Saturn Outlook Fuel and Emissions Systems
Top Saturn Outlook Fuel and Emissions Systems Categories
We carry over 118 Fuel and Emissions Systems in inventory for the Saturn Outlook. If you’re looking for aftermarket Fuel and Emissions Systems for your Saturn Outlook, check out all these categories:
Essential Saturn Outlook Fuel and Emissions Systems
GM Genuine Parts – Fuel Pressure Sensor (Part No.13500745)
from
$44.99
ACDelco GM Original Equipment Fuel Pressure Sensors monitor the fuel pressure in your vehicle’s fuel system, and are GM-recommended replacements for your vehicle’s original components. They send fuel pressure information to the powertrain control module, which uses the data to adjust fuel delivery parameters. These original equipment fuel pressure sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Signals the PCM to monitor fuel supplied to the engine
- Designed to accurately monitor fuel tank pressure
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Carquest Premium – Multi-Use Connector (Part No.PTA1383)
from
$35.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Product constructed to meet all design and operating characteristics as intended by the manufacturer.
GM Genuine Parts – Fuel Injection Throttle Body Mounting Gasket (Part No.40-5093)
from
$5.99
GM Genuine Parts Fuel Injection Throttle Body Mounting Gaskets are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These gaskets help provide an air-tight seal between the throttle body and the intake manifold, and are GM-recommended replacements for your vehicle’s original components. Replace this gasket whenever you service the throttle body, as leaks can negatively affect the air/fuel ratio and compromise performance. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Helps prevent excess air form entering the intake
- Helps seal the intake and throttle from the elements
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
Autotecnica – Fuel Tank Pump Seal (Part No.CY0516171)
from
$12.99
Autotecnica offers high-quality aftermarket parts for a wide variety of Asian and North American passenger cars and trucks, include braking, cooling, driveline, electrical, engine, fuel, HVAC, steering, and suspension categories. Manufactured in strict accordance with ISO/TS 16949 QMS specifications, Autotecnica is the smart choice. Whether you’re a DIY enthusiast or professional technician in need of replacement parts that meet OEM specifications, Autotecnica is an excellent alternative to expensive ¿Genuine¿ components.
Product Features:
See More
Product Features:
- Guaranteed fitment
- Replacement of failed fuel pump o-ring instantly restores proper pump sealing and fuel delivery
- Direct-fit OE-style o-ring seal for easy installation and long life
- Manufactured using high-quality elastomer material to withstand exposure to corrosive hydrocarbon fuel and intense vehicle heat
Dorman – Fuel Sending Unit Pigtail (Part No.645-221)
from
$58.99
This fuel sender connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this fuel sender connector matches the appearance and function of the factory hardware on specified applications.
- Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Carquest Premium – Premium GDI Seal Tool Kit (Part No.ATK-001)
from
$129.99
This premium tool kit is designed to ensure the correct installation of the combustion seal on Gasoline Direct Injectors (GDI), which require replacement any time the injector is reinstalled. This special tool allows for the expansion of the combustion seal to allow installation onto the injector’s tip and resizing tools to provide precise dimensioning to ensure proper combustion sealing. Constructed of high-quality stainless steel the tool will provide years of trouble-free service and can be used on over 100 unique styles of GDI injectors.
Product Features:
See More
Product Features:
- Includes two expansion cones
- Includes two resizing tools
- Includes one seal installation collet
- Includes hard case
- Includes instruction manual
Carquest Premium – Vapor Canister: Includes Mounting Hardware (Part No.CPN2164)
from
$197.99
CARQUEST advanced Vapor Canisters are a crucial component for reducing emissions and enhancing vehicle performance. Designed to capture and store fuel vapors from the fuel tank to ensure compliance with environmental regulations and improve overall fuel efficiency. Choose CARQUEST Vapor Canisters for enhanced performance and a greener future.
Product Features:
See More
Product Features:
- Provides management of fuel vapors, restoring proper emissions control to improve fuel efficiency and engine performance
- Manufactured using unique, superior grade activated carbon with billions of pores to provide high efficiency adsorption (not absorption) and desorption of fuel vapors
- Multi-layer design optimizes vapor flow and adsorption efficiency, allowing for quicker, more effective capture of fuel vapors
- Meets or exceeds all OEM specifications
GM Genuine Parts – Fuel Injector O-Ring Kit with Hardware for 3 Injectors (Part No.217-3096)
from
$74.99
GM Genuine Parts Fuel Injector Seal Kits are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These seals help provide liquid-tight connections between the fuel injector and related components. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Helps provide a seal to prevent fuel leaks
- Helps seal combustion chamber from the elements
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
GM Genuine Parts – Fuel Pressure Relief Valve Cap (Part No.214-1044)
from
$6.29
GM Genuine Parts Fuel Pressure Relief Valve Caps are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
Carquest Premium – Ambient Air Temperature Sensor (Part No.WTA1034)
from
$13.99
The temperature of various systems must be reported to the engine control module (ECM) as well as other operating system controllers in the vehicle. Coolant temperature, cabin temperature, exhaust temperature and ambient temperature are just a few systems reported by a temperature sensor. The temperature sensor is fed 5 volts by the systems computer, within the sensor housing will be a thermistor, or dropping resistor whose resistance value will change as the temperature surrounding it changes. Changing resistance in the circuit will change the volt signal at the processor indicating the current operating value.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
- Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
- Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
- Application matched components ensures system operation in like new condition.
GM Genuine Parts – Fuel Tank Pressure Sensor Cover (Part No.20893611)
from
$4.99
GM Genuine Parts Fuel Pressure Sensor Covers are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
Delphi – Fuel Tank Cleaning Kit (Part No.FC01)
from
$12.49
When replacing a fuel pump or module, it’s extremely important to clean the tank. Existing dirt, debris, and contamination stuck in the fuel tank can clog the brand-new strainer. Delphi’s Fuel Tank Cleaning Kit (FC01) and Tool (FC02) can help clean your fuel tank in less than five minutes. The FC01 includes a low-suds solution, cloth, and gloves that works together with the FC02 to help clean those hard to reach places without having to remove the fuel tank. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.
Product Features:
See More
Product Features:
- Helps avoid premature fuel pump failure
- Lint free towel included
- Low suds formulation
- Removes harmful contaminants from the fuel tank
GM Genuine Parts – Fuel Injection Fuel Pressure Relief Valve (Part No.88894338)
from
$4.79
GM Genuine Parts Fuel Injection Fuel Rail Pressure Relief Valves are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
Carquest Premium – Fuel Cap Tester Adapter (Part No.12422)
from
$39.99
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.
Product Features:
See More
Product Features:
- BAR Certified adapters
- Adapter check’s a fuel cap’s ability to hold pressure.
- Adapters meet EPA standards for recommended fleet coverage.
- Check adapter application chart for specific makes and models
Bosch – Manifold Absolute Pressure Sensor (Part No.0261230289)
from
$43.99
Sensores de presión de calidad de equipo original de Bosch para mediciones precisas con alta durabilidad, tiempo de respuesta rápido y amplio rango de medición
Product Features:
See More
Product Features:
- Bosch OE quality pressure sensors for accurate measurements
- Bosch OE quality pressure sensors for long term stability
- Bosch OE quality pressure sensors with a short response time
- Bosch OE quality pressure sensors with improved media resistance
GM Genuine Parts – Fuel Tank Pressureensor (Part No.13502903)
from
$82.99
Fuel Tank Pressure Sensors are GM-recommended replacements for your vehicle’s original components. These sensors help measure pressure changes within your vehicle’s fuel tank. They also help alert your vehicle’s engine management computer if a leak occurs in your vehicle’s fuel system. These original equipment sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Help measure pressure changes within fuel tank
- Help alert engine management computer if a leak occurs in fuel system
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Spectra Premium – Fuel Filler Neck (Part No.FN946)
from
$87.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tank filler necks meet or exceed the performance of the original equipment they replace.
Product Features:
See More
Product Features:
- Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
- Unit is dual coated for enhanced corrosion protection
- Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
- Unit is leak tested after production to ensure product in free from fuel and / or evaporative leaks
- Tested with OE fuel cap to prevent evaporative emission and check engine light failure
GM Genuine Parts – Fuel Injection Fuel Rail Crossover Tube (Part No.12591003)
from
$79.99
GM Genuine Parts Fuel Injection Fuel Rail Crossover Tubes are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
GM Genuine Parts – Fuel Level Sensor Kit with Seal (Part No.SK1476)
from
$115.99
ACDelco GM Original Equipment Fuel Level Sensors are GM-recommended replacements for your vehicle’s original components. These sensors measure fuel level changes in your vehicle’s fuel tank, which are displayed on the vehicle’s fuel gauge. These original equipment sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Measures fuel level changes displayed on fuel gauge
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Carquest Premium – Fuel Injection Pressure Sensor (Part No.FPA1018)
from
$121.99
Pressure sensors are used within several operating systems on the vehicle. Subjects in this category measure the pressure of both liquid and air to include air in a positive pressure and negative pressure range. Pressure sensors report out as the result of an electrical device called a strain gauge which produces an analog or digital signal output dependent on the needs of the circuit. Pressures may be very low such as barometric pressure, or extremely high such as in a high-pressure fuel injection system.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
- Robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
- Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
GM Genuine Parts – Low Pressure Fuel Feed Line Pipe Assembly (Part No.12665587)
from
$113.99
GM Genuine Parts Fuel Feed Lines are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These are a hose that transfers fuel from one point in the fuel system to another, this line is fed by the fuel pump and delivers the fuel through a fuel filter to either a carburetor or fuel injector. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Directs fuel flow to optimize performance
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
Carquest Premium – Multi-Use Connector (Part No.PTA1517)
from
$53.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Delphi – Direct Injection High Pressure Fuel Pump: With Gasket (Part No.HM10010)
from
$393.99
Demand for Gasoline Direct injection (GDi) technology globally is expected to grow in excess of 10 percent annually through 2026. Delphi uses the latest generation of OE technology for our GDi, and our GDi service program includes the OE parts, tools and know-how to service this fast-growing, high-performance technology. Delphi is a leading Tier 1 supplier of GDi systems to global OEMs. We offer multiple GDi specific training classes, a technician support hotline staffed by ASE certified technicians, and a full line of GDi high-pressure fuel pumps. Learn more about our training programs and tech hotline at 1-877-463-3574.
Product Features:
See More
Product Features:
- Capable of delivering fuel at high pressures that can range from 2,000 to 2,800 PSI
- Mechanically driven high fuel flow pump enables rail pressure build up quickly for fast start times
- Fuel delivered directly into the engine combustion chamber for increased horsepower and fuel economy
- Meets OE specifications
Bosch – Mass Airflow Sensor (Part No.0280218490)
from
$108.99
Built to OE specification provides the correct function and calibration to ensure trouble-free operation and emission compliance.
Product Features:
See More
Product Features:
- OE Technology provides the correct function and calibration to ensure trouble-free operation and emission compliance
- 100% new product; not re-manufactured or rebuilt
- Sensor and housing are calibrated and sold together ensuring precise sensor reading and optimal engine performance
- Guaranteed to match vehicle requirements for performance, drivability, fuel economy and emissions
- Can provide up to 20 percent better fuel consumption
Felpro – Fuel Injector O-Ring Kit (Part No.ES 73133)
from
$40.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Saturn Outlook Fuel and Emissions Systems Categories
Helping You Find the Right Fuel and Emissions Systems for Your Saturn Outlook
You love your Outlook. So we’ve made it easier than ever to help you find Saturn Outlook Fuel and Emissions Systems in our online catalog. Our inventory holds 118 aftermarket and OEM Fuel and Emissions Systems for your Saturn Outlook, ranging from $1.49 to $393.99.
We offer parts from 14 brands trusted to make quality Fuel and Emissions Systems for your Saturn Outlook. Before you buy, take some time to read through customer reviews. We currently have 2,924 reviews of Saturn Outlook Fuel and Emissions Systems from previous customers. Some of the top rated parts include Locking Fuel Tank Cap with 4.6 stars and Locking Fuel Tank Cap with 4.1 stars.
Find your Outlook Fuel and Emissions Systems here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Saturn Outlook part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Fuel and Emissions Systems Brands for Your Saturn Outlook
Our inventory holds Fuel and Emissions Systems for your Saturn Outlook from 14 trusted brands. You’ll find OEM and aftermarket parts from brands like Bosch, Carquest Premium, and DENSO, all of which can keep that Saturn happy.
We have NTK parts available for your Saturn Outlook in categories like Oxygen Sensors. Some of the top-rated NTK parts in these categories are:
Top-Rated Bosch Fuel and Emissions Systems
Leading Bosch Fuel and Emissions Systems
We carry Bosch brand parts for your Saturn Outlook across several catalog categories, including Oxygen Sensors. Some of our most reviewed Bosch parts include:
FAQs for Saturn Outlook Fuel and Emissions Systems
What are the most purchased Fuel and Emissions Systems for the Saturn Outlook?
Out of 118 Fuel and Emissions Systems for the Saturn Outlook, the most popular in our inventory are:
from
$69.99
This product is not rated
Oxygen Sensor: 4 Wire, 25.87" Long, Heated, Universal
Oxygen Sensors
What are the top-rated Saturn Outlook Fuel and Emissions Systems?
Top-rated Fuel and Emissions Systems for your Saturn Outlook based on customer reviews/ratings are:
from
$27.49
(39)
Locking Fuel Tank Cap
“The locking gas cap has been on the car for about 2 weeks–and we LOVE it. My dad broke the factory cap-making my check engine light come on.
I we”
from
$23.99
(12)
Locking Fuel Tank Cap
“With gas prices on the way to the moon, if your vehicle doesn’t have a locking fuel door, you best be getting a locking gas cap. Had a leading brand c”
