Shelby Cobra Performance and Racing Products
Top Shelby Cobra Performance and Racing Products Categories
We carry over 31 Performance and Racing Products in inventory for the Shelby Cobra. If you’re looking for aftermarket Performance and Racing Products for your Shelby Cobra, check out all these categories:
Essential Shelby Cobra Performance and Racing Products
FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1614)
from
$25.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Die cut silicone rubber gaskets conform to out-of-flat covers
- Great for on-again/off-again situations
- Not intended for use in emission controlled vehicles.
Hays – Flywheels (Part No.12-535)
from
$499.99
Hays aluminum flywheels are manufactured from certified billet material that will not break up under the stress of high RPM and severe punishment of racing. Features replaceable steel surface insert. Precision balanced to either neutral (internal) or Detroit (external) specifications. Meets SFI specification 1.1 for racing.
Product Features:
See More
Product Features:
- Certified Billet Material
- Borg and Beck Clutch Pattern
- Long-Style Clutch Pattern
- Ring Gear Securely Mounted To Prevent Spinning
Holley – Prem Street Carbs (Avengers) (Part No.0-80570)
from
$699.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
- Optimized Street Calibration That Works Out Of The Box
- Factory Preset Electric Choke For Easy Startups
- Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
- No Unnecessary Trips Back To The Parts Store
- Limited Lifetime Warranty
- 100% Wet-Flow Tested To Assure It Arrives Ready To Run
- Street Ready; Out Of The Box
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1442)
from
$33.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Slotted bolt holes allow for easier header installation.
- Not intended for use in emission controlled vehicles.
K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2004)
from
$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.
Product Features:
See More
Product Features:
- HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
- VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
- PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
- EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
- EASY TO REMOVE: Fast and easy Wrench-Off removal
- HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
- HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
Edelbrock – Performer 289 Intake Manifold for Small-Block Ford (Part No.2121)
from
$314.99Product Features:
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 deg. Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Excellent Throttle Response and Mid-Range Power
- 50-State Street Legal
- Available in Multiple Finishes
Mr. Gasket – Alternator Bracket (Part No.5185)
from
$44.99
These brackets are made from heavy gauge steel, polished to a high luster, then chrome plated for lasting beauty. Similar in design to original equipment units.
Product Features:
See More
Product Features:
- Fits Small Block Ford 1965-’69 – OEM Style
- Polished To High Luster
- Chrome Plated For Lasting Beauty
FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1817)
from
$29.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
- With steel core to provide ultimate excellent blowout resistance.
- Not intended for use in emission controlled vehicles.
Competition Cams – Magnum Roller 1.6 Ratio Rocker Arm Set (Part No.1431-16)
from
$350.99
These Magnum Roller Rocker Arms for Ford V8 289-351W (Rail Type) 1968-89 applications are the ultimate street rocker. With a 3/8″ stud diameter and 1.6 ratio, they are designed for serious performance enthusiasts. All Magnum Roller Rocker Arms are constructed from 8620 chromemoly steel, which is a superior material that will not flex and assures maximum lift. Their roller tip reduces friction, while stiff design and superior ratio accuracy yield more effective valve lift. With a 15 to 30 horsepower increase over other rocker arms, Magnum Roller Rockers are perfect for performance applications with less than 350 lbs. open spring pressure. Don’t accept inferior products or cheap knock-offs, look for the COMP Cams logo stamped into the underside of every Magnum Rocker.
Product Features:
See More
Product Features:
- Ultimate street rocker designed for serious performance enthusiasts
- Constructed from 8620 chromemoly steel, a superior material that will not flex and assures maximum lift
- Roller tip reduces friction while stiff design and superior ratio accuracy yields more effective valve lift
- 15 to 30 horsepower increase over stock rocker arms
- Use in any applications with less than 350 lbs. open spring pressure
Energy Suspension – Control Arm Bushing Set (Part No.4.3125G)
from
$50.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.
Product Features:
See More
Product Features:
- Maintains Better Alignment While Driving
- Full Floating and Non Binding
- Fits Into the Remaining Stock Control Arms
Energy Suspension – Sway Bar End Link Kit (Part No.9.8120R)
from
$26.99
Made of high durometer, very firm, Hyper-Flex performance polyurethane. They’re economical, increase efficiency and are easy to install. Use Energy Suspension sway bar end links with sway bar bushings to get the maximum performance benefit. Combine both for the same effect as buying a larger sway bar. Together they offer a dramatic improvement in performance and handling.
Product Features:
See More
Product Features:
- Made from HYPER-Flex Polyurethane
- Allows Vehicle to Work At Maximum Efficiency
- Easy to Install
- Superior Performance and Greater Longevity
- Lasts Much Longer Than OEM Rubber End Links
Motive Gear – Differential Mini Spool (Part No.MSD44-30)
FEL-PRO Performance – Lower Intake Manifold Gasket Set: 5 Piece Set (Part No.1246)
from
$39.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Fel-Pro performance intake manifold gaskets have been tested with virtually all aftermarket cylinder head and intake manifold combinations.
- Performance intake manifold gaskets designed without a metal core, to allow engine builders to trim the gasket for exact fit on modified ports.
- Standard and Low riser
- Printoseal elastomeric sealing beads to provide extra sealing strength around the intake port.
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – Lower Intake Manifold Gasket Set: 11 Piece Set (Part No.1250)
from
$35.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1011-1)
from
$52.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
- NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
- SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
- STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
FEL-PRO Performance – Performance Cylinder Head Gasket (Part No.1020)
from
$39.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions.
Product Features:
See More
Product Features:
- Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
- Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
- Raises combustion sealing force to roughly three times that of standard head gaskets.
- Steel wire rings for the greatest combustion seal strength.
- Not intended for use in emission controlled vehicles.
Shelby Cobra Performance and Racing Products Categories
Helping You Find the Right Performance and Racing Products for Your Shelby Cobra
You love your Cobra. So we’ve made it easier than ever to help you find Shelby Cobra Performance and Racing Products in our online catalog. Our inventory holds 31 aftermarket and OEM Performance and Racing Products for your Shelby Cobra, ranging from $8.99 to $699.99.
We offer parts from 9 brands trusted to make quality Performance and Racing Products for your Shelby Cobra. Before you buy, take some time to read through customer reviews. We currently have 1,095 reviews of Shelby Cobra Performance and Racing Products from previous customers. Some of the top rated parts include Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny with 3.8 stars and Engine Valve Cover Gasket Set with 5.0 stars.
Find your Cobra Performance and Racing Products here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Shelby Cobra part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Performance and Racing Products Brands for Your Shelby Cobra
Our inventory holds Performance and Racing Products for your Shelby Cobra from 9 trusted brands. You’ll find OEM and aftermarket parts from brands like K&N, FEL-PRO Performance, and Holley, all of which can keep that Shelby happy.
We have Competition Cams parts available for your Shelby Cobra in categories like Performance Engines. Some of the top-rated Competition Cams parts in these categories are:
Top-Rated K&N Performance and Racing Products
Leading K&N Performance and Racing Products
We carry K&N brand parts for your Shelby Cobra across several catalog categories, including Performance Oil Filters. Some of our most reviewed K&N parts include:
from
$17.99
(120)
Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine
Performance Oil Filters
FAQs for Shelby Cobra Performance and Racing Products
What are the most purchased Performance and Racing Products for the Shelby Cobra?
Out of 31 Performance and Racing Products for the Shelby Cobra, the most popular in our inventory are:
from
$35.99
(4)
Lower Intake Manifold Gasket Set: 11 Piece Set
Performance Engine Intake Manifold Gaskets
from
$499.99
(45)
Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny
Performance Carburetors
from
$52.99
(2)
Cylinder Head Gasket: Steel Core Composite, Without Head Bolts
Performance Engine Cylinder Head Gaskets
What are the top-rated Shelby Cobra Performance and Racing Products?
Top-rated Performance and Racing Products for your Shelby Cobra based on customer reviews/ratings are:
from
$682.99
(6)
Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny
“great carb”
from
$39.99
(1)
Performance Cylinder Head Gasket
“Had to call and talk to 3 operators 3 separate times to get this straightened out .On item description should say 1 gasket requires 2.”
