Studebaker Cruiser Belts and Hoses
Top Studebaker Cruiser Belts and Hoses Categories
We carry over 41 Belts and Hoses in inventory for the Studebaker Cruiser. If you’re looking for aftermarket Belts and Hoses for your Studebaker Cruiser, check out all these categories:
Essential Studebaker Cruiser Belts and Hoses
Dayco – Bottom Cog V-Belt; 38.75 Inch Long, Exact Fit Premium Quality (Part No.15388)
from
$13.49
Dayco has combined raw-edge construction and a smooth top to ensure high performance on vehicles and drives that utilize V-belts. The Dayco high performance V-belt delivers more flexibility and increases airflow around the belt so it runs cooler and lasts longer. Three plies of neoprene impregnated fabric resist heat, oil and grease while a specially-formulated treatment of the polyester cord provides the strength, stability and reliability that are required for one of the most innovative, top-performing V-belts.
Product Features:
See More
Product Features:
- Provides greater durability and flexibility 35% stronger than all previous versions
- Prevents electromechanical interference issues on modern vehicles
- Resists heat, oil and grease
Driveworks – Automotive V-Belt, Driveworks (Part No.53017)
from
$5.29
Driveworks engineered to conform to high mileage, worn or misaligned drives without a sacrifice in quiet, long-lasting performance. Constructed with Aramid reinforced EPDM compounds, it delivers more than OE required quality… it delivers the solution to troublesome drive problems. Driveworks Poly-Rib Belts meet or exceed SAE J1459 and SAE J2432 specifications.
Product Features:
See More
Product Features:
- Aramid noise resistant fibers embedded in the rubber make this belt run quieter in worn or misaligned pulleys
- No-Noise Advanced Design EPDM rubber compound for quiet extended life
Dayco – Bottom Cog V-Belt; 37.5 Inch Long, Exact Fit Premium Quality (Part No.15375)
from
$16.29
Dayco has combined raw-edge construction and a smooth top to ensure high performance on vehicles and drives that utilize V-belts. The Dayco high performance V-belt delivers more flexibility and increases airflow around the belt so it runs cooler and lasts longer. Three plies of neoprene impregnated fabric resist heat, oil and grease while a specially-formulated treatment of the polyester cord provides the strength, stability and reliability that are required for one of the most innovative, top-performing V-belts.
Product Features:
See More
Product Features:
- Provides greater durability and flexibility – 35% stronger than all previous versions
- Prevents electromechanical interference issues on modern vehicles
- Resists heat, oil and grease
Dayco – Bottom Cog V-Belt; 38 Inch Long, Exact Fit Premium Quality (Part No.15380)
from
$15.49
Dayco has combined raw-edge construction and a smooth top to ensure high performance on vehicles and drives that utilize V-belts. The Dayco high performance V-belt delivers more flexibility and increases airflow around the belt so it runs cooler and lasts longer. Three plies of neoprene impregnated fabric resist heat, oil and grease while a specially-formulated treatment of the polyester cord provides the strength, stability and reliability that are required for one of the most innovative, top-performing V-belts.
Product Features:
See More
Product Features:
- Provides greater durability and flexibility – 35% stronger than all previous versions
- Prevents electromechanical interference issues on modern vehicles
- Resists heat, oil and grease
Driveworks – Automotive V-Belt, Driveworks (Part No.55015)
from
$5.49
The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.
Product Features:
See More
Product Features:
- This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
- Polyester cords provide extreme tension-holding capability for longer belt life
- The raw edge belt design delivers the maximum gripping power
- The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration
Gates – Vulco-Flex II Flexible Coolant Hose (Part No.25530)
from
$35.49
Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.
Product Features:
See More
Product Features:
- Improved sealing surface for increased leak resistance
- High flexibility for easy installation
- Maximum vehicle coverage with minimal inventory
- Heat, oil and ozone resistant
- Rated for SAE 20R5 Class D-2 performance
- Temperature range: up to +257 degrees Celsius. F (+125 Deg. C)
- Note: Gates recommends replacing clamps each time a new coolant hose is installed
- Warning: Do not use for fuel or oil transfer applications
Dayco – Flex Radiator Hoses; EPDM Rubber, 19.88 Inch Long, 1.5 Inch Inner Dia. (Part No.81181)
from
$21.99
The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent splitting, ballooning and elongation as well as resist ozone and other detrimental environmental elements, coolants and temperature variations of -40øF (-40øC) to +257øF (+125øC). With corrugations that provide excellent hose flexibility without flattening or collapsing, the Dayco flex radiator hose also features a helical steel coil spring for increased flexibility.
Product Features:
See More
Product Features:
- Designed to meet OE specifications
- Not suitable for oil or heat transfer
- Meets SAE J20R4, Class D-2 requirements for improved service hoses
- This hose is designed to prevent splitting, ballooning, and elongation
Gates – Vulco-Flex II Flexible Coolant Hose (Part No.25527)
from
$26.99
Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.
Product Features:
See More
Product Features:
- Improved sealing surface for increased leak resistance
- High flexibility for easy installation
- Maximum vehicle coverage with minimum inventory
- Heat, oil and ozone resistant
- Rated for SAE 20R5 Class D-2 performance
- Temperature range: up to +257 degrees Celsius. F (+125 Deg. C)
- Note: Gates recommends replacing clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transportation applications.
Dayco – Flex Radiator Hoses; EPDM Rubber, 15 Inch Long, 1.75 Inch to 1.5 Inch Inner Dia. (Part No.81241)
from
$19.49
The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent splitting, ballooning and elongation as well as resist ozone and other detrimental environmental elements, coolants and temperature variations of -40øF (-40øC) to +257øF (+125øC). With corrugations that provide excellent hose flexibility without flattening or collapsing, the Dayco flex radiator hose also features a helical steel coil spring for increased flexibility.
Product Features:
See More
Product Features:
- Designed to meet OE specifications
- Not suitable for oil or heat transfer
- Meets SAE J20R4, Class D-2 requirements for improved service hoses
- This hose is designed to prevent splitting, ballooning, and elongation
Gates – Premium Molded Coolant Hose (Part No.20386)
from
$41.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
Product Features:
See More
Product Features:
- Specifically designed materials resist collapse under vacuum
- Designed to resist electrochemical degradation, which is the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube; knitted synthetic fiber reinforcement; EPDM lid resistant to heat, ozone and chemical refrigerants
- Meets the requirements of SAE 20R4, Class D2 and DIN 73411, Class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing clamps and connectors each time a new cooling hose is installed.
- Caution: Do not use for fuel or oil transfer applications
Dayco – Flex Radiator Hoses; EPDM Rubber, 19.5 In. Long, 1.75 In. to 1.5 In. Inner Dia. (Part No.81261)
from
$14.99
The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent splitting, ballooning and elongation as well as resist ozone and other detrimental environmental elements, coolants and temperature variations of -40øF (-40øC) to +257øF (+125øC). With corrugations that provide excellent hose flexibility without flattening or collapsing, the Dayco flex radiator hose also features a helical steel coil spring for increased flexibility.
Product Features:
See More
Product Features:
- Designed to meet OE specifications
- Not suitable for oil or heat transfer
- Meets SAE J20R4, Class D-2 requirements for improved service hoses
- This hose is designed to prevent splitting, ballooning, and elongation
Gates – Safety Stripe Standard Straight Heater Hose (Sold by foot) (Part No.28412)
from
$3.99
Premium hose constructed for long service life.
Product Features:
See More
Product Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transportation applications.
- CAUTION: Do not use for fuel or oil transfer applications
- PLEASE NOTE: Item is priced and sold by the foot. See store for details.
Gates – Vulco-Flex II Flexible Coolant Hose (Part No.25478)
from
$18.79
Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.
Product Features:
See More
Product Features:
- Improved sealing surface for improved leak resistance
- High flexibility for easy installation
- Maximum vehicle coverage with minimal inventory
- Resistant to heat, oil and ozone
- Rated for SAE 20R5 Class D-2 performance
- Temperature range: up to +257 degrees Celsius. F (+125 Deg. C)
- Note: Gates recommends replacing clamps and connectors each time a new radiator hose is installed.
- Caution: Do not use for fuel or oil transfer applications
Dayco – Flex Radiator Hoses; EPDM Rubber, 15.75 Inch Long, 1.5 Inch Inner Dia. (Part No.81161)
from
$26.99
The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent splitting, ballooning and elongation as well as resist ozone and other detrimental environmental elements, coolants and temperature variations of -40øF (-40øC) to +257øF (+125øC). With corrugations that provide excellent hose flexibility without flattening or collapsing, the Dayco flex radiator hose also features a helical steel coil spring for increased flexibility.
Product Features:
See More
Product Features:
- Designed to meet OE specifications
- Not suitable for oil or heat transfer
- Meets SAE J20R4, Class D-2 requirements for improved service hoses
- This hose is designed to prevent splitting, ballooning, and elongation
Gates – Vulco-Flex II Flexible Coolant Hose (Part No.25480)
from
$25.49
Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.
Product Features:
See More
Product Features:
- Improved sealing surface for improved leak resistance
- High flexibility for easy installation
- Maximum vehicle coverage with minimum inventory
- Heat, oil and ozone resistant
- Rated for SAE 20R5 Class D-2 performance
- Temperature Range: up to +257 Deg. F (+125 Deg. C)
- Note: Gates recommends replacing clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transportation applications.
Gates – Straight Heater Hose: EPDM, Direct Fit, 0.625" Inside Diameter (sold by foot) (Part No.28411)
from
$1.99
Premium hose constructed for long service life.
Product Features:
See More
Product Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- CAUTION: Do not use for fuel or oil transfer applications
- PLEASE NOTE: Item is priced and sold by the foot. See store for details.
Studebaker Cruiser Belts and Hoses Categories
Helping You Find the Right Belts and Hoses for Your Studebaker Cruiser
You love your Cruiser. So we’ve made it easier than ever to help you find Studebaker Cruiser Belts and Hoses in our online catalog. Our inventory holds 41 aftermarket and OEM Belts and Hoses for your Studebaker Cruiser, ranging from $1.99 to $45.99.
We offer parts from 3 brands trusted to make quality Belts and Hoses for your Studebaker Cruiser. Before you buy, take some time to read through customer reviews. We currently have 110 reviews of Studebaker Cruiser Belts and Hoses from previous customers. Some of the top rated parts include Automotive V-Belt, Driveworks with 5.0 stars and Automotive V-Belt, Driveworks with 4.3 stars.
Find your Cruiser Belts and Hoses here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Studebaker Cruiser part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Belts and Hoses Brands for Your Studebaker Cruiser
Our inventory holds Belts and Hoses for your Studebaker Cruiser from 3 trusted brands. You’ll find OEM and aftermarket parts from brands like Dayco, Gates, and DriveWorks, all of which can keep that Studebaker happy.
We have Dayco parts available for your Studebaker Cruiser in categories like Engine Cooling Hoses and Serpentine and V Belts. Some of the top-rated Dayco parts in these categories are:
from
$14.99
(3)
Flex Radiator Hoses; EPDM Rubber, 19.5 In. Long, 1.75 In. to 1.5 In. Inner Dia.
Upper Radiator Hoses
Top-Rated Dayco Belts and Hoses
Leading Dayco Belts and Hoses
We carry Dayco brand parts for your Studebaker Cruiser across several catalog categories, including Serpentine and V Belts. Some of our most reviewed Dayco parts include:
FAQs for Studebaker Cruiser Belts and Hoses
What are the most purchased Belts and Hoses for the Studebaker Cruiser?
Out of 41 Belts and Hoses for the Studebaker Cruiser, the most popular in our inventory are:
What are the top-rated Studebaker Cruiser Belts and Hoses?
Top-rated Belts and Hoses for your Studebaker Cruiser based on customer reviews/ratings are:
