Subaru XV Crosstrek Steering and Chassis Parts
Top Subaru XV Crosstrek Steering and Chassis Parts Categories
We carry over 45 Steering and Chassis Parts in inventory for the Subaru XV Crosstrek. If you’re looking for aftermarket Steering and Chassis Parts for your Subaru XV Crosstrek, check out all these categories:
Essential Subaru XV Crosstrek Steering and Chassis Parts
Whiteline – Strut Mount (Part No.KCA409)
from
$173.99
Whiteline offset strut mounts allow for adjustments of either caster or camber depending on driver requirements. Manufactured from low compliance rubber and twin shielded bearing design, this strut top allows for gains in caster or camber depending on vehicle.
Product Features:
See More
Product Features:
- Engineered to alter/ optimise camber alignment to compensate for body roll, body distortion and tyre roll when cornering.
- Protective E-Coat coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Install guide included providing detailed instructions on how to install your new Whiteline purchase.
Driveworks – TIE ROD END 1 EA DRIVE (Part No.DW-ES3712)
from
$25.99
Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.
Product Features:
See More
Product Features:
- Forged housing from specific materials provides strength and durability to prevent breakage
- Coated technology provides a smooth and durable surface to prevent corrosion and rust
- Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination
- A slotted nut and cotter pin for a more secure installation
MOOG – Suspension Stabilizer Bar Bushing Kit (Part No.K201913)
from
$23.99
Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
- EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
- HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Carquest Premium – Tie Rod End (Part No.700-536014)
from
$46.99
Carquest Premium tie rods are engineered and benchmarked to original equipment (O.E.) performance standards. Consistent manufacturing and rigorous quality testing ensure a trouble-free installation and long service life. Carquest Premium tie rods utilize the same joint technology as the OE part, with either a sealed (maintenance-free) design or a metal-on-metal (greaseable) design. We feature a corrosion-resistant coating on all tie rods to reduce rust. Each part number in the Carquest Premium tie rod line is designed and built to deliver the quality that you demand.
Product Features:
See More
Product Features:
- Engineered for OE fit, form and function
- Corrosion-resistant coating to reduce rust and extend service life
- Hex formed studs and/or wrench flats for easier installation (where applicable)
- Joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
- Sealed designs feature a fully polished ball stud combined with synthetic bearing technology for smooth operation, improved reliability and no maintenance
- Inner tie rod ends are supplied with thread locking compound
- Hardware included for easier installation (where applicable)
Cardone – Remanufactured Rack and Pinion Assembly (Part No.1A-7006)
from
$783.99
Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.
Product Features:
See More
Product Features:
- 100 percent replacement of rubber sealing components.
- Application of specialized lubricant(s) for extended life.
- Finished in protective coating to prevent corrosion and rust.
- Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
MOOG – Alignment Camber Bolt Assortment (Part No.CAM1A)
from
$438.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can solve excessive tire wear and steering issues
- Provides like-new steering, ease of installation and longer life
- Can bring vehicles back to factory specification
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
Whiteline – Subframe Mount Bushing (Part No.KDT907)
from
$238.99
The Whiteline kit replaces the bushings in the rear subframe to dramatically reduce rear cross member misalignment and movement which allows a more positive feel from the rear end during cornering. Recommended for motorsport applications.
Product Features:
See More
Product Features:
- Install guide included providing detailed instructions on how to install your new Whiteline purchase.
- Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
- Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
Dorman – Suspension Control Arm and Ball Joint Assembly (Part No.528-254)
from
$220.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
Product Features:
See More
Product Features:
- Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
- Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
- Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed – additional coatings offer long-lasting rust and corrosion resistance
Dorman – Control Arm and Ball Joint Assembly – Suspension (Part No.537-163)
from
$124.99
This alignment toe arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
Dorman – Front Left Steering Knuckle (Part No.698-221)
from
$201.99
This steering knuckle is precision-engineered and rigorously tested to provide reliable replacement for the original knuckle on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – this steering knuckle is designed to replace the original knuckle on specific vehicles
- Reliable fit – precision-engineered to match the dimensions of original components
- Trustworthy construction – manufactured to strict standards using durable materials
- Rigorously tested – thorough quality control measures ensure longevity
MOOG – Strut Alignment Camber Kit (Part No.K90474)
from
$35.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
Rare Parts – CAM BOLT KIT (Part No.RP16746)
from
$49.99
CAM BOLT KIT
Whiteline – Brace Sway Bar Mount Support (Part No.KBR15)
from
$72.99
Whiteline’s rear sway bar mount support brace increases the stiffness of the rear sway bar mount and reduce the likelihood of bending or cracking of the OEM mount due to the increased loads placed upon it. Recommended use with aftermarket sway bars for optimum sway bar performance.
Product Features:
See More
Product Features:
- Bracing maintains alignment angles and spring rates by greatly reducing body or chassis flex.
- Install guide included providing detailed instructions on how to install your new Whiteline purchase.
Whiteline – Sway Bar 20Mm Heavy Duty (Part No.BSR49)
from
$202.99
Engineered to ‘Activate More Grip’, sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tyres thereby increasing cornering grip and improving outright performance. This Whiteline 20mm fixed position sway bar = more grip = better handling = outright performance – it’s the best dollar for dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety and tyre wear without affecting ride quality or comfort.
Product Features:
See More
Product Features:
- DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.
- DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.
- Forged ends ensure maximum strength and performance of the sway bar at the sway bar link mounting point.
Dorman – Sway Bar Kit (Part No.927-700)
from
$197.99
Product Features:
See More
- Ideal replacement – this sway bar matches the fit and function of the original part on specified vehicle years, makes and models
- Durable construction – this sway bar is made of quality materials with a corrosion-resistant finish
- Cost-effective solution – offers original equipment quality at competitive price
- Quality tested – this part has undergone testing to ensure a quality fit and long service life
MOOG – Suspension Stabilizer Bar Bushing Kit (Part No.K201949)
from
$27.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- ENGINEERING EXCELLENCE — With 50+ dedicated engineers and 50+ patents, MOOG engineers every part with purpose
- STRONG AND DURABLE — Engineered to match or exceed OE requirements
- RESTORES RIDE — Provides revamped steering and handling feel
- QUIET DRIVE — Replacement can reduce rear end noise
Carquest Premium – Stabilizer Bar Link Kit (Part No.510-234207)
from
$48.99
Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability. Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications. Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.
Product Features:
See More
Product Features:
- Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
- Hex formed studs &/or wrench flats for ease of installation
- Hardware included for easier installation (where applicable)
Driveworks – Ball Joint (Part No.DW-K9513)
from
$29.99
Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.
Product Features:
See More
Product Features:
- Forged housing provides exceptional strength and durability
- Oxidation film on the surface of the metal protects against corrosion
- Phosphated ball stud provides a smooth, durable and wear-resistant surface to extend service life
- Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination
MOOG – Suspension Ball Joint (Part No.K9513)
from
$57.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
- RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- Designed to meet or exceed original equipment performance
Carquest Premium – Ball Joint (Part No.410-69062)
from
$46.99
Product Features:
See More
- OE matched design for Form, Fit, and Function
- Advanced corrosion-resistant electro-coating to reduce rust
- Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
- Hex formed studs &/or wrench flats for ease of installation
- Hardware included for easier installation (where applicable)
- Pre-applied threadlocker keeps fasteners from loosening due to vibration
Whiteline – Roll Centre/Bump Steer Correction Kit (Part No.KCA313)
from
$209.99
A must for lowered vehicles, Whiteline roll centre and bump steer correction kits are designed to correct roll-centre geometry using specially engineered ball-joints and tie rod ends. Raising the front roll-centre results in a substantial increase to front roll resistance and a significant reduction in suspension compression of the outside front wheel during cornering. The result is more even weight distribution and improved tyre contact ultimately improving front end grip and cornering speeds.
Product Features:
See More
Product Features:
- Articulation voids deliver necessary suspension articulation and/or compression under loads.
- Protective E-Coat coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Articulation voids deliver necessary suspension articulation and/or compression under loads.
Dorman – Alignment Camber / Toe Arm (Part No.545-247)
from
$103.99
This alignment camber and toe arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
Subaru XV Crosstrek Steering and Chassis Parts Categories
Helping You Find the Right Steering and Chassis Parts for Your Subaru XV Crosstrek
You love your XV Crosstrek. So we’ve made it easier than ever to help you find Subaru XV Crosstrek Steering and Chassis Parts in our online catalog. Our inventory holds 45 aftermarket and OEM Steering and Chassis Parts for your Subaru XV Crosstrek, ranging from $20.49 to $783.99.
We offer parts from 7 brands trusted to make quality Steering and Chassis Parts for your Subaru XV Crosstrek. Before you buy, take some time to read through customer reviews. We currently have 1,570 reviews of Subaru XV Crosstrek Steering and Chassis Parts from previous customers. Some of the top rated parts include Camber Bolt Kit with 3.0 stars.
Find your XV Crosstrek Steering and Chassis Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Subaru XV Crosstrek part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Steering and Chassis Parts Brands for Your Subaru XV Crosstrek
Our inventory holds Steering and Chassis Parts for your Subaru XV Crosstrek from 7 trusted brands. You’ll find OEM and aftermarket parts from brands like Moog, DriveWorks, and Carquest Premium, all of which can keep that Subaru happy.
We have MOOG parts available for your Subaru XV Crosstrek in categories like Ball Joints and Sway Bars. Some of the top-rated MOOG parts in these categories are:
Top-Rated MOOG Steering and Chassis Parts
Leading MOOG Steering and Chassis Parts
We carry MOOG brand parts for your Subaru XV Crosstrek across several catalog categories, including Tie Rods and Camber Kits. Some of our most reviewed MOOG parts include:
FAQs for Subaru XV Crosstrek Steering and Chassis Parts
What are the most purchased Steering and Chassis Parts for the Subaru XV Crosstrek?
Out of 45 Steering and Chassis Parts for the Subaru XV Crosstrek, the most popular in our inventory are:
What are the top-rated Subaru XV Crosstrek Steering and Chassis Parts?
Top-rated Steering and Chassis Parts for your Subaru XV Crosstrek based on customer reviews/ratings are:
from
$24.99
(1)
Camber Bolt Kit
“If you have a lifted Pathfinder you replace one of the bolts from the knuckle to the strut with this and allows you to adjust the camber to get the ve”
