Scion xB Serpentine Belt

Serpentine Belt for a Scion xB

Use the fitment form at the top of the page to select your exact year and engine type for your Scion xB.

• 

  Driveworks - Serpentine Belt (Part No. 750K7)

  Description

  This Driveworks v-belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks belt has been constructed and engineered to meet the stringent demands of today's automotive drive systems. The Driveworks v-belt delivers long-lasting dependable belt life.
  
  Product Features:

  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
  • Meets OEM requirements

  5.0

  Read 3 review(s)

  Review snapshot ® by PowerReviews

  5.0

  5.0

  • 5

    5

    2021-11-06

    5

    5

    I would purchase this belt again.

    I would purchase this belt again.

    Submitted 2021-11-06

    By JAS

    From Wake Forest

    Good quality and an exact fit for a 09 Toyota Camry SE

    Bottom Line recommended

    Good quality and an exact fit for a 09 Toyota Camry SE

    By JAS from Wake Forest

    BOTTOM LINE recommended

  • 5

    5

    2021-03-23

    5

    5

    Happy

    Happy

    Submitted 2021-03-23

    By Barbara

    From Undisclosed

    Just what I needed

    Bottom Line NULL

    Just what I needed

    By Barbara from Undisclosed

    BOTTOM LINE NULL

  • 5

    5

    2021-03-09

    5

    5

    Yes

    Yes

    Submitted 2021-03-09

    By kong

    From Undisclosed

    Fits good on a 2009 Camry 2.4L

    Bottom Line NULL

    Fits good on a 2009 Camry 2.4L

    By kong from Undisclosed

    BOTTOM LINE NULL

  from $25.99

  View Product
• 

  Dayco - Poly Rib Belt, Premium - Engineered to conform to high mileage, worn or misaligned drives (Part No. 5070750)

  Description

  Dayco engineered to conform to high mileage, worn or misaligned drives without a sacrifice in quiet, long-lasting performance. Constructed with Aramid reinforced EPDM compounds, it delivers more than OE required quality... it delivers the solution to troublesome drive problems. Dayco Poly-Rib Belts meet or exceed SAE J1459 and SAE J2432 specifications.
  
  Product Features:

  • Aramid noise resistant fibers embedded in the rubber make this belt run quieter in worn or misaligned pulleys
  • No-Noise Advanced Design EPDM rubber compound for quiet extended life

  4.5

  Read 3 review(s)

  Review snapshot ® by PowerReviews

  4.5

  4.5

  • 5

    5

    2021-09-03

    5

    5

    Yes I'm buying this again

    Yes I'm buying this again

    Submitted 2021-09-03

    By Jose

    From Undisclosed

    Definitely good quality

    Bottom Line NULL

    Definitely good quality

    By Jose from Undisclosed

    BOTTOM LINE NULL

  • 5

    5

    2021-07-17

    5

    5

    perfect fix

    perfect fix

    Submitted 2021-07-17

    By Wayne

    From Undisclosed

    fix perfectly for 2008 Rav4

    Bottom Line NULL

    fix perfectly for 2008 Rav4

    By Wayne from Undisclosed

    BOTTOM LINE NULL

  • 5

    5

    2021-06-19

    5

    5

    Why not better than ther other one they keep in stock

    Why not better than ther other one they keep in stock

    Submitted 2021-06-19

    By Gloria

    From Undisclosed

    No noise

    Bottom Line NULL

    No noise

    By Gloria from Undisclosed

    BOTTOM LINE NULL

  from $31.99

  View Product
• 

  Driveworks - Serpentine Belt (Part No. 763K7)

  Description

  This Driveworks v-belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks belt has been constructed and engineered to meet the stringent demands of today's automotive drive systems. The Driveworks v-belt delivers long-lasting dependable belt life.
  
  Product Features:

  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
  • Meets OEM requirements

  4.5

  Read 3 review(s)

  Review snapshot ® by PowerReviews

  4.5

  4.5

  • 5

    5

    2021-06-23

    5

    5

    It works; life is good.

    It works; life is good.

    Submitted 2021-06-23

    By Bruce

    From Undisclosed

    The belt was great. Wish it could have been 10mm longer to make it easy to install in this application, which was a pain.

    Bottom Line NULL

    The belt was great. Wish it could have been 10mm longer to make it easy to install in this application, which was a pain.

    By Bruce from Undisclosed

    BOTTOM LINE NULL

  • 5

    5

    2021-05-27

    5

    5

    Serpentine belt

    Serpentine belt

    Submitted 2021-05-27

    By Jerry

    From Undisclosed

    I put it right on and works good

    Bottom Line NULL

    I put it right on and works good

    By Jerry from Undisclosed

    BOTTOM LINE NULL

  • 5

    5

    2021-02-09

    5

    5

    I would buy this product again

    I would buy this product again

    Submitted 2021-02-09

    By norman

    From Undisclosed

    Perfect fit

    Bottom Line NULL

    Perfect fit

    By norman from Undisclosed

    BOTTOM LINE NULL

  from $26.99

  View Product
• 

  Dayco - Poly Rib Belt, Premium - Engineered to conform to high mileage, worn or misaligned drives (Part No. 5070763)

  Description

  Dayco engineered to conform to high mileage, worn or misaligned drives without a sacrifice in quiet, long-lasting performance. Constructed with Aramid reinforced EPDM compounds, it delivers more than OE required quality... it delivers the solution to troublesome drive problems. Dayco Poly-Rib Belts meet or exceed SAE J1459 and SAE J2432 specifications.
  
  Product Features:

  • Aramid noise resistant fibers embedded in the rubber make this belt run quieter in worn or misaligned pulleys
  • No-Noise Advanced Design EPDM rubber compound for quiet extended life

  4.0

  Read 3 review(s)

  Review snapshot ® by PowerReviews

  4.0

  4.0

  • 5

    5

    2021-08-12

    5

    5

    I will always get my parts from advanced auto parts

    I will always get my parts from advanced auto parts

    Submitted 2021-08-12

    By Anthony

    From Undisclosed

    I always buy my parts from advanced auto parts because they are so reliable! I get great discounts and the people are very knowledgeable!

    Bottom Line NULL

    I always buy my parts from advanced auto parts because they are so reliable! I get great discounts and the people are very knowledgeable!

    By Anthony from Undisclosed

    BOTTOM LINE NULL

  • 3

    3

    2021-06-17

    3

    3

    Belt too tight

    Belt too tight

    Submitted 2021-06-17

    By Michael

    From Undisclosed

    Belt too tight even with tension fully released

    Bottom Line NULL

    Belt too tight even with tension fully released

    By Michael from Undisclosed

    BOTTOM LINE NULL

  • 5

    5

    2021-03-13

    5

    5

    Takes two pairs of hands and patience.

    Takes two pairs of hands and patience.

    Submitted 2021-03-13

    By YodaCamry

    From Lafayette,IN

    Ok, so i will admit this was a very tight and difficult belt to get on. One of the more difficult belts i have done. Once i figured i would not be able to get it on my own i had to shout out to my ol' lady to help me. She held down the tensioner and i had the belt all routed up except for the water pump pulley, which is the last pulley you will want to slip the belt on to. I had the car slightly jacked up and was laying underneath the car. With her holding down the tensioner i was able to route the belt under the water pump pulley and had to push up and to the side with a lot of my force to slip the last part of the belt onto the water pump pulley. It was on, it's probably not impossible alone... but it will be much easier with another person to help out holding tension while the other lays under the car to route the belt onto the water pump pulley. My particular car was 2005 Camry LE 2.4l. Also before i forget, i loosened up the upper alternator bolt and removed the lower alternator bolt to get me a little more room/slack to help get the belt on. After the belt was on i was able to line the lower bolt back up by holding down the tensioner and tightening back up both the alternator bolts.

    Bottom Line recommended

    Ok, so i will admit this was a very tight and difficult belt to get on. One of the more difficult belts i have done. Once i figured i would not be able to get it on my own i had to shout out to my ol' lady to help me. She held down the tensioner and i had the belt all routed up except for the water pump pulley, which is the last pulley you will want to slip the belt on to. I had the car slightly jacked up and was laying underneath the car. With her holding down the tensioner i was able to route the belt under the water pump pulley and had to push up and to the side with a lot of my force to slip the last part of the belt onto the water pump pulley. It was on, it's probably not impossible alone... but it will be much easier with another person to help out holding tension while the other lays under the car to route the belt onto the water pump pulley. My particular car was 2005 Camry LE 2.4l. Also before i forget, i loosened up the upper alternator bolt and removed the lower alternator bolt to get me a little more room/slack to help get the belt on. After the belt was on i was able to line the lower bolt back up by holding down the tensioner and tightening back up both the alternator bolts.

    By YodaCamry from Lafayette,IN

    BOTTOM LINE recommended

  from $38.99

  View Product
• 

  Dayco - Poly Rib Belt, Premium - Engineered to conform to high mileage, worn or misaligned drives (Part No. 5040478)

  Description

  Dayco engineered to conform to high mileage, worn or misaligned drives without a sacrifice in quiet, long-lasting performance. Constructed with Aramid reinforced EPDM compounds, it delivers more than OE required quality... it delivers the solution to troublesome drive problems. Dayco Poly-Rib Belts meet or exceed SAE J1459 and SAE J2432 specifications.
  
  Product Features:

  • Aramid noise resistant fibers embedded in the rubber make this belt run quieter in worn or misaligned pulleys
  • No-Noise Advanced Design EPDM rubber compound for quiet extended life

  4.0

  Read 3 review(s)

  Review snapshot ® by PowerReviews

  4.0

  4.0

  • 5

    5

    2021-10-04

    5

    5

    Good belt

    Good belt

    Submitted 2021-10-04

    By Frederick

    From Undisclosed

    Good fit stopped the squeaking I had

    Bottom Line NULL

    Good fit stopped the squeaking I had

    By Frederick from Undisclosed

    BOTTOM LINE NULL

  • 5

    5

    2020-09-06

    5

    5

    Works well. Fit is perfect.

    Works well. Fit is perfect.

    Submitted 2020-09-06

    By Robert

    From Undisclosed

    Put it on a week ago and no problems.

    Bottom Line NULL

    Put it on a week ago and no problems.

    By Robert from Undisclosed

    BOTTOM LINE NULL

  • 5

    5

    2019-07-22

    5

    5

    Fit good. 05 Scion XB

    Fit good. 05 Scion XB

    Submitted 2019-07-22

    By Bob

    From Undisclosed

    Fit good. 05 Scion XB

    Bottom Line NULL

    Fit good. 05 Scion XB

    By Bob from Undisclosed

    BOTTOM LINE NULL

  from $21.99

  View Product
• 

  Dayco - Poly Rib Belt, Premium - Engineered to conform to high mileage, worn or misaligned drives (Part No. 5030335)

  Description

  Dayco engineered to conform to high mileage, worn or misaligned drives without a sacrifice in quiet, long-lasting performance. Constructed with Aramid reinforced EPDM compounds, it delivers more than OE required quality... it delivers the solution to troublesome drive problems. Dayco Poly-Rib Belts meet or exceed SAE J1459 and SAE J2432 specifications.
  
  Product Features:

  • Aramid noise resistant fibers embedded in the rubber make this belt run quieter in worn or misaligned pulleys
  • No-Noise Advanced Design EPDM rubber compound for quiet extended life

  4.0

  Read 3 review(s)

  Review snapshot ® by PowerReviews

  4.0

  4.0

  • 5

    5

    2020-12-29

    5

    5

    Great product

    Great product

    Submitted 2020-12-29

    By Keith

    From Undisclosed

    Great product

    Bottom Line NULL

    Great product

    By Keith from Undisclosed

    BOTTOM LINE NULL

  • 5

    5

    2020-09-18

    5

    5

    Does what it is supposed to do

    Does what it is supposed to do

    Submitted 2020-09-18

    By Christopher

    From Undisclosed

    Great belt nonoises or fitment issues

    Bottom Line NULL

    Great belt nonoises or fitment issues

    By Christopher from Undisclosed

    BOTTOM LINE NULL

  • 5

    5

    2020-06-15

    5

    5

    Replaced when doing Water Pump - Toyota Pruis

    Replaced when doing Water Pump - Toyota Pruis

    Submitted 2020-06-15

    By JD

    From Elkton MD

    When replacing the water pump I noticed the belt was cracked. Rather than put an old belt back on I picked this up and installed for my customer. Fit fine. Only time will tell but appears to be good quality.

    Bottom Line recommended

    When replacing the water pump I noticed the belt was cracked. Rather than put an old belt back on I picked this up and installed for my customer. Fit fine. Only time will tell but appears to be good quality.

    By JD from Elkton MD

    BOTTOM LINE recommended

  from $22.99

  View Product
• 

  Driveworks - Serpentine Belt (Part No. 335K3)

  Description

  This Driveworks v-belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks belt has been constructed and engineered to meet the stringent demands of today's automotive drive systems. The Driveworks v-belt delivers long-lasting dependable belt life.
  
  Product Features:

  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
  • Meets OEM requirements

  1.0

  Read 2 review(s)

  Review snapshot ® by PowerReviews

  1.0

  1.0

  • 1

    1

    2017-04-02

    1

    1

    No

    No

    Submitted 2017-04-02

    By Neftali

    From undisclosed

    Bad

    Bottom Line NULL

    Bad

    By Neftali from undisclosed

    BOTTOM LINE NULL

  • 1

    1

    2016-09-10

    1

    1

    Poor quality product

    Poor quality product

    Submitted 2016-09-10

    By Enduser

    From Florida

    The OEM belt lasted 9yrs until it snapped in half. This belt from day 1 made noises even when properly tensioned. It has a 1yr warranty, but lasted about 18 months until it split down the middle into two belts. It started making some loud squealing noises when the engine would start up.

    Bottom Line not recommended

    The OEM belt lasted 9yrs until it snapped in half. This belt from day 1 made noises even when properly tensioned. It has a 1yr warranty, but lasted about 18 months until it split down the middle into two belts. It started making some loud squealing noises when the engine would start up.

    By Enduser from Florida

    BOTTOM LINE not recommended

  from $9.99

  View Product
• 

  Driveworks - Serpentine Belt (Part No. 478K4)

  Description

  This Driveworks v-belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks belt has been constructed and engineered to meet the stringent demands of today's automotive drive systems. The Driveworks v-belt delivers long-lasting dependable belt life.
  
  Product Features:

  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
  • Meets OEM requirements

  1.0

  Read 1 review(s)

  Review snapshot ® by PowerReviews

  1.0

  1.0

  • 1

    1

    2017-04-02

    1

    1

    No

    No

    Submitted 2017-04-02

    By Neftali

    From undisclosed

    Bad

    Bottom Line NULL

    Bad

    By Neftali from undisclosed

    BOTTOM LINE NULL

  from $15.99

  View Product