Studebaker E7 Parts

Name: Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny
Brand: Holley
SKU: 0-80670
Price: 682.99 USD
Rating: 4.0 (6 reviews)

Studebaker E7 Performance and Racing Products

from

$682.99

Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.

Product Features:

Vibratory Polished For Good Looks
Optimized Street Calibration That Works Out Of The Box
Factory Preset Electric Choke For Easy Startups
Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
No Unnecessary Trips Back To The Parts Store
Limited Lifetime Warranty
100% Wet Flow Tested By Holley Technicians
Arrives Ready To Run

from

$699.99

Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.

Product Features:

Vibratory Polished For Good Looks
Optimized Street Calibration That Works Out Of The Box
Factory Preset Electric Choke For Easy Startups
Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
No Unnecessary Trips Back To The Parts Store
Limited Lifetime Warranty
100% Wet-Flow Tested To Assure It Arrives Ready To Run
Street Ready; Out Of The Box

from

$499.99

Holley’s new 0-80457SA is constructed from aluminum which compared to its zinc counterpart equates to a weight savings of 40%! Holley’s aluminum 0-80457SA will hold its shine longer and also can be hand polished for a custom look! Its 600 CFM of airflow,

Product Features:

Vibratory Polished For Good Looks

from

$699.99

Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.

Product Features:

Vibratory Polished For Good Looks
Optimized Street Calibration That Works Out Of The Box
Factory Preset Electric Choke For Easy Startups
Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
No Unnecessary Trips Back To The Parts Store
Limited Lifetime Warranty
100% Wet Flow Tested By Holley Technicians
Arrives Ready To Run

Studebaker E7 Belts and Hoses

from

$24.99

Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:

Fiber-loaded rubber mount adds flexibility along the belt and provides greater lateral stability on the pulley
Ground to ensure precise dimensional control of the top width and sidewall for proper adjustment to the pulley.
Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
Resists oil, heat, ozone, weather and aging for improved belt life
Meets or exceeds SAE J636C specifications

from

$27.49

Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
The shape is ground to ensure precise dimensional control of the top width and sidewall for a correct fit to the pulley.
Thermally active pull cords for maintenance-free operation when the strap is properly installed and tensioned
Resists oil, heat, ozone, weather, and decay to improve belt life
Meets or exceeds SAE J636C specifications

from

$34.49

Heavy-duty flexible hose designed to replace straight or curved coolant hoses. The benefit is maximum coverage with minimum inventory. Hose inside diameter remains constant from end to end. No convolutions inside hose so tube is smooth, allowing free coolant flow. Approved for marine applications.

Product Features:

Engineered to resist electrochemical degradation, the leading cause of hose failure
Built-in steel spiral wire allows for medium sized curves without kinking or collapsing
EPDM tube and Neoprene cover for extended service life
Polyester fabric reinforcement vulcanizes without unnecessary deformation in connections
Resistant to heat, oil and ozone
Meets SAE 20R5 Type EC Class D-2 specifications
Temperature range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Caution: Do not use for fuel or oil transportation applications.
Caution: Do not use for fuel or oil transfer applications.

from

$51.99

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Engineered to resist electrochemical degradation, the leading cause of hose failure
Pre-shaped to fit and ensure a perfect seal
EPDM tube; synthetic fiber knit reinforcement; heat, ozone- and chemical coolant-resistant EPDM cover
Meets the requirements of SAE 20R4, Class D2 and DIN 73411, Class A (except for tolerances)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing clamps and connectors each time a new radiator hose is installed.
Caution: Do not use for fuel or oil transfer applications

from

$30.49

Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.

Product Features:

Improved sealing surface for improved leak resistance
Their great flexibility makes installation easy
Maximum vehicle coverage with minimal inventory
Heat, oil and ozone resistant
Rated for SAE 20R5 Class D-2 performance
Temperature range: up to +257 degrees Celsius. F (+125 Deg. C)
Note: Gates recommends replacing clamps each time a new coolant hose is installed
Warning: Do not use for fuel or oil transfer applications

Studebaker E7 Transmission Parts

from

$23.49

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$10.49

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$3.29

Design type: springless; single-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$10.99

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$46.99

With advanced load-carrying capacity and compact design, tapered roller bearings are used in wheel bearings, transmissions, differentials, transfer cases and other miscellanous applications. FAG manufacturers over 100 million tapered roller bearings annually.

Product Features:

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$13.29

Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$6.99

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$73.99

Product Features:

BUILT TO LAST: Advanced heat treatment process for strength
PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$17.99

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: spring loaded; single-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

Studebaker E7 Engine Parts

from

$105.99

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Head sets contain gaskets and seals necessary for a valve grind or head reconditioning job
Application specific design to ensure a perfect fit and premium seal
Premium quality parts you can trust
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Contains all the parts needed to complete the repair unless otherwise noted

from

$2.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$0.43

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$198.99

Full Sets contain all the gaskets and seals necessary for a complete engine overhaul
Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$10.49

Formulated for prelubrication cam lobes, lifters & engine bearings
Increases load carrying capacity
Holds fast to surfaces
Exacting tolerances
Meets or exceeds OEM specifications
4.0 oz. Squeeze Container

from

$11.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SUPERIOR SEAL – Manufactured with rubber compounds to ensure a consistent and long-life seal across the entire oil pan
PREVENTS OVERTIGHTENING – Torque limiters help eliminate overtightening and gasket splitting and extruding (where applicable)
OE-STYLE REPLACEMENT GASKET – Engineered for OE-style molded rubber gasket replacement
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
ENGINEERING EXPERTISE – Parts are designed, tested, validated and approved by Fel-Pro engineers through rigorous research and development
ENGINEERING EXPERTISE – Parts are designed, tested, validated and approved by Fel-Pro engineers through rigorous research and development

from

$2.99

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$3.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Includes all parts needed to complete the repair

from

$22.99

RIGHT TYPE – Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
QUALITY MATERIALS – Each valve stem seal features materials based on the specific application for your vehicle repair
ENGINEERING EXPERTISE – Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
INSTALLATION AID – Installation tool included to protect inner lip of seal from damage during seal installation
COVERAGE – Available for domestic and foreign nameplate vehicles

Studebaker E7 Air Intakes

from

$671.99

Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.

Product Features:

Vibratory Polished For Good Looks
Optimized Street Calibration That Works Out Of The Box
Manual Choke For Precise Cold Start Control
Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
No Unnecessary Trips Back To The Parts Store
Limited Lifetime Warranty
100% Wet Flow Tested By Holley Technicians
Arrives Ready To Run

from

$749.99

4150 ALUM DP 750 CFM ELECTRIC CHOKE

from

$531.99

The Street HP uses the best features from Holley’s race Bred 4150 HP carbs, but tamed for street and light competition use. The contoured main body from the 4150 HP has a tumble polished shiny finish. The metering system includes a timed spark port for a vacuum advance distributor and is calibrated for a hot street and strip engine setup for outstanding throttle response and drivability. A street HP base plate is used so there are plenty of vacuum ports for power brakes, PCV, etc.

Product Features:

Vibratory Polished Alum Good Looks/Weight Savings/Lasting Shine
Performance Upgrade For Stock To Mildly Modified Vehicles
Universal Calibration For Easy Bolt-On Performance
Man. Choke Cable Hand Controlled For Cold Start Control
Vacuum Secondaries For Use On Wide Variety Of Vehicles
Dual Feed Fuel Inlets For Constant High Volume Fuel Delivery

from

$649.99

Competition fuel curves provide safe and reliable horsepower for high performance race engines.

Product Features:

Gold Dichromate Finish For Corrosion Resistance w/Classic Look
Man. Choke Cable Hand Controlled For Cold Start Control
50CC Accelerator Pump For Add. Fuel Under Initial Acceleration
Power Valve Blow-Out Protection
100% Wet-Flow Tested To Assure It Arrives Ready To Run

from

$1649.99

The Gen 3 utilizes high capacity fuel bowls which feature 20% more fuel capacity to eliminate starvation, integrated fuel shelf to minimize fuel aeration and internal baffling to control fuel slosh. Other features include all aluminum construction, 12 hole billet booster inserts, fully tunable billet metering blocks, adjustable external linkage, throttle position sensor mounting points and knurled (hand adjustable) curb idle screws Each calibration has been dyno and track tested to deliver proven performance!

Product Features:

All Aluminum Construction Saves 3.8 lbs. Over Original Models
28% Weight Savings
Calibrations For Todays Larger Race Engines and New Fuels
Fully Machined From Venturi Throat To Throttle Bore
Integrated Idle Bypass Valve Allows For Adjustment Of Idle
12 Hole Billet Booster Superior Atomization/Throttle Response
Metering Blocks Feature Improved True Gasket Sealing
Dual 50CC Accelerator Pumps Fuel From Idle To Full Throttle
Fuel Bowl Provides 20% More Fuel Capacity Controls Slosh
Clear Sight Windows On Sides Of Bowl For Fuel Level Adjustments
Drain Plug On Bowl Provides Easy Access To Empty Bowl
Contoured Hex Head Squirter Screws For Streamlined Airflow

from

$1799.99

All Aluminum Construction Saves 3.8 lbs. Over Original Models
28% Weight Savings
Calibrations For Todays Larger Race Engines and New Fuels
Fully Machined From Venturi Throat To Throttle Bore
Integrated Idle Bypass Valve Allows For Adjustment Of Idle
12 Hole Billet Booster Superior Atomization/Throttle Response
Metering Blocks Feature Improved True Gasket Sealing
Dual 50CC Accelerator Pumps Fuel From Idle To Full Throttle
Fuel Bowl Provides 20% More Fuel Capacity Controls Slosh
Clear Sight Windows On Sides Of Bowl For Fuel Level Adjustments
Drain Plug On Bowl Provides Easy Access To Empty Bowl
Contoured Hex Head Squirter Screws For Streamlined Airflow

from

$999.99

These carburetors that are intended for use with superchargers, and have a unique capability that allows their power Valves to reference the intake Manifold vacuum below the supercharger. This allows the power valve to operate as it should, based off intake manifold vacuum. A power valve provides further enrichment to the main metering system under load (low vacuum) conditions. Without this external referencing, the power valve would be reading the Supercharger boost pressure, which has no bearing on the engine load.

Product Features:

Tumble Polished Shiny Finish For Good Looks
Manual Choke For Precise Cold Start Control
Dual Accelerator Pumps For Add Fuel Under Initial Acceleration
Dual Feed Fuel Inlets For Constant High Volume Fuel Delivery
Mechanical Secondaries For Perfect Off The Line Launches
Lightweight Vehicles w/Auto Trans w/High Stall/Low Gearing
Boost Power Valve For Proper Enrichment Under Acceleration
100% Wet Flow Tested By Holley Technicians
Arrives Ready To Run

from

$699.99

4150 ALUM DP 650 ELECT CHOKE

from

$849.99

4150 Race Carbs

from

$1249.99

Holley engineers have taken the state-of-the-art Gen 3 Ultra carburetors and created a budget friendly version that is perfect for street/strip applications as well as all out bracket or sportsman drag cars. The new Holley SP Dominator carburetors feature the patent pending Gen 3 main-body which is 5/16″ taller than the previous generation! This new height allowed for larger radius air entries to deliver smoother flow that equates to improved throttle response and consistency. An extended air cleaner flange is incorporated for easy air scoop attachment when using the available air scoop adapter. Other features include all aluminum construction, tunable billet metering blocks, throttle position sensor mounting points and knurled (hand adjustable) curb idle screws. Each calibration has been dyno and track tested to deliver proven performance!

Product Features:

All Aluminum Construction Saves 3.8 lbs. Over Original Models
28% Weight Savings
Shiny With Billet Aluminum Metering Block and Black Hardware
Calibrations Optimized For Todays Race Engines and New Fuels
Fully Machined From Venturi Throat To Throttle Bore For Perf
Annular Booster Deliver Excellent Signal and Throttle Response
Screw In Air Bleeds Offer Precise Tuning Capabilities
Metering Blocks Feature Improved True Gasket Sealing
Dual 50CC Accelerator Pumps Fuel From Idle To Full Throttle
4 Corner Idle Allows You To Precisely Control Your Idle System
Clear Sight Windows On Fuel Inlet Side For Fuel Level Adjustment
Notched Float and Jet Extension Are Factory Installed

from

$599.99

Street Avenger carburetors are known to bolt on right out of the box and Holley is excited to announce the addition of our new 2bbl Street Avenger models available in 350 and 500 CFM. Street Avenger carburetors have great features such as optimized street calibrations; three vacuum ports for all necessary vacuum accessories; factory preset electric choke for easy startups; built-in fuel filters; and an included 3/8″ fuel line connection so there are no unnecessary trips back to the parts store.

Product Features:

Vibratory Polished For Good Looks
Optimized Street Calibration That Works Out Of The Box
Factory Preset Electric Choke For Easy Startups
Built In No Trouble Fuel Inlet Filter
Provides Precise Fuel Control For Low End Torque/Acceleration
Gen Iv No Trouble Power Valve
Three Vacuum Ports [1 Pcv/Brake 1 Timed Spark 1 Full]
Limited Lifetime Warranty Defects In Material/Workmanship
100% Wet Flow Tested By Holley Technicians
Arrives Ready To Run

from

$899.99

Holley Double Pumper(R) carburetors are a perfect performance upgrade for hot street cars and race vehicles. Double Pumper carburetors are an American icon when it comes to performance carburetors. From their roots as the premier carburetor on many factory muscle cars to powering thousands of vehicles across the finish line, the Double Pumper is a great choice whether you are burning up the street or the quarter mile.

Product Features:

Metering Blocks Base Plate For Good Looks True Gasket Sealing
Optimized Street/Strip Calibration That Works Out Of The Box
Factory Preset Electric Choke For Easy Startups
Mechanical Secondaries For Awesome Tire Turning Performance
4 Corner Idle Allows You To Precisely Control Your Idle System
Clear Fuel Level Sight Glass No Mess Fuel Level Adjustments
Aluminum Construction For A 43% Weight Savings
Lightweight Vehicles w/Auto Trans w/High Stall/Low Gearing
100% Wet Flow Tested By Holley Technicians
Arrives Ready To Run

from

$26.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for repair applications
Unsurpassed quality you can trust
Validated for fit, form, and function
Includes all parts needed to complete the repair
Includes all parts needed to complete the repair

Looking for the best Studebaker E7 aftermarket replacement parts? Replacing worn and broken parts on your Studebaker E7? Check out our online catalog to find the best selection of aftermarket Studebaker E7 parts as well as real user reviews on Studebaker E7 replacement parts. Make an informed decision about every component you add to your E7.

At Advance Auto, we’ve got you covered when it comes to getting your Studebaker E7 in tip top condition. We’ve got over 181 Studebaker E7 parts to choose from in popular categories like Performance and Racing Products, Belts and Hoses and Transmission Parts. If you’re looking for the best prices, try searching our Studebaker E7 parts catalog to compare OEM and aftermarket parts for your Studebaker E7.

Whether you need Studebaker E7 body parts, interior components, or custom Studebaker E7 parts you can find them online at Advance Auto. Want to order your Engine Parts online? Or maybe you need your Studebaker Air Intakes same day? No problem, you can pick up E7 parts in person at locations across the country, or have them delivered to straight to your door after ordering online. Finding a great deal on new and used Studebaker E7 parts has never been easier.

Advance Auto customers frequently search for the following types of Studebaker E7 auto parts. Check out customer reviews and ratings, and compare prices on the following Studebaker E7 parts:

People also search Advance Auto for these popular years of the Studebaker E7:

Studebaker E7 Parts

Holley – Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny (Part No.0-80670)

Holley – Prem Street Carbs (Avengers) (Part No.0-80570)

Holley – Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny (Part No.0-80457S)

Holley – Prem Street Carbs (Avengers) (Part No.0-80870)

Gates – Automotive XL High Capacity V-Belt (Part No.7619)

Gates – Automotive XL High Capacity V-Belt (Part No.7590)

Gates – Green Stripe Heavy-Duty Vulco-Flex Coolant Hose (Part No.26504)

Gates – Premium Molded Coolant Hose (Part No.21256)

Gates – Vulco-Flex II Flexible Coolant Hose (Part No.25251)

National – Differential Pinion Seal (Part No.5778)

Driveworks – Oil Seal (Part No.S-5778)

National – Multi-Purpose Seal (Part No.240698)

National – Multi-Purpose Seal (Part No.8160S)

FAG US – Cone (Part No.K387-A)

National – Bearing Race (Part No.25821)

Driveworks – Taper Bearing Cup (Part No.S-15245)

National – Multi-Purpose Bearing (Part No.1307)

National – Manual Transmission Output Shaft Seal (Part No.450308)

Felpro – Engine Cylinder Head Gasket Set (Part No.HS 7669 S-2)

Felpro – Fuel Pump Bowl Gasket (Part No.773)

Sealed Power – Engine Valve Spring Retainer Keeper (Part No.VK-115)

Felpro – Engine Gasket Set (Part No.FS 7669 S-2)

Sealed Power – Engine Assembly Lubricant (Part No.55-400)

Felpro – Engine Oil Pan Gasket Set – Blue Stripe cork-rubber (Part No.OS 10040 C)

Victor Reinz – Fuel Pump Mounting Gasket (Part No.71-13599-00)

Felpro – Fuel Pump Mounting Gasket (Part No.6579)

Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 10058)

Holley – Prem Street Carbs (Avengers) (Part No.0-81570)

Holley – 4150 ALUM DP 750 CFM ELECTRIC CHOKE (Part No.0-4779SAE)

Holley – Street Carbs (Part No.0-3310S)

Holley – Performance and Race Carburetor: 500 CFM, No Choke, 2 Barrel, 2300 Bore, Single Inlet (Part No.0-4412CT)

Holley – Professional Race Carburetor: 1050 CFM, No Choke, 4 Barrel, 4500 Bore, Dual Inlet, Shiny (Part No.0-80903BK)

Holley – Professional Race Carburetor: 1250 CFM, No Choke, 4 Barrel, 4500 Bore, Dual Inlet, Shiny (Part No.0-80908BK)

Holley – Performance and Race Carburetor: 750 CFM, Manual Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny (Part No.0-80573S)

Holley – 4150 ALUM DP 650 ELECT CHOKE (Part No.0-4777SAE)

Holley – 4150 Race Carbs (Part No.0-67200BK)

Holley – Professional Race Carburetor: 1050 CFM, No Choke, 4 Barrel, 4500 Bore, Dual Inlet, Shiny (Part No.0-80689)

Holley – Street Carburetor: 500 CFM, Electric Choke, 2 Barrel, 2300 Bore, Single Inlet, Shiny (Part No.0-80500)

Holley – Performance and Race Carburetor: 650 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny (Part No.0-76650BL)

Felpro – Engine Intake Manifold Gasket Set (Part No.MS 9001 SH-1)