Toyota Prius Parts

Please Select your Vehicle to See Exact Fit Parts

Toyota Prius Body Parts

from

$40.99

New Standard Replacement Front Bumper Lower Spoiler/Splash Shield, Black

Product Features:

Black, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$37.99

This replacement window regulator is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.

Product Features:

Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
Reliable design – engineered in the USA and backed by long history of automotive aftermarket experience
Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit

from

$48.99

Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.

Product Features:

Heavy Gauge Steel Body
Self-Cleaning Piston Assembly
Rubber O-Ring Piston Seal
Non-Stick Back-Up Ring
Hardened Nitride Plated Steel Shaft
Engineered In USA To OE Quality Standards For Performance And Durability
IATF 16949, ISO 9001 Certified; Passes Extensive Quality Checks And Testing
Easy To Install In Just Minutes. No Special Tools Required.
Exact Fit Original Equipment Design Guarantees Correct Fit And Function
Consistent Performance In All Weather Conditions
Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle

from

$159.99

LeBra Front End Covers by Covercraft are a stylish accessory specifically designed to fit your vehicle. These custom front end covers protect your ride from road damage and rock chips. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. Unexpected road damage is inevitable. The LeBra front end cover provides durable protection against small rocks and stones, insects, love bugs and road tar. Great protection, great style, it’s the easiest way to keep your vehicle protected!

Product Features:

Full front end coverage
Custom fit exactly to your vehicle
Installs easily with no drilling or tools
Leather grain vinyl
Protect against rock chips, bugs and road tar
Soft inner layer

from

$285.99

This door lock actuator has undergone extensive quality and safety testing to ensure reliable performance. It is engineered to provide a direct replacement for the stock actuator on specific vehicle years, makes and models.

Product Features:

Reliable replacement – this door lock actuator has undergone extensive quality and safety performance testing
Perfect fit – engineered to provide the same fit and function of the original actuator on specific vehicle years, makes and models
Safety compliant – part has undergone simulated crash testing under government guidelines
Long-lasting repair – cycle testing in an actual vehicle door verifies effective usage for years

from

$29.99

This hood release cable is durably built to directly replace a worn-out or broken cable on specific vehicle years, makes and models.

Product Features:

Direct replacement – this hood release cable is made to match the original cable on specific vehicles
Durable construction -manufactured within strict tolerances for reliable longevity
Cost-effective solution – comparable quality for lower cost than buying replacement at the dealership
Trustworthy value – backed by team of engineers and quality control experts in the United States

from

$14.79

Replacement Mirror Glass. K Source is a unique manufacturer in that we specialize in making only automotive and motorcycle mirrors. Our experience in this category for over 71 years is exactly what our customers have come to trust and rely upon, as our manufacturing and marketing expertise has consistently led the market in replacement products.

Product Features:

The most economical way to replace cracked Mirror glass
Glass measures 4 1/2″ tall by 6 3/4″ wide and 7 1/4″ diagonally
This glass fits Mirrors with Heated Power function only
Mounting tape included for low-hassle stick-on installation
Step-by-step instructions for easy installation

from

$13.99

New Standard Replacement Passenger Side Hood Hinge

Product Features:

Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$39.99

Want a new interior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:

Matching appearance – this replacement door handle was specifically designed to look and function the same as the original interior handle on particular vehicles
Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
Trustworthy construction – engineered in North America and backed by 100 years of automotive aftermarket experience
Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

from

$88.99

New CAPA Certified Standard Replacement Passenger Side Fender Liner, Except Plug-In

Product Features:

Except Plug-In, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$4.99

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring Length service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for Length-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$56.99

Want a new exterior door handle that matches the original, for far less than going back to the dealership- This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:

Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles
Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
Excellent value – original equipment quality at a lower price
Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

from

$179.99

Original Equipment Manufacturer Style Replacement Side View Mirror. K Source is a unique manufacturer in that we specialize in making only automotive and motorcycle mirrors. Our experience in this category for over 71 years is exactly what our customers have come to trust and rely upon, as our manufacturing and marketing expertise has consistently led the market in replacement products.

Product Features:

Driver side Mirror, tested to fit and function like the original, Meets or exceeds Original Equipment Manufacturer standards
Mirror glass is power adjustable and heated
OE-comparable wiring harness/ connection (no “pigtail” connector) for hassle-free installation
Manual folding for additional clearance
Textured Black with Paintable to match cover

from

$4.99

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$102.99

New CAPA Certified Premium Replacement Passenger Side Fender

Product Features:

Made Of Galvanized Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$7.99

New Standard Replacement Driver Side Rear Bumper Retainer, Cover

Product Features:

Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$7.99

New Standard Replacement Passenger Side Rear Bumper Retainer, Cover

Product Features:

Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$69.99

New CAPA Certified Premium Replacement Front Bumper Impact Absorber

Product Features:

Made Of Expanded Polypropylene
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$4.99

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$49.99

This door hinge is designed to match the function of an original equipment hinge on specified vehicles. It is engineered to securely connect a door and door frame to help restore proper door operation and replace a rusted, failed, or damaged hinge.

Product Features:

Direct replacement – this door hinge is designed to match the fit, function and performance of an original equipment hinge on specified vehicles
Ideal solution – engineered to securely connect a door and door frame to help restore proper door operation, and seamlessly replace a rusted, failed, or damaged hinge
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$40.99

With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New Standard Replacement Front Bumper Grille, Matte-Black. It is Designed to Replace Your Existing Bumper Cover Grille. Check to Be Sure it Fits Your Vehicle.

Product Features:

Matte-Black, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$4.99

New Standard Replacement Driver Side Front Bumper Bracket Support

Product Features:

Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$4.99

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$36.99

Coast to Coast International Simulators And Trim Rings, also known as beauty rings, come in various sizes to complement the look of your vehicle or truck. Our stainless steel simulators are available in both ABS plastic, or high quality T304 Stainless Steel. All of our simulators have a long lasting appearance made to with stand the rigors of an everyday work truck.

Product Features:

Constructed Of Durable Automotive-Grade ABS
Complements The Look Of Your Vehicle Or Truck
Designed And Manufactured For Quality Fitment And Finish
Easy To Install

from

$83.99

This replacement console lid restores the appearance and function of a worn or damaged original equipment lid. Made of durable materials, this direct replacement part is designed for long-lasting durability.

Product Features:

Ideal replacement – this console lid matches the fit and function of the original equipment lid
Durable construction – this console cover is made from quality materials for durability
Cost-effective solution – offers original equipment quality at competitive price
Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life

Toyota Prius Transmission Parts

from

$25.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Transmission cooler reinstallation kit
Contains part numbers 248001, 226201, 240250 and 4 hose clamps
Provides all hardware for reinstallation of Imperial transmission coolers
Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
Made of high grade nylon for easy installation
Removable buttons for cooler/fan relocation
Made for both transmission coolers and electric fan installation
Comes with Quick Connect coupler

from

$420.99

Carquest Premium anti-lock brake system (ABS) wheel speed sensors are designed to perform in harsh environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium ABS sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each ABS sensor undergoes extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium ABS sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
O-rings or seals are included (where applicable)
Weather-tight connectors prevent leaks and corrosion for longer life
Includes all necessary brackets and grommets for easier installation
Extensive design validation testing and 100% end-of-line tested
Fluorocarbon high-temperature o-ring seals coated with lubricant for easy installation prevents hub contamination.
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$381.99

Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
O-rings or seals are included (where applicable)
Weather-tight connectors prevent leaks and corrosion for longer life
Includes all necessary brackets and grommets for easier installation
Extensive design validation testing and 100% end-of-line tested
Fluorocarbon high-temperature o-ring seals coated with lubricant for easy installation prevents hub contamination.
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$12.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$8.99

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$4.29

These automatic transmission drain plug gaskets are designed to match the fit and function of the original gaskets required to repair the drain plug on specified vehicles, and are made of durable materials for reliable service.

Product Features:

Direct replacement – these automatic transmission drain plug gaskets are designed to match the fit and function of the original gasket required to repair the plug on specified vehicles
Ideal solution – recommended for replacement when transmission is serviced, or for an original gasket that is leaking
Durable construction – these parts are made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$144.99

The Neutral Safety Switch primary function is to prevent starter engagement while the vehicle is shifted into any drive gear (reverse/drive). The switch may also be used to turn the back-up lights on and to provide an input to the 4-wheel drive system on vehicles so equipped.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Where applicable electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

from

$111.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Where applicable electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

from

$80.99

Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$6.49

Product Features:

Brand may vary by location

from

$11.99

Product Features:

Design type: spring loaded; single-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$11.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial mounting kit system
For installation of transmission coolers and electric fans
Provides quick, effective installation of Imperial products
Contains nylon mounting rods, foam pads and locking buttons
Aftermarket electric fan and cooler mounting rods
Made with the highest quality materials
Quality machined for durability
Removable buttons for relocation
Aftermarket electric fan and cooler mounting rods
Made with the highest quality materials
Quality machined for durability
Removable buttons for relocation

from

$11.99

Design type: spring loaded; multi-lip
Temperature range: -30 Deg. F to 325 Deg. F / -34 Deg. C to 163 Deg. C
Superior thermal and chemical resistance
Good abrasion and dry running capability
Delivers quality and reliable performance for every type of repair

from

$55.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial Econo-Kool tube and fin transmission cooler
Size: 3/4″ x 5″ x 15-7/8″
Compact and mid-size cars
GVWR up to 16,000 lbs.; towing up to 2,500 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$85.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 10″ x 15-7/8″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$73.99

The Imperial Maxi-Cool XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

Imperial Maxi-Cool plate and fin transmission cooler
Size: 3/4″ x 11″ x 7-1/2″
Mid-size and full-size cars, pickups
GVWR up to 20,000 lbs.; towing up to 2,500 lbs.
Compatible with OEM cooler systems
Made with the highest quality materials
100% pressure testing to 150 PSI for quality assurance
33% more efficient than a comparable tube and fin design

from

$101.99

Anchor 9455 The Torque Strut prevents engine rocking. Each part is engineered and designed to OE Standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 2001-2003
Weight approx: 4 Lbs

from

$113.99

Anchor 9739 This mount supports the transmission and dampens vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 2004-2009
Weight approx: 2 Lbs

from

$86.99

Anchor 9284 This mount supports the transmission and dampens vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 2001-2006
Weight approx: 2 Lbs
With Weight

from

$13.79

AT SEAL DRIVE AXLE

Toyota Prius Automotive Accessories

from

$7.99

This floor mat retainer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this floor mat retainer matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this retainer is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$109.99

The Rightline Gear Sport Jr Car Top Carrier is 100% waterproof and attaches to vehicles WITH or WITHOUT a roof rack. Attach the carrier’s straps to a vehicle’s roof rack or use the Car Clips to attach the straps to a vehicle’s door frame weather molding. The carrier is made from UV protected PVC Semi-Coated Mesh XT for maximum durability. The intuitive attachment method and simplified design of the Sport Carriers make carrying extra cargo easy. The Sport Jr is the only car top bag made specifically for compact cars.

Product Features:

Capacity: 10 cu ft
Dimensions: 36″ L x 30″ W x 16″ H
Designed for compact cars (can be used on larger vehicles), WITH or WITHOUT a roof rack
100% waterproof with welded seams and SZIP waterproof zipper; no zipper flap required
Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide
Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide

from

$159.99

Lightweight and thin, the special edition indoor stretch car cover from Budge is perfect for luxurious indoor protection against dust and air-borne pollutants. Silky to the touch with a soft fleece lining this vehicle cover stretches and conforms to the curves of your vehicle for a custom-like fit. This indoor car cover is ideal for long-term vehicle storage and garage kept vehicles. The thickness of the auto cover helps keep out dust and other indoor environmental hazards. The indoor stretch material is completely nonabrasive and will not scratch your vehicles surface. This cover is available in red, silver gray or black. A storage bag included for when not protecting your vehicle. Our covers are available in a variety of sizes that will popular car makes and models.

Product Features:

This car cover fits cars 200″ L x 60″ W x 51″ H
This indoor vehicle cover is made from a stretchable material conforms to you car
Extremely soft fleece lining to protect your car from scratches
This auto cover is suitable for indoor use or for garage kept vehicles
This car cover fits vehicles like: Ford Mustang, Chevrolet Corvette Stingray Coupe, Chevrolet Corvette, Ford Thunderbird, Honda Civic

from

$16.99

New Standard Replacement Front License Plate Bracket

Product Features:

Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$117.99

The UVS100 Sunscreen is an affordable way to protect the interior of your vehicle from damaging UV rays as well as adding a level of comfort and protection by reducing the interior temperature of the vehicle on hot days. The sunscreen is custom-fitted so that there is maximum coverage of the windshield area and ease of installation. Sometimes called heat shields, sun shields or UV shields, sunscreens are useful at the beach, work, airport or anywhere you park. This premium quality, custom patterned folding sunscreen also features a soft felt lining on the inside to help protect your interior.

Product Features:

Custom fit to the windshield for complete coverage
Protect the dash and other interior components from damage by the sun
Reduce the interior temperature of the vehicle on hot days
The foam core center of the shield acts as an insulator
Easy to use and store away when not in use

from

$49.99

The AVS Aeroskin Hood Protector provides a tough defense against road debris for your vehicle’s hood. Aeroskin’s flush mount design fits the hood contours perfectly providing the best leading edge hood protection today. Aeroskins come with a .

Product Features:

Custom-Molded With Precision Engineering To Ensure A Perfect Fit
Provides Sleek, Aerodynamic Hood Protection With Low-Profile, Flush-Mount Design
Cool, Contoured And Classy Styling Accent
Easy, No-Drill Installation — Installs Using 3M Automotive-Grade Adhesive
Car Wash Safe
Available In Dark Smoke, Chrome, Matte Black, OEM Paint Code Color-Match Finishes

from

$59.99

Add the AVS Windflector to your vehicle today and get back the fresh air, warm sun and driving enjoyment you’ve been missing. This wind deflector adds a sturdy shield to the leading edge of your sunroof or moonroof in just minutes. Once installed, AVS Windflector deflects wind and moisture from your cabin, and helps reduce heat buildup inside the vehicle.

Product Features:

The Windflector Greatly Reduces Sunroof Wind Noise And Air Turbulence
Prevents The Rain From Entering The Sunroof Opening While Driving
Helps Reduce Heat Buildup Inside The Vehicle
Available In 5 Different Sizes For Perfect Fit
No Drill Installation
Installs Quickly And Easily With 3M Automotive-Grade Adhesive

from

$69.99

AVS In-channel Ventvisors offer a sleek profile that helps keep rain out and lets fresh air in to reduce interior heat build up. It’s easy no-drill application makes installation and provides a custom fit for your vehicle.

Product Features:

Precision Engineered For A Custom Fit On Your Vehicle With Modern, Curved Low-Profile Design
Installs In The Window Channel For A Sleek, Aerodynamic Appearance
Made From Durable, Impact-Resistant Acrylic
Available In Dark Smoke Finish

from

$184.99

Cargo Area Liner are custom patterned protection for your vehicle cargo area. Protect your OE carpet from spills and stains with this easy to install liner. Constructed of durable waterproof urethane-coated polyester fabric. Both the cargo area and the back of rear seat are covered and protected. Adjustable straps and side-release buckles attach around the vehicle headrests. Designed to allow split seat backs to work in the up or down position. Comes with a bumper flap that easily pulls out from underneath when needed.

Product Features:

Patterned protection for your vehicle cargo area
Easy to install
Durable waterproof urethane-coated polyester fabric
Both the cargo area and the back of rear seat are covered and protected
Adjustable straps and side-release buckles attach around the vehicle headrests
Designed to allow split seat backs to work in the up or down position
Comes with a bumper flap that easily pulls out from underneath when needed

from

$129.99

Designed custom fit the complex contours and surfaces of your vehicle’s floor space. Pants Saver Custom Fit Car Mat will protect your interior carpet and help keep Deep grooves channel water, snow, mud, spills, and debris to a unique central pan that traps up to 500 mL (16 oz.) of water and easily wipe or rinse clean. CUSTOM FIT: Your car mat are cut to order to fit the exact layout so that it install in seconds with no screws, bolts, fasteners, or tools required. PROTECT YOUR CAR AND CLOTHING: Deep grooves channel water, snow, mud, spills, and debris to a unique central pan that traps up to 500 mL (16 oz.) of liquid and easily wipe or rinse clean. SUPERIOR ALL WEATHER PERFORMANCE CAR MATS: Made from non-toxic, wear-resistant recycled PVC, BPA-free PantsSaver mats are waterproof and odorless even in extreme weather and maintain flexibility and durability down to minus 76 Deg. F (-60 Deg. C). NON-SLIP DESIGN: Flexible nibs grip the floor to keep the mat in place without damaging your vehicle carpet. MADE IN NORTH AMERICA: Proudly manufactured in Canada by members of the United Steelworkers (USW Local 1-500).

Product Features:

Custom Fit – Perfect Custom Fit for you Vehicle with full coverage. Mats are Non-toxic, Odorless, Contain No Latex
All Weather Protection – The Floor Mats are designed to provide complete automotive interior protection from dirt, mud, salt, rain, snow and keep your vehicle¿s floor clean and fresh in all Seasons
All Weather Protection – The Floor Mats are designed to provide complete automotive interior protection from dirt, mud, salt, rain, snow and keep your vehicle┐s floor clean and fresh in all Seasons
Built To Last – Offers waterproof protection with a Guard Against Spills and Debris
Easy to Clean – Simply spray with a hose, wipe with a washcloth or vaccum to remove Dirt, Grit, and Grime to leave them looking and feeling like Brand New
No-Slip Grip – Rubberized Nibs on the Bottom so the Mat Does not Move – Ergonomic Grooves on Top to Give your Foot Traction & Comfort
Custom Fit Car Mats
Anti Skid
Raised Borders
All Weather Protection
Odorless

from

$48.99

This is a fully functional remote fob that operates your vehicleft.s keyless entry system. This remote features 3 buttons: LOCK, UNLOCK, and PANIC. This key fob includes a fresh battery, offering prolonged performance and a wide physical range of operation. This clicker enhances security and vehicle entry for all drivers. Compatible Vehicles: Scion xA (2004-2006) Scion xB (2004-2006) Toyota 4Runner (1999-2008) Toyota Celica (2000-2005) Toyota Echo (2000-2005) Toyota FJ Cruiser (2007-2008) Toyota Highlander (2001-2007) Toyota Prius (2001-2003) Toyota RAV4 (2000-2005) Toyota Sequoia (2004-2007) Toyota Tacoma (2000-2006) Toyota Tundra (2004-2006) Toyota Yaris (2007-2008)

Product Features:

Toyota Keyless Entry Remote
3 Buttons: Lock, Unlock, & Panic
OEM FCCID: HYQ12BBX

from

$116.99

New CAPA Certified Standard Replacement Front Driver Side Undercar Shield

Product Features:

Made Of Polyethylene
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$10.99

New Standard Replacement Rear Undercar Shield

Product Features:

Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$137.99

This door armrest is designed to match the fit and appearance of the original armrest on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this door armrest is designed to match the fit and appearance of the original armrest on specified vehicles
Restores functionality – this armrest is made to fully restore appearance and functionality after the original part fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$137.99

This door armrest is designed to match the fit and appearance of the original armrest on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this door armrest is designed to match the fit and appearance of the original armrest on specified vehicles
Restores functionality – this armrest is made to fully restore appearance and functionality after the original part fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$186.99

This transmitter device operates your vehicleft.s keyless entry system with 3 button functions: LOCK, UNLOCK, and PANIC. Brand new with uncut emergency insert key included. Genuine, original OEM remote. Same as the remote you can purchase at your local dealership. This remote must be professionally programmed when received by your dealer or a local automotive locksmith. Emergency insert key also needs to be cut. Price above is quoted for one replacement keyless entry unit including the emergency key. Compatible Vehicles: Toyota Prius (2012-2019) Toyota Prius C (2012-2019) Toyota Prius V (2017) Toyota RAV4 (2015-2018)

Product Features:

Toyota Remote Entry Smart Key
3 Buttons: Lock, Unlock, & Panic
OEM FCCID: HYQ14FBA
This transmitter will work on vehicles equipped with Push to Start / Stop button on the dashboard and proxy keyless entry system.

from

$69.99

AVS Original Ventvisor is an external mount side window deflector with an unique design that allows fresh air to circulate through open windows while keeping the weather out reducing interior heat and window fogging. Original Ventvisors come with a .

Product Features:

Precision Engineered For A Custom Fit On Your Vehicle With Modern, Curved Design
Easy Installation With No-Drilling Or Special Hardware Required
Attaches Easily With 3M(TM) Automotive-Grade Adhesive Above The Window
Made From Durable, Impact-Resistant Acrylic
Available In Dark Smoke And Chrome Finishes

from

$89.99

AVS Low Profile Ventvisor has the smallest profile of side window deflectors available. By utilizing either In-channel or Outside Mount design (varies by application) AVS Low profile side window deflectors maintain the sleekest look for your vehicle while still allowing fresh air to circulate and not letting the weather outside your comfort. Comes with a .

Product Features:

Precision Engineered For A Custom Fit On Your Vehicle With Stealthy Design For The Lowest Profile
Choose Internal (In-Channel) Or External (Above Door Glass) Mount Options
Easy Installation With No-Drilling Or Special Hardware Required
Attaches Easily With 3M(TM) Automotive-Grade Adhesive Above The Window
Impact-Resistant Acrylic Or Warp-Resistant ABS Construction
Available In Dark Smoke (Acrylic) And Matte Black (ABS) Finishes

from

$19.99

Extremely powerful AM-80SX horn. Is an excellent replacement for stock AM-80SX or HK-9 disc style horns. Each horn is tested to assure maximum performance.

Product Features:

FIAMM AM80SX LOW note two terminal Freeway Blaster features aluminum coil motor, corrosion resistant steel housing and an ABS plastic projector.
Universal Fit
FIAMM horn package Includes: Universal mounting bracket, jumper wire, nut and female connectors
Each FIAMM horn is tested to assure maximum performance and exceeds SAE and OEM specifications
FIAMM horn can be installed on any vehicle, UTV, ATV, or Motorcycle. Proven to offer outstanding resistance to wear and tear
133dB @ 4″, 12V

from

$63.99

Freeze Plug Heater Cartridge made of cast aluminum. Interchangeable with the manufacturers original equipment-the only cost effective aftermarket solution available. Installs easily, just install in engine block core hole. No longer necessary to remove frost plug or drain coolant-just coat wit NSCG silicone grease G-624 (not included), insert, and clip into place. Original equipment for Toyota, Chrysler-jeep, Hyundai, Kia, and General Motors applications (see application guide for details). Simplified application information-Entire range of manufacturers applications covered by only five part numbers.

Product Features:

Freeze plug heater cartridge

from

$10.99

One brand new, aftermarket replacement remote case. There are no electronics included. You can simply replace the old case on your old remote. Just take the insides out and put them in this shell. Do not pay the dealer $250 for another remote if your case just worn out or broken! This remote case is for remotes with 3 buttons: LOCK, UNLOCK, and PANIC. Compatible Vehicles include but not limited to: Scion xA (2004-2006) Scion xB (2004-2006) Toyota 4Runner (1999-2008) Toyota Celica (2000-2005) Toyota Echo (2000-2005) Toyota FJ Cruiser (2007-2008) Toyota Highlander (2001-2007) Toyota Prius (2001-2003) Toyota RAV4 (2000-2005) Toyota Sequoia (2004-2007) Toyota Tacoma (2000-2006) Toyota Tundra (2004-2006) Toyota Yaris (2007-2008)

Product Features:

Works on select SCION and TOYOTA vehicles. Check vehicle compatibility before purchasing.
Replace just the case.
2 minute install. Setup is fast, easy, and uses no tools.
No electronics.

from

$13.99

Cracked or wore out your key fob case- Want to add a custom look- Just replace the case with this convenient, affordable keyless entry transmitter cover, restoring or enhancing the look.

Product Features:

Replacement or upgrade – this keyless remote case allows you to simply replace a broken case or upgrade your current look
Seamless fit – matches dimensions of original transmitter cover for specific vehicle applications for a tight seal
Reliable construction – keeps moisture and debris out of internal electronics for long service life
Trustworthy quality – backed by team of product experts and engineers in the United States, and more than a century of experience

Toyota Prius Interior Products

from

$415.99

The airbag clockspring is one piece of the passenger restraint system. The restraint airbag located in the driver’s steering wheel is hardwired, meaning the airbag has a directly wired connection to the vehicle passenger restraint module. The clockspring is located within the steering column just below the airbag assembly and contains a spirally wound flat ribbon conductor within it. As the steering wheel is rotated during normal driving conditions the electrical connection between the air bag and the restrain module remains complete.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$19.99

The AM-80SX is designed to provide lightweight compact size, yet powerful sound. It exceeds S.A.E. and O.E.M specifications for a wide range of vehicle application.

Product Features:

Features corrosion resistant steel housing and universal mounting bracket.
Available in high and low tone
FIAMM horn package Includes: Universal mounting bracket, jumper wire, nut and female connectors
Each FIAMM horn is tested to assure maximum performance and exceeds SAE and OEM specifications.
FIAMM horn can be installed on any vehicle, UTV, ATV, or Motorcycle with 12 volt application
125dB @ 4″, 12V

from

$14.99

This seat belt buckle button stop is designed to match the appearance, fit and function of the original stop on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this seat belt buckle button stop is designed to match the appearance, fit and function of the original stop on specified vehicles
Restores functionality – this buckle stop is made to fully restore appearance and functionality after the original part fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$4.99

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$594.99

The Automatic Headlight Sensor is a photoelectric device that reacts to ambient light conditions reporting to the body control module which will turn the headlights on or off based ambient light conditions.

Product Features:

Application matched components ensure the automatic headlight system can be returned to like new condition.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
This part will look and function just like the original sensor.

from

$276.99

WeatherTech Seat Protectors are the perfect accessory for those vehicle owners needing an extra step of protection for their rear vehicle seating. A much needed accessory for the family road trip warriors or pet car ride companions to prevent scratches, damage or spills from ruining the seat surface. The Seat Protectors are made from a polycotton drill fabric that features a durable water repellent finish that ll combat any juice box spill, cereal crumbs or pet mess. It s also engineered with an extra layer of nylon lining, which helps to further protect the covered seat. The Seat Protector stays in place with the help of durable straps, specialty inserts and a non slip bottom. Semi-custom to fit the size and type of vehicle. Quick and easy installation, as well as easily removable for cleaning. The Seat Protector is machine washable, making it an easy accessory for any family. This product is for rear seats only It is designed to fit most bench style and bucket rear seats. If your vehicle is equipped with a center seatbelt, it will not be accessible.

Product Features:

Made From A Polycotton Drill Fabric That Features A Durable Water Repellent Finish That ll Combat Any Juice Box Spill, Cereal Crumbs Or Pet Mess
Engineered With An Extra Layer Of Nylon Lining, Which Helps To Further Protect The Covered Seat
The Seat Protector Stays In Place With The Help Of Durable Straps, Specialty Inserts And A Non Slip Bottom
Semi-custom To Fit The Size And Type Of Vehicle
Machine Washable, Making It An Easy Accessory For Any Family
Machine Washable
Designed To Fit Bench Style Rear Seats

from

$276.99

Made From A Polycotton Drill Fabric That Features A Durable Water Repellent Finish That ll Combat Any Juice Box Spill, Cereal Crumbs Or Pet Mess
Engineered With An Extra Layer Of Nylon Lining, Which Helps To Further Protect The Covered Seat
The Seat Protector Stays In Place With The Help Of Durable Straps, Specialty Inserts And A Non Slip Bottom
Semi┐custom To Fit The Size And Type Of Vehicle
Machine Washable, Making It An Easy Accessory For Any Family
Machine Washable
Designed To Fit Bench Style Rear Seats

from

$131.99

Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Combination Switch provides centralized control of multiple vehicle functions such as headlights, turn signals, and wipers, enhancing driver convenience and safety by allowing seamless operation from a single control point. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:

Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

from

$0.69

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring Length service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for Length-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$25.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$155.99

The Accelerator Pedal Position (APP) sensor provides a signal identifying the location of the accelerator pedal to the engine control module. As the vehicle operator requests various degrees of torque from the engine the signal from the sensor provides the engine computer the necessary information to implement the request. The sensor provides two positive slope signals that have an offset voltage range and increase at different rates, the two signals from the sensor provide the engine computer with two unique signal inputs ensuring safety should one signal fail.

Product Features:

Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$171.99

Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$116.99

Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

from

$135.99

The Combination Switch combines the windshield wiper switch, windshield washer switch, headlight dimmer switch along with other possible features into one combined switch assembly mounted onto the steering column assembly.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Where applicable electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

from

$147.99

The main device in any electrical circuit is a switch. In an electrical circuit a device is required to turn a component on or off when commanded by the operator, within the switch are contacts that will complete the electrical path to the load, or driven device. The operation of a switch may be manual from a person or could be electrical from some sort of controller or computer.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Where applicable electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

from

$0.49

All our Multi-Purpose Retainers are made of high quality materials for long-lasting durability. Offering a full line of Multi-Purpose Retainers for a wide range of applications.

Product Features:

Durable nylon design for a long service life
Also suitable for a broad variety of industrial and commercial uses
Conveniently packaged in a variety of piece counts
Direct replacement Retainers available (where applicable) to ensure a proper fit

from

$6.29

Needa Parts, a division of the Hillman Group, is an industry leader in all types of automotive body fasteners, retainers, and clips, offering over 400 SKUs of interior, exterior, and underhood fasteners.

Product Features:

Needa Parts offers a complete assortment for all popular makes and models
Vehicle make specific fastener kits are available
All fasteners meet or exceed OEM standards

from

$112.99

SuedeMat dashboard covers are a clean and rich looking dash cover that looks and feels like suede leather. They maintain the same great custom fit as DashMats, molding to ridges and curves on your dashboard. Along with the rest of the DashMat products, it dramatically reduces windshield haze caused by gasses emitted from the dashboard. Also reduces hazardous windshield glare. Protect your dashboard from sun damage, such as cracks and warps.

Product Features:

The rich appearance and feel of suede-like fabric
Custom tailored for a precise, snug fit
Protects your dash from sun damage and reduces windshield glare
Vents, sensors and trays remain fully functional
Simple installation with hook and loop fasteners

from

$105.99

The Limited Edition Custom Dashboard Cover features a new warp-knit polyester fabric style that looks great with today’s vehicle interiors. Individually made to fit your vehicle’s specific dashboard. DashMat dashboard covers are a stylish way to cut windshield haze caused by gasses emitted from the dashboard. Dramatically reduces hazardous windshield glare as well. Rays from the sun beat through the dashboard at extremely high temperatures causing damage to the dashboard. Limited Edition DashMat dash covers protect your vehicle’s dashboard in the most extreme temperature conditions.

Product Features:

Unique warp-knit design fits perfectly with today’s vehicle interiors
Compliments technical fabrics in newer vehicles
Custom fit to the dashboard of your vehicle
Helps prevent dashboard warping and cracking
Reduces hazardous windshield glare
Vents and sensor openings pre-cut for a factory finish look
Passenger-side airbag opening included where applicable
Hook and loop fasteners included for easy secure installation

from

$106.99

VelourMat dashboard covers are constructed of soft, elegant velour material. Each VelourMat is custom made for a precise fit. Dramatically reduces windshield haze caused by gasses emitted from the dashboard. Also reduces hazardous windshield glare. Protect your dashboard from sun damage, such as cracks and warps.

Product Features:

Made of soft elegant rich velour
Custom made to fit each dashboard
Hook & loop fasteners included for easy & secure installation
Cuts hazardous windshield glare
Protects dashboard from sun damage stopping cracks and warping
Passenger-side airbag opening included where applicable

from

$101.99

Dashboard Cover

from

$106.99

Made of soft elegant rich velour
Custom made to fit each dashboard
Hook & loop fasteners included for easy & secure installation
Cuts hazardous windshield glare
Protects dashboard from sun damage stopping cracks and warping
Passenger-side airbag opening included where applicable

from

$106.99

Dashboard Cover

from

$112.99

The rich appearance and feel of suede-like fabric
Custom tailored for a precise, snug fit
Protects your dash from sun damage and reduces windshield glare
Vents, sensors and trays remain fully functional
Simple installation with hook and loop fasteners

from

$106.99

Made of soft elegant rich velour
Custom made to fit each dashboard
Hook & loop fasteners included for easy & secure installation
Cuts hazardous windshield glare
Protects dashboard from sun damage stopping cracks and warping
Passenger-side airbag opening included where applicable

Toyota Prius Engine Parts

from

$24.99

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Validated for fit, form and function
Unsurpassed quality you can trust
Includes all the parts necessary to complete the repair unless otherwise noted

from

$83.99

New Standard Replacement Front Driver Side Undercar Shield

Product Features:

Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$20.99

ENG TMNG CHN TNSGUID

from

$20.99

This engine oil dipstick is designed to match the fit and function of an original equipment dipstick in specified applications. Level marks are clearly distinguished and properly gauged for accuracy.

Product Features:

Ideal replacement – this engine oil dipstick is designed to match the fit and function of an original equipment dipstick in specified applications
Ideal solution – level marks are clearly distinguished and properly gauged for accuracy
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$142.99

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium oil pans meet or exceed the performance of the original equipment they replace.

Product Features:

Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE expertise
Durable powder coating applied to exterior of oil pan for a long lasting rust free unit
Washed and then sealed with an anti-corrosive spray on the interior for a rust free unit at installation
Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
Road tested to ensure real world performance and to verify that each design meets our high standards for quality
Coating salt spray tested for over 200 hours to insure durability

from

$649.99

VVT SPROCKET

from

$142.99

Meets or exceeds OEM performance requirements. Cloyes utilizes the latest in design and material technology, ensuring quiet and maintenance-free experience. SET INCLUDES: S938 Engine Timing Camshaft Sprocket (1 EA), 9-4214 Engine Timing Chain (1 EA), 9-5564 Engine Timing Chain Guide (1 EA), 9-5565 Engine Timing Chain Tensioner (1 EA), 9-5566 Engine Timing Chain Tensioner Guide (1 EA).

Product Features:

Meet or exceed OEM performance requirements, ensuring a quiet and maintenance free experience
Utilizes the latest in design and technology to offer a complete chain kit solution
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance

from

$8.99

Sprocket Made From High Alloy Material. Sprocket Teeth Are Heat Treated. Precision Tooth Form To Assure Proper Chain Engagement, And Precise Keyway To Tooth Timing.

Product Features:

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$31.99

Meets or exceeds OEM performance requirements. Cloyes utilizes the latest in design And material technology, ensuring quiet And maintenance-free experience.

Product Features:

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Meet or exceed OEM performance requirements
Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience

from

$30.99

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$6.99

Product Features:

Superior Wear Protection – Formulated with extreme pressure additives to protect engine components from metal-to-metal contact during initial startup
High Tackiness – Stays in place during assembly and storage, ensuring consistent lubrication exactly where it’s needed
Broad Compatibility – Safe for use with all engine components including camshafts, lifters, bearings, and valve train parts
Easy Startup Support – Reduces friction and prevents dry starts by providing instant lubrication during first engine fire-up

from

$13.99

Since 1921, Cloyes has been the trusted leader in automotive timing systems. As a critical component of the engine’s timing system, the crankshaft sprockets work in unison with the timing chain, tensioners, guides and other sprockets, to ensure precise timing. Cloyes engine timing crankshaft sprockets are precision-tooled with exact tooth geometry and a perfectly matched bore, off-set and timing index for superior fit, reliability, and long-term performance. To ensure total timing system integrity, Cloyes recommends replacing the chain along with the tensioners, guides, and sprockets during service. Trusted by professionals for over a century & backed by an industry-leading limited Warranty and technical support.

Product Features:

Features precision-tooled tooth form, bore, off-set and timing index for superior fit, reliability, and long-term performance in engine timing repairs
CAD designed and manufactured using premium materials and heat-treated for OE-level fit and function, allowing for smooth installation and reliable performance
Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks
Available in application-specific kit or as a stand-alone product, offering installation flexibility and convenience
Backed by Limited Lifetime Warranty and over 100 years in engineering leadership with unmatched technical support and repair confidence in every component

from

$103.99

For secure, lasting macro and micro sealing, and protection against fuel, oil, water, and anti-freeze, Victor Reinz cylinder head gaskets deliver optimal service. Victor Reinz gaskets deliver OE proven strength and resistance to extreme temperatures and high-combustion pressures, and Victor Reinz engineers choose the most effective materials and designs from the global resources of Dana Incorporated.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$11.79

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Validated for fit, form, and function
Unsurpassed quality you can trust
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$59.99

Rein Automotive OE quality oil pan kits are made with premium materials and designed and manufactured to be direct-fit replacements. Rein oil pans are designed to tight tolerances to ensure proper sealing. Kits include OE quality gaskets or Ajusil silicone sealant where the OE pans do not use a gasket. Kits include new drain plugs.

Product Features:

Includes OE quality gaskets or Ajusil silicone sealant.
Includes new drain plugs.
Designed to tight tolerances to ensure proper sealing.

from

$77.99

The variable valve timing (VVT) system allows the engine control module (ECM) to regulate the intake and exhaust valve phase angle providing the most optimal engine volumetric efficiency under all engine operating condition to control tailpipe emissions and engine efficiency. Variable valve timing is an emission control device and although there are various methods of operation, the typical device is regulated by oil control valves, actuator solenoids and camshaft phasers.

Product Features:

Precision-wound coated copper windings increase product durability and life cycle.
Hard-coated and anodized spool valve to prevent corrosion and increase service life.
Threaded mounting bolt, hardware, and/or gaskets where applicable for easy installation.
Thermoplastic that is resistant to high temperatures, moisture, and chemicals.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure product reliability, every time.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$20.99

Relay

Product Features:

Lifecycle lasts up to 10 times longer than the competitor’s
Flux free micro arc welding versus competitors that solder
High conductive material that does not corrode
Shortest path for the electrical current improves efficiency
Offered by world’s largest relay manufacturer

from

$774.99

Remanufactured Cylinder Heads are complete rebuild & include new valve stem seals, soft plugs & verified camshafts. All threads are checked and repaired if necessary. Cylinder Heads are packaged in heavy plastic to protect the unit.

Product Features:

All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
All threads and machined surfaces are and repaired with technology that exceeds the original metal
Non-sealing iron surfaces painted to prevent oxidization

from

$60.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Conversion Sets (CS) provide every gasket for lower engine work – add a Head Set (HS) for complete engine overhaul work
Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Validated for fit, form and function
Unsurpassed quality you can trust
Includes all the parts necessary to complete the repair unless otherwise noted
Includes all the parts necessary to complete the repair unless otherwise noted

from

$61.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$824.99

Meet or exceed OEM performance requirements, ensuring a quiet and maintenance-free experience. Utilizes the latest in design and technology to offer a complete chain kit solution. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance. CAD designed and manufactured using premium materials. Refer to our online catalog for detailed application-specific information. SET INCLUDES: 9-4220 Engine Timing Chain (1 EA), 9-5935 Engine Timing Chain Tensioner (1 EA), 9-5936 Engine Oil Pump Chain Tensioner (1 EA), 9-5937 Engine Timing Chain Tensioner Guide (1 EA), 9-5938 Engine Timing Chain Guide (1 EA), 9-5940 Engine Timing Chain Guide (1 EA), C751 Engine Oil Pump Chain (1 EA), S1095 Engine Timing Crankshaft Sprocket (1 EA), S1097 Engine Timing Crankshaft Sprocket (1 EA), S846 Engine Timing Camshaft Sprocket (1 EA), S923 Engine Oil Pump Sprocket (1 EA), WP115 Electric Engine Water Pump (1 EA).

Product Features:

Timing Chain Kits with Water Pump includes all components for a quick and efficient replacement
Utilizes the latest in design and technology to offer a complete chain kit solution
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
CAD designed and manufactured using premium materials
Refer to our online catalog for detailed application-specific information

from

$24.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Engineered and manufactured specifically for repair applications
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$86.99

Anchor 9514 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 2010-2017
Weight approx: 3 Lbs

from

$248.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial Swirl-Cool engine oil cooler kit
Size: 1-1/2″ x 6-1/2″ x 18″
Heavy-duty applications
All except Chevrolet V8 applications
Universal Cooler, NOT a direct OE replacement. User to determine fitment prior to installation
Heavy duty applications
All except Chevrolet V8 applications
Universal Cooler, NOT a direct OE replacement. User to determine fitment prior to installation
Heavy duty applications
All except Chevrolet V8 applications

from

$3954.99

Your remanufactured engine is tested in several specific ways after being assembled; Multiple Pressure tests. Each component is carefully checked after being cleaned to see if cracks or other defects exist in the casting. After being assembled, we pressure

Product Features:

Each engine we remanufacture is essentially reverse engineered – in part to discover original factory deficiencies. If possible, our seasoned R&D personnel & QC experts make improvements. Why shouldn’t our engine last longer than your First !
Engines come with installation gasket set & oil pump unless noted otherwise. If we have important installation information it will be included on tags or in the paperwork packaged with your engine.
Engines are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
Each engine is remanufactured with quality OE level components not “white” box generic parts that may or may not satisfy your needs and expectations. When you use the best you get the best results and satisfaction.

Looking for the best Toyota Prius aftermarket replacement parts? Replacing worn and broken parts on your Toyota Prius? Check out our online catalog to find the best selection of aftermarket Toyota Prius parts as well as real user reviews on Toyota Prius replacement parts. Make an informed decision about every component you add to your Prius.

At Advance Auto, we’ve got you covered when it comes to getting your Toyota Prius in tip top condition. We’ve got over 2,088 Toyota Prius parts to choose from in popular categories like Body Parts, Transmission Parts and Automotive Accessories. If you’re looking for the best prices, try searching our Toyota Prius parts catalog to compare OEM and aftermarket parts for your Toyota Prius.

Whether you need Toyota Prius body parts, interior components, or custom Toyota Prius parts you can find them online at Advance Auto. Want to order your Interior Products online? Or maybe you need your Toyota Engine Parts same day? No problem, you can pick up Prius parts in person at locations across the country, or have them delivered to straight to your door after ordering online. Finding a great deal on new and used Toyota Prius parts has never been easier.

Advance Auto customers frequently search for the following types of Toyota Prius auto parts. Check out customer reviews and ratings, and compare prices on the following Toyota Prius parts:

People also search Advance Auto for these popular years of the Toyota Prius:

Toyota Prius Parts

KAI – Spoiler (Part No.TO1093124)

Dorman – Window Regulator: Power, 1 Pack (Part No.749-164)

StrongArm – Liftgate Lift Support: 19.4" Ext Length, 7.75" Travel, 93 Lbs of Force, 1 Pk (Part No.D6244)

Le Bra – Custom Front End Cover (Part No.551364-01)

Dorman – Door Lock Actuator – Integrated with Latch (Part No.931-494)

Dorman – Hood Release Cable with Handle (Part No.912-070)

K-Source – Passenger Car Replacement Glass: Driver Side, Flat Glass, Includes Mounting Tape and Instructions (Part No.99227)

KAI – Hood Hinge (Part No.TO1236167)

Dorman – Help – Interior Door Handle Front/Rear Right (Part No.81237)

KAI – Fender Liner (Part No.TO1249158C)

Dorman – Molding Clip Head Dia 0.5 In. Shank Length 0.62 In. Hole Dia 0.32 In. (Part No.963-529)

Dorman – Help – Exterior Door Handle Front Chrome (Part No.81950)

K-Source – Mirror Assembly: Driver Side, Power Adjustment, Heated, Foldable (Part No.70628T)

Dorman – Molding Retainer (Part No.963-533D)

KAI – Fender (Part No.TO1241232PP)

KAI – Bumper Cover Retainer (Part No.TO1132101)

KAI – Bumper Cover Retainer (Part No.TO1133101)

KAI – Bumper Impact Absorber (Part No.TO1070162C)

Dorman – Bumper Retainer (Part No.963-631D)

Dorman – Door Hinge Assembly Door Lower or Upper (Part No.924-990)

KAI – New Standard Replacement Front Bumper Grille, Matte-Black (Part No.TO1036112)

KAI – Bumper Mounting Bracket (Part No.TO1066172)

Dorman – Bumper Retainer (Part No.963-634D)

COAST TO COAST – 15 Inch Diameter, Silver Color, Abs Plastic, Set Of 4 (Part No.IWC1515TP)

Dorman – Center Console Lid Replacement (Part No.924-377)

Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)

Carquest Premium – ABS Wheel Speed Sensor (Part No.ARC2823)

Carquest Premium – ABS Wheel Speed Sensor (Part No.ARC2856)

National – Multi Purpose Seal (Part No.710731)

National – Multi-Purpose Seal (Part No.710702)

Dorman – Differential, Transmission Drain And Fill Plug Crush Washers, Size 18mm (Part No.652-531CD)

Carquest Premium – Neutral Safety Switch (Part No.CSA3819)

Carquest Premium – Neutral Safety Switch (Part No.CSA3825)

Carquest Premium – Multi-Purpose Relay (Part No.RAA1953)

Driveworks – Auto Transmission Manual Shaft Seal (Part No.S-221207)

National – Multi Purpose Seal (Part No.221207)

Imperial – Mounting Kit System (Part No.226201)

National – Automatic Transmission Torque Converter Seal (Part No.710929)

Imperial – Econo-Kool Transmission Oil Cooler (Part No.242010)

Imperial – High Performance Transmission Oil Cooler (Part No.240516)

Imperial – Maxi-Kool XL Transmission Oil Cooler (Part No.243007)

Anchor – Torque Strut Motor Mount: Rear, 1 Piece (Part No.9455)

Anchor – Transmission Mount: Left, 1 Piece (Part No.9739)

Anchor – Transmission Mount: Left, 1 Piece (Part No.9284)

ATP – AT SEAL DRIVE AXLE (Part No.RO-54)

Dorman – Help – Floor Mat Retainer Clips (Part No.45188)

Rightline Gear – Sport Jr. Car Top Carrier (Part No.100S50)

Budge – Indoor Stretch Car Cover, Black, Size 3: Fits Up To 16’8" L, Soft Inner Lining (Part No.BSC-3)

KAI – License Plate Bracket (Part No.TO1068120)

Covercraft – UVS100 Custom Sunscreen – Blue Metallic (Part No.UV10824BL)

Auto Ventshade (AVS) – Aeroskin, Hood Protector, Smoke, Low Profile, 1 Pc (Part No.320011)

Auto Ventshade (AVS) – Windflector – Classic, Window, Fits Up To 35.5" Wide Sunroofs, Smoke, Outside Mount, 1 Pc (Part No.77003)

Auto Ventshade (AVS) – Ventvisor Window Visors, In-Channel Mount, Smoke, Front And Rear, 4 Pc (Part No.194638)

Covercraft – Cargo Area Liner (Part No.PCL6286GY)

PantsSaver – Custom Fit 4 Piece Floor Mat Set, Black (Part No.4215111)

iKeyless – TOYOTA KEYLSS REMOTE (Part No.TOY044)

KAI – Undercar Shield (Part No.TO1228129C)

KAI – Undercar Shield (Part No.TO1228164)

Dorman – Armrest (Part No.924-838)

Dorman – Armrest (Part No.924-840)

iKeyless – TOYOTAREMOTEENTRYKEY (Part No.TOY155SMARTKEY)

Auto Ventshade (AVS) – Ventvisor Window Visors, Outside Mount, Smoke, Front And Rear, 4 Pc (Part No.94963)

Auto Ventshade (AVS) – Low Profile Ventvisor Window Visors, Outside Mount, Smoke, Front And Rear, 4 Pc (Part No.894055)

Fiamm – Freeway Blaster Low Note Horn: Universal Fit, Hardware Included (Part No.7211223)

Kat’s – Engine Heater Cartridge (Part No.11813)

iKeyless – TOYOTA BLK REM SHELL (Part No.TORB-30RE)

Dorman – Help – Keyless Remote Cases Repair (Part No.13663)

Carquest Premium – Air Bag Clockspring (Part No.CLC1002)

Fiamm – AM-80SX High Tone Replacement Horn: Universal Fit for all 12 Volt Applications (Part No.7200223)

Dorman – Help – Seat Belt Stop Kit (Part No.74358)

Dorman – Hood Insulator Clip (Part No.963-088)

Carquest Premium – Automatic Headlight Sensor (Part No.CAA1308)

WeatherTech – High Back Rear Bench Seat, Polycotton Twill, Tan, Single (Part No.DE2011TN)

WeatherTech – Highback Rear Bench Seat – 56"W X 19.5"D X 22.5"H, Gray, Polycotton (Part No.DE2011GY)

Carquest Premium – Turn Signal Switch (Part No.SAE1467)

Dorman – Hood Insulator Clip – Toyota (sold by each) (Part No.700-669)

Carquest Premium – Multi-Purpose Relay (Part No.RAA1733)

Carquest Premium – Accelerator Pedal Sensor (Part No.PPE1329)

Carquest Premium – Accelerator Pedal Sensor (Part No.PPE1465)