Suzuki Sidekick Lower Radiator Hose

Lower Radiator Hose for a Suzuki Sidekick

Use the fitment form at the top of the page to select your exact year and engine type for your Suzuki Sidekick.

• 

  Dayco - Curved Radiator Hose (Part No. C71588)

  Description

  Dayco Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.
  
  Product Features:

  • Made with synthetic EPDM rubber compounds that provide resistance to deterioration from ozone, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C)
  • The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose
  • Meets SAE J20R4, Class D-1 requirements for improved service hose
  • Meets Type EC electro-chemical requirements as specified in SAE J1684; which eliminates premature deterioration of the inner tube caused by the build up of static electric charges

  5.0

  Read 1 review(s)

  Review snapshot ® by PowerReviews

  5.0

  5.0

  • 5

    5

    2020-09-12

    5

    5

    I would buy again

    I would buy again

    Submitted 2020-09-12

    By Ahmed

    From Undisclosed

    Easy installation

    Bottom Line NULL

    Easy installation

    By Ahmed from Undisclosed

    BOTTOM LINE NULL

  from $19.99

  View Product
• 

  Dayco - Curved Radiator Hose (Part No. B70827)

  Description

  Dayco Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.
  
  Product Features:

  • Made with synthetic EPDM rubber compounds that provide resistance to deterioration from ozone, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C)
  • The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose
  • Meets SAE J20R4, Class D-1 requirements for improved service hose
  • Meets Type EC electro-chemical requirements as specified in SAE J1684; which eliminates premature deterioration of the inner tube caused by the build up of static electric charges

  5.0

  Read 3 review(s)

  Review snapshot ® by PowerReviews

  5.0

  5.0

  • 1

    1

    2022-04-25

    1

    1

    This hose did not fit as described

    This hose did not fit as described

    Submitted 2022-04-25

    By Justin

    From Fort wayne Indiana

    This radiator hose is routed through a very congested area of the engine bay and is not an easy task as most radiator hoses are. This was extremely frustrating as the hose was too short and was not able to verify until in place. Had to remove, and replace with a different brand.

    Bottom Line not recommended

    This radiator hose is routed through a very congested area of the engine bay and is not an easy task as most radiator hoses are. This was extremely frustrating as the hose was too short and was not able to verify until in place. Had to remove, and replace with a different brand.

    By Justin from Fort wayne Indiana

    BOTTOM LINE not recommended

  • 5

    5

    2021-12-05

    5

    5

    It's a must, especially if you're doing an alternator.

    It's a must, especially if you're doing an alternator.

    Submitted 2021-12-05

    By Jomama

    From Sunshine State

    I walked in and picked up my parts, and was out in a flash.

    Bottom Line recommended

    I walked in and picked up my parts, and was out in a flash.

    By Jomama from Sunshine State

    BOTTOM LINE recommended

  • 5

    5

    2021-11-22

    5

    5

    Lower Radiator hose

    Lower Radiator hose

    Submitted 2021-11-22

    By Dave

    From Colorado Springs, Colorado

    So far, so good. Fit perfect and it doesn't leak.

    Bottom Line recommended

    So far, so good. Fit perfect and it doesn't leak.

    By Dave from Colorado Springs, Colorado

    BOTTOM LINE recommended

  from $12.79

  View Product
• 

  Dayco - Molded Radiator and Bypass Hose (Part No. G2020568193DAY)

  Description

  Designed to replace original equipment manufacturer hose, Dayco Molded Radiator and Bypass Hose are built with knitted reinforcement and EPDM construction which provides high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40F (-40C) to +257F (+125C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. The Dayco Molded Radiator and Bypass Hose has a convenient plastic hang strap for quick and easy merchandising. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro- chemical requirements as specified in SAE J1684.
  
  Product Features:

  • Made with synthetic EPDM rubber compounds that provide resistance to deterioration from ozone, coolants, and temperature variations of -40F (-40C) to +257F (+125C)
  • The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose
  • Meets SAE J20R4, Class D-1 requirements for improved service hose
  • Meets Type EC electro-chemical requirements as specified in SAE J1684; which eliminates premature deterioration of the inner tube caused by the build up of static electric charges

  5.0

  Read 2 review(s)

  Review snapshot ® by PowerReviews

  5.0

  5.0

  • 5

    5

    2020-11-09

    5

    5

    I bout two

    I bout two

    Submitted 2020-11-09

    By Jeremy

    From Undisclosed

    Good quality for a Frontier

    Bottom Line NULL

    Good quality for a Frontier

    By Jeremy from Undisclosed

    BOTTOM LINE NULL

  • 5

    5

    2016-10-16

    5

    5

    Just Like OEM

    Just Like OEM

    Submitted 2016-10-16

    By Dan

    From Huntsville, AL

    Better than the flexible hoses for an OEM type fit in hard to reach places.

    Bottom Line recommended

    Better than the flexible hoses for an OEM type fit in hard to reach places.

    By Dan from Huntsville, AL

    BOTTOM LINE recommended

  from $13.31

  View Product
• 

  Dayco - Curved Radiator Hose (Part No. D70808)

  Description

  Dayco Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.
  
  Product Features:

  • Made with synthetic EPDM rubber compounds that provide resistance to deterioration from ozone, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C)
  • The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose
  • Meets SAE J20R4, Class D-1 requirements for improved service hose
  • Meets Type EC electro-chemical requirements as specified in SAE J1684; which eliminates premature deterioration of the inner tube caused by the build up of static electric charges

  3.0

  Read 2 review(s)

  Review snapshot ® by PowerReviews

  3.0

  3.0

  • 5

    5

    2017-12-23

    5

    5

    Perfect fit for 1979 MGB

    Perfect fit for 1979 MGB

    Submitted 2017-12-23

    By MGB Al

    From Arlington, TX

    This hose comes longer than needed for my car, you just cut it to length along the straight section. Then it fits perfectly. Remember that this the Upper hose, not lower.

    Bottom Line recommended

    This hose comes longer than needed for my car, you just cut it to length along the straight section. Then it fits perfectly. Remember that this the Upper hose, not lower.

    By MGB Al from Arlington, TX

    BOTTOM LINE recommended

  • 1

    1

    2011-05-10

    1

    1

    Wrong hose for an MGB

    Wrong hose for an MGB

    Submitted 2011-05-10

    By TheCapnVideo

    From 01331

    Do not buy for an MGB it is not the correct lower heater hose.

    Bottom Line not recommended

    Do not buy for an MGB it is not the correct lower heater hose.

    By TheCapnVideo from 01331

    BOTTOM LINE not recommended

  from $12.99

  View Product
• 

  Dayco - Curved Radiator Hose (Part No. B71277)

  Description

  Dayco Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.
  
  Product Features:

  • Made with synthetic EPDM rubber compounds that provide resistance to deterioration from ozone, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C)
  • The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose
  • Meets SAE J20R4, Class D-1 requirements for improved service hose
  • Meets Type EC electro-chemical requirements as specified in SAE J1684; which eliminates premature deterioration of the inner tube caused by the build up of static electric charges

  1.0

  Read 2 review(s)

  Review snapshot ® by PowerReviews

  1.0

  1.0

  • 1

    1

    2020-05-20

    1

    1

    Do not buy

    Do not buy

    Submitted 2020-05-20

    By Justino

    From Undisclosed

    This lower radiator hose did not fit a 2005 Honda CR-V.

    Bottom Line NULL

    This lower radiator hose did not fit a 2005 Honda CR-V.

    By Justino from Undisclosed

    BOTTOM LINE NULL

  • 1

    1

    2020-05-20

    1

    1

    Did not fit

    Did not fit

    Submitted 2020-05-20

    By Justino

    From Undisclosed

    Could not use this lower radiator hose. Did not fit a 2005 Honda CR-V

    Bottom Line NULL

    Could not use this lower radiator hose. Did not fit a 2005 Honda CR-V

    By Justino from Undisclosed

    BOTTOM LINE NULL

  from $12.99

  View Product
• 

  Dayco - Flex Radiator Hose, Standard (Part No. 81021)

  Description

  Precision molded in standard lengths, Dayco's Flex Radiator Hose is designed to replace straight or molded radiator hoses. The knitted reinforcement and synthetic EPDM construction meets SAE J20R4, Class D-2 requirements. This hose is designed to prevent splitting, ballooning, and elongation; and, resists ozone and other detrimental environmental elements, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). The corrugations provide excellent hose flexibility without flattening or collapse.Note: This hose is NOT suitable for fuel or oil transfer.
  
  Product Features:

  • The knitted reinforcement and synthetic EPDM construction meets SAE J20R4, Class D-2 requirements
  • Resists ozone and other detrimental environmental elements, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C)
  • The corrugations provide excellent hose flexibility without flattening or collapse
  • This hose is designed to prevent splitting, ballooning, and elongation

  from $12.49

  View Product