Studebaker 4E2D Parts

Studebaker 4E2D Performance and Racing Products

Holley – Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny (Part No.0-80457S)

Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny

from

$499.99
Holley’s new 0-80457SA is constructed from aluminum which compared to its zinc counterpart equates to a weight savings of 40%! Holley’s aluminum 0-80457SA will hold its shine longer and also can be hand polished for a custom look! Its 600 CFM of airflow,

Product Features:
  • Vibratory Polished For Good Looks
See More

(45 reviews)
View Product

Holley – Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny (Part No.0-80670)

Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny

from

$682.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.

Product Features:
  • Vibratory Polished For Good Looks
  • Optimized Street Calibration That Works Out Of The Box
  • Factory Preset Electric Choke For Easy Startups
  • Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
  • No Unnecessary Trips Back To The Parts Store
  • Limited Lifetime Warranty
  • 100% Wet Flow Tested By Holley Technicians
  • Arrives Ready To Run
See More

(6 reviews)
View Product

Holley – Prem Street Carbs (Avengers) (Part No.0-80870)

Prem Street Carbs (Avengers)

from

$699.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.

Product Features:
  • Vibratory Polished For Good Looks
  • Optimized Street Calibration That Works Out Of The Box
  • Factory Preset Electric Choke For Easy Startups
  • Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
  • No Unnecessary Trips Back To The Parts Store
  • Limited Lifetime Warranty
  • 100% Wet Flow Tested By Holley Technicians
  • Arrives Ready To Run
See More
View Product

Holley – Prem Street Carbs (Avengers) (Part No.0-80570)

Prem Street Carbs (Avengers)

from

$699.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.

Product Features:
  • Vibratory Polished For Good Looks
  • Optimized Street Calibration That Works Out Of The Box
  • Factory Preset Electric Choke For Easy Startups
  • Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
  • No Unnecessary Trips Back To The Parts Store
  • Limited Lifetime Warranty
  • 100% Wet-Flow Tested To Assure It Arrives Ready To Run
  • Street Ready; Out Of The Box
See More
View Product

Studebaker 4E2D Belts and Hoses

Gates – Green Stripe Heavy-Duty Vulco-Flex Coolant Hose (Part No.26504)

Green Stripe Heavy-Duty Vulco-Flex Coolant Hose

from

$34.49
Heavy-duty flexible hose designed to replace straight or curved coolant hoses. The benefit is maximum coverage with minimum inventory. Hose inside diameter remains constant from end to end. No convolutions inside hose so tube is smooth, allowing free coolant flow. Approved for marine applications.

Product Features:
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Built-in steel spiral wire allows for medium sized curves without kinking or collapsing
  • EPDM tube and Neoprene cover for extended service life
  • Polyester fabric reinforcement vulcanizes without unnecessary deformation in connections
  • Resistant to heat, oil and ozone
  • Meets SAE 20R5 Type EC Class D-2 specifications
  • Temperature range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Caution: Do not use for fuel or oil transportation applications.
  • Caution: Do not use for fuel or oil transfer applications.
See More
View Product

Gates – Premium Molded Coolant Hose (Part No.21256)

Premium Molded Coolant Hose

from

$51.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Pre-shaped to fit and ensure a perfect seal
  • EPDM tube; synthetic fiber knit reinforcement; heat, ozone- and chemical coolant-resistant EPDM cover
  • Meets the requirements of SAE 20R4, Class D2 and DIN 73411, Class A (except for tolerances)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing clamps and connectors each time a new radiator hose is installed.
  • Caution: Do not use for fuel or oil transfer applications
See More
View Product

Gates – Automotive XL High Capacity V-Belt (Part No.7590)

Automotive XL High Capacity V-Belt

from

$27.49
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:
  • Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
  • The shape is ground to ensure precise dimensional control of the top width and sidewall for a correct fit to the pulley.
  • Thermally active pull cords for maintenance-free operation when the strap is properly installed and tensioned
  • Resists oil, heat, ozone, weather, and decay to improve belt life
  • Meets or exceeds SAE J636C specifications
See More
View Product

Gates – Automotive XL High Capacity V-Belt (Part No.7619)

Automotive XL High Capacity V-Belt

from

$24.99
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:
  • Fiber-loaded rubber mount adds flexibility along the belt and provides greater lateral stability on the pulley
  • Ground to ensure precise dimensional control of the top width and sidewall for proper adjustment to the pulley.
  • Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
  • Resists oil, heat, ozone, weather and aging for improved belt life
  • Meets or exceeds SAE J636C specifications
See More
View Product

Search Over 160 Studebaker 4E2D Parts Online for Delivery or Pick Up

Looking for the best Studebaker 4E2D aftermarket replacement parts? Replacing worn and broken parts on your Studebaker 4E2D? Check out our online catalog to find the best selection of aftermarket Studebaker 4E2D parts as well as real user reviews on Studebaker 4E2D replacement parts. Make an informed decision about every component you add to your 4E2D.

At Advance Auto, we’ve got you covered when it comes to getting your Studebaker 4E2D in tip top condition. We’ve got over 160 Studebaker 4E2D parts to choose from in popular categories like Suspension Parts, Performance and Racing Products and Belts and Hoses. If you’re looking for the best prices, try searching our Studebaker 4E2D parts catalog to compare OEM and aftermarket parts for your Studebaker 4E2D.

Whether you need Studebaker 4E2D body parts, interior components, or custom Studebaker 4E2D parts you can find them online at Advance Auto. Want to order your Interior Products online? Or maybe you need your Studebaker Wheels and Tires same day? No problem, you can pick up 4E2D parts in person at locations across the country, or have them delivered to straight to your door after ordering online. Finding a great deal on new and used Studebaker 4E2D parts has never been easier.

Popular Types of Parts for Studebaker 4E2D

Advance Auto customers frequently search for the following types of Studebaker 4E2D auto parts. Check out customer reviews and ratings, and compare prices on the following Studebaker 4E2D parts:

Find Parts for Your Studebaker 4E2D by Year

People also search Advance Auto for these popular years of the Studebaker 4E2D:

More Popular Parts for All Makes