Sterling Bullet 45 Engine Parts
Top Sterling Bullet 45 Engine Parts Categories
We carry over 12 Engine Parts in inventory for the Sterling Bullet 45. If you’re looking for aftermarket Engine Parts for your Sterling Bullet 45, check out all these categories:
Essential Sterling Bullet 45 Engine Parts
Dorman – Engine Oil Pan: Direct Fit, Steel, Center Sump (Part No.264-470)
from
$188.99
This engine oil pan is precision-engineered to match the original equipment pan on specific vehicle years, makes and models for a reliable replacement.
Product Features:
See More
Product Features:
- Direct replacement – this engine oil pan is made to match the original pan on specific vehicles
- Complete assembly – includes replacement pan and drain plugs to match original components
- Durable design – high-strength coating prevents future corrosion
- Trustworthy value – backed by team of engineers and quality control experts in the United States
Gates – Molded Turbocharger Hose Kit (Part No.26230)
from
$70.99
Gates Turbocharger Hose Kits offer the convenience of a complete solution in one kit. Not only are all the parts included, but the turbocharger hose features a construction far superior to the Original Equipment Manufacturer (OEM) equivalent.
Product Features:
See More
Product Features:
- The high-quality silicone cover provides extreme resistance to high temperatures under the hood.
- Increased durability due to multiple layers of reinforcement, resulting in longer service life
- The specially formulated oil-resistant fluoroelastomer coating prevents damage
- T-screw clamps with stainless steel band and bridge resist corrosion and provide higher torque for optimal sealing.
- The T-Bolt clamps feature a 301 stainless steel band and bridge to resist corrosion better than carbon steel bands.
- Tested to industry-leading 600,000 impulse cycles.
- T-Bolt Clamps come with a nut to minimize loosening.
Gates – Molded Turbocharger Hose Kit (Part No.26234)
from
$91.99
Gates Turbocharger Hose Kits offer the convenience of a complete solution in one kit. Not only are all the parts included, but the turbocharger hose features a construction far superior to the Original Equipment Manufacturer (OEM) equivalent.
Product Features:
See More
Product Features:
- High-quality silicone cover provides extreme temperature resistance in high-temperature under-hood conditions
- Increased durability due to multiple layers of reinforcement, resulting in longer service life
- Specially formulated oil-resistant Fluorelastomer liner prevents damage
- T-screw clamps with stainless steel band and bridge resist corrosion and provide higher torque for optimal sealing.
- The T-Bolt clamps feature a 301 stainless steel band and bridge to resist corrosion better than carbon steel bands.
- Tested to industry-leading 600,000 impulse cycles.
- T-Bolt Clamps come with a nut to minimize loosening.
Gates – Molded Turbocharger Hose Kit (Part No.26235)
from
$125.99
Gates Turbocharger Hose Kits offer the convenience of a complete solution in one kit. Not only are all the parts included, but the turbocharger hose features a construction far superior to the Original Equipment Manufacturer (OEM) equivalent.
Product Features:
See More
Product Features:
- High-quality silicone cover provides extreme temperature resistance in high-temperature under-hood conditions
- Increased durability due to multiple layers of reinforcement, resulting in longer service life
- The specially formulated, oil-resistant Fluorelastomer coating prevents damage.
- T-screw clamps with stainless steel band and bridge resist corrosion and provide higher torque for optimal sealing.
- The T-Bolt clamps feature a 301 stainless steel band and bridge to resist corrosion better than carbon steel bands.
- Tested to industry-leading 600,000 impulse cycles.
- T-Bolt Clamps come with a nut to minimize loosening.
National – Multi-Purpose Seal (Part No.710473)
from
$36.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; multi-lip
- Temperature range: -100 Deg. F to 450 Deg. F; -73 Deg. C to 232 Deg.C
- Excellent dry running capabilities
- Low coefficient of friction
- Delivers quality and reliable performance for every type of repair
Gates – Molded Turbocharger Hose Kit (Part No.26224)
from
$132.99
Gates Turbocharger Hose Kits offer the convenience of a complete solution in one kit. Not only are all the parts included, but the turbocharger hose features a construction far superior to the Original Equipment Manufacturer (OEM) equivalent.
Product Features:
See More
Product Features:
- The high-quality silicone coating offers extreme resistance to high temperatures under the hood.
- Greater durability due to multiple layers of reinforcement, resulting in a longer lifespan
- Specially formulated oil-resistant Fluorelastomer liner prevents damage
- T-bolt clamps with stainless steel band and bridge resist corrosion and provide higher torque for optimal sealing
- The T-Bolt clamps feature a 301 stainless steel band and bridge to resist corrosion better than carbon steel bands.
- Tested to industry-leading 600,000 impulse cycles.
- T-Bolt Clamps come with a nut to minimize loosening.
Gates – Molded Turbocharger Hose Kit (Part No.26233)
from
$89.99
Gates Turbocharger Hose Kits offer the convenience of a complete solution in one kit. Not only are all the parts included, but the turbocharger hose features a construction far superior to the Original Equipment Manufacturer (OEM) equivalent.
Product Features:
See More
Product Features:
- The high-quality silicone coating offers extreme resistance to high temperatures under the hood.
- Increased durability due to multiple layers of reinforcement, resulting in longer service life
- The specially formulated, oil-resistant Fluorelastomer coating prevents damage.
- T-screw clamps with stainless steel band and bridge resist corrosion and provide higher torque for optimal sealing.
- The T-Bolt clamps feature a 301 stainless steel band and bridge to resist corrosion better than carbon steel bands.
- Tested to industry-leading 600,000 impulse cycles.
- T-Bolt Clamps come with a nut to minimize loosening.
Anchor – Engine Mount: Front Right, 1 Piece (Part No.3410)
from
$109.99
This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 2007-2018
- Weight approx: 8 Lbs
Anchor – Engine Mount: Front Left, Front Right, 1 Piece (Part No.3415)
from
$119.99
Anchor 3415 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 2007-2012
- Weight approx: 12 Lbs
Anchor – Engine Mount: Front Left, 1 Piece (Part No.3409)
from
$125.99
Anchor 3409 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 2007-2012
- Weight approx: 12 Lbs
Dorman – Outer Timing Cover Case (Part No.635-180)
from
$112.99
This direct replacement timing cover matches the fit and function of the original equipment cover for a reliable repair. This part has undergone extensive testing to ensure adherence to precise design standards.
Product Features:
See More
Product Features:
- Direct replacement – this engine timing cover matches the fit and function of the original equipment cover
- Durable construction – this part is specifically designed to withstand extreme under hood temperatures for a long service life
- Cost-effective solution – offers original equipment quality at a competitive price
- Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life
Sterling Bullet 45 Engine Parts Categories
Helping You Find the Right Engine Parts for Your Sterling Bullet 45
You love your Bullet 45. So we’ve made it easier than ever to help you find Sterling Bullet 45 Engine Parts in our online catalog. Our inventory holds 12 aftermarket and OEM Engine Parts for your Sterling Bullet 45, ranging from $36.99 to $7,352.99.
We offer parts from 5 brands trusted to make quality Engine Parts for your Sterling Bullet 45.
Find your Bullet 45 Engine Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Sterling Bullet 45 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Engine Parts Brands for Your Sterling Bullet 45
Our inventory holds Engine Parts for your Sterling Bullet 45 from 5 trusted brands. You’ll find OEM and aftermarket parts from brands like Gates, Anchor, and Dorman, all of which can keep that Sterling happy.
FAQs for Sterling Bullet 45 Engine Parts
What are the most purchased Engine Parts for the Sterling Bullet 45?
Out of 12 Engine Parts for the Sterling Bullet 45, the most popular in our inventory are:
