Tesla X Steering and Chassis Parts

This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:

• Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
• Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
• Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
• Durably designed – additional coatings offer long-lasting rust and corrosion resistance

On certain Tesla Model X SUVs, the front upper right control arm can crack and separate from the steering knuckle, often without warning and under normal driving conditions. This can cause a sudden and unexpected loss of steering control. The original equipment design also uses a plastic cap over the ball joint that tends to trap moisture accumulation. That can cause an increasingly frequent creaking sound in the vehicle’s front end and ultimately cause the joint to fail. This Dorman OE FIX upper front suspension control arm and ball joint assembly addresses these costly and dangerous potential failure points so vehicle owners can opt for a more permanent repair than offered by the factory design. Unlike the Tesla plastic arm assembly, our upgraded arm design prevents stress cracks and knuckle separation by utilizing a much stronger forged steel ball joint housing with a stamped steel arm attached by sturdy rivets. To help prevent damaging corrosion and moisture intrusion, this design eliminates the plastic cap to allow water to evaporate, the arm is electrostatically coated. and the ball joint is protected by a completely sealed housing. Precision engineered and manufactured to help provide many miles of reliable service, this improved control arm assembly is designed to exactly match the fit of the factory assembly, but far exceed its performance and durability.

Product Features:

• Upgraded design – this front upper right control arm assembly features a forged steel housing and sealed ball joint designed to provide greater strength and reliability than the factory assembly
• Stronger arm – unlike the Tesla fiber-reinforced plastic design arm assembly, this control arm is a much stronger forged steel insert riveted to a stamped steel control arm
• Water resistant – to help prevent moisture intrusion that causes the OE ball joint to creak and fail, the ball joint is protected by a completely sealed housing
• Better repair – this improved control arm assembly is engineered by the aftermarket leader in suspension components to match the fit of the factory assembly but exceed OE performance and durability

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

• HARDENDED TO MAXIMIZE STRENGTH – Studs are induction hardened to maximize strength, resist breakage and improve fatigue life
• HARDENDED TO MAXIMIZE STRENGTHá-áStuds are induction hardened to maximize strength, resist breakage and improve fatigue life
• KEEPS DIRT AND WATER OUT – Pre- installed dust boot seal provides an effective barrier against water- causing contaminants
• KEEPS DIRT AND WATER OUT – Pre- installed dust bootáseal provides an effective barrier againstáwater- causing contaminants
• PREMIUM BUSHINGS – Pre-installed with optimized stiffness to inhibit noise for a comfortable ride
• HARDWARE INCLUDED – Comes with all necessary hardware for easy, fast installation
• ENHANCED STRUCTURAL STRENGTH – Material and heat treatment are carefully selected to meet application requirements
• EASY TO INSTALL – Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box

This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:

• Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
• Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
• Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
• Durably designed – additional coatings offer long-lasting rust and corrosion resistance

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

• CARBON FIBER BEARINGS — Induction-hardened studs for added strength, combined with a patent-pending carbon fiber-reinforced bearing, reduces socket friction compared to typical non-reinforced bearings for longer socket life
• HARDENDED TO MAXIMIZE STRENGTH — Studs are induction hardened to maximize strength, resist breakage and improve fatigue life
• HARDENDED TO MAXIMIZE STRENGTHá–áStuds are induction hardened to maximize strength, resist breakage and improve fatigue life
• KEEPS DIRT AND WATER OUT — Pre-installed dust boot seal provides an effective barrier against wear-causing contaminants
• KEEPS DIRT AND WATER OUT — Pre-installed dust bootáseal provides an effective barrier againstáwear-causing contaminants
• PREMIUM BUSHINGS — Pre-installed with optimized stiffness to inhibit noise for a comfortable ride
• HARDWARE INCLUDED — Comes with all necessary hardware for easy, fast installation
• ENHANCED STRUCTURAL STRENGTH ¿ Material and heat treatment are carefully selected to meet application requirements
• ENHANCED STRUCTURAL STRENGTH ┐ Material and heat treatment are carefully selected to meet application requirements
• EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box

This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:

• Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
• Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
• Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
• Durably designed – additional coatings offer long-lasting rust and corrosion resistance

Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability.  Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications.  Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and  perform the way professional technicians demand.

Product Features:

• OE matched design for Form, Fit, and Function
• Advanced corrosion-resistant electro-coating to reduce rust
• Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
• Hex formed studs &/or wrench flats for ease of installation
• Hardware included for easier installation (where applicable)

Not many enthusiasts are aware that OEM and more importantly aftermarket sway bar effectiveness can be hindered by worn or inadequate mounts, drop links and lateral stoppers. Whiteline adjustable sway bar links are engineered to be up to the task with top spec, light weight componentry combined with a window of adjustability, eliminating sway bar preload on installation but most importantly ensuring the maximum output of the sway bar for improved grip and better handling.

Product Features:

• By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
• Eliminate sway bar preload during installation and allow for on-car length adjustment of up to 25mm centre to centre.
• Heavy duty ball joints adjust and rotate to any angular combination for ease of fitment and optimum performance.

Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability.  Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications.  Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and  perform the way professional technicians demand.

Product Features:

• OE matched design for Form, Fit, and Function
• Advanced corrosion-resistant electro-coating to reduce rust
• Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
• Hex formed studs &/or wrench flats for ease of installation
• Hardware included for easier installation (where applicable)

Backed by superior materials and rigorous testing, MOOG outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.?

Product Features:

• EASY TO INSTALL — Wrench flats on housing and stud provide easy installation and alignment adjustment
• RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
• COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
• ENGINEERING EXCELLENCE — With 50+ dedicated engineers and 50+ patents, MOOG engineers every part with purpose
• RESTORES RIDE — Provides revamped steering and handling feel