Subaru Outback Engine Cold Air Intakes

K&N’s Universal Air Filters are designed and manufactured for a wide variety of applications including racing vehicles, radio-controlled cars, generators, snowmobiles, tractors, and other applications. Regardless of the angle or offset diameter of the air intake, there is probably a K&N Universal air filter for your equipment. All filters are constructed with ultra-strong molded pliable rubber flanges which absorb vibration and allow for secure attachment and can also be stretched for up to 1/16 of an inch (1.5mm) to fit in-between sizes. K&N universal air filters are washable and reusable.

Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media.

The AEM 21-478WR Performance Cold Air Intake System produces horsepower And torque gains by replacing your vehicle’s restrictive factory air filter And air intake housing. This air intake system was designed, tuned And dyno-tested to fit specific Subaru WRX, WRX STI, Impreza WRX And Impreza WRX STI models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration And performance. The air filter is located in the original air box space And is protected by a heat shield which is designed to reduce intake air temperature And increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable textured red powder coated finish. This air intake system was developed to accommodate the engine’s factory emissions control devices including the mass air flow sensor. The cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools And it is backed by AEM’s Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California And other states adopting California emission standards while others are 50 state legal. View the 21-478WR vehicle applications to determine the legal status for each vehicle.

Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media.

The AEM 21-772C Performance Cold Air Intake System produces horsepower And torque gains by replacing your vehicle’s restrictive factory air filter And air intake housing. This air intake system was designed, tuned And dyno-tested to fit specific Subaru Impreza models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration And performance. The air filter is located in the original air box space And is protected by a heat shield which is designed to reduce intake air temperature And increase horsepower. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine’s factory emissions control devices including the mass airflow sensor. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools And it is backed by AEM’s Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California And other states adopting California emission standards, while others are 50 state legal. View the 21-772C vehicle applications to determine the legal status for each vehicle.

Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media.

Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media.

The AEM 21-732C Performance Cold Air Intake System produces horsepower And torque gains by replacing your vehicle’s restrictive factory air filter And air intake housing. This air intake system was designed, tuned And dyno-tested to fit specific Subaru WRX models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration And performance. The air filter is located in the original air box space And is protected by a heat shield which is designed to reduce intake air temperature And increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine’s factory emissions control devices including the mass air flow sensor. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools And it is backed by AEM’s Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California And other states adopting California emission standards, while others are 50 state legal. View the 21-732C vehicle applications to determine the legal status for each vehicle.

Takeda intakes are constructed out of lightweight black wrinkle finish aluminum tubing or clear-coat anodized polished tubing for maximum air flow and a great style. This intake uses a large 360 degree high flow Pro DRY S air filter for maximum flow, filtration and convenience. The Pro DRY S air filter requires no oils and cleans with simple soap and water. Takeda intakes come complete with all tubing, filters, couplers and hardware for an easy installation.

Takeda intakes are constructed out of lightweight black wrinkle finish aluminum tubing or clear-coat anodized polished tubing for maximum air flow and a great style. This intake uses a large 360 degree high flow Pro DRY S air filter for maximum flow, filtration and convenience. The Pro DRY S air filter requires no oils and cleans with simple soap and water. Takeda intakes come complete with all tubing, filters, couplers and hardware for an easy installation.

“This 7-1/2″” tall 360-degree radial flow air filter features a 3-1/2″” round flange and our oiled Black Pro 5R media with five layers of progressively finer cotton gauze media for maximum airflow and performance. This media is best suited for street and track use. The smooth one-piece sealed housing, constructed of heat-resistant orange XLPE (cross-linked polyethylene) polymer, features our patent-pending filter-to-housing interface. A clear sight window allows for hassle-free filter inspection, without having to disassemble your system. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat-soak resistant and extremely durable. This intake is designed to use factory mounting locations, minimizing the use of unnecessary hardware, ensuring a perfect fit every time. Its revolutionary design, featuring our patent pending filter-to-housing interface uses half the number of parts of a traditional cold air intake system. Stainless-steel worm clamps are included for strength, and a premium bellows coupling allows for ample flexibility. Takeda Momentum intakes are designed with fewer parts for a fast and easy installation.”

“Large Three Layer Performance Air Filter:This aFe POWER Pro DRY S is a 7-1/2″” tall, oil-free, 360-degree radial flow performance air filter with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street and light off-road use. Its inverted top makes for more filter surface area, resulting in more flow and longer service intervals.Drone-Free, Dyno-Tuned Intake Tube:This system features a two-piece, computer-designed, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. Constructed from XLPE (cross-linked polyethylene) polymer, it is heat soak resistant and extremely durable. A factory-style Helmholtz Chamber is integrated into its design, toning down any drone.Unique One-Piece Housing:The sealed XLPE polymer housing features a rugged design, inspired by off-road tires, as well as a clear sight window, allowing for hassle-free filter inspection. aFe POWER’s patent pending filter-to-housing interface eliminates the use of an overabundance of parts, further simplifying the installation process. Additional cool air is brought into the housing via the factory air inlet scoop.Hassle-Free Installation:All stainless-steel clamps, hardware, and injection molded and silicone couplings are included for a hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on OEM parts.Fitment Note:This item does NOT fit Hybrid models.”

“5”” Tall Air Filter: This intake system utilizes a pre-oiled, large 5″” tall conical 360 degree radial flow performance air filter with 5-layers of progressive finer mesh cotton media providing maximum airflow and performance. High Quality ABS Plastic Heat Shield: aFe developed this high quality ABS plastic heat shield to block unwanted engine heat and eliminating heat soak. High Quality Plastic Red Intake Scoop: This System uses a high quality CAD designed, cross-linked polyethylene Red intake scoop to capture the coolest air while maintaining a perfect fit. Mandrel-Bent Tubing: A one-piece 3″” Mandrel-Bent, Wrinkle-Black Powder-Coated Intake Tube directs unrestricted airflow from the large filter to the turbo for more horsepower and torque. Hassle-Free Installation: All clamps, coupling, and hardware are included for hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on OEM parts.”

Introducing the all new Takeda Momentum Sealed Intake System for the 2013-2016 Scion FR-S H4-2.0L. In recent dyno testing this system produced 9 HP and 10 lbs. x ft. of torque and out flowed the factory intake by 54%. This system uses a large 360 degree high flow Pro DRY S air filter for maximum flow, filtration and convenience. The Pro DRY S air filter requires no oils and cleans with simple soap and water. Also included is a wrinkle black rotomolded intake tube designed to increase airflow for maximum torque. Takeda intakes come complete with all necessary hardware.

“This intake system features a 5″” tall conical air filter with three layers of oil-free synthetic media and requires no oil during maintenance to provide maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity. This media is best suited for street and light off-road use. Pro DRY S filters are easily recharged with aFe’s POWER CLEANER. One Piece 2-3/4″” Mandrel-Bent Wrinkle-Black Powder-Coated Aluminum Intake Tube directs unrestricted airflow from the massive filter to the throttle body for more horsepower and torque. aFe developed this sturdy 18 gauge steel wrinkle-black powder-coated heat shield to mount onto the factory airbox to provide a hassle-free installation utilizing factory mounting locations. Premium hardware and clamps are used to securely mount the high flow air filter and the intake tube.”

This product fits LEV1/LEV vehicles, with EFN: 1GMXA5.3184.

Takeda intakes are constructed out of lightweight black wrinkle finish aluminum tubing or clear-coat anodized polished tubing for maximum air flow and a great style. This intake uses a large 360 degree high flow Pro DRY S air filter for maximum flow, filtration and convenience. The Pro DRY S air filter requires no oils and cleans with simple soap and water. Takeda intakes come complete with all tubing, filters, couplers and hardware for an easy installation.