Toyota Camry Oxygen Sensor
Toyota Camry Oxygen Sensor
Your Toyota Camry will be happy to know that the search for the right Oxygen Sensor products you’ve been looking for is over! Advance Auto Parts has 112 different Oxygen Sensor for your vehicle, ready for shipping or in-store pick up. The best part is, our Toyota Camry Oxygen Sensor products start from as little as $29.99.
When it comes to your Toyota Camry, you want parts and products from only trusted brands. Here at Advance Auto Parts, we work with only top reliable Oxygen Sensor product and part brands so you can shop with complete confidence. Some of our top Oxygen Sensor product brands are Bosch, and Denso. We’re sure you will get the right product to keep that Camry running for a long time.
We even have reviews of our OEM and aftermarket Oxygen Sensor products to help you buy with confidence. Hear from other customers via the 34,806 reviews on parts for your Toyota Camry.
Shop online, find the best price on the right product, and have it shipped right to your door. If you prefer to shop in person for the right Oxygen Sensor products for your Camry, visit one of our local Advance Auto Parts locations and you’ll be back on the road in no time!
Oxygen Sensor for a Toyota Camry
Use the fitment form at the top of the page to select your exact year and engine type for your Toyota Camry.
-
Denso - Oxygen Sensor 4 Wire, Direct Fit, Heated, Wire Length: 10.24 (Part No. 234-4149)
DescriptionDENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO's exclusive aluminum oxide trap
Product Features:- Specifically designed to meet the increasing demands of today's engines
- 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle's fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
Read 1 review(s)Review snapshot ® by PowerReviews
-
I would purchase this again
I would purchase this again
Submitted 2017-10-07
By andrew
From undisclosed
bought a cheap after market sensor first, still showed same code. bought this OEM denso part and have not had an issue with the check engine light coming back on. Don't waste your time or money on the cheap aftermarket sensors.
Bottom Line
from $111.99
View Product -
Denso - Oxygen Sensor 4 Wire, Direct Fit, Heated, Wire Length: 12.8 (Part No. 234-4064)
DescriptionDENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO's exclusive aluminum oxide trap
Product Features:- Specifically designed to meet the increasing demands of today's engines
- 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle's fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
Read 1 review(s)Review snapshot ® by PowerReviews
-
I would buy all my parts from here
I would buy all my parts from here
Submitted 2017-06-22
By Andrew
From undisclosed
Great store! Great management with great service. My part works great.
Bottom Line
from $91.99
View Product -
Bosch - Oxygen Sensor (Part No. 13353)
DescriptionBosch leads the way in oxygen sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.
Product Features:- Double laser-welded stainless steel body protects against contamination
- Seared protection tube due to 100% functional quality test
- Pre-coated threads with anti-seize compound right out of the box
- True Direct-fit OE connectors and harness
- Performance meets or exceeds OE specifications
Read 1 review(s)Review snapshot ® by PowerReviews
-
Exact Replacement for OEM
Exact Replacement for OEM
Submitted 2013-07-09
By Fix it, Dad
From SE CT
This replacement oxygen sensor includes the plug, boot, and clamp that came on the OEM part, making it an exact replacement. Whether or not it will permanantly eliminate a persistant P0420 trouble code remains to be seen.
Bottom Line recommended
from $43.99
View Product -
Bosch - Oxygen Sensor (Part No. 13720)
DescriptionBosch leads the way in oxygen sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.
Product Features:- Double laser-welded stainless steel body protects against contamination
- Seared protection tube due to 100% functional quality test
- Pre-coated threads with anti-seize compound right out of the box
- True Direct-fit OE connectors and harness
- Performance meets or exceeds OE specifications
Read 1 review(s)Review snapshot ® by PowerReviews
-
Work great [...]
Work great [...]
Submitted 2011-06-16
By Chuck
From Cypress, TX
[...]
Bottom Line recommended
from $112.99
View Product -
NTK - OE Type Oxygen Sensor (Part No. 24456)
DescriptionNTK is the world's largest supplier and manufacturer of original equipment oxygen sensors. Combining expertise with innovation, NTK Oxygen Sensors offer superior fit, form and function. NTK Oxygen Sensors are extensively tested during manufacturing to guarantee quality and reliability. Supplied with a factory-fitted OE connector for easy installation. Precision-manufactured with a sensing element incorporating premier technical ceramics Optimizes emissions and fuel economy when replacing worn oxygen sensors.
Product Features:- Extensively tested during manufacture to guarantee quality and reliability
- Supplied with a factory-fitted OE connector for easy installation
- Precision-manufactured with a sensing element incorporating premier technical ceramics
- Optimizes emissions and fuel economy
Read 1 review(s)Review snapshot ® by PowerReviews
-
2012 Rav4 Sport AWD 4cl
2012 Rav4 Sport AWD 4cl
Submitted 2017-09-11
By fale#809
From Woodbridge, VA
Perfect fit. just like the OEM one from Toyota. Cleared the engine code right away.
Bottom Line recommended
from $85.99
View Product -
Denso - Oxygen Sensor 4 Wire, Universal, Heated, Wire Length: 11.77 (Part No. 234-4050)
DescriptionDENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO's exclusive aluminum oxide trap
Product Features:- Specifically designed to meet the increasing demands of today's engines
- 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle's fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
Read 1 review(s)Review snapshot ® by PowerReviews
-
works good
works good
Submitted 2012-10-15
By chris
From watkinville ga
Good product
Bottom Line recommended
from $69.99
View Product -
Denso - Oxygen Sensor 2 Wire, Universal, Unheated, Wire Length: 11.77 (Part No. 234-2000)
DescriptionDENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO's exclusive aluminum oxide trap
Product Features:- Specifically designed to meet the increasing demands of today's engines
- 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle's fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
Read 1 review(s)Review snapshot ® by PowerReviews
-
Excellent Fit
Excellent Fit
Submitted 2011-08-06
By The Grease man
From Poughkeepsie NY
It is an OEM Part for Toyota
Bottom Line
from $34.49
View Product -
Denso - Oxygen Sensor 4 Wire, Direct Fit, Heated, Wire Length: 12.6 (Part No. 234-4622)
DescriptionDENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO's exclusive aluminum oxide trap
Product Features:- Specifically designed to meet the increasing demands of today's engines
- 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle's fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
Read 3 review(s)Review snapshot ® by PowerReviews
-
yes
yes
Submitted 2018-11-22
By Charles
From Undisclosed
exact part
Bottom Line
-
Nice quality
Nice quality
Submitted 2018-11-02
By Ganesh
From Undisclosed
I return this sensor and I didn't get my money back
Bottom Line
-
I would buy this product again.
I would buy this product again.
Submitted 2018-05-23
By Daniel
From undisclosed
So far so good. It has a one year warranty.
Bottom Line
from $101.99
View Product -
Denso - Oxygen Sensor 4 Wire, Direct Fit, Heated, Wire Length: 28.74 (Part No. 234-4137)
DescriptionDENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO's exclusive aluminum oxide trap
Product Features:- Specifically designed to meet the increasing demands of today's engines
- 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle's fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
Read 3 review(s)Review snapshot ® by PowerReviews
-
Denso HO2 sensor for '06 Scion Xb
Denso HO2 sensor for '06 Scion Xb
Submitted 2019-02-06
By Michael
From Undisclosed
Don't cheap out with O2 sensors - this one works like a charm!
Bottom Line
-
Recommend
Recommend
Submitted 2019-02-04
By Dennis
From Undisclosed
Installed on 96 gmc k1500. No problems
Bottom Line
-
Great fit and performance!
Great fit and performance!
Submitted 2019-01-21
By Tom
From Undisclosed
High quality parts which install and function flawlessly. Easy shopping experience ordering on-line and just pickup at my local store. Will definitely buy again.
Bottom Line
from $101.99
View Product -
Denso - Oxygen Sensor 4 Wire, Direct Fit, Heated, Wire Length: 9.45 (Part No. 234-4260)
DescriptionDENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO's exclusive aluminum oxide trap
Product Features:- Specifically designed to meet the increasing demands of today's engines
- 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle's fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
Read 3 review(s)Review snapshot ® by PowerReviews
-
Denso HO2 sensor for '06 Scion Xb
Denso HO2 sensor for '06 Scion Xb
Submitted 2019-02-06
By Michael
From Undisclosed
Don't cheap out with O2 sensors - this one works like a charm!
Bottom Line
-
Recommend
Recommend
Submitted 2019-02-04
By Dennis
From Undisclosed
Installed on 96 gmc k1500. No problems
Bottom Line
-
Great fit and performance!
Great fit and performance!
Submitted 2019-01-21
By Tom
From Undisclosed
High quality parts which install and function flawlessly. Easy shopping experience ordering on-line and just pickup at my local store. Will definitely buy again.
Bottom Line
from $91.99
View Product -
Denso - Oxygen Sensor 4 Wire, Direct Fit, Heated, Wire Length: 10.24 (Part No. 234-4261)
DescriptionDENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO's exclusive aluminum oxide trap
Product Features:- Specifically designed to meet the increasing demands of today's engines
- 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle's fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
Read 3 review(s)Review snapshot ® by PowerReviews
-
Denso HO2 sensor for '06 Scion Xb
Denso HO2 sensor for '06 Scion Xb
Submitted 2019-02-06
By Michael
From Undisclosed
Don't cheap out with O2 sensors - this one works like a charm!
Bottom Line
-
Recommend
Recommend
Submitted 2019-02-04
By Dennis
From Undisclosed
Installed on 96 gmc k1500. No problems
Bottom Line
-
Great fit and performance!
Great fit and performance!
Submitted 2019-01-21
By Tom
From Undisclosed
High quality parts which install and function flawlessly. Easy shopping experience ordering on-line and just pickup at my local store. Will definitely buy again.
Bottom Line
from $101.99
View Product -
NTK - OE Type Oxygen Sensor (Part No. 24047)
DescriptionNTK is the world's largest supplier and manufacturer of original equipment oxygen sensors. Combining expertise with innovation, NTK Oxygen Sensors offer superior fit, form and function. NTK Oxygen Sensors are extensively tested during manufacturing to guarantee quality and reliability. Supplied with a factory-fitted OE connector for easy installation. Precision-manufactured with a sensing element incorporating premier technical ceramics Optimizes emissions and fuel economy when replacing worn oxygen sensors.
Product Features:- Extensively tested during manufacture to guarantee quality and reliability
- Supplied with a factory-fitted OE connector for easy installation
- Precision-manufactured with a sensing element incorporating premier technical ceramics
- Optimizes emissions and fuel economy
Read 2 review(s)Review snapshot ® by PowerReviews
-
Not a upstream sensor
Not a upstream sensor
Submitted 2017-07-01
By Milesius
From Boston
I originally bought this sensor to replace the air fuel upstream sensor and for a 5.5 2005 Toyota camy this will not fit in the manifold the cord is too short and wont fit in the connector!I learned this the Hard Way!But it does work perfectly fine as a downstream 02 sensor its just. Not a upstream as advertised. At least for a camry
Bottom Line recommended
-
Oxygen Sensor
Oxygen Sensor
Submitted 2016-10-09
By Acce
From Bellwood,Illinois
The sensor was easy to install and reset the code automatically after about five minutes. This allowed me to Pass my emissions test with no problems
Bottom Line recommended
from $81.99
View Product -
Bosch - Oxygen Sensor (Part No. 15244)
DescriptionBosch leads the way in oxygen sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.
Product Features:- Double laser-welded stainless steel body protects against contamination
- Seared protection tube due to 100% functional quality test
- Pre-coated threads with anti-seize compound right out of the box
- True Direct-fit OE connectors and harness
- Performance meets or exceeds OE specifications
Read 2 review(s)Review snapshot ® by PowerReviews
-
Easy exchange!
Easy exchange!
Submitted 2011-02-14
By jill get a deal
From Indiana
Great OEM part!!
Bottom Line recommended
-
Great servce[...] thanks!
Great servce[...] thanks!
Submitted 2010-01-26
By Joisster
From Richmond, Virginia
The part replaced the OEM part flawlessly. took about 30 minutes to the whole repair and used the installed wire clips to route and secure the wire.
Bottom Line recommended
from $62.99
View Product -
Bosch - Oxygen Sensor (Part No. 15728)
DescriptionBosch leads the way in oxygen sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.
Product Features:- Our premium oxygen sensors are designed to improve fuel economy while reducing harmful emissions
- Patented SmartLink connector system
- No special tools required for installation
- Sealed protection tube due to 100% functional quality test
- Performance meets or exceeds OE specifications
Read 2 review(s)Review snapshot ® by PowerReviews
-
great price product as described
great price product as described
Submitted 2011-07-16
By Oldfart
From Mobile, Al
great price product as described
Bottom Line recommended
-
Easy Advance Purchase
Easy Advance Purchase
Submitted 2010-11-10
By Kelly
From South Carolina
The product came with easy to read and understand instructions for installation. Installation was an ease. The product matched up great and works wonderful. My only complaint is my old O2 sensor which made my check enginelight come on gave me better MPG than the new one. A little disappointed but I guess my engine may need a little tuning.
Bottom Line recommended
from $43.49
View Product -
Bosch - Oxygen Sensor (Part No. 13355)
DescriptionBosch leads the way in oxygen sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.
Product Features:- Double laser-welded stainless steel body protects against contamination
- Seared protection tube due to 100% functional quality test
- Pre-coated threads with anti-seize compound right out of the box
- True Direct-fit OE connectors and harness
- Performance meets or exceeds OE specifications
Read 3 review(s)Review snapshot ® by PowerReviews
-
Fits perfectly for Toyota Sienna 2000 CE
Fits perfectly for Toyota Sienna 2000 CE
Submitted 2014-08-13
By DIYauto
From kennesaw, ga
I had the check engine light on my dash and diagnosed it as code p0155 and sensor bank2 sensor1 defective. Used this part to fix the issue. now it has been a month and the part seems to have fixed the issue permanently.
Bottom Line recommended
-
Excellent product
Excellent product
Submitted 2014-02-06
By Pintu
From IL
I would recommend this sender.
Bottom Line recommended
-
Too Short!
Too Short!
Submitted 2013-08-02
By Jake
From Fort Wayne, IN
Chatted with an agent and also verified with the CSA at the store that the part would fit. I got it back home. Went to replace the upstream O2 sensor an the length of the wires was short by about 5 inches. This will not fit a 2004 Toyota Camry XLE (as stated by the website, online agent, and in store associate). Also, when they tell you to try the universal one- DON'T DO IT!!! It fits and the ease of use is fine, but it will throw your check engine light. Just spend the extra money and buy the OEM one. Don't waste your time. Then you won't have to go through the mess that this situation is putting me in!
Bottom Line not recommended
from $44.49
View Product -
NTK - OE Type Oxygen Sensor (Part No. 24548)
DescriptionNTK is the world's largest supplier and manufacturer of original equipment oxygen sensors. Combining expertise with innovation, NTK Oxygen Sensors offer superior fit, form and function. NTK Oxygen Sensors are extensively tested during manufacturing to guarantee quality and reliability. Supplied with a factory-fitted OE connector for easy installation. Precision-manufactured with a sensing element incorporating premier technical ceramics Optimizes emissions and fuel economy when replacing worn oxygen sensors.
Product Features:- Extensively tested during manufacture to guarantee quality and reliability
- Supplied with a factory-fitted OE connector for easy installation
- Precision-manufactured with a sensing element incorporating premier technical ceramics
- Optimizes emissions and fuel economy
Read 1 review(s)Review snapshot ® by PowerReviews
-
overall good product
overall good product
Submitted 2012-11-02
By rjz
From norcross, GA
Good product overall.
Bottom Line recommended
from $105.99
View Product -
Bosch - Oxygen Sensor (Part No. 12105)
DescriptionBosch leads the way in oxygen sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.
Product Features:- Double laser-welded stainless steel body protects against contamination
- Seared protection tube due to 100% functional quality test
- Pre-coated threads with anti-seize compound right out of the box
- True Direct-fit OE connectors and harness
- Performance meets or exceeds OE specifications
Read 1 review(s)Review snapshot ® by PowerReviews
-
OXY Sensor
OXY Sensor
Submitted 2010-08-21
By Darsdad
From Pataskala, Ohio
Easy to install and priced right. [...]
Bottom Line recommended
from $71.99
View Product -
Bosch - Oxygen Sensor (Part No. 15733)
DescriptionBosch leads the way in oxygen sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.
Product Features:- Our premium oxygen sensors are designed to improve fuel economy while reducing harmful emissions
- Patented SmartLink connector system
- No special tools required for installation
- Sealed protection tube due to 100% functional quality test
- Performance meets or exceeds OE specifications
Read 3 review(s)Review snapshot ® by PowerReviews
-
Oxy sensor for OBD II code P0134
Oxy sensor for OBD II code P0134
Submitted 2019-02-23
By James
From Undisclosed
This sensor fit for bank 1 sensor 1. There are 2 sensor. It has a connector.
Bottom Line
-
.
.
Submitted 2019-01-26
By KEITH
From Undisclosed
Had to wire in. Not fun
Bottom Line
-
Wrong size again
Wrong size again
Submitted 2019-01-21
By Betty
From Undisclosed
Does not fit my car. Second one that stated perfect match but does not work.
Bottom Line
from $72.99
View Product -
Denso - Oxygen Sensor 4 Wire, Direct Fit, Heated, Wire Length: 23.23 (Part No. 234-4626)
DescriptionDENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO's exclusive aluminum oxide trap
Product Features:- Specifically designed to meet the increasing demands of today's engines
- 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle's fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
Read 3 review(s)Review snapshot ® by PowerReviews
-
Be sure to match plug configuration before purchasing
Be sure to match plug configuration before purchasing
Submitted 2018-11-28
By Tim
From Undisclosed
This apparently is not a direct fit on all Toyota Camry 4 cylinder applications. The plug is incorrect and obviously is not a direct fit.
Bottom Line
-
I will not recommend this product
I will not recommend this product
Submitted 2018-04-06
By Hanuman
From undisclosed
This product did not fit my 1998 Toyota Camry. Even the package did not have denso name on it
Bottom Line
-
Works well
Works well
Submitted 2016-11-09
By 383 stroker camaro
From Every race track near you
Have had the sensor in the car about a week works well as expected against the wood you can buy this one in confidence
Bottom Line recommended
from $101.99
View Product -
Bosch - Oxygen Sensor (Part No. 13354)
DescriptionBosch leads the way in oxygen sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.
Product Features:- Double laser-welded stainless steel body protects against contamination
- Seared protection tube due to 100% functional quality test
- Pre-coated threads with anti-seize compound right out of the box
- True Direct-fit OE connectors and harness
- Performance meets or exceeds OE specifications
Read 3 review(s)Review snapshot ® by PowerReviews
-
Not The exact fit
Not The exact fit
Submitted 2016-10-09
By Scott the wrench
From Lancaster Pennsylvania
The product said it was an exact fit to my car got it home went to plug it in it was not an exact fit plug did not work had to return it
Bottom Line not recommended
-
Do NOT buy for 99 Toyota Camry
Do NOT buy for 99 Toyota Camry
Submitted 2013-01-02
By Jay
From Derby CT
If you need to replace the sensor in your 99 Toyota Camry do NOT buy this part. The guy said it would fit and when I got home the original gray connector had a single bar going down one of the sides. This one has the two.
Bottom Line
-
I WOULD BUY AGAIN
I WOULD BUY AGAIN
Submitted 2011-03-07
By busman
From Auburn NY
Great Product!!!!
Bottom Line recommended
from $44.49
View Product -
Denso - Oxygen Sensor 4 Wire, Universal, Heated, Wire Length: 11.77 (Part No. 234-4209)
DescriptionDENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO's exclusive aluminum oxide trap
Product Features:- Specifically designed to meet the increasing demands of today's engines
- 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle's fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
Read 3 review(s)Review snapshot ® by PowerReviews
-
Overpriced
Overpriced
Submitted 2018-09-19
By Andrew
From GA
This is sold elsewhere for less than half this price.
Bottom Line not recommended
-
Denso Universal o2 sensor for Scion/Toyota installation
Denso Universal o2 sensor for Scion/Toyota installation
Submitted 2017-02-25
By StreetBeater
From Portsmouth, NH
For Scion/Toyota splice the sensor's two black wires to the two white Scion plug wires. It doesn't matter which of the two are connected since polarity is not an issue for the heat element. With two wires left to splice we have a 50% chance for success. lol The sensor ground wire is white and Scion/toyota use color gray for grounds. connect white to gray leaving the sensor sending wire blue to be connected to the Scion/Toyota black wire from the plug. The result should be no check engine light and a better running fuel mixture. Thanks and good luck
Bottom Line recommended
-
Saved money
Saved money
Submitted 2016-09-22
By Doug
From Illinois
I used the sensor tool kit available in advance store, and really needed it.
Bottom Line recommended
from $70.99
View Product -
Denso - Oxygen Sensor 4 Wire, Direct Fit, Heated, Wire Length: 33.07 (Part No. 234-4603)
DescriptionDENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO's exclusive aluminum oxide trap
Product Features:- Specifically designed to meet the increasing demands of today's engines
- 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle's fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
Read 2 review(s)Review snapshot ® by PowerReviews
-
PERFECT FIT
PERFECT FIT
Submitted 2012-12-14
By BILLY
From NEWPORT NEWS VA
THE PART FIT EXACTLY AND CORRECTED MY CHECK ENGINE LAMP.
Bottom Line recommended
-
Wrong Application For My 03 Camry
Wrong Application For My 03 Camry
Submitted 2011-09-22
By blm
From Pittsburgh PA
Posted another review that was 100% accurate and painted Advance in not such a flattering light however they wouldn't post that review. I guess you could call it selective censorship. Bottom line after acquiring this sensor found out it is not correct for my 03 Camry as it is listed for on Advance website. Talked to tech people at Denso and they confirmed that info.Would believe it is a good sensor when applied correctly.
Bottom Line not recommended
from $101.99
View Product -
Denso - Oxygen Sensor 4 Wire, Direct Fit, Heated, Wire Length: 14.8 (Part No. 234-4051)
DescriptionDENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO's exclusive aluminum oxide trap
Product Features:- Specifically designed to meet the increasing demands of today's engines
- 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle's fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
Read 1 review(s)Review snapshot ® by PowerReviews
-
proper part for toyotas
proper part for toyotas
Submitted 2011-03-22
By capt
From edgewater,MD
it fit and did the job
Bottom Line recommended
from $70.99
View Product -
Denso - Oxygen Sensor 4 Wire, Direct Fit, Heated, Wire Length: 16.14 (Part No. 234-4624)
DescriptionDENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO's exclusive aluminum oxide trap
Product Features:- Specifically designed to meet the increasing demands of today's engines
- 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle's fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
Read 3 review(s)Review snapshot ® by PowerReviews
-
I would not buy from Advance Auto Parts again!!!!
I would not buy from Advance Auto Parts again!!!!
Submitted 2018-03-13
By Victor
From undisclosed
Item was said to be a perfect fit by Advance Auto Parts, but it was not. They would not accept the item back!!!!
Bottom Line
-
Didn't fit!
Didn't fit!
Submitted 2017-07-24
By JENNIFER
From undisclosed
it did not fit the car. was not the correct part as indicated on the website. going to have to exchange it
Bottom Line
-
Wrong O2 sensor sent store fixed
Wrong O2 sensor sent store fixed
Submitted 2014-06-03
By The Professor
From Raleigh, NC
Wrong O2 sensor (connector was different) was recommended (online chat) for my Camry, this was corrected efficiently at my local store but required an extra trip. The part seems high quality, fit perfectly, and was easily installed using a special socket purchased at my store. Thanks for saving me money and for the courteous in store service.
Bottom Line
from $91.99
View Product -
Denso - Oxygen Sensor 4 Wire, Direct Fit, Heated, Wire Length: 23.23 (Part No. 234-4623)
DescriptionDENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO's exclusive aluminum oxide trap
Product Features:- Specifically designed to meet the increasing demands of today's engines
- 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle's fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
from $101.99
View Product
Year Range for Toyota Camry
People also search Advance Auto for these popular years of Toyota Camry parts:
FAQs for Toyota Camry Oxygen Sensor Products
What are the most purchased Oxygen Sensor products for the Toyota Camry?
Out of 112 Oxygen Sensor products for the Toyota Camry, the most popular in our inventory are: