Sunbeam Tiger Performance and Racing Products
Top Sunbeam Tiger Performance and Racing Products Categories
We carry over 14 Performance and Racing Products in inventory for the Sunbeam Tiger. If you’re looking for aftermarket Performance and Racing Products for your Sunbeam Tiger, check out all these categories:
Essential Sunbeam Tiger Performance and Racing Products
Holley – Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny (Part No.0-80670)
from
$699.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
- Optimized Street Calibration That Works Out Of The Box
- Factory Preset Electric Choke For Easy Startups
- Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
- No Unnecessary Trips Back To The Parts Store
- Limited Lifetime Warranty
- 100% Wet Flow Tested By Holley Technicians
- Arrives Ready To Run
Holley – Off Road Carbs (Part No.0-90670)
from
$819.99
The off-road truck avenger is designed specifically for off-road applications. The unique fuel metering block eliminates fuel spillover through the boosters at extreme angles allowing for 40 degree climbing, 30 degree side hill maneuvers and nose-down descents to avoid hesitations, stalling and flooding typically associated with carbs in an off road environment. The 470 CFM off-road truck avenger is the perfect carburetor for 4 cylinder, V-6, and inline 6 cylinder engines. Viton(R) is a registered trademark of DuPont Performance Elastomers.
Product Features:
See More
Product Features:
- Gold Dichromate Finish For Extreme Off Road Environments
- Single Feed Fuel Inlet For Ease Of Installation
- Optimized Off-Road Calibration That Works Out-Of-The-Box
- Factory Preset Electric Choke For Easy Startups
- Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
- One Piece Off-Road Vent Tube Eliminates Fuel Spillover
- Metering Block For Flood Free Op. 40 deg. Climb/30 deg. Side Hill
- Limited Lifetime Warranty Defects In Material/Workmanship
Holley – Prem Street Carbs (Avengers) (Part No.0-80770)
from
$716.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
- Optimized Street Calibration That Works Out Of The Box
- Factory Preset Electric Choke For Easy Startups
- Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
- No Unnecessary Trips Back To The Parts Store
- Limited Lifetime Warranty
- 100% Wet Flow Tested By Holley Technicians
- Arrives Ready To Run
Holley – Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny (Part No.0-80457S)
from
$509.99
Holley’s new 0-80457SA is constructed from aluminum which compared to its zinc counterpart equates to a weight savings of 40%! Holley’s aluminum 0-80457SA will hold its shine longer and also can be hand polished for a custom look! Its 600 CFM of airflow,
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
Edelbrock – Performer-Plus Camshaft Kit for Small-Block Ford 289-302 V8 (Part No.2122)
from
$338.99Product Features:
- Designed for Optimum Torque and Acceleration
- Maximum Performance From Idle through Mid-Range
- Matched to Edelbrock Performer Intakes
- Includes Hydraulic Lifters and Assembly Lube
- Major Improvement in Throttle Response and Torque
- Use For Daily Drivers/Trucks/Vans/RVs/4x4s
- Take The Guesswork Out Of Camshaft Selection
Edelbrock – Torker-Plus Camshaft Kit for 1957-95 Small-Block Ford 289-302 V8 (Part No.5022)
from
$440.99
Edelbrock camshafts are matched to Edelbrock Total Power Package components for proven performance, taking the guesswork out of camshaft selection. They are compatible with OEM or Edelbrock hydraulic roller tappets which reduce friction, virtually eliminate break-in problems, and permit higher valve velocities for increased performance. Designed to work with Torker II manifolds for performance from 2500 to 6500 RPM, these camshafts are ideal for high-performance street, drag or marine applications. Torker-Plus cams have a slightly rough idle and are not suitable for trucks or towing applications. Hydraulic flat tappet lifters are included with each camshaft.
Product Features:
See More
Product Features:
- Designed for 2500 to 6500 Performance
- Designed for Hi-Perf Street; Drag or Marine Use
- Matched to Edelbrock Torker II Intakes
- Includes Hydraulic Lifters and Assembly Lube
- Dyno Matched/Street Proven Performance
- Take The Guesswork Out Of Camshaft Selection
Edelbrock – Performer RPM Ford Small Block 302 Intake Manifold (Part No.7121)
from
$359.99Product Features:
- Best for the Ultimate in Street High-Performance
- Designed for 1500 to 6500 RPM Street-Driven Power
- Dual-Plane High-Rise Intake w/180 deg Firing Order
- Produces Incredible Top-End Horsepower
- Retains Good Throttle Response and Acceleration
- Larger Plenum and Runners Maximizes Other Upgrades
Edelbrock – Performer 289 Intake Manifold for Small-Block Ford, Black Finish (Part No.21213)
from
$465.99
Edelbrock part #21213 Performer 289 intake manifold is designed for street 260-289-302 c.i.d. Ford V8’s without EGR. Will not fit Boss 302 or 255 c.i.d. V8’s. Edelbrock carbs will work with Ford automatic overdrive trans (AOD) when used with Lokar bracket
Product Features:
See More
Product Features:
- Idle-5500 RPM Range
- Dual Plane Type-4150 Style Flange
- 3.5 in. Front Height, 4.12 in. Center Height, 4.75 in. Rear Height
- Black Powder Coated Finish
- Made In The USA
Hays – Flywheels (Part No.12-535)
from
$511.99
Hays aluminum flywheels are manufactured from certified billet material that will not break up under the stress of high RPM and severe punishment of racing. Features replaceable steel surface insert. Precision balanced to either neutral (internal) or Detroit (external) specifications. Meets SFI specification 1.1 for racing.
Product Features:
See More
Product Features:
- Certified Billet Material
- Borg and Beck Clutch Pattern
- Long-Style Clutch Pattern
- Ring Gear Securely Mounted To Prevent Spinning
Sunbeam Tiger Performance and Racing Products Categories
Helping You Find the Right Performance and Racing Products for Your Sunbeam Tiger
You love your Tiger. So we’ve made it easier than ever to help you find Sunbeam Tiger Performance and Racing Products in our online catalog. Our inventory holds 14 aftermarket and OEM Performance and Racing Products for your Sunbeam Tiger, ranging from $16.99 to $819.99.
We offer parts from 4 brands trusted to make quality Performance and Racing Products for your Sunbeam Tiger. Before you buy, take some time to read through customer reviews. We currently have 53 reviews of Sunbeam Tiger Performance and Racing Products from previous customers.
Find your Tiger Performance and Racing Products here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Sunbeam Tiger part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Performance and Racing Products Brands for Your Sunbeam Tiger
Our inventory holds Performance and Racing Products for your Sunbeam Tiger from 4 trusted brands. You’ll find OEM and aftermarket parts from brands like Holley, Edelbrock, and Hays, all of which can keep that Sunbeam happy.
We have Holley parts available for your Sunbeam Tiger in categories like Performance Fuel Systems. Some of the top-rated Holley parts in these categories are:
from
$509.99
(45)
Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny
Performance Carburetors
from
$699.99
(6)
Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny
Performance Carburetors
FAQs for Sunbeam Tiger Performance and Racing Products
What are the most purchased Performance and Racing Products for the Sunbeam Tiger?
Out of 14 Performance and Racing Products for the Sunbeam Tiger, the most popular in our inventory are:
from
$359.99
This product is not rated
Performer RPM Ford Small Block 302 Intake Manifold
Performance Intake Manifolds
from
$338.99
This product is not rated
Performer-Plus Camshaft Kit for Small-Block Ford 289-302 V8
Performance Engine Camshaft and Lifter Kits
