Suzuki Samurai Oil and Lubricants

Essential Suzuki Samurai Oil and Lubricants

Quaker State – 10W-40 Conventional Motor Oil, Reduces Engine Wear, 1 Quart (Part No.550034964)

10W-40 Conventional Motor Oil, Reduces Engine Wear, 1 Quart

from

$6.29
Quaker State 10W-40 conventional motor oil helps engines survive daily commutes from high-speed highway operation to repetitive, stop-and-go driving. It maintains the required viscosity from start to finish, providing optimal protection. Quaker State Motor Oil combats engine sludge and deposits, providing rust protection from harmful acids generated by engine contaminants. It reduces engine wear, providing durable wear protection. Quaker State 10W-40 Motor Oil exceeds the requirements of the following industry specifications: API SN and all previous categories. For a full list of equipment approvals and recommendations, please consult your local Quaker State Technical Help Desk and always consult your owners manual.

Product Features:
  • Conventional 10W-40 that provides durable wear protection and reduces engine wear
  • Provides corrosion protection against harmful acids generated by engine contaminants
  • Maintains viscosity from start to finish, providing optimal oil film protection
  • Helps engines survive daily commutes from high-speed highway operation to repetitive, stop-and-go driving
  • Combats engine sludge and deposits
  • Formulated to exceed the requirements of industry specification API SN and all previous categories
  • Formerly known as Quaker State Advanced Durability 10W-40 motor oil
  • Rust Protection: Provides rust protection from harmful acids generated by engine contaminants, extending the life of your engine.
See More

Yukon Gear – Friction Modifier / Posi Additive (Part No.15018)

Friction Modifier / Posi Additive

from

$17.99
Help keep positraction chatter down with posi additive from Yukon Gear & Axle.

Product Features:
  • positraction additive
  • For use in any clutch-style limited slip
See More

Mobil 1 – 10W-40 High Mileage Full Synthetic Engine Oil, 1 Quart (Part No.14993)

10W-40 High Mileage Full Synthetic Engine Oil, 1 Quart

from

$12.49
Give your higher mileage engine the care it deserves with Mobil 1 High Mileage full-synthetic motor oil 10W-40. This formula utilizes Mobil 1’s signature Triple Action Formula to deliver outstanding engine performance, protection, and cleanliness to vehicles with over 75,000 miles. Mobil 1 High Mileage motor oil extends engine life by reducing friction and preventing deposits and sludge buildup, keeping critical engine parts clean and protected for up to 10,000 miles between oil changes. (1) Mobil 1 helps to keep your engine running at lower temperatures (2) and is proven to cool engine temperatures by over 10%. (3) Mobil 1 High Mileage full-synthetic motor oil 10W-40 also helps control oxidation to prevent oil breakdown and is recommended by ExxonMobil for all types of modern cars, SUVs, light vans, and light trucks, including those with high-performance, turbocharged, supercharged, multi-valve, or fuel-injected engines. Mobil 1 is America’s #1 selling synthetic motor oil brand at retail, (4) trusted and recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR. ( (1) Protects for up to 10,000 miles or 1 year, whichever comes first. To learn more about the Mobil 1 Limited Warranty, visit Mobil.US. (2) Compared to conventional oil. (3) Based on proprietary engine testing¿results may vary. (4) Source: The NPD Group/ Retail Tracking Service/ Dollar Sales/ PCMO full-synthetic/ 52 weeks ending Feb 25, 2023)

Product Features:
  • Mobil 1 high mileage full-synthetic engine oil 10w-40 is designed for engines with over 75,000 miles to go up to 10,000 miles between oil changes. (1)
  • Utilizes Mobil 1’s signature triple action formula to deliver outstanding engine performance, protection, and cleanliness
  • Meets ilsac gf-6 standards to help provide low-speed pre-ignition (lspi) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy
  • Provides excellent internal engine heat protection (up to 500 degrees f) and low temperature protection (to -30 degrees f)
  • Mobil 1 is specially formulated to help remove sludge and lower engine temperatures
  • Manufacturer part number: 103536
See More

Yukon Gear – 3 Qt – Penzoil 80W90 Conventional Gear Oil (Part No.15002)

3 Qt - Penzoil 80W90 Conventional Gear Oil

from

$44.99
3 Qt. Penzoil 80W90 conventional gear Oil.

Product Features:
  • Includes three quarts of conventional oil
See More

Quaker State – 10W-40 Motor Oil 5 Quart (Part No.550044961)

10W-40 Motor Oil 5 Quart

from

$34.99
Quaker State 10W-40 conventional motor oil helps engines survive daily commutes from high-speed highway operation to repetitive, stop-and-go driving. It maintains the required viscosity from start to finish, providing optimal protection. Quaker State Motor Oil combats engine sludge and deposits, providing rust protection from harmful acids generated by engine contaminants. It reduces engine wear, providing durable wear protection. Quaker State 10W-40 Motor Oil exceeds the requirements of the following industry specifications: API SN and all previous categories. For a full list of equipment approvals and recommendations, please consult your local Quaker State Technical Help Desk and always consult your owner’s manual.

Product Features:
  • Conventional 10W-40 that provides durable wear protection and reduces engine wear
  • Provides corrosion protection against harmful acids generated by engine contaminants
  • Maintains viscosity from start to finish, providing optimal oil film protection
  • Helps engines survive daily commutes from high-speed highway operation to repetitive, stop-and-go driving
  • Combats engine sludge and deposits
  • Formulated to exceed the requirements of industry specification API SN and all previous categories
  • Formerly known as Quaker State Advanced Durability 10W-40 motor oil
See More

Valvoline – Flex Fill Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Quart (Part No.889785)

Flex Fill Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Quart

from

$18.99
We’ve squeezed innovation into every ounce of Valvoline FlexFill SAE 75W-90 Full Synthetic Gear Oil, the ultimate gear protection in hypoid rear differentials and non-synchronized manual transmissions. Our unique new flexible pouch makes getting into the tightest places to lubricate gears easier than ever and with less waste. The superior detergent package-based formulation contains fully synthetic basestocks and special additives that help protect parts from rust and corrosion while providing exceptional high and low temperature protection and excellent thermal stability, especially in demanding driving situations such as towing and off-roading. It contains an extreme pressure additive for better load carrying capacity, wear resistance additives that assist in protecting gear teeth, a limited slip additive for optimal clutch pack performance, and an anti-foaming agent for better lubrication and service life. Valvoline FlexFill SAE 75W-90 Full Synthetic Gear Oil is recommended for use in axle applications requiring factory-fill or drain-and-fill levels for limited slip performance.

Product Features:
  • FLEXIBLE POUCH FOR EASIER USE WITH LESS WASTE in tight, hard to reach undercarriage situations
  • EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION ranging from -30F to 300F degrees for dependable coverage year-round
  • REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
  • MEETS THE DEMANDS OF CONVENTIONAL AND LIMITED SLIP REAR DIFFERENTIALS where API GL-5 is specified, as well as non-synchronized manual transmissions that require API GL-4 or MT-1 fluid
  • MEETS OR EXCEEDS PERFORMANCE REQUIREMENTS for Mack GO-H and GO-J; API GL-5 and API MT-1; MIL-PRF-2105E; and SAE J2360
See More

Valvoline – SynPower Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Gallon (Part No.882505)

SynPower Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Gallon

from

$59.99
Valvoline SAE 75W-90 Full Synthetic Gear Oil provides the ultimate gear protection in hypoid rear differentials and non-synchronized manual transmissions. Engineered to outperform, our detergent package-based formulation contains Full Synthetic basestocks and special additives that help protect parts from rust and corrosion while providing exceptional high and low temperature protection and excellent thermal stability, especially in demanding driving situations such as towing and off-roading. It contains an extreme pressure additive for better load carrying capacity, wear resistance additives that assist in protecting gear teeth, a limited slip additive for optimal clutch pack performance, and an anti-foaming agent for better lubrication and service life. Valvoline SAE 75W-90 Full Synthetic Gear Oil is recommended for use in axle applications requiring factory-fill or drain-and-fill levels for limited slip performance. Protect your gears with Valvoline, the #1 gear oil brand.

Product Features:
  • EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION , ranging from -30F to 300F degrees
  • REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
  • FIGHTS CORROSION AND RUST with emulsifying agents and safeguards against impurities, oxidation and thermal breakdown
  • MEETS THE DEMANDS OF CONVENTIONAL AND LIMITED SLIP HYPOID DIFFERENTIALS where APPI GL-5 is specified, as well as non-synchronized manual transmissions that require API GL-4 or MT-1 fluid
  • MEETS OR EXCEEDS THE PERFORMANCE REQUIREMENTS for Mack GO-H and GO-J; API GL-5 and API MT-1; MIL-PRF-2105E; and SAE J2360
See More

Valvoline – High Performance Transmission & Differential Gear Oil: Conventional 80W-90, 1 Quart (Part No.VV831)

High Performance Transmission & Differential Gear Oil: Conventional 80W-90, 1 Quart

from

$12.49
Valvoline High Performance Gear Oil is an extreme pressure gear lubricant formulated with quality base oils and superior additives that helps protect against severe temperatures, shock loads, scuffing, scouring, corrosion and pitting in high speed, high load, high torque and high horsepower conditions.

Product Features:
  • Formulated for reliable gear protection
  • Protects against severe temperatures to help extend service life
  • Formulated with extreme-pressure additives to minimize gear wear from shock loads
  • Helps protect against gear wear from scuffing, scouring, corrosion and pitting
  • Recommended for conventional hypoid differentials and non-synchronized manual transmissions in passenger cars, light trucks, sport utility vehicles, vans and heavy-duty trucks where an API-GL5 or GL-4 fluid is specified
  • PLEASE NOTE: Valvoline recommends SynPower Full Synthetic Gear Oil for limited slip differentials
See More

Castrol – EDGE 5W-30 Advanced Full Synthetic Motor Oil, 1 Quart (Part No.152C3C)

EDGE 5W-30 Advanced Full Synthetic Motor Oil, 1 Quart

from

$11.99
Castrol EDGE 5W-30 is an advanced full synthetic motor oil and the optimal choice for drivers who want the best combination of wear protection, viscosity control and thermal stability to maximize engine performance. It is one of Castrols strongest engine oils with the strength to maintain this unsurpassed level of engine protection for up to 20,000 miles between oil changes or one year.

Product Features:
  • 3X Stronger than the leading full synthetic (1)
  • 10X Better high stress performance (2)
  • 20,000 miles between oil changes (3)
  • (1) Viscosity breakdown as measured in Kurt Orbahn test on 5W-30 grade
  • (2) As measured in Seq IX test under high load/torque conditions vs. API SP test limits
  • (3) Or one year, whichever comes first
  • Approved and Licensed Specifications:
  • ACEA A5/B5, C2
  • Exceeds API SP/SN PLUS/SN/SM
  • GM dexos1 Gen 3
  • Meets engine test requirements of Chrysler MS 6395
  • Meets Ford WSS-M2C946-B1
  • Meets Ford WSS-M2C961-A1
See More

FRAM – Full Synthetic 10W-30 Motor Oil – Helps Extend Motor Life, 1 Quart (Part No.F940)

Full Synthetic 10W-30 Motor Oil - Helps Extend Motor Life, 1 Quart

from

$7.49
FRAM Engine Oil Full Synthetic SAE 10W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and the latest additive technology to provide the ultimate protection for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 10W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability over previous oil categories.

Product Features:
  • Outstanding thermal and oxidation stability
  • Excellent sludge and varnish protection
  • Faster oil flow at start-up
  • Volatility: lowers oil vaporization and consumption at extreme conditions
  • Always refer to your vehicles operating manual to select the correct grade oil for your engine.
  • Ultimate engine protection: FRAM Full Synthetic Oil 10W30 1 QT is specifically formulated with high-quality synthetic base stocks and advanced additive technology to provide the ultimate protection for your engine, ensuring its longevity and performance.
See More

Castrol – EDGE High Mileage 10W-30 Advanced Full Synthetic Motor Oil, 1 Quart (Part No.15979B)

EDGE High Mileage 10W-30 Advanced Full Synthetic Motor Oil, 1 Quart

from

$12.99
Castrol EDGE High Mileage 10W-30 is an advanced full synthetic motor oil that is specifically designed for vehicles with over 75,000 miles. It’s been engineered to reduce leaks, burnoff and power robbing deposits, but also contains a proprietary additive to protect the emission system. Our Phosphorus Replacement Technology reduces harmful phosphorus to protect the catalytic converter and extend maximum performance. It is the natural choice for drivers who demand maximum performance from their high mileage car.

Product Features:
  • Phosphorus Replacement Technology to help extend the life of the emission system
  • Reduces leaks, oil burnoff and power robbing deposits
  • 15,000 miles between oil changes (1)
  • (1) Or one year, whichever comes first
  • Meets or exceeds the following specifications:
  • API SP/SN PLUS/SN/SM
  • ILSAC GF-6
See More

Castrol – EDGE High Mileage 10W-30 Advanced Full Synthetic Motor Oil, 5 Quarts (Part No.15906F)

EDGE High Mileage 10W-30 Advanced Full Synthetic Motor Oil, 5 Quarts

from

$38.99
Castrol EDGE High Mileage 10W-30 is an advanced full synthetic motor oil that is specifically designed for vehicles with over 75,000 miles. It’s been engineered to reduce leaks, burnoff and power robbing deposits, but also contains a proprietary additive to protect the emission system. Our Phosphorus Replacement Technology reduces harmful phosphorus to protect the catalytic converter and extend maximum performance. It is the natural choice for drivers who demand maximum performance from their high mileage car.

Product Features:
  • Phosphorus Replacement Technology to help extend the life of the emission system
  • Reduces leaks, oil burnoff and power robbing deposits
  • 15,000 miles between oil changes (1)
  • (1) Or one year, whichever comes first
  • Meets or exceeds the following specifications:
  • API SP/SN PLUS/SN/SM
  • ILSAC GF-6
See More

Castrol – GTX 5W-20 Synthetic Blend Motor Oil, 5 Quarts (Part No.15A66C)

GTX 5W-20 Synthetic Blend Motor Oil, 5 Quarts

from

$9.99
Castrol GTX 5W-20 is a synthetic blend motor oil with a double-action formula proven to clean away the sludge that can block engine oilways (1) and help prevent new sludge formation. Sludge is a thick, tar like substance caused by severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals. Sludge can block your engine’s vital oilways like cholesterol and if untreated, can rob an engine of its power and ultimately its life. (1) When tested in engines with a high level of sludge

Product Features:
  • Premium-quality base oils and anti-wear additives that help extend engine life
  • Superior protection against engine sludge
  • Advanced protection against viscosity and thermal breakdown
  • Superior protection against high-temperature deposits
  • Meets or exceeds the following specifications:
  • API SP/SN PLUS/SN/SM
  • ILSAC GF-6
  • Meets or exceeds the following specifications:
  • Meets Ford WSS-M2C945-B1
  • Meets Ford WSS-M2C960-A1
See More

Castrol – GTX High Mileage 10W-30 Synthetic Blend Motor Oil, 1 Quart (Part No.149D6C)

GTX High Mileage 10W-30 Synthetic Blend Motor Oil, 1 Quart

from

$10.49
Castrol GTX High Mileage 10W-30 is the No. 1 consumer high-mileage brand of motor oil. It’s a synthetic blend engine oil that helps extend the life of engines by protecting against sludge, wear and burn-off. Engineered with Phosphorous Replacement Technology, it also protects emission systems by replacing some of the phosphorous that can damage catalytic converters.

Product Features:
  • Phosphorus Replacement Technology to help extend the life of the emission system
  • Superior dispersancy that fights sludge build up
  • Exceptional oil burn-off protection exceeding industry standards (1)
  • Seal conditioners to help reduce leaks
  • Advanced additives that minimize engine wear
  • Improved fuel economy (2)
  • (1) Based on API and ACEA volatility specifications
  • Meets or exceeds the following specifications:
  • (2) In 5W-20, 5W-30 and 10W-30 grades versus industry specifications
  • Meets or exceeds the following specifications:
  • API SP/SN PLUS/SM
  • ILSAC GF-6
See More

FRAM – Conventional 10W30 Engine Oil with Low-Speed Pre-Ignition Control – 5 Qt (Part No.F630-5QT)

Conventional 10W30 Engine Oil with Low-Speed Pre-Ignition Control - 5 Qt

from

$25.99
FRAM Engine Oil SAE 10W-30 utilizes a blend of high-quality conventional base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 10W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:
  • Low-speed pre-ignition control
  • Chain wear protection
  • Piston cleanliness
  • Turbo-compatibility
  • Always refer to your vehicles operating manual to select the correct grade oil for your engine.
  • Suitable for modern engines: Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs.
See More

Valvoline – High Mileage with MaxLife Technology Synthetic Blend 10W-30 Engine Oil: Maximize Engine Life, 5 Quart (Part No.881161)

High Mileage with MaxLife Technology Synthetic Blend 10W-30 Engine Oil: Maximize Engine Life, 5 Quart

from

$29.99
75,000 miles is more than a mile marker. It’s a signal that your engine is ready for greater protection. That’s when you need Valvoline High Mileage with MaxLife Technology Motor Oil. Its exclusive formula is proven to maximize engine life in cars, trucks, and SUVs with over 75,000 miles. Our mixture is specially developed with a unique combination of synthetic and premium conventional oils to protect your high-mileage motor against wear, friction, heat, and deposits – the four major causes of engine breakdown and expensive repairs. Anti-wear additives defend critical engine components, advanced friction-fighting agents reduce heat and abrasion, added detergents clean the inside of your engine, and premium seal conditioners handle aging seals to prevent leaks. It fights sludge, corrosion and rust that can rob your engine of horsepower, fuel efficiency and longevity. From extreme temperatures and cold starts to stop-and-go traffic and frequent short trips, viscosity modifiers make sure the oil flows more easily, coats more completely, and resists thermal breakdown under even the most intense driving conditions. Its unique mixture curbs contaminants to keep high-mileage engines from burning and consuming oil that can foul spark plugs, creating higher emissions and causing your motor to run roughly.

Product Features:
  • Maxlife technology prevents engine breakdown with 40% better wear protection than the industry standard
  • Refresh aging seals and prevent leaks with seal conditioners
  • Reduce sludge, deposits, corrosion, and rust with added detergents – keep motors clean inside
  • Enhanced friction performance helps maximize power with advanced friction-fighting agents
  • Meets or exceeds all requirements of ilsac gf-6a, api sp, api sn with sn plus, api sn
  • MaxLife Technology: The exclusive formula of Valvoline High Mileage with MaxLife Technology Engine Oil is proven to maximize engine life in cars, trucks, and SUVs with over 75,000 miles.
See More

Castrol – EDGE High Mileage 5W-30 Advanced Full Synthetic Engine Oil, 5 Qt (Part No.15906E)

EDGE High Mileage 5W-30 Advanced Full Synthetic Engine Oil, 5 Qt

from

$38.99
Castrol EDGE High Mileage 5W-30 is an advanced full synthetic motor oil that is specifically designed for vehicles with over 75,000 miles. It’s been engineered to reduce leaks, burnoff and power robbing deposits, but also contains a proprietary additive to protect the emission system. Our Phosphorus Replacement Technology reduces harmful phosphorus to protect the catalytic converter and extend maximum performance. It is the natural choice for drivers who demand maximum performance from their high mileage car.

Product Features:
  • Phosphorus Replacement Technology to help extend the life of the emission system
  • Reduces leaks, oil burnoff and power robbing deposits
  • 15,000 miles between oil changes (1)
  • (1) Or one year, whichever comes first
  • Meets or exceeds the following specifications:
  • API SP/SN PLUS/SN/SM
  • ILSAC GF-6
  • Porsche A40
  • Meets engine test requirements of Chrysler MS 6395
  • Meets Ford WSS-M2C961-A1
See More

FRAM – 5 Qt Conventional 5W30 Engine Oil with Low-Speed Pre-Ignition Control (Part No.F620-5QT)

5 Qt Conventional 5W30 Engine Oil with Low-Speed Pre-Ignition Control

from

$25.99
FRAM Engine Oil SAE 5W-30 utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 5W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:
  • Low-speed pre-ignition control
  • Chain wear protection
  • Piston cleanliness
  • Turbo-compatibility
  • Always refer to your vehicles operating manual to select the correct grade oil for your engine.
  • Reliable engine protection: FRAM Conventional Oil 5W30 5 QT utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions.
See More

FRAM – 20W-50 Conventional Motor Oil, Reliable Motor Protection, 1 Quart (Part No.F650)

20W-50 Conventional Motor Oil, Reliable Motor Protection, 1 Quart

from

$6.49
FRAM Engine Oil SAE 20W-50 utilizes a blend of high-quality conventional base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 20W-50 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 20W-50 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:
  • Low-Speed Pre-Ignition Control
  • Chain Wear Protection
  • Piston Cleanliness
  • Turbo-Compatibility
  • ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
  • High-Quality Conventional Base Stocks: FRAM Engine Oil SAE 20W-50 utilizes a blend of high-quality conventional base stocks for reliable engine protection.
  • Versatile Compatibility: Suitable for modern gas-direct engines (GDI), turbo gas-direct engines (TGDI), and older carbureted or normally fuel-injected gasoline engine designs.
  • Meets Industry Standards: Complies with API SP, SN Plus, SN, SM, and ILSAC GF-6A, GF-5, and earlier API and ILSAC Service Categories.
  • Broad Operating Range: Designed to provide reliable engine protection across a broad range of operating conditions.
See More

FRAM – 10W-30 Small Engine 10W-30 Conventional Oil: 1 Quart (Part No.464-32)

10W-30 Small Engine 10W-30 Conventional Oil: 1 Quart

from

$7.29
10W-30 Small Engine 10W-30 Conventional Oil: 1 Quart

Royal Purple – HMX SAE 5W-30 High-Mileage Synthetic Motor Oil (5 Quart) (Part No.11748)

HMX SAE 5W-30 High-Mileage Synthetic Motor Oil (5 Quart)

from

$66.99
Royal Purple HMX SAE 5W-30 High-Mileage Synthetic Motor Oil, 5 quart is specifically designed to minimize wear and restore lost performance in engines with more than 75,000 miles. Formulated with robust zinc/phosphorus anti-wear compounds combined with Royal Purple’s proprietary additive technology Synerlec, HMX is chemically enhanced to revitalize hardened seals, reducing oil consumption common in high-mileage engines. In addition, HMX is fortified with stout detergents to remove engine build-up and deposits, maintain cleanliness and promote engine longevity. 

Product Features:
  • Specifically designed to minimize wear and restore lost performance in engines with more than 75,000 miles
  • Formulated with robust zinc/phosphorus anti-wear compounds combined with Royal Purple’s proprietary additive technology
  • HMX is chemically enhanced to revitalize hardened seals, reducing oil consumption common in high-mileage engines
  • Reduces friction and metal-to-metal contact for peak engine performance
  • Also provides outstanding oxidation resistance to safely extend oil drain intervals, and an ionic attraction to metal surfaces, providing protection and minimizing wear at start-up
See More

Castrol – GTX High Mileage 5W-30 Synthetic Blend Motor Oil, 1 Quart (Part No.149D6A)

GTX High Mileage 5W-30 Synthetic Blend Motor Oil, 1 Quart

from

$10.49
Castrol GTX High Mileage 5W-30 is the #1 consumer high-mileage brand of motor oil. It’s a synthetic blend engine oil that helps extend the life of engines by protecting against sludge, wear and burn-off. Engineered with Phosphorous Replacement Technology, it also protects emission systems by replacing some of the phosphorous that can damage catalytic converters.

Product Features:
  • Phosphorus Replacement Technology helps extend emission system life
  • Superior dispersancy that fights sludge build up
  • Exceptional oil burn-off protection exceeding industry standards (1)
  • Seal conditioners to help reduce leaks
  • Advanced additives that minimize engine wear
  • Improved fuel economy (2)
  • (1)Based on API and ACEA volatility specifications
  • Approved for BMW M-Models
  • (2) In 5W-20, 5W-30 and 10W-30 grades versus industry specifications
  • Meets or exceeds the following specifications:
  • API SP/SN PLUS/SN/SM
  • ILSAC GF-6
  • Meets Ford WSS-M2C946-B1
  • Meets Ford WSS-M2C961-A1
See More

LIQUI MOLY – HighTech Full Synthetic 5W-40 Engine Oil: Gas & Diesel, Reduces Oil And Fuel Consumption, 5 Liter (Part No.2332)

HighTech Full Synthetic 5W-40 Engine Oil: Gas & Diesel, Reduces Oil And Fuel Consumption, 5 Liter

from

$49.99
Liqui Moly’s Leichtlauf High Tech 5W-40 is a fully synthetic, premium low-friction engine oil for all-season use in gasoline and diesel engines without diesel particulate filters (DPF). The combination of innovative base oils – based on synthesis technology and the latest additive technology – guarantees an engine oil that reduces oil and fuel consumption and that ensures fast lubrication of the engine. Depending on the manufacturer instructions, oil change intervals of up to 40,000 km are possible. Ideally suited for modern gasoline and diesel engines with multi-valve technology, turbocharger and with or without charge air cooling. Especially suitable where there are long intervals between changes and heavy duty engine requirements.

Product Features:
  • All season use reliable at high and low temperatures
  • Suited for modern gasoline and diesel engines with multivalve technology, turbocharger and with or without charge air cooling
  • An engine oil that reduces oil and fuel consumption
  • Ensures fast lubrication of the engine
  • Made in germany
  • Low-friction formula: Leichtlauf LIQUI-MOLY Synthetic Engine Oil 5W-40 is a premium, fully synthetic engine oil that reduces oil and fuel consumption, thanks to its low-friction formula.
See More

Valvoline – Full Synthetic High Mileage with MaxLife Technology 5W-20 Engine Oil: Maximizes Engine Life, 1 Quart (Part No.849644)

Full Synthetic High Mileage with MaxLife Technology 5W-20 Engine Oil: Maximizes Engine Life, 1 Quart

from

$11.99
Upgrading your motor oil to Valvoline Full Synthetic High Mileage with MaxLife Technology can help you increase the longevity of your car, truck or SUV with over 75,000 miles. It’s proven to protect your high-mileage motor against wear, friction, heat, and deposits – the leading causes of engine breakdown and expensive repairs. Our exclusive formulation goes beyond industry standards to protect your engine. It’s fortified with enhanced wear additives and friction-fighting agents to safeguard critical engine components, extra detergents to clean inside your engine, and premium seal conditioners to restore aging seals and prevent leaks. Superior viscosity modifiers and high-quality base oils help it perform exceptionally in both high and low temperatures. Engineered with ingenuity, tested with tenacity, and proven with purpose, our formula was innovated in America with a century and a half of hands-on experience from the original motor oil brand.

Product Features:
  • Enhanced maxlife technology prevents engine breakdown in extreme conditions with 50% better wear protection than the industry standard
  • Treat and prevent leaks with premium seal conditioners to keep oil out of places it shouldn’t be
  • 25% extra defense against deposits, sludge, corrosion and rust via interior-cleansing detergents
  • Extreme temperature protection through our high-quality base oils and superior viscosity modifiers
  • Meets or exceeds all requirements of ilsac gf-6a, api sp, api sn with sn plus, api sn
  • High Mileage Oil Class: Valvoline MaxLife Synthetic Engine Oil is specially designed for engines with over 75,000 miles, making it the perfect choice for high mileage vehicles.
See More

FRAM – Full Synthetic High Mileage 10W-30 Motor Oil: 5 Quart (Part No.F943-5QT)

Full Synthetic High Mileage 10W-30 Motor Oil: 5 Quart

from

$28.99
FRAM Full Synthetic High Mileage SAE 10W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and and enhanced additives that meet the stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications while reducing leaks and oil consumption in worn or higher mileage engines. Formulated with synthetic base stocks, this oil offers increased oxidation inhibition performance as well as increased high and low temperature performance when compared against conventional oils. The FRAM Full Synthetic High Mileage SAE 10W-30 is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. Specially designed for engines with over 75,000 miles, the FRAM Full Synthetic High Mileage SAE 10W-30 provides the ultimate protection for your higher mileage engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Full Synthetic High Mileage SAE 10W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability for higher mileage vehicles over previous oil categories.

Product Features:
  • Faster oil flow at start-up
  • Fuel efficiency gains over heavier grade oils
  • Reduces oil cumsumption
  • Excellent sludge and varnish protection
  • Slows engine leaks
  • Outstanding thermal and oxidation stability
  • Lowers oil vaporization and consumption at extreme conditions
  • ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
  • Engine Cleaning and Efficiency: Helps clean out sludge buildup, keeping engines running clean with increased efficiency and power, ideal for engines with over 75,000 miles.
  • Advanced LSPI Prevention: Contains additive technology designed to prevent low-speed pre-ignition (LSPI), a major concern for vehicles with gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs.
  • Comprehensive Engine Protection: Provides increased wear protection, oxidation, and shear stability for higher mileage vehicles, meeting stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications.
See More

Helping You Find the Right Oil and Lubricants for Your Suzuki Samurai

You love your Samurai. So we’ve made it easier than ever to help you find Suzuki Samurai Oil and Lubricants in our online catalog. Our inventory holds 57 aftermarket and OEM Oil and Lubricants for your Suzuki Samurai, ranging from $6.29 to $154.99.

We offer parts from 9 brands trusted to make quality Oil and Lubricants for your Suzuki Samurai. Before you buy, take some time to read through customer reviews. We currently have 88,481 reviews of Suzuki Samurai Oil and Lubricants from previous customers. Some of the top rated parts include EDGE 5W-30 Advanced Full Synthetic Motor Oil, 1 Quart with 4.9 stars and 5W-20 High Mileage Synthetic Blend Motor Oil, 5 Quart with 4.8 stars.

Find your Samurai Oil and Lubricants here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Suzuki Samurai part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Oil and Lubricants Brands for Your Suzuki Samurai

Our inventory holds Oil and Lubricants for your Suzuki Samurai from 9 trusted brands. You’ll find OEM and aftermarket parts from brands like Castrol, Fram, and Valvoline, all of which can keep that Suzuki happy.

Top-Rated Castrol Oil and Lubricants

Leading Castrol Oil and Lubricants

We carry Castrol brand parts for your Suzuki Samurai across several catalog categories, including Motor Oil. Some of our most reviewed Castrol parts include:

FAQs for Suzuki Samurai Oil and Lubricants

What are the most purchased Oil and Lubricants for the Suzuki Samurai?

Out of 57 Oil and Lubricants for the Suzuki Samurai, the most popular in our inventory are:
5W-30 Full Synthetic Motor Oil: 5 Quart
from $27.99
This product is not rated
5W-30 Full Synthetic Motor Oil: 5 Quart
Engine Oil

What are the top-rated Suzuki Samurai Oil and Lubricants?

Top-rated Oil and Lubricants for your Suzuki Samurai based on customer reviews/ratings are:
EDGE 5W-30 Advanced Full Synthetic Motor Oil, 1 Quart
from $11.99
(442)
EDGE 5W-30 Advanced Full Synthetic Motor Oil, 1 Quart
“The best oil for my car.”
5W-20 High Mileage Synthetic Blend Motor Oil, 5 Quart
from $29.99
(371)
5W-20 High Mileage Synthetic Blend Motor Oil, 5 Quart
“great oil great price”