Toyota 4Runner Air Suspension and Kits

Shock Kit

The yaw rate sensor is part of the stability control system which works in conjunction with the anti-lock brake system. The sensor measures the lateral movement of the vehicle, should the vehicle begin to move in a sideways direction, the anti-lock brake system will operate the brake system in a manner which may avoid a loss of vehicle control.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
• Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
• Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
• Where applicable electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

Timbren suspension enhancement system The decision is easy, Timbren suspension kits (SES kits) are designed to enhance the suspension of your vehicle. Improve load handling haul heavy loads with ease eliminate sag and sway.

Product Features:

• Eliminate Suspension Sag: When Towing A Heavy Trailer, Timbren SES Extends The Life Of The Suspension Of Your Vehicle And Helps To Avoid Bottoming Out
• Control Trailer Sway: A Condition Which Occurs With Unbalanced Loads, In Crosswinds Or When Passing Heavy Trucks Timbren SES Stabilizes Your Vehicle
• Control Body Roll: During Cornering With Powerful Progressive Rate Rubber Springs Which Resist Lean And Enhance Vehicle Stability
• Improve The Ride: By Allowing The Aeon(R) Rubber Springs Absorb Road Shocks And Bumps. Towing A Trailer Doesn’t Have To Mean Poor Ride Quality
• Economical And Trouble Free
• Simple And Easy To Install

Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
• Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
• Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

SuspAirBag/Bellows

CONTROL 2.0" Leveling Kit, Red

Discover the difference Coil Rite air helper springs can make in improving the ride, handling and braking of your vehicle. Coil Rite air helper springs provide extra support for coil springs in cars, minivans, vans, light trucks, RVs and SUVs. The adjustable Coil Rite air helper springs will level your vehicle, provide a smoother ride, and assist with more effective braking and handling, even under heavy loading and adverse road conditions. Coil Rite air helper springs are designed to fit inside existing coil spring suspensions, creating a variable rate spring. These air helper springs are made of durable, elastic polyurethane, providing years of comfort and stability to your vehicle. Firestone Coil Rite air helper springs enable adjustment for varying loads and road conditions by controlling the air pressure in the air helper springs. Spring performance can be altered as easily as inflating a tire. The air springs will support 500 To 1000 Pounds per set.

Product Features:

• Made Of Durable Polyurethane To Withstand The Rigors Of Coil-Sprung Suspensions
• Increase Vehicle Stability Absorbs Road Shock Providing A Smooth Ride For Passengers And Load
• Keep The Vehicle Level, Improves Steering Control And Braking Effectiveness, Levels Headlight Beams And Reduces Tire Wear
• Reduce Bottoming Out Protective Air Cushion Softens Contact Between The Axle And Frame
• Discover The Difference Coil Rite Air Helper Springs Can Make In Improving The Ride, Handling And Braking Of Your Vehicle
• No Drill Installation
• Everything Is Included For A Quick, Easy Installation. Brackets, Air Springs, Hardware, Air Line, And Separate Valves For Manual Inflation

AISIN’s OE Engineered and Manufactured Ride Height Sensor Assemblies serve as direct replacements and come with Mechanical Linkage Arms. The assembly features both the sensor and an adjustable or non-adjustable linkage arm. It continuously sends electrical signals to the computer, ensuring proper headlight alignment and maintaining the correct suspension height.

Product Features:

• Assembly includes sensor and linkage arm (adjustable or non¿adjustable).
• Sends continuous electric signals to the computer.
• Maintains the correct headlight alignment and/or suspension height.

AISIN’s OE Engineered and Manufactured Ride Height Sensor Assemblies serve as direct replacements and come with Mechanical Linkage Arms. The assembly features both the sensor and an adjustable or non-adjustable linkage arm. It continuously sends electrical signals to the computer, ensuring proper headlight alignment and maintaining the correct suspension height.

Product Features:

• Assembly includes sensor and linkage arm (adjustable or non¿adjustable).
• Sends continuous electric signals to the computer.
• Maintains the correct headlight alignment and/or suspension height.

AIR SUSPENSION SPRNG

Autotecnica offers high-quality aftermarket parts for a wide variety of Asian and North American passenger cars and trucks, include braking, cooling, driveline, electrical, engine, fuel, HVAC, steering, and suspension categories. Manufactured in strict accordance with ISO/TS 16949 QMS specifications, Autotecnica is the smart choice. Whether you’re a DIY enthusiast or professional technician in need of replacement parts that meet OEM specifications, Autotecnica is an excellent alternative to expensive ¿Genuine¿ components.

Product Features:

• Guaranteed fitment
• Helps smooth ride and reduce clunking on rough roads
• Maintenance-free air spring equals or exceeds OE performance for proper vehicle stability
• Helps restore original leveling, ride height, and load bearing capability
• Quality materials deliver smooth performance and resist wear for maximum lifespan
• OE-style attachment points and air line connection for easy installation

Quick Strut Kit

This air suspension compressor is designed to match the fit and function of the original compressor on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

• Direct replacement – this air suspension compressor is designed to match the fit and function of the original compressor on specified applications
• Ideal solution – this compressor is a reliable replacement for an original part that has failed due to fatigue, moisture infiltration or burnout
• Durable construction – this part is made from quality materials to ensure reliable performance and a long service life
• Trustworthy quality – designed in the United States and backed by more than a century of automotive aftermarket excellence

Arnott’s air suspension compressor P-3192 for the 2003-2009 Toyota 4Runner and Lexus GX 470 is a 100% direct replacement for the original OE compressor from Toyota. This genuine Toyota Air Suspension Compressor is new and is produced by the same manufacturer as the original compressor. The compressor comes complete with a mounting bracket, electrical connectors and relay for a fast plug and play installation. The most common cause of compressor failure is a leak in the air suspension system such as the rubber air springs. Arnott recommends that you check the vehicle’s air suspension system for any leaks to maintain your warranty and for optimum compressor performance.

Product Features:

• Exclusively for the Toyota 4Runner (N210) /Lexus GX470 (J120)
• Produced by OE Compressor Manufacturer
• Minimum Noise and Vibration
• Includes New Relay

With over 40 years of history, Nolathane remains the number 1 replacement and enhancement bushing and chassis component brand throughout Australia & New Zealand and now boasts a warehouse in California & catalog to suit the North American market.

Product Features:

• Internal grease reservoirs provide continual self lubrication for optimum friction management
• Designed with the installer in mind by reducing the need of specialized skills, tools and equipment
• Kit Contains: 77 bushings, 34 Tubes, 4 Plates, 43 Washers, Grease, Install Guide
• Nolathane formulation boasts resistance to oil, grease, ozone and weathering

Energy’s Hyper-Flex is superior performance polyurethane which has proven itself under the most demanding conditions on the race track, off-road and street performance driving, Hyper-Flex components do not wear or deteriorate from exposure to undercar chemicals such as oils and coolants and withstand atmospheric conditions like UV exposure and pollutants. Impervious to these elements, Energy’s Hyper-Flex components are a great value. Not only will it outlast rubber 5 to 1 but are a cost effective performance improvement for your car or truck. Whether domestic or import, front, rear or 4WD, old or new, your vehicle will achieve that level of performance that has made Energy Suspension the most asked-for name in performance polyurethane components. All Hyper-Flex components are proudly Made in America and are available in red or black.

Product Features:

• Incredible Improvement In Control
• Maintains Proper Caster And Camber Alignment
• Increase In Handling And Control
• Greatly Reduce Wheel Hop On Quick Acceleration
• Even Braking Control Is Improved
• Better Suspension Stability

SuspAirBag/Bellows

SuspAirBag/Bellows

SuspAirBag/Bellows

Our Air Command systems give customers the ability to conveniently adjust their air springs with the touch of a button thanks to our Air Command Air Compressor Kits. Our designs provide an instant air source to a vehicle air suspension system, giving users the freedom to adjust their air springs to accommodate different loads and road conditions from both inside and outside of the vehicle.

Product Features:

• The Easy To Read Digital Display Is Designed So You Can See It During The Day, But It Does Not Blind You At Night
• The Wireless Remote Utilizes A New Sleep Cycle And LED Display That Reduces Energy Use And Improves Battery Life
• Easy Installation

KYB Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Strut Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB Strut Mounts and bearing plates have a reputation for providing the highest quality in the industry.

Product Features:

• The Highest Quality Replacement Strut Mount Available
• Optimizes Suspension Performance By Offering Original Equipment Quality Replacement Components Designed For Each Application
• Superior Rubber Reduces Noise, Vibration And Harshness
• Mount Bearings Provide Smoother Steering And Help Retain Front End Alignment
• Matched Grade Studs And Nuts

Valvoline DEX/MERC ATF is a high-quality transmission fluid formulated to meet the challenging demands of many automatic transmissions. Its responsive low-temperature fluidity is beneficial in both electronic and hydraulic controlled transmissions and transaxles. Recommended for use in the following applications: MERCON*, DEXRON*-III, Ford M2C138-CJ and M2C166-H, Allison C-4 and TES-389, and Caterpillar TO-2.

Product Features:

• Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
• Enhanced anti-shudder protection for smooth shifting and maximum power transfer
• Developed with anti-wear technology to help improve transmission durability
• Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

Valvoline ATF for MERCON V Applications is a high-quality transmission fluid meeting and exceeding the requirements of the Ford Mercon V specification which covers most Ford passenger cars and light-duty trucks (except those specifying MERCON SP, MERCON LV, MERCON ULV or Type F fluids), including Lincoln and Mercury, as well as most pre-2006 GM vehicles and many imports. Recommended for use in the following applications: MERCON V, MERCON, DEXRON-III, DEXRON-II, Caterpillar TO-2, Allison C-4. Other applications include Power steering fluid where a DEXRON or MERCON fluid is recommended. Suitable to use in Nissan Matic D, Matic J and Matic K.

Product Features:

• Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
• Enhanced anti-shudder protection for smooth shifting and maximum power transfer
• Developed with anti-wear technology to help improve transmission durability
• Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures