. The Air Command Standard Duty Dual Electric Air Compressor System Kit Easy to read Needle Gauge Can Be Viewed Day Or Night, Without Straining Or Squinting Your Eyes. Prior To Installing The Air Command Standard Duty Dual Electric Air Compressor System Kit, Review The Instructions And Identify All Of The Components To Help Make Sure You Get Maximum Performance From Both Your Air Springs And Air Command Standard Duty Dual Electric Air Compressor System Kit. The Installation Steps Are Different Depending On Whether You are Enhancing An Existing Air Helper Spring System With The Air Command Standard Duty Dual Electric Air Compressor System Kit Or Installing It With A New Air Spring System.

Product Features:

• Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
• Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Dual Point Fill (Both Air Springs Fill Independently Of Each Other)
• Light Duty Compressor Specs (120 PSI Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)

Shock Kit

aFe Control introduces these Sway-A-Way High Performance replacement shock absorbers for the 2005-2020 Toyota Tacoma.. These 2.0″ diameter shocks feature all the same race winning engineering and components that have 20+ years of testing into a specifically designed kit that will bolt directly into your daily driven vehicle. This kit offers adjustable ride height and better off road damping curves without sacrificing any on road comfort or handling. These rear shocks are 100% designed and built in the USA that feature bright zinc plated steel cylinder bodies and CNC machined aluminum components. This package is designed as a direct fit application and requires no modifications to the vehicle.

Product Features:

• CNC Machined Components Made To The Strictest Tolerances
• Polished Nitro Steel Shaft for Strength And Durability
• Teflon Lined Steel Spherical Bearings
• Multi-Seal Carrier To Ensure Zero Leakage

Product Features:

• ORDERING INFO: Box 3 of 3 for master kit RS66905R9; must order RS66905R9-1, RS66905R9-2 and RS66905R9-3 for a complete kit
• COMPATIBILITY: Designed for Toyota Tacoma trucks (excluding TRD PRO and 5 lug)
• LIFTS AND LEVELS VEHICLE: Fits 285/70R17 tires, system lifts front by 2.5-in. while rear blocks raise the back an additional 1.5-in. to level the truck (trimming required for 285/70R17 tires, tire size varies between manufacturers)
• COMPLETE SOLUTION: Includes Rancho RS9000XL struts and rear shocks, upper control arms with ball joints, rear block kit, U-bolts and mounting hardware
• NINE LEVELS OF ADJUSTMENT: Rancho RS9000XL shocks and struts feature nine-position knob for customized damping control and firmness for on-road and off-road flexibility
• BUILT TO PERFORM: Control arms keep the preinstalled ball joints in their normal operating range, provide additional caster to aid in alignment and add wheel travel
• ENGINEERED TO LAST: Brackets fabricated from high-strength, low-alloy steel for long life while control arms feature durable OE-style rubber bushings and ball joints for easy maintenance and quiet operation
• EASY TO INSTALL: Bolt-on installation for an easy upgrade
• NOTES: Maintains OE alignment specs and won’t affect electronic stability system, allows the use of OE wheels/tires; must use OE springs and top mounting components; aftermarket bumpers, winches, etc. affect height
• BUY WITH CONFIDENCE: Comes with Rancho’s limited warranty

KYB Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Strut Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB Strut Mounts and bearing plates have a reputation for providing the highest quality in the industry.

Product Features:

• The Highest Quality Replacement Strut Mount Available
• Optimizes Suspension Performance By Offering Original Equipment Quality Replacement Components Designed For Each Application
• Superior Rubber Reduces Noise, Vibration And Harshness
• Mount Bearings Provide Smoother Steering And Help Retain Front End Alignment
• Matched Grade Studs And Nuts

Every new strut deserves a Monroe Strut-Mate Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.

Product Features:

• PERFECT PAIRING – Ideal match for the ride control characteristics of Monroe struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
• REDUCES NOISE AND VIBRATION – Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
• REPLACES OE – Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
• RIGOROUS TESTING – Fit checked and ride tested for quality you can count on
• EASY TO INSTALL – Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily

Every new strut deserves a Monroe Strut-Mate Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.

Product Features:

• PERFECT PAIRING – Ideal match for the ride control characteristics of Monroe struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
• REDUCES NOISE AND VIBRATION – Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
• REPLACES OE – Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
• RIGOROUS TESTING – Fit checked and ride tested for quality you can count on
• EASY TO INSTALL – Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily

Product Features:

• COMPATIBILITY: Designed for Toyota Tacoma trucks and 4Runner SUVs
• LEVELED STANCE: Reduces factory rake and levels out truck’s stance by 2.25-in. (aftermarket bumpers, winches, etc. affect lift height)
• COMPLETE SOLUTION: Kit includes two sway bar spacers, two Rancho RS9000XL struts (coil springs not included) and mounting hardware to accommodate tires up to 33-in. (must use OE springs and top mounting components)
• DELIVERS SUPERIOR PERFORMANCE: Rancho RS9000XL struts with nine-position damping control for superior on-road comfort and off-road performance
• ENHANCED CONTROL: Sway bar spacers correct end link angles for roll and sway control
• EASY TO INSTALL: Bolt-on installation for an easy upgrade
• COMPLETE PERFORMANCE UPGRADE FOR TACOMA– Transform your suspension with Rancho RS9000XL rear shocks (RS999319), performance upper control arms (RS64901) and rear block kit (RS70901); all sold separately
• COMPLETE PERFORMANCE UPGRADE FOR 4RUNNER: Transform your suspension with Rancho RS9000XL rear shocks (RS999305), performance upper control arms (RS64903) and rear block kit (RS70080); all sold separately
• NOTES: Allows the use of OE wheels/tires; must use OE springs and top mounting components; trimming required for 33-in. wheel/tire (tire size varies between manufacturers)
• BUY WITH CONFIDENCE: Comes with Rancho’s limited warranty

Product Features:

• ORDERING INFO: Box 2 of 3 for master kit RS66905R9; must order RS66905R9-1, RS66905R9-2 and RS66905R9-3 for a complete kit
• COMPATIBILITY: Designed for Toyota Tacoma trucks (excluding TRD PRO and 5 lug)
• LIFTS AND LEVELS VEHICLE: Fits 285/70R17 tires, system lifts front by 2.5-in. while rear blocks raise the back an additional 1.5-in. to level the truck (trimming required for 285/70R17 tires, tire size varies between manufacturers)
• COMPLETE SOLUTION: Includes Rancho RS9000XL struts and rear shocks, upper control arms with ball joints, rear block kit, U-bolts and mounting hardware
• NINE LEVELS OF ADJUSTMENT: Rancho RS9000XL shocks and struts feature nine-position knob for customized damping control and firmness for on-road and off-road flexibility
• BUILT TO PERFORM: Control arms keep the preinstalled ball joints in their normal operating range, provide additional caster to aid in alignment and add wheel travel
• ENGINEERED TO LAST: Brackets fabricated from high-strength, low-alloy steel for long life while control arms feature durable OE-style rubber bushings and ball joints for easy maintenance and quiet operation
• EASY TO INSTALL: Bolt-on installation for an easy upgrade
• NOTES: Maintains OE alignment specs and won’t affect electronic stability system, allows the use of OE wheels/tires; must use OE springs and top mounting components; aftermarket bumpers, winches, etc. affect height
• BUY WITH CONFIDENCE: Comes with Rancho’s limited warranty

The LoadLifter 5000(TM) air suspension kits fit many 1/2, 3/4, and 1-ton pickups and vans to haul the big stuff. Perfect for commercial trucks, wreckers, ambulances, construction and utility trucks. Our air springs beef up your existing suspension to boost your safety and comfort when hauling massive loads.

Product Features:

• Up To 5,000 Pound Of Load-Leveling Capacity
• Air Springs Fully Adjustable From 5 To 100 Pounds Per Square Inch For Precise Control
• Levels Your Vehicle When Towing Or Hauling For A Safe, Comfortable Ride
• Eliminates Sag And Bottoming Out
• No Frame Drilling Required
• Easy To Install

Product Features:

• Incredible Improvement in Control
• Maintains Proper Caster and Camber Alignment
• Increase in Handling and Control
• Greatly Reduce Wheel Hop on Quick Acceleration
• Even Braking Control is Improved
• Better Suspension Stability

Product Features:

• Incredible Improvement in Control
• Maintains Proper Caster and Camber Alignment
• Increase in Handling and Control
• Greatly Reduce Wheel Hop on Quick Acceleration
• Even Braking Control is Improved
• Better Suspension Stability

Product Features:

• Incredible Improvement in Control
• Maintains Proper Caster and Camber Alignment
• Increase in Handling and Control
• Greatly Reduce Wheel Hop on Quick Acceleration
• Even Braking Control is Improved
• Better Suspension Stability

The yaw rate sensor is part of the stability control system which works in conjunction with the anti-lock brake system. The sensor measures the lateral movement of the vehicle, should the vehicle begin to move in a sideways direction, the anti-lock brake system will operate the brake system in a manner which may avoid a loss of vehicle control.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
• Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
• Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
• Where applicable electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

Valvoline DEX/MERC ATF is a high-quality transmission fluid formulated to meet the challenging demands many automatic transmissions. Its responsive low-temperature fluidity is beneficial in both electronic and hydraulic controlled transmissions and transaxles. Recommended for use in the following applications: MERCON®, DEXRON®-III, Ford M2C138-CJ and M2C166-H, Allison C-4 and TES-389, and Caterpillar TO-2.

Product Features:

• Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
• Enhanced anti-shudder protection for smooth shifting and maximum power transfer
• Developed with anti-wear technology to help improve transmission durability
• Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

Max Performance Synthetic Power Steering Fluid

Valvoline ATF for MERCON V Applications is a high-quality transmission fluid meeting and exceeding the requirements of the Ford Mercon V specification which covers most Ford passenger cars and light-duty trucks (except those specifying MERCON SP, MERCON LV, MERCON ULV or Type F fluids), including Lincoln and Mercury, as well as most pre-2006 GM vehicles and many imports. Recommended for use in the following applications: MERCON V, MERCON, DEXRON-III, DEXRON-II, Caterpillar TO-2, Allison C-4. Other applications include Power steering fluid where a DEXRON or MERCON fluid is recommended. Suitable to use in Nissan Matic D, Matic J and Matic K.

Product Features:

• Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
• Enhanced anti-shudder protection for smooth shifting and maximum power transfer
• Developed with anti-wear technology to help improve transmission durability
• Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

Quick Strut Kit

Quick Strut Kit

Designed to provide inflation control of your air helper springs. This kit will be an asset to your vehicle, meeting nearly all of your air supply needs.

Product Features:

• Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
• Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Dual Point Fill (Both Air Springs Fill Independently Of Each Other)

Our Air Command systems give customers the ability to conveniently adjust their air springs with the touch of a button thanks to our Air Command Air Compressor Kits. Our designs provide an instant air source to a vehicle air suspension system, giving users the freedom to adjust their air springs to accommodate different loads and road conditions from both inside and outside of the vehicle.

Product Features:

• The Easy To Read Digital Display Is Designed So You Can See It During The Day, But It Does Not Blind You At Night
• The Wireless Remote Utilizes A New Sleep Cycle And LED Display That Reduces Energy Use And Improves Battery Life
• Easy Installation