Subaru Outback Belts and Hoses

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

• Meets SAE J20R4, Class D-1 requirements
• Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
• Provides excellent protection against external elements

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

• Specifically-engineered materials resist collapse under vacuum
• Engineered to resist electrochemical degradation, the leading cause of hose failure
• Pre-shaped to fit and to ensure perfectly sealed conditions
• EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
• Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
• Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
• Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
• Caution: Do not use for fuel or oil transfer applications

Dayco ela (elastic) or stretch belts are specifically designed for two, three, and four point drives that are designed to use self-tensioning belts. Although these belts may look like standard poly rib belts, they are very different. These specially designed elastic belts have self-tensioning capabilities required by specific OE drives. Vehicles that are manufactured with stretch belts must replace them with stretch belts. These belts are not interchangeable with standard constructed belts of their same size. Dayco ela belts utilize a proprietary EPDM construction that is designed to elongate over the fixed pulley system, and then maintain the required belt tension over the life of the belt. The backbone behind the Dayco ela belt is its specially developed polyamide tensile member, which allows for high elongation required for installation, yet provides the proper tension maintenance properties to transmit the accessory loads demanded for the drive. This belt construction incorporates a wear resistant EPDM rib material, along with a highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord, thus providing the required adhesion and flexibility to maintain lasting performance. Stretch belts have unique installation instructions depending on the OE application. Installation may require a specialized tool for the application or a simple zip tie. Do not attempt to install by prying the belt on the pulleys. Dayco provides detailed instructions on the reverse side of the sleeve.

Product Features:

• Utilizes a proprietary EPDM construction that is designed to elongate over the fixed pulley system, and then maintain the required belt tension over the life of the belt
• Specially developed polyamide tensile member, which allows for high elongation required for installation, yet provides the proper tension maintenance properties to transmit the accessory loads demanded for the drive
• Incorporates a wear resistant EPDM rib material, along with a highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord, thus providing the required adhesion and flexibility to maintain lasting performance
• These specially designed elastic belts have self-tensioning capabilities required by specific OE drives designed for a stretch belt

Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:

• Meets the requirements of SAE J20R3, Class D-1
• Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
• Engineered as an OEM replacement
• The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.

Product Features:

• Has all the quality features of Gates molded coolant hose and similar to OEM specifications
• Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
• EPDM tube, synthetic fiber knit reinforcement, EPDM cover
• Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
• Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
• Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
• Caution: Do not use for fuel or oil transfer applications

Replacing a damaged cooler line with Dorman’s Auto Trans Oil Cooler Hose Assembly takes you a long way in protecting your transmission. Dorman’s line’s leak-resistant design prevents the common, high-stakes problem of transmission fluid loss. Plus, its robust construction readily defends against possible damage from road debris and corrosion.

Product Features:

• Includes all hardware needed for a complete repair (where applicable)
• Materials used in construction have been upgraded from steel and/or rubber to corrosion-resistant aluminum (where applicable)
• Direct replacement for ease of installation
• Rigorous quality control measures have been undertaken to ensure that this part conforms to product standards

The Dayco automatic belt tensioner features Dayco’s original, patented flat spring design to provide less operating range variation. It reduces the risk of premature accessory bearing failure due to high tension and lessens the risk of belt noise and slippage – or poor performance caused by low tension. A PTFE string wound within the spring resists abrasion and dampens noise. Dayco’s tensioner is also designed with a heavy-duty cast aluminum spring case and arm, which helps resist cracking and fatigue and offers additional strength, lessening the risk of distortion. Additional premium thermoplastic rubber spring slot plugs and rubber O-ring seals help keep contaminants out and zinc coated mounting bolts resist rust.

Product Features:

• Endures the toughest conditions while promoting quieter performance and longer life
• Features a steel pivot tube on specific designs for enhanced stability
• Built to outperform and outlast competitive OE parts
• Rust resistant construction

This accessory drive belt tensioner assembly is designed to match the fit of an original equipment assembly on specified vehicles. It is engineered to help ensure proper belt tension when an original belt is slipping, broken, or worn from fatigue.

Product Features:

• Direct replacement – this accessory drive belt tensioner assembly is designed to match the fit of an original equipment assembly on specified vehicles
• Ideal solution – engineered to help ensure proper belt tension when an original belt is slipping, broken, or worn from fatigue
• Durable construction – designed and manufactured to strict specifications for reliable performance
• Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

This idler pulley adjustment bolt kit is designed to match the original hardware required to repair the idler pulley on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

• Direct replacement – this accessory drive belt idler pulley adjustment bolt kit is designed to match the original hardware required to repair the idler pulley on specified vehicles
• Ideal solution – this kit is a reliable replacement for original components that are missing or have failed due to wear
• Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

This accessory drive belt tensioner pulley is designed to match the fit and function of the original pulley on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

• Direct replacement – this accessory drive belt tensioner pulley is designed to match the fit and function of the original pulley on specified applications
• Restores functionality – reliable replacement for an original pulley that has failed due to vibration or corrosion
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Product Features:

• Steel and thermoplastic construction designed to tight manufacturing tolerances for high durability and quality performance
• Built to last with a superior resistance to dirt, salt, chemicals and other under-hood contaminants
• OE-quality fit for virtually every domestic or import vehicle on the road today
• Bearings meet or exceed OE standards with application-specific speed and load requirements, to withstand high under hood temperatures
• Premium bearings eliminate bearing noise
• Mounting hardware included for some popular applications
• Reliable operation under severe conditions

Premium hose constructed for long service life.

Product Features:

• Good resistance to high temperatures for extended periods of time, which prolongs service life
• Meets SAE 20R3 Standard Wall Class D-2 requirements
• Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
• CAUTION: Do not use for fuel or oil transfer applications
• CAUTION: Do not use for fuel or oil transfer applications
• PLEASE NOTE: Item is priced and sold by the foot. See store for details.

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

• Specifically-engineered materials resist collapse under vacuum
• Engineered to resist electrochemical degradation, the leading cause of hose failure
• Pre-shaped to fit and to ensure perfectly sealed conditions
• EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
• Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
• Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
• Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
• Caution: Do not use for fuel or oil transfer applications

Bando has been manufacturing rubber products for over 100 years. Bando is the OEM supplier to over 80 percent of the top 10 cars sold in the U.S. (by volume). Bando belts are made with EPDM rubber which adheres to OEM specification that is more heat resistant and long lasting. With 19 plants worldwide, Bando are the 3rd largest manufacturer of automotive drive belts in the world. Bando’s automotive belts, serpentine, timing and V-belts are engineered to meet the unique requirements of today’s high performance engines for applications that run the gamut from international racing teams to light duty trucks. Bando manufactures belts for the world’s leading automakers, supplying both OEM and aftermarket applications, all to the same exacting standards of quality.

Product Features:

• Designed to provide the positive no-slip drive requirements needed on demanding overhead cam applications
• Precision molded teeth are protected by durable fabric facing for long life
• Tensile cord is engineered and tested for maximum load carrying capabilities
• Rubber backing resists abrasion, oil and heat

Bando has been manufacturing rubber products for over 100 years. Bando is the OEM supplier to over 80 percent of the top 10 cars sold in the U.S. (by volume). Bando belts are made with EPDM rubber which adheres to OEM specification that is more heat resistant and long lasting. With 19 plants worldwide, Bando are the 3rd largest manufacturer of automotive drive belts in the world. Bando’s automotive belts, serpentine, timing and V-belts are engineered to meet the unique requirements of today’s high performance engines for applications that run the gamut from international racing teams to light duty trucks. Bando manufactures belts for the world’s leading automakers, supplying both OEM and aftermarket applications, all to the same exacting standards of quality.

Product Features:

• Designed to provide the positive no-slip drive requirements needed on demanding overhead cam applications
• Precision molded teeth are protected by durable fabric facing for long life
• Tensile cord is engineered and tested for maximum load carrying capabilities
• Rubber backing resists abrasion, oil and heat

Drive Belt Idler Pul

Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:

• Designed for the majority of automotive vehicle applications on the road today
• High-quality materials help resist wear and improve belt life
• Features premium lubricated bearings to extend service life
• Meets or exceeds OE quality

Litens Automotive is the original equipment (O.E.) supplier for this application. This genuine Litens replacement pulley is also manufactured by Litens, the world’s largest supplier of original equipment power transmission products. Heavy duty thermoplastic pulley construction ensures long life and trouble-free performance. This pulley meets or exceeds all original equipment fit, form, and performance characteristics. For maximum performance and durability, always use genuine Litens components. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket._

Product Features:

• Heavy duty thermoplastic pulley construction.
• OE-spec sealed ball bearings with synthetic grease and double lip seals for long life
• Installation instructions included

This part is specifically designed for Pontiac, Scion, Subaru, and Toyota applications. Heavy duty steel pulley construction ensures long life and trouble-free performance. This pulley meets or exceeds all original equipment fit, form, and performance characteristics. For maximum performance and durability, always use genuine Litens components. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket._

Product Features:

• Manufactured by Litens, the largest original equipment tensioner and pulley supplier in the world, to ensure proper form, fit, and performance
• Heavy duty steel pulley construction
• OE-spec sealed ball bearings with synthetic grease and double lip seals for long life
• Installation instructions included

Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear & tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:

• Designed for the majority of automotive vehicle applications on the road today.
• High-quality materials help resist wear and improve belt life
• Features premium lubricated bearings to extend service life
• Meets or exceeds OE quality

This replacement accessory drive belt idler pulley has been engineered to match the function and performance of the original pulley on select vehicle years, makes and models, properly restoring critical vehicle operations.

Product Features:

• Direct replacement – this accessory drive belt idler pulley matches the fit and function of the original equipment pulley on specified vehicles
• Restores performance – fixes a failed, squealing or groaning noise from a worn idler pulley
• Application specific – reverse engineered from the original design on certain vehicle years, makes and models
• Trustworthy quality – backed by team of engineers and quality specialists in the United States

1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.

Product Features:

• Engine oil cooler hose
• Size: 1/2″ x 12′
• Designed for engine oil applications
• 12′ hose length accommodates most applications

This engine oil cooler hose assembly matches the fit and function of the original equipment components for reliable repair and restoration of proper oil circulation between the oil cooler and engine.

Product Features:

• Ideal replacement – this engine oil cooler hose assembly is a direct replacement for the original hose assembly
• Quality materials – this engine oil cooler hose assembly is made from corrosion-resistant materials to ensure the smooth transfer of oil from the engine to the cooler
• Easy to install – no special tools required
• Quality tested – rigorous quality control ensure this hose assembly conforms to product standards

Metal line kit for engine oil coolers. Routes oil lines past exhaust manifolds.

Product Features:

• Metal line kit
• For use in engine oil cooler applications
• Routes oil lines past exhaust manifolds
• Provides protection where standard hoses can fail