Subaru Brat Oil and Lubricants

Castrol EDGE 5W-30 is an advanced full synthetic motor oil and the optimal choice for drivers who want the best combination of wear protection, viscosity control and thermal stability to maximize engine performance. It is one of Castrols strongest engine oils with the strength to maintain this unsurpassed level of engine protection for up to 20,000 miles between oil changes or one year.

Product Features:

• 3X Stronger than the leading full synthetic (1)
• 10X Better high stress performance (2)
• 20,000 miles between oil changes (3)
• (1) Viscosity breakdown as measured in Kurt Orbahn test on 5W-30 grade
• (2) As measured in Seq IX test under high load/torque conditions vs. API SP test limits
• (3) Or one year, whichever comes first
• Approved and Licensed Specifications:
• ACEA A5/B5, C2
• Exceeds API SP/SN PLUS/SN/SM
• GM dexos1 Gen 3
• Meets engine test requirements of Chrysler MS 6395
• Meets Ford WSS-M2C946-B1
• Meets Ford WSS-M2C961-A1

Castrol GTX 10W-30 is a premium conventional motor oil that has been helping to extend engine life for over 50 years. It is specially engineered to prevent harmful build-up of sludge while protecting against new oil splatter formation better than tough industry standards. Sludge is a thick, tar like substance caused by severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals. Sludge can block your engine’s vital oilways like cholesterol and if untreated, can rob an engine of its power and ultimately its life.

Product Features:

• Advanced protection against viscosity and thermal breakdown
• Superior protection against engine sludge
• Premium quality base oils and anti-wear additives to help extend the life of your engine
• Helps minimize oil consumption
• Meets or exceeds the following specifications:
• API SP/SN PLUS/SN/SM
• ILSAC GF-6
• Meets Ford WSS-M2C961-A1

FRAM Conventional High Mileage 5W30 Engine Oil is specially designed with enhanced  additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with  increased efficiency and power. They are specially designed for engines with over 75,000 miles.  FRAM Conventional High Mileage 5W30 Engine Oil will protect domestic and imported vehicles and  equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed  all new car manufacturers’ warranty requirements as well as the stringent industry standards API  SP/CF, and 5W30 grades will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category.

Product Features:

• Formulated with a unique combination of premium base oils and an enhanced additive system
• Provides increased protection in higher mileage engines
• Helps restore seal condition to reduce oil consumption
• Increases protection against high temperature deposits and ring sticking
• Always refer to your vehicles operating manual to select the correct grade oil for your engine.
• Specially formulated for engines with over 75,000 miles to help reduce leaks and oil consumption.

FRAM Engine Oil SAE 10W-40 engine oil utilizes high-quality base stocks and a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 10W-40 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. The FRAM Engine Oil SAE 10W-40 meets the requirements for API SP, SN Plus, SN, SM and earlier API Service Categories.

Product Features:

• Low-speed pre-ignition control
• Chain wear protection
• Piston cleanliness
• Turbo-compatibility
• Low-speed pre-ignition control
• Chain wear protection
• Piston cleanliness
• Turbo-compatibility
• Always refer to your vehicles operating manual to select the correct grade oil for your engine.

Castrol GTX 20W-50 is a premium conventional motor oil that has been helping to extend engine life for over 50 years. It is specially engineered to prevent harmful build-up of sludge while protecting against new oil splatter formation better than tough industry standards. Sludge is a thick, tar like substance caused by severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals. Sludge can block your engine’s vital oilways like cholesterol and if untreated, can rob an engine of its power and ultimately its life.

Product Features:

• Advanced protection against viscosity and thermal breakdown
• Superior protection against engine sludge
• Premium quality base oils and anti-wear additives to help extend the life of your engine
• Helps minimize oil consumption
• Meets or exceeds the following specifications:
• API SP/SN PLUS/SN/SM

30W Small Engine 30W Conventional Oil: 1 Quart

FRAM Engine Oil Full Synthetic SAE 5W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and the latest additive technology to meet the stringent API: SP, SN, SM, SL, SJ, GM dexos1 Gen 3 and ILSAC GF-6A specifications to provide the ultimate protection for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil Full Synthetic SAE 5W-30 and is a fully licensed GM dexos1 Gen 3 motor oil.

Product Features:

• Faster oil flow at start-up
• Fuel efficiency gains over heavier grade oils
• Excellent sludge and varnish protection
• Outstanding thermal and oxidation stability
• Lowers oil vaporization and consumption at extreme conditions
• ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
• Ultimate Engine Protection: FRAM Engine Oil Full Synthetic SAE 5W-30 meets stringent API: SP, SN, SM, SL, SJ, GM Dexos1 Gen 3, and ILSAC GF-6A specifications, ensuring top-tier protection for your engine.
• Advanced Additive Technology: Specifically formulated to prevent low-speed pre-ignition (LSPI), a major concern for vehicles with gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs, reducing the risk of premature engine failure.
• Enhanced Wear Protection: Provides increased wear protection, oxidation, and shear stability over previous oil categories, extending the life of your engine.
• Versatile Compatibility: Suitable for use in carbureted, normally fuel-injected engines, and the rigorous environment of GDI and TGDI engines, offering broad application versatility.
• Fully Licensed GM dexos1 Gen 3: This oil is a fully licensed GM dexos1 Gen 3 motor oil, ensuring it meets the high standards set by General Motors for optimal engine performance.

75,000 miles is more than a mile marker. It’s a signal that your engine is ready for greater protection. That’s when you need Valvoline High Mileage with MaxLife Technology Motor Oil. Its exclusive formula is proven to maximize engine life in cars, trucks, and SUVs with over 75,000 miles. Our mixture is specially developed with a unique combination of synthetic and premium conventional oils to protect your high-mileage motor against wear, friction, heat, and deposits – the four major causes of engine breakdown and expensive repairs. Anti-wear additives defend critical engine components, advanced friction-fighting agents reduce heat and abrasion, added detergents clean the inside of your engine, and premium seal conditioners handle aging seals to prevent leaks. It fights sludge, corrosion and rust that can rob your engine of horsepower, fuel efficiency and longevity. From extreme temperatures and cold starts to stop-and-go traffic and frequent short trips, viscosity modifiers make sure the oil flows more easily, coats more completely, and resists thermal breakdown under even the most intense driving conditions. Its unique mixture curbs contaminants to keep high-mileage engines from burning and consuming oil that can foul spark plugs, creating higher emissions and causing your motor to run roughly.

Product Features:

• MAXLIFE TECHNOLOGY PREVENTS engine breakdown with 40% better wear protection than the industry standard
• REFRESH AGING SEALS AND PREVENT LEAKS with seal conditioners
• REDUCE SLUDGE, DEPOSITS, CORROSION, AND RUST with added detergents – keep motors clean inside
• ENHANCED FRICTION PERFORMANCE HELPS MAXIMIZE POWER with advanced friction-fighting agents
• MEETS OR EXCEEDS ALL REQUIREMENTS of ILSAC GF-6A, API SP, API SN with SN PLUS, API SN
• MaxLife Technology: Valvoline High Mileage with MaxLife Technology is specially formulated to maximize engine life in vehicles with over 75,000 miles, providing superior protection against wear, friction, heat, and deposits.
• Synthetic Blend Composition: This motor oil features a unique combination of synthetic and premium conventional oils, ensuring optimal performance and protection for high-mileage engines.

FRAM Engine Oil Full Synthetic SAE 10W-30 is a full synthetic motor oil blended with high  quality synthetic base stocks and the latest additive technology to provide the ultimate protection  for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI)  and turbo gas-direct engine (TGDI) designs as well as providing increased protection for  carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 10W-30  contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead  to pre-mature engine failure and is a major concern of the automotive industry for vehicles  employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation  and shear stability over previous oil categories.

Product Features:

• Outstanding thermal and oxidation stability
• Excellent sludge and varnish protection
• Faster oil flow at start-up
• Volatility: Lowers oil vaporization and consumption at extreme conditions
• ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
• Ultimate Engine Protection: FRAM Engine Oil Full Synthetic SAE 10W-30 is formulated with high-quality synthetic base stocks and the latest additive technology to provide the ultimate protection for your engine.
• Advanced LSPI Prevention: Contains additive technology specifically designed to prevent low-speed pre-ignition (LSPI), a major concern for vehicles with gas-direct injection (GDI) and turbo gas-direct injection (TGDI) engines.
• Enhanced Wear Protection: Offers increased wear protection, ensuring your engine components remain in optimal condition even under rigorous driving conditions.
• Versatile Engine Compatibility: Suitable for a wide range of engines, including GDI, TGDI, carbureted, and normally fuel-injected engines, making it a versatile choice for various vehicle types.

Castrol GTX 5W-20 is a synthetic blend motor oil with a double-action formula proven to clean away the sludge that can block engine oilways (1) and help prevent new sludge formation. Sludge is a thick, tar like substance caused by severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals. Sludge can block your engine’s vital oilways like cholesterol and if untreated, can rob an engine of its power and ultimately its life. (1) When tested in engines with a high level of sludge

Product Features:

• Premium-quality base oils and anti-wear additives that help extend engine life
• Superior protection against engine sludge
• Advanced protection against viscosity and thermal breakdown
• Superior protection against high-temperature deposits
• Meets or exceeds the following specifications:
• API SP/SN PLUS/SN/SM
• ILSAC GF-6
• Meets or exceeds the following specifications:
• Meets Ford WSS-M2C945-B1
• Meets Ford WSS-M2C960-A1

FRAM Conventional High Mileage 10W30 Engine Oil is specially designed with enhanced  additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with  increased efficiency and power. They are specially designed for engines with over 75,000 miles. FRAM Conventional High Mileage 10W30 Engine Oil will protect domestic and imported vehicles and equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed  all new car manufacturers’ warranty requirements as well as the stringent industry standards API  SP/CF, and 10W30 grade will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category.

Product Features:

• Formulated with a unique combination of premium base oils and an enhanced additive system
• Provides increased protection in higher mileage engines
• Helps restore seal condition to reduce oil consumption
• Increases protection against high temperature deposits and ring sticking
• ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
• Sludge Cleanup and Engine Efficiency: Formulated to help clean out sludge buildup, keeping engines running clean with increased efficiency and power.
• Versatile Compatibility: Protects domestic and imported vehicles and equipment powered by gasoline or light-duty diesel engines, including turbocharged and supercharged engines.
• Meets Stringent Standards: Formulated to meet or exceed all new car manufacturers’ warranty requirements and stringent industry standards API SP/CF, and ILSAC GF-6A Resource Conserving Service Category.

Castrol EDGE High Mileage 10W-30 is an advanced full synthetic motor oil that is specifically designed for vehicles with over 75,000 miles. It’s been engineered to reduce leaks, burnoff and power robbing deposits, but also contains a proprietary additive to protect the emission system. Our Phosphorus Replacement Technology reduces harmful phosphorus to protect the catalytic converter and extend maximum performance. It is the natural choice for drivers who demand maximum performance from their high mileage car.

Product Features:

• Phosphorus Replacement Technology to help extend the life of the emission system
• Reduces leaks, oil burnoff and power robbing deposits
• 15,000 miles between oil changes (1)
• (1) Or one year, whichever comes first
• Meets or exceeds the following specifications:
• API SP/SN PLUS/SN/SM
• ILSAC GF-6

CV Joint Grease

Febi stands for Solutions Made in Germany and is one of the leading manufacturers and suppliers of car and truck spare parts in the independent aftermarket.

Product Features:

• Original Febi spare parts
• Proven OE: Febi fulfills all eligibility requirements
• High driving comfort through the use of perfectly matched materials and impeccable design