Toyota Tacoma Automotive Accessories

Beat the elements and add some attitude to your Truck, Van or SUV. Sidewind Deflectors allow you to keep your windows partially open, to provide ventilation to the interior. Today’s modern aerodynamic body styles with form fitting doors and windows no longer feature “rain gutters” to channel away water. The result is usually water dripping into the interior. Sidewinds act like a “drip-edge” for your vehicle, this allows you to keep your window partially open for ventilation, without the rain getting in. As air flows around the outside edge of the sidewind it creates a small low pressure area underneath it (much like an airplane wing) which creates suction to keep out the wind and draw out the stale air from inside your vehicle.

Product Features:

• Securely mounts above the window on the door
• Precision engineered for a perfect fit to your vehicle
• Available in impact-resistant acrylic with a smoke finish
• Made in USA
• Car-wash safe

You can never have enough rugged storage. Whether you are storing tools, hauling game day gear, or coming up with literally hundreds of other uses- Dee Zee universal poly plastic chest is like the Swiss Army Knife of utility chests. Constructed of strong yet lightweight plastic with a double wall lid, our universal utility chest can handle all the abuse you can throw at it. We have designed our utility chest to add quick, convenient storage for all sorts of applications. Available in two sizes to suit your needs. We even provided molded drink holders in case you decide to use it on the go and get a little thirsty. Do not worry if the weather does not cooperate, a foam gasket around the lid helps defend your items against the elements.

Product Features:

• Classic Raised Brite Tread Pattern
• Convenient Molded Cup Holders
• Molded Locking Tabs
• Double Walled Lid
• Double Wall Lid For Extra Support Classic Brite-Tread Pattern
• Classic Brite-Tread Pattern
• Made In USA

Freeze Plug Heater, also referred to as a block heater or frost plug heater is the most reliable and efficient way to pre-heat your engine. Operates by being directly submerged into coolant and heating the block. Requires mechanical ability to install.

Product Features:

• Saves wear and tear on your engine
• Simple installation directly into engine block

The Rightline Gear Truck Tent lets you experience camping in a dry truck bed, up off the ground, without the complication of tarps, stakes, and guy lines. It features a floorless design that allows you to set up or take down the tent without removing your gear from the bed. The tent is outfitted with (2) gear pockets, a lantern hanging hook, glow-in-the-dark zipper pulls, and a sky view vent. Measure the inside of your truck bed with the tailgate up and check the Truck Tent Sizing Guide. Turn any spot into a comfortable campsite!

Product Features:

• Floorless design allows for set up without removing gear from the bed
• Protective heavy duty straps and nylon buckles, won’t damage truck’s finish
• Color coded poles and pole pockets for quick and easy set up
• Water resistant fabric with tape sealed seams (PU 2000mm)
• Sky view vent for more light, ventilation, and sleeping under the stars
• All truck tents sleep (2) adults
• Includes: tent, rainfly, stuff sack, and sewn-in set up guide

When it comes to your truck or SUV, you want quality, style, protection, and durability at a price you can afford. TrailFX offers you an array of products, whether it is for work or play, TrailFX has something for everyone’s needs. Step bars to grille guards, tool boxes to bed protection, whatever your need, we have you covered. TrailFX sources high quality products for trucks, SUVs, and cars at a price you can afford. Whether you need a nerf step for your SUV, a tool box for your truck, or a bug shield for your car, we want to make sure that you are supplied the quality, style, and durability you expect from a product.

Product Features:

• Designed To Be Installed On All Truck Beds
• Quickly Removed For A Clean Look When Not In Use
• Adjustable Width And Height For Customized Installation
• High Quality And Durable Powder Coated Finish
• 250 Pounds Capacity
• Easy Install And Can Be Mounted On Driver Or Passenger Side
• Drilling Is Required

Dee Zee Transfer Tanks A safe and convenient means for transporting non flammable liquids. Constructed of heavy Gauge aluminum. Radius curve design eliminates key weld pressure points. Tanks feature 3 stability baffles, lockable cap, 3/8 Inch drainage plug and venting coupler. Tanks are intended for private use (non commercial).

Product Features:

• Made From Non-Rusting Brite-Tread Aluminum
• Perfect For Transporting Liquids
• Radius Curve Design Eliminates Key Welded Pressure Points
• Many Handy Styles To Fit Most Needs

Sunbrella custom fit car covers are top quality outdoor covers, specifically crafted to withstand the harshest Arizona desert sun. This heavy-duty cover withstands high heat, high temperatures, and damaging UV rays. Treated for moisture resistance in humid marine areas as well. Constructed from woven acrylic fabric that is solution-dyed for ultimate color protection. Custom cut to fit your exact vehicle. Installs easily with a tie-down cab.

Product Features:

• Best for intense sun locations
• Durable long-lasting fabric
• Solution dyed woven acrylic fabric
• Provides almost complete UV blockage

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

• Premium quality materials for longer service life
• Sealed connections (where applicable) to prevent environmental corrosion and performance issues
• Global coverage for import and/or domestic applications
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

Each Vigilante Hood Protector is precision engineered to fit your vehicle and installs easily using 3M automotive-grade adhesive. No special hardware or drilling is required! Car-wash safe, and UV and scratch-resistant, Stampede Automotive Accessories Hood Protectors are proudly made in the USA of impact-resistant acrylic in a range of finishes including smoke, chrome, American flag and genuine licensed Mossy Oak and Realtree camouflage patterns.

Product Features:

• Maximum protection to your hood to complement the look of your vehicle
• Precision engineered for a perfect fit to your vehicle
• Easy installation: no special hardware or drilling required – attaches with 3M automotive-grade adhesive
• Available in smoke, chrome, American flag and camo finishes
• UV and scratch-resistant while being car-wash safe

Cracked or wore out your key fob case? Want to add a custom look? Just replace the case with this convenient, affordable keyless entry transmitter cover, restoring or enhancing the look.

Product Features:

• Replacement or upgrade – this keyless remote case allows you to simply replace a broken case or upgrade your current look.
• Seamless fit – matches dimensions of original transmitter cover for specific vehicle applications for a tight seal
• Reliable construction – keeps moisture and debris out of internal electronics for long service life
• Trustworthy quality – backed by team of product experts and engineers in the United States, and more than a century of experience

Dee Zee Bull Bar Guard License Plate Mount. Bull bars can block the license plate on some vehicles, use this bracket to move your license plate to a visible location.

Product Features:

• License Plate Frame Mount
• Made From 2.5 Millimeter Hot Rolled Steel
• Protective Gloss Black Powder Coat Finish
• Attach A License Plate To Your Dee Zee Bull Bar
• Mounts To Underside Of The Center Tube
• Uses 6 Millimeter Threaded Inserts

This floor mat retainer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

• Direct replacement – this floor mat retainer matches the fit and function of the factory part on specified years, makes and models.
• Ideal solution – this retainer is a reliable replacement for an original part that is missing or has failed due to fatigue
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

The UVS100 Sunscreen is an affordable way to protect the interior of your vehicle from damaging UV rays as well as adding a level of comfort and protection by reducing the interior temperature of the vehicle on hot days. The sunscreen is custom-fitted so that there is maximum coverage of the windshield area and ease of installation. Sometimes called heat shields, sun shields or UV shields, sunscreens are useful at the beach, work, airport or anywhere you park. This premium quality, custom patterned folding sunscreen also features a soft felt lining on the inside to help protect your interior.

Product Features:

• Custom fit to the windshield for complete coverage
• Protect the dash and other interior components from damage by the sun
• Reduce the interior temperature of the vehicle on hot days
• The foam core center of the shield acts as an insulator
• Easy to use and store away when not in use

Sunshade is a custom fit windshield and window sun shade that protects the vehicle interior from harmful UV rays. Its clever design helps keep interior temperatures cool in the summer or flip it around and help prevent frost build-up in the winter.

Product Features:

• Dual Purpose Design Helps Keep Vehicles Cool In The Summer, And In The Winter Also Helps Warm Up Interiors And Avert Frost Build Up
• Cools In Summer, Significantly Reduces The Temperature Of The Vehicle Dashboard And Steering Wheel
• Heats In Winter Helps To Attract The Sunlight, Warm Up The Vehicle s Windshield And Interior And Avert Frost Build Up
• Effortless Storage Can Easily Be Rolled Up And Stored With The Help Of Its Hook And Loop Strap System
• Sturdy Core Features A Foam Core, Which Makes For Easy Handling And A Sturdy Fit In Vehicle Windows And Windshields
• Custom-Fit, Custom Fit For The Vehicle, And When Properly Installed, Will Remain Snug In Each Window Opening

HIGHLAND all weather floor mats offer the ultimate protection for front and rear floors. These durable, pliable floor mats will not stiffen or crack even in the harshest of weather conditions. Protect your investment and increase your resale value with these high quality floor mats.

Product Features:

• Easily installed and removed – no tools required
• Designed to fit your specific vehicle contours
• Raised ridges confines dirt and water to keep your vehicles carpet clean
• Anti-skid spikes on back of mats prevent the mat from slipping

In the quest for the most advanced concept in floor protection, the talented designers and engineers at WeatherTech have worked tirelessly to develop the most advanced floor protection available today. The WeatherTech FloorLiner accurately and completely lines the interior carpet giving absolute interior protection. The WeatherTech FloorLiner lines the interior carpet up the front, back and even up the sides of the vehicle footwell. Digital laser measurements of interior surfaces offer a consistently perfect fit. A patent pending High-Density Tri-Extruded (HDTE) material allows for a rigid core for strength while offering surface friction to the carpet, as well as tactile feel to the surface Advanced surfacing creates channels that carry fluids and debris to a lower reservoir with further channeling to help minimize fluid movement while driving Once fluids become trapped in the reservoir, away from shoes and clothing, they are easily removed from the WeatherTech FloorLiner over the door sill. No muss-no fuss.

Product Features:

• Accurately And Completely Lines The Interior Carpet Giving Absolute Interior Protection
• Lines The Interior Carpet Up The Front, Back And Even Up The Sides Of The Vehicles Footwell
• Digital Laser Measurements Of Interior Surfaces Offer A Consistently Perfect Fit
• A Patent Pending High Density Tri Extruded (HDTE) Material Allows For A Rigid Core For Strength While Offering Surface Friction To The Carpet, As Well As Tactile Feel To The Surface
• Advanced Surfacing Creates Channels That Carry Fluids And Debris To A Lower Reservoir With Further Channeling To Help Minimize Fluid Movement While Driving
• Manufactured From A Proprietary Custom Blended TPO (Thermopolyolefin) That Is Not Only Wear Resistant, But Also Remains Flexible Under Extreme Temperatures
• Available in fronts, rears, center hump, 3rd and 4th row, and complete sets
• Available in black, tan, grey and cocoa

The Rightline Gear Truck Tent lets you experience camping in a dry truck bed, up off the ground, without the complication of tarps, stakes, and guy lines. It features a floorless design that allows you to set up or take down the tent without removing your gear from the bed. The tent is outfitted with (2) gear pockets, a lantern hanging hook, glow-in-the-dark zipper pulls, and a sky view vent. Measure the inside of your truck bed with the tailgate up and check the Truck Tent Sizing Guide. Turn any spot into a comfortable campsite!

Product Features:

• Floorless design allows for set up without removing gear from the bed
• Protective heavy duty straps and nylon buckles, won’t damage truck’s finish
• Color coded poles and pole pockets for quick and easy set up
• Water resistant fabric with tape sealed seams (PU 2000mm)
• Sky view vent for more light, ventilation, and sleeping under the stars
• All truck tents sleep (2) adults
• Includes: tent, rainfly, and stuff sack with sewn-in set up guide

The name says it all – the Universal Car Remote works like a universal TV remote, but it’s made for cars. It’s designed to work with factory-installed keyless entry systems. It works exactly like a vehicle’s original factory remote, unlocking and locking doors, popping open the trunk – everything an original remote does. The Universal Car Remote has the capabilities of 216 remotes packed into a single device. It replaces factory original remotes for vehicles made by 21 car manufacturers – from Buick to Volkswagen. For the first time ever, you can replace remotes using a single device.

Product Features:

• Introducing world’s first and only universal car remote.
• The Universal Car Remote has the capabilities of 216 remotes packed into a single device
• It replaces factory original remotes for vehicles made by 21 car manufacturers – from Buick to Volkswagen
• Freshly installed battery included

Need a new keyless remote? This fob is designed to look and function exactly like your original, and you don’t need to pay for expensive programming at the car dealership. This Dorman OE FIX replacement includes a patented, DIY-friendly programming tool for simple replacement. Just plug it into the OBD II port in your dashboard, follow the included instructions, and you’re good to go. Setup takes minutes, and you can rely on your new remote for years.

Product Features:

• Vehicle-specific replacement or spare – this keyless entry transmitter looks and functions like the original fob on certain vehicle years, makes, models and configurations.
• Do-it-yourself solution – includes a patented programmer that plugs into your OBD II port to setup your new fob in minutes, without expensive dealership programming
• Matches features – this 3-button remote control features lock, unlock and panic functions
• Important notes – you must have at least one of your original keys or fobs for programming process; only for use on vehicles that came originally equipped with keyless entry

This cup holder is designed to match the fit, appearance and function of the original part on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Direct replacement – this cup holder is designed to match the fit, appearance and function of the original part on specified vehicles
• Restores functionality – this holder is made to fully restore part functionality after the original holder fails
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Beat the elements and add some attitude to your Truck, Van or SUV. Sidewind Deflectors allow you to keep your windows partially open, to provide ventilation to the interior. Today’s modern aerodynamic body styles with form fitting doors and windows no longer feature “rain gutters” to channel away water. The result is usually water dripping into the interior. Sidewinds act like a “drip-edge” for your vehicle, this allows you to keep your window partially open for ventilation, without the rain getting in. As air flows around the outside edge of the sidewind it creates a small low pressure area underneath it (much like an airplane wing) which creates suction to keep out the wind and draw out the stale air from inside your vehicle.

Product Features:

• Securely mounts above the window on the door
• Precision engineered for a perfect fit to your vehicle
• Available in impact-resistant acrylic with a smoke finish
• Made in USA
• Car-wash safe

With a curved design, the AVS Original Ventvisor® is a side window deflector that lets fresh air in while keeping rain out. It also helps to keep the sun out of your eyes, reduce interior wind noise and fogging, and reduce interior heat. Available in dark smoke or chrome finishes for the custom look you want. Easy to install for a lifetime of use! Enjoy fresh air and comfort no matter the weather from the company that started it all!

Product Features:

• Precision engineered for a custom fit on your vehicle with modern, curved design
• Easy installation with no-drilling or special hardware required
• Attaches easily with 3M automotive-grade adhesive above the window
• Made from durable, impact-resistant acrylic
• Available in dark smoke and chrome finishes

WeatherTech Side Window Deflectors, offer fresh air enjoyment with an original equipment look, installing within the window channel.  They are crafted from the finest 3 Millimeter acrylic material available. Installation is quick and easy, with no exterior tape needed. WeatherTech Side Window Deflectors are precision-machined to perfectly fit your vehicle window channel. These low profile window deflectors help to reduce wind noise and allow interior heat to escape. Our light tinted Side Window Deflectors are the only deflectors in the world made with a D.O.T. (U.S. Department of Transportation) approved glazing material. Available in light and dark tint for most vehicles.

Product Features:

• Offers Maximum Fresh Air Enjoyment
• Optically Transparent OEM Quality
• Sleek Aerodynamic Styling
• Reduced Wind Noise
• No Unsightly Exterior Tape
• Minimizes Interior Heat When Parked: Helps Keep Side Windows Dry In The Rain
• Precision Machined To Perfectly Fit Your Vehicle
• Installed Inside The Window Channel

With a curved design, the AVS Original Ventvisor® is a side window deflector that lets fresh air in while keeping rain out. It also helps to keep the sun out of your eyes, reduce interior wind noise and fogging, and reduce interior heat. Available in dark smoke or chrome finishes for the custom look you want. Easy to install for a lifetime of use! Enjoy fresh air and comfort no matter the weather from the company that started it all!

Product Features:

• Precision engineered for a custom fit on your vehicle with modern, curved design
• Easy installation with no-drilling or special hardware required
• Attaches easily with 3M automotive-grade adhesive above the window
• Made from durable, impact-resistant acrylic
• Available in dark smoke and chrome finishes

Beat the elements and add some attitude to your Truck, Van or SUV. Sidewind Deflectors allow you to keep your windows partially open, to provide ventilation to the interior. Today’s modern aerodynamic body styles with form fitting doors and windows no longer feature “rain gutters” to channel away water. The result is usually water dripping into the interior. Sidewinds act like a “drip-edge” for your vehicle, this allows you to keep your window partially open for ventilation, without the rain getting in. As air flows around the outside edge of the sidewind it creates a small low pressure area underneath it (much like an airplane wing) which creates suction to keep out the wind and draw out the stale air from inside your vehicle.

Product Features:

• Securely mounts above the window on the door
• Precision engineered for a perfect fit to your vehicle
• Available in impact-resistant acrylic with a smoke finish
• Made in USA
• Car-wash safe